Add support for command guessing in Rails 4 #181
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Rails 4 issues the command
rake_test_loader.rb test/{controllers,mailers,functional}/**/*_test.rb
to run functional tests. This adds a second clause to the case statement
to properly guess that these are functional tests.
Adds tests for each of the basic kinds of tests Rails 4 runs.
|
It looks like the build is broken for reasons that pre-date my change. I may try to dig into those failures tomorrow if no one has fixed them by then. |
|
Thanks. Yeah, the build is broken due mostly to some added Ruby interpreters on CI. The travis build server was lagging behind terribly with the builds and I didn't have the patience to wait for him friday evening. For your code all the "supported" versions (1.9.2, 1.9.3, 2.0.0) passed though, it seems I broke something for the non-compatible ones (rbx-1.9 and jruby-1.9 should work very soon though as they both added the Coverage module) |
colszowka
added a commit
that referenced
this pull request
Dec 10, 2012
Add support for command guessing in Rails 4
jsonn
pushed a commit
to jsonn/pkgsrc
that referenced
this pull request
Mar 15, 2014
v0.8.2, 2013-11-20 ([changes](simplecov-ruby/simplecov@v0.8.1...v0.8.2)) ===================== ## Bugfixes * Replaced the locking behaviour [via lockfile gem](simplecov-ruby/simplecov#185) with plain Ruby explicit file locking when merging results. This should make simplecov merging to behave well on Windows again. See [#258](simplecov-ruby/simplecov#258) and [#223](simplecov-ruby/simplecov#223) (thanks to @tomykaira) v0.8.1, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.8.0...v0.8.1)) ===================== ## Bugfixes * Fixed a regression introduced in 0.8.0 - the Forwardable STDLIB module is now required explicitly. See [#256](simplecov-ruby/simplecov#256) (thanks to @kylev) v0.8.0, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.7.1...v0.8.0)) ===================== **Note: Yanked the same day because of the regression that 0.8.1 fixes, see above** ## TL;DR It's been way too long since the last official release 0.7.1, but this was partly due to it proving itself quite stable in most circumstances. This release brings various further stability improvements to result set merging (especially when working with parallel_tests), the configuration, source file encodings, and command name guessing. The 0.8 line is the last one to cooperate with Ruby < 1.9. Starting with 0.9, SimpleCov will assume to be running in Ruby 1.9+, and will not try to detect or bail silently on older Ruby versions. An appropriate deprecation warning has been added. ## Features * Configuration blocks now have access to variables and methods outside of the block's scope. See [#238](simplecov-ruby/simplecov#238) (thanks to @ms-tg) * You can now have a global `~/.simplecov` configuration file. See [#195](simplecov-ruby/simplecov#195) (thanks to @spagalloco) * simplecov-html now uses the MIT-licensed colorbox plugin. Some adjustments when viewing source files, including retaining the currently open file on refresh have been added. See [simplecov-html #15](simplecov-ruby/simplecov-html#15) (thanks to @chetan) * Adds support for Rails 4 command guessing, removes default group `vendor/plugins`. See [#181](simplecov-ruby/simplecov#181) and [#203](simplecov-ruby/simplecov#203) (thanks to @semanticart and @phallstrom) * You can now load simplecov without the default settings by doing `require 'simplecov/no_defaults'` or setting `ENV['SIMPLECOV_NO_DEFAULTS']`. Check `simplecov/defaults` to see what preconfigurations are getting dropped by using this. See [#209](simplecov-ruby/simplecov#209) (thanks to @ileitch) * The result set merging now uses the `lockfile` gem to avoid race conditions. See [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol). * Automatically detect the usage of parallel_tests and adjust the command name with the test env number accordingly, See [#64](simplecov-ruby/simplecov#64) and [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol). ## Enhancements * Rename adapters to "profiles" given that