MailKit is a cross-platform mail client library built on top of MimeKit.
- SASL Authentication
- DIGEST-MD5
- CRAM-MD5
- LOGIN
- PLAIN
- XOAUTH2 (partial support - you need to fetch the auth tokens yourself)
- SMTP Client
- Supports all of the SASL mechanisms listed above.
- Supports SSL-wrapped connections via the "smtps" protocol.
- Supports the STARTTLS extension.
- Supports client SSL/TLS certificates.
- Supports the 8BITMIME and BINARYMIME extensions.
- Supports the PIPELINING extension.
- Parses the SIZE extension value.
- All APIs are cancellable.
- POP3 Client
- Supports all of the SASL mechanisms listed above.
- Also supports authentication via APOP and USER/PASS.
- Supports SSL-wrapped connections via the "pops" protocol.
- Supports the STLS extension.
- Supports client SSL/TLS certificates.
- Supports the UIDL command.
- All APIs are cancellable.
- IMAP4 Client
- Supports all of the SASL mechanisms listed above.
- Supports SSL-wrapped connections via the "imaps" protocol.
- Supports client SSL/TLS certificates.
- Supports the following extensions:
- LITERAL+
- NAMESPACE
- CHILDREN
- LOGINDISABLED
- STARTTLS
- MULTIAPPEND
- UNSELECT
- UIDPLUS
- CONDSTORE
- ESEARCH
- SASL-IR
- COMPRESS
- ENABLE
- QRESYNC
- SORT
- THREAD
- ESORT (partial)
- SPECIAL-USE
- MOVE
- XLIST
- X-GM-EXT1 (X-GM-MSGID, X-GM-THRID and X-GM-RAW)
- All APIs are cancellable.
- Client-side sorting and threading of messages.
- SASL Authentication
- Improve XOAUTH2
- ANONYMOUS
- GSSAPI
- KERBEROS_v4
- NTLM
- SCRAM-*
- SMTP Client
- CHUNKING (hmmm, doesn't really seem all that useful...)
- Throw an exception if the MimeMessage is larger than the SIZE value?
- Async APIs
- POP3 Client
- PIPELINING
- Async APIs
- IMAP4 Client
- Extensions:
- QUOTA
- IDLE
- BINARY
- CATENATE
- LIST-EXTENDED
- CONVERT
- METADATA
- NOTIFY
- FILTERS
- LIST-STATUS
- MULTISEARCH
- GMail Extensions
- X-GM-LABELS
- Async APIs
- Extensions:
- Maildir
- Thunderbird mbox folder trees
The main goal of this project is to optimize for mobile platforms such as Android, iOS, and eventually Windows Phone 8. This means that IMAP extensions such as CONDSTORE, QRESYNC, and any other extensions that allow clients to reduce network traffic (IDLE? ESEARCH? COMPRESS?) will take priority over any of the other extensions. After that, the most common extensions will take precedence over the lesser-used extensions until finally all of the extensions anyone actually cares about are implemented.
At some point in the (near?) future, I'd also like to start using async/await. For those who are stuck in .NET 4.0, Microsoft has released an Async Targetting Pack on NuGet which allows the use of the async/await keywords on pre-.NET 4.5 platforms. If you haven't already, I'd highly recommend installing it.
MailKit is Copyright (C) 2013-2014 Xamarin Inc. and is licensed under the MIT license:
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
The easiest way to install MimeKit is via NuGet.
In Visual Studio's Package Manager Console, simply enter the following command:
Install-Package MailKit
First, you'll need to clone MailKit, MimeKit, Bouncy Castle, and Portable.Text.Encoding from my GitHub repository:
git clone https://github.com/jstedfast/MailKit.git
git clone https://github.com/jstedfast/MimeKit.git
git clone https://github.com/jstedfast/bc-csharp.git
git clone https://github.com/jstedfast/Portable.Text.Encoding.git
Currently, MailKit (through its use of MimeKit) depends on the visual-studio-2010 branch of bc-csharp for the Visual Studio 2010 project files that I've added (to replace the Visual Studio 2003 project files). To switch to that branch,
cd bc-csharp
git checkout -b visual-studio-2010 origin/visual-studio-2010
In the top-level MailKit source directory, there are three solution files: MailKit.sln, MailKit.Net45.sln and MailKit.Mobile.sln.
- MailKit.Mobile.sln just includes the Xamarin.iOS and Xamarin.Android projects.
- MailKit.Net40.sln just includes the .NET Framework 4.0 C# project (MailKit/MailKit.csproj)
- MailKit.sln includes everything that is in the MailKit.Net40.sln solution as well as the projects for Xamarin.Android, Xamarin.iOS, and Xamarin.Mac.
If you don't have the Xamarin products, you'll probably want to open the MailKit.Net45.sln instead of MailKit.sln.
Once you've opened the appropriate MailKit solution file in either Xamarin Studio or Visual Studio 2010+ (either will work), you can simply choose the Debug or Release build configuration and then build.
Note: The Release build will generate the xml API documentation, but the Debug build will not.
