Skip to content

Arduino leonardo as USB converter for Logitech Trackman MarbleFX

Notifications You must be signed in to change notification settings

seife/marble_fx

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

62 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

USB converter for Trackman MarbleFX

The famous Logitech Trackman MarbleFX trackball has four buttons, of which the 4th (red) button was used to emulate a scroll wheel. To enable this, the trackball needs to be switched into a special Logitech PS/2 protocol, which enables the reporting of the additional button. This works well on Linux, but only if the trackball is connected via a native PS/2 port.

If a simple PS/2 <-> USB converter is used, the trackball operates in "legacy" 3-button Mouse mode, because those converters do not know how to switch and interpret the logitech protocol.

This project uses an Arduino Leonardo (or compatible boards, like the CMCU Beetle) to interface the TrackmanFX's PS/2 port to USB HID.

The smallest boards can be integrated directly into the trackball, so that the TrackmanFX appears as a "native" USB device.

One example of such a modification is here.

The default mode of operation emulates the scroll wheel inside the microcontroller and needs no additional software setup. If you want the full experience of two-dimensional scrolling with the trackball when pressing the red button, you can pull pin 6 to ground and then configure button 8 for scrolling with xinput on X11, for example, just like with the native PS/2 connection.

About

Arduino leonardo as USB converter for Logitech Trackman MarbleFX

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published