they are bundles of settings. The old adapter methods are deprecated, but remain available for now. See [#207](simplecov-ruby/simplecov#207) (thanks to @mikerobe) * Tweaks to the automatic test suite naming. In particular, `rspec/features` should now be correctly attributed to RSpec, not Cucumber. See [#212](simplecov-ruby/simplecov#212) (thanks to @ersatzryan and @betelgeuse) * MiniTest should now be identified correctly by the command name guesser. See [#244](simplecov-ruby/simplecov#244) (thanks to @envygeeks) * Makes SimpleCov resilient to inclusion of mathn library. See [#175](simplecov-ruby/simplecov#175) and [#140](simplecov-ruby/simplecov#140) (thanks to @scotje) * Allow coverage_dir to be an absolute path. * See [#190](simplecov-ruby/simplecov#190) (thanks to @jshraibman-mdsol) * The internal cucumber test suite now uses Capybara 2. See [#206](simplecov-ruby/simplecov#206) (thanks to @infertux) * Work-arounds for the Coverage library shipped in JRuby 1.6 to behave in line with MRI. See [#174](simplecov-ruby/simplecov#174) (thanks to @grddev) * Fix warning: instance variable @exit_status not initialized. See [#242](simplecov-ruby/simplecov#242) and [#213](simplecov-ruby/simplecov#213) (thanks to @sferik and @infertux) ## Bugfixes * Correct result calculations for people using :nocov: tags. See [#215](simplecov-ruby/simplecov#215) (thanks to @aokolish) * Average hits per line for groups of files is now computed correctly. See [#192](http://github.com/colszowka/simplecov/pull/192) and [#179](http://github.com/colszowka/simplecov/issues/179) (thanks to @Graysonwright) * Compatability with BINARY internal encoding. See [#194](simplecov-ruby/simplecov#194) and [#127](simplecov-ruby/simplecov#127) (thanks to @justfalter) * Special characters in `SimpleCov.root` are now correctly escaped before being used as a RegExp. See [#204](simplecov-ruby/simplecov#204) and [#237](simplecov-ruby/simplecov#237) (thanks to @rli9)
jsonn
pushed a commit
to jsonn/pkgsrc
that referenced
this pull request
Mar 17, 2014
v0.8.2, 2013-11-20 ([changes](simplecov-ruby/simplecov@v0.8.1...v0.8.2)) ===================== ## Bugfixes * Replaced the locking behaviour [via lockfile gem](simplecov-ruby/simplecov#185) with plain Ruby explicit file locking when merging results. This should make simplecov merging to behave well on Windows again. See [#258](simplecov-ruby/simplecov#258) and [#223](simplecov-ruby/simplecov#223) (thanks to @tomykaira) v0.8.1, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.8.0...v0.8.1)) ===================== ## Bugfixes * Fixed a regression introduced in 0.8.0 - the Forwardable STDLIB module is now required explicitly. See [#256](simplecov-ruby/simplecov#256) (thanks to @kylev) v0.8.0, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.7.1...v0.8.0)) ===================== **Note: Yanked the same day because of the regression that 0.8.1 fixes, see above** ## TL;DR It's been way too long since the last official release 0.7.1, but this was partly due to it proving itself quite stable in most circumstances. This release brings various further stability improvements to result set merging (especially when working with parallel_tests), the configuration, source file encodings, and command name guessing. The 0.8 line is the last one to cooperate with Ruby < 1.9. Starting with 0.9, SimpleCov will assume to be running in Ruby 1.9+, and will not try to detect or bail silently on older Ruby versions. An appropriate deprecation warning has been added. ## Features * Configuration blocks now have access to variables and methods outside of the block's scope. See [#238](simplecov-ruby/simplecov#238) (thanks to @ms-tg) * You can now have a global `~/.simplecov` configuration file. See [#195](simplecov-ruby/simplecov#195) (thanks to @spagalloco) * simplecov-html now uses the MIT-licensed colorbox plugin. Some adjustments when viewing source files, including retaining the currently open file on refresh have been added. See [simplecov-html #15](simplecov-ruby/simplecov-html#15) (thanks to @chetan) * Adds support for Rails 4 command guessing, removes default group `vendor/plugins`. See [#181](simplecov-ruby/simplecov#181) and [#203](simplecov-ruby/simplecov#203) (thanks to @semanticart and @phallstrom) * You can now load simplecov without the default settings by doing `require 'simplecov/no_defaults'` or setting `ENV['SIMPLECOV_NO_DEFAULTS']`. Check `simplecov/defaults` to see what preconfigurations are getting dropped by using this. See [#209](simplecov-ruby/simplecov#209) (thanks to @ileitch) * The result set merging now uses the `lockfile` gem to avoid race conditions. See [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol). * Automatically detect the usage of parallel_tests and adjust the command name with the test env number accordingly, See [#64](simplecov-ruby/simplecov#64) and [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol). ## Enhancements * Rename adapters to "profiles" given that they are bundles of settings. The old adapter methods are deprecated, but remain available for now. See [#207](simplecov-ruby/simplecov#207) (thanks to @mikerobe) * Tweaks to the automatic test suite naming. In particular, `rspec/features` should now be correctly attributed to RSpec, not Cucumber. See [#212](simplecov-ruby/simplecov#212) (thanks to @ersatzryan and @betelgeuse) * MiniTest should now be identified correctly by the command name guesser. See [#244](simplecov-ruby/simplecov#244) (thanks to @envygeeks) * Makes SimpleCov resilient to inclusion of mathn library. See [#175](simplecov-ruby/simplecov#175) and [#140](simplecov-ruby/simplecov#140) (thanks to @scotje) * Allow coverage_dir to be an absolute path. * See [#190](simplecov-ruby/simplecov#190) (thanks to @jshraibman-mdsol) * The internal cucumber test suite now uses Capybara 2. See [#206](simplecov-ruby/simplecov#206) (thanks to @infertux) * Work-arounds for the Coverage library shipped in JRuby 1.6 to behave in line with MRI. See [#174](simplecov-ruby/simplecov#174) (thanks to @grddev) * Fix warning: instance variable @exit_status not initialized. See [#242](simplecov-ruby/simplecov#242) and [#213](simplecov-ruby/simplecov#213) (thanks to @sferik and @infertux) ## Bugfixes * Correct result calculations for people using :nocov: tags. See [#215](simplecov-ruby/simplecov#215) (thanks to @aokolish) * Average hits per line for groups of files is now computed correctly. See [#192](http://github.com/colszowka/simplecov/pull/192) and [#179](http://github.com/colszowka/simplecov/issues/179) (thanks to @Graysonwright) * Compatability with BINARY internal encoding. See [#194](simplecov-ruby/simplecov#194) and [#127](simplecov-ruby/simplecov#127) (thanks to @justfalter) * Special characters in `SimpleCov.root` are now correctly escaped before being used as a RegExp. See [#204](simplecov-ruby/simplecov#204) and [#237](simplecov-ruby/simplecov#237) (thanks to @rli9)
jsonn
pushed a commit
to jsonn/pkgsrc
that referenced
this pull request
Oct 11, 2014
v0.8.2, 2013-11-20 ([changes](simplecov-ruby/simplecov@v0.8.1...v0.8.2)) ===================== ## Bugfixes * Replaced the locking behaviour [via lockfile gem](simplecov-ruby/simplecov#185) with plain Ruby explicit file locking when merging results. This should make simplecov merging to behave well on Windows again. See [#258](simplecov-ruby/simplecov#258) and [#223](simplecov-ruby/simplecov#223) (thanks to @tomykaira) v0.8.1, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.8.0...v0.8.1)) ===================== ## Bugfixes * Fixed a regression introduced in 0.8.0 - the Forwardable STDLIB module is now required explicitly. See [#256](simplecov-ruby/simplecov#256) (thanks to @kylev) v0.8.0, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.7.1...v0.8.0)) ===================== **Note: Yanked the same day because of the regression that 0.8.1 fixes, see above** ## TL;DR It's been way too long since the last official release 0.7.1, but this was partly due to it proving itself quite stable in most circumstances. This release brings various further stability improvements to result set merging (especially when working with parallel_tests), the configuration, source file encodings, and command name guessing. The 0.8 line is the last one