Pixar's Tractor with HTTPS and FreeIPA/PAM Authentication

A framework for running Pixar's Tractor with HTTPS authentication, allowing secure login via FreeIPA or another PAM module. The containers need some privileged access, as

The Tractor container relies on the host's FreeIPA enrollment for authentication (FreeIPA is picky about the FQDN)
Tractor does not respect X-Forwarded-For headers, so the proxy container uses the host network in order to serve as a transparent, TLS-terminating proxy

Setup

Host machine

On the host machine (this has been tested with Rocky 8.8), install Docker and Docker Compose. Enroll the host in FreeIPA or another authentication service. This configuration uses an HBAC (Host-Based Access Control) rule allowing all users to log in via a custom service named tractor-sssd. This allows Tractor web console login but restricts login via SSH.

The NGINX container uses iptables to configure its transparent proxy, but does not have permission to modprobe needed kernel modules on the host system. To enable them on the running system, run sudo modprobe iptable_mangle x_tables xt_mark

To enable these modules on boot, create the file /etc/modules-load.d/tractor-https.conf with the following contents:

iptable_mangle
x_tables
xt_mark

Tractor Engine configuration

Clone this repo. Place all of your Tractor configuration files in the config/ directory (in this repo). Here is a list of the files Tractor expects:

blade.config
crews.config
db.config
limits.config
menus.config
postgresql.conf
shared.linux.envkeys
shared.macosx.envkeys
shared.windows.envkeys
tractor.config
trSiteDashboardFunctions.js
trSiteFunctions.py
trSiteLdapLoginValidator.py
trSiteLoginValidator.py

To avoid conflicts with the host-networked proxy container listening on port 80, the Tractor Engine must run on port 8080 (or another port of your choice, you'd need to configure this manually). To do this, set the ListenerPort in config/tractor.config:

{
    ...
    "ListenerPort": 8080,
    ...
}

Create a file named env in the main directory. If you plan on using the crew sync module, define WRANGLER_GROUP and ADMIN_GROUP here. These are the unix group names the crew sync service will check. If you use the PIXAR_LICENSE_FILE variable, you can also define it here. Example configuration:

ADMIN_GROUP=admin
PIXAR_LICENSE_FILE=9010@licenseserver
WRANGLER_GROUP=wrangler

Create a file named admin_user.txt. This contains the credentials that the crew sync module will use to auto-reload the crews config after the groups are updated in FreeIPA. Make sure to appropriatly set permissions on this file so it can only be seen by the docker group and other necessary admin users:

username
password

Place your Tractor installation RPM obtained from Pixar in the tractor-base folder. (Docker looks for a file named Tractor-2.4.x86_64.rpm)

Name your SSL certificate files cert.crt and cert.key and place them in the certs folder

After all this, your directory should look like this:

.
├── admin_user.txt
├── certs
│   ├── cert.crt
│   └── cert.key
├── config
│   ├── blade.config 
│   ├── crews.config
│   ├── db.config
│   ├── limits.config
│   ├── menus.config
│   ├── postgresql.conf
│   ├── shared.linux.envkeys
│   ├── shared.macosx.envkeys
│   ├── shared.windows.envkeys
│   ├── tractor.config
│   ├── trSiteDashboardFunctions.js
│   ├── trSiteFunctions.py
│   ├── trSiteLdapLoginValidator.py
│   └── trSiteLoginValidator.py
├── crew-sync.sh
├── docker-compose.yml
├── env
├── proxy
│   ├── networking.sh
│   └── nginx.conf
├── README.md
├── tractor-base
│   ├── Dockerfile
│   ├── sssd-tractor
│   └── Tractor-2.4.x86_64.rpm
└── TrHttpRPC.py.patch

FreeIPA Authentication

In config/crews.config, change ValidLogins to external logins, and set the SitePasswordValidator to internal:PAM:sssd-tractor:

{
    ...
    "Crews": {
        "ValidLogins": ["@externlogins"],
        ...
    },
    ...
    "SitePasswordValidator": "internal:PAM:sssd-tractor"
}

Using the crew-sync Module

The crew-sync module checks for updates to the unix groups defined in the env file and populates the files config/admins and config/wranglers with those usernames. To include these files into your config/crews.config make the following changes:

{
    ...
    "Crews": {
    ...
        "Wranglers": ["@merge('wranglers')","hard-coded users or other config"],
        "Administrators": ["@merge('admins')","hard-coded users or other config"]
    },
    ...
}

To disable the crew sync module, comment out the crew-sync block in docker-compose.yml.

Launching Tractor Engine

Finally, you should be able to build and start the containers:

docker compose build
docker compose up -d
# check that things are running properly
docker compose logs

Tractor Blade Configuration

In order for the Tractor blades to properly communicate with the engine over SSL, we need to use the beta Python 3 build of Tractor. As of this writing, this build can be downloaded from the RenderMan forums. The Python 3 API is also included with recent RenderMan Pro Server installations.

The file TrHttpRPC.py needs to be patched to utilize an SSL-secured connection using the patch included in this git repo (TrHttpRPC.py.patch). This relies on the OpenSSL 10 libraries, which can be installed through the package manager (below commands tested on Rocky 8.8).

To patch the RenderMan Pro Server installation:

dnf install -y compat-openssl10
patch /opt/pixar/RenderManProServer-XX.Y/bin/tractor/base/TrHttpRPC.py ./TrHttpRPC.py.patch

To patch the Tractor 3 beta blade:

dnf install -y compat-openssl10
# as of this writing, the beta build is `tractor-blade3b1.2308.pyz`
# unzip the tractor-blade python executable
mkdir tractor-blade3b1.2308
unzip tractor-blade3b1.2308.pyz -d tractor-blade3b1.2308
cd tractor-blade3b1.2308
# patch the file
patch ./TrHttpRPC.py path/to/TrHttpRPC.py.patch
# re-zip the executable (this assumes that you have rmanpy3 in your PATH)
cd ../
rmanpy3 -m zipapp tractor-blade3b1.2308 -p '/usr/bin/env rmanpy3'

In the flags for the tractor-blade process (configured via sysconfig or otherwise), make sure to specify the port number and fully qualified hostname of the Tractor engine (SSL requires the hostname to be fully qualified), e.g.

path/to/tractor-blade3b1.pyz --engine=tractor-engine.example.com:443

References

License

scottdmilner/tractor-https

ErrorLooks like something went wrong!

About

Topics

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages