Skip to content

Home

Jump to bottom
Marius Weber edited this page Feb 5, 2021 · 2 revisions

It is a low jitter trigger box that main application is 50Hz/60 magnetic field noise cancellation. It can be used with Stabilizer to drive a pair of coils with harmonics of 50/60Hz whose amplitude and phase are chosen to cancel out the mains-induced noise. Features:

  • 115/230V IEC inlet, selectable during ordering
    • Board takes a 9-12 V (RMS) AC input via a 2.1mm x 5.5mm x 12mm barrel connector.
  • 50/60Hz, selectable during ordering
  • Selectable filerted/unfiltred mains trigger via 2.51 mm jumper.
    • The jumper must be placed to select one of the modes. The trigger will not operate without a jumper.
  • Metal stand-alone box
  • Two SMA outputs
    • 0 to 5 V trigger signal

Line_trigger

Main Sinara Wiki

Clone this wiki locally