to cooperate with Ruby < 1.9. Starting with 0.9, SimpleCov will assume to be running in Ruby 1.9+, and will not try to detect or bail silently on older Ruby versions. An appropriate deprecation warning has been added. ## Features * Configuration blocks now have access to variables and methods outside of the block's scope. See [#238](simplecov-ruby/simplecov#238) (thanks to @ms-tg) * You can now have a global `~/.simplecov` configuration file. See [#195](simplecov-ruby/simplecov#195) (thanks to @spagalloco) * simplecov-html now uses the MIT-licensed colorbox plugin. Some adjustments when viewing source files, including retaining the currently open file on refresh have been added. See [simplecov-html #15](simplecov-ruby/simplecov-html#15) (thanks to @chetan) * Adds support for Rails 4 command guessing, removes default group `vendor/plugins`. See [#181](simplecov-ruby/simplecov#181) and [#203](simplecov-ruby/simplecov#203) (thanks to @semanticart and @phallstrom) * You can now load simplecov without the default settings by doing `require 'simplecov/no_defaults'` or setting `ENV['SIMPLECOV_NO_DEFAULTS']`. Check `simplecov/defaults` to see what preconfigurations are getting dropped by using this. See [#209](simplecov-ruby/simplecov#209) (thanks to @ileitch) * The result set merging now uses the `lockfile` gem to avoid race conditions. See [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol). * Automatically detect the usage of parallel_tests and adjust the command name with the test env number accordingly, See [#64](simplecov-ruby/simplecov#64) and [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol). ## Enhancements * Rename adapters to "profiles" given that they are bundles of settings. The old adapter methods are deprecated, but remain available for now. See [#207](simplecov-ruby/simplecov#207) (thanks to @mikerobe) * Tweaks to the automatic test suite naming. In particular, `rspec/features` should now be correctly attributed to RSpec, not Cucumber. See [#212](simplecov-ruby/simplecov#212) (thanks to @ersatzryan and @betelgeuse) * MiniTest should now be identified correctly by the command name guesser. See [#244](simplecov-ruby/simplecov#244) (thanks to @envygeeks) * Makes SimpleCov resilient to inclusion of mathn library. See [#175](simplecov-ruby/simplecov#175) and [#140](simplecov-ruby/simplecov#140) (thanks to @scotje) * Allow coverage_dir to be an absolute path. * See [#190](simplecov-ruby/simplecov#190) (thanks to @jshraibman-mdsol) * The internal cucumber test suite now uses Capybara 2. See [#206](simplecov-ruby/simplecov#206) (thanks to @infertux) * Work-arounds for the Coverage library shipped in JRuby 1.6 to behave in line with MRI. See [#174](simplecov-ruby/simplecov#174) (thanks to @grddev) * Fix warning: instance variable @exit_status not initialized. See [#242](simplecov-ruby/simplecov#242) and [#213](simplecov-ruby/simplecov#213) (thanks to @sferik and @infertux) ## Bugfixes * Correct result calculations for people using :nocov: tags. See [#215](simplecov-ruby/simplecov#215) (thanks to @aokolish) * Average hits per line for groups of files is now computed correctly. See [#192](http://github.com/colszowka/simplecov/pull/192) and [#179](http://github.com/colszowka/simplecov/issues/179) (thanks to @Graysonwright) * Compatability with BINARY internal encoding. See [#194](simplecov-ruby/simplecov#194) and [#127](simplecov-ruby/simplecov#127) (thanks to @justfalter) * Special characters in `SimpleCov.root` are now correctly escaped before being used as a RegExp. See [#204](simplecov-ruby/simplecov#204) and [#237](simplecov-ruby/simplecov#237) (thanks to @rli9)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Rails 4 issues the command
to run functional tests.
This adds a second clause to the case statement to properly guess that these are functional tests. I also added tests for each of the basic kinds of tests Rails 4 runs (integration/unit/functional).
I left the regex a little flexible in case the ordering of the "controllers,mailers,functional" part changes. It should still be plenty specific enough.
Thank you for a fantastic library.