One of the more common operations that MailKit is meant for is sending email messages.
using System;
using System.Net;
using System.Threading;
using MailKit.Net.Smtp;
using MailKit;
using MimeKit;
namespace TestClient {
class Program
{
public static void Main (string[] args)
{
var message = new MimeMessage ();
message.From.Add (new MailboxAddress ("Joey Tribbiani", "joey@friends.com"));
message.To.Add (new MailboxAddress ("Mrs. Chanandler Bong", "chandler@friends.com"));
message.Subject = "How you doin'?";
message.Body = new TextPart ("plain") {
Text = @"Hey Chandler,
I just wanted to let you know that Monica and I were going to go play some paintball, you in?
-- Joey"
};
using (var client = new SmtpClient ()) {
var credentials = new NetworkCredential ("joey", "password");
// Note: if the server requires SSL-on-connect, use the "smtps" protocol instead
var uri = new Uri ("smtp://smtp.gmail.com:587");
using (var cancel = new CancellationTokenSource ()) {
client.Connect (uri, cancel.Token);
// Note: since we don't have an OAuth2 token, disable
// the XOAUTH2 authentication mechanism.
client.AuthenticationMechanisms.Remove ("XOAUTH2");
// Note: only needed if the SMTP server requires authentication
client.Authenticate (credentials, cancel.Token);
client.Send (message, cancel.Token);
client.Disconnect (true, cancel.Token);
}
}
}
}
}One of the other main uses of MailKit is retrieving messages from pop3 servers.
using System;
using System.Net;
using System.Threading;
using MailKit.Net.Pop3;
using MailKit;
using MimeKit;
namespace TestClient {
class Program
{
public static void Main (string[] args)
{
using (var client = new Pop3Client ()) {
var credentials = new NetworkCredential ("joey", "password");
// Note: if the server requires SSL-on-connect, use the "pops" protocol instead
var uri = new Uri ("pop://mail.friends.com");
using (var cancel = new CancellationTokenSource ()) {
client.Connect (uri, cancel.Token);
// Note: since we don't have an OAuth2 token, disable
// the XOAUTH2 authentication mechanism.
client.AuthenticationMechanisms.Remove ("XOAUTH2");
client.Authenticate (credentials, cancel.Token);
int count = client.GetMessageCount (cancel.Token);
for (int i = 0; i < count; i++) {
var message = client.GetMessage (i, cancel.Token);
Console.WriteLine ("Subject: {0}", message.Subject);
}
client.Disconnect (true, cancel.Token);
}
}
}
}
}More important than POP3 support is the IMAP support. Here's a simple use-case of retreiving messages from an IMAP server:
using System;
using System.Net;
using System.Threading;
using MailKit.Net.Imap;
using MailKit.Search;
using MailKit;
using MimeKit;
namespace TestClient {
class Program
{
public static void Main (string[] args)
{
using (var client = new ImapClient ()) {
var credentials = new NetworkCredential ("joey", "password");
var uri = new Uri ("imaps://imap.gmail.com");
using (var cancel = new CancellationTokenSource ()) {
client.Connect (uri, cancel.Token);
// Note: since we don't have an OAuth2 token, disable
// the XOAUTH2 authentication mechanism.
client.AuthenticationMechanisms.Remove ("XOAUTH");
client.Authenticate (credentials, cancel.Token);
// The Inbox folder is always available on all IMAP servers...
var inbox = client.Inbox;
inbox.Open (FolderAccess.ReadOnly, cancel.Token);
Console.WriteLine ("Total messages: {0}", inbox.Count);
Console.WriteLine ("Recent messages: {0}", inbox.Recent);
for (int i = 0; i < inbox.Count; i++) {
var message = inbox.GetMessage (i, cancel.Token);
Console.WriteLine ("Subject: {0}", message.Subject);
}
client.Disconnect (true, cancel.Token);
}
}
}
}
}However, you probably want to do more complicated things with IMAP such as fetching summary information so that you can display a list of messages in a mail client without having to first download all of the messages from the server:
foreach (var summary in inbox.Fetch (0, -1, MessageSummaryItems.Full, cancel.Token)) {
Console.WriteLine ("[summary] {0:D2}: {1}", summary.Index, summary.Envelope.Subject);
}You may also be interested in searching...
var query = SearchQuery.DeliveredAfter (DateTime.Parse ("2013-01-12"))
.And (SearchQuery.SubjectContains ("MailKit")).And (SearchQuery.Seen);
foreach (var uid in inbox.Search (query, cancel.Token)) {
var message = inbox.GetMessage (uid, cancel.Token);
Console.WriteLine ("[match] {0}: {1}", uid, message.Subject);
}Of course, instead of downloading the message, you could also fetch the summary information for the matching messages or do any of a number of other things with the UIDs that are returned.
How about navigating folders? MailKit can do that, too:
// Get the first personal namespace and list the toplevel folders under it.
var personal = client.GetFolder (client.PersonalNamespaces[0]);
foreach (var folder in personal.GetSubfolders (false, cancel.Token))
Console.WriteLine ("[folder] {0}", folder.Name);If the IMAP server supports the SPECIAL-USE or the XLIST (GMail) extension, you can get ahold of the pre-defined All, Drafts, Flagged (aka Important), Junk, Sent, Trash, etc folders like this:
if ((client.Capabilities & (ImapCapabilities.SpecialUse | ImapCapabilities.XList)) != 0) {
var drafts = client.GetFolder (SpecialFolder.Drafts);
} else {
// maybe check the user's preferences for the Drafts folder?
}The first thing you'll need to do is fork MailKit to your own GitHub repository. Once you do that,
git clone git@github.com/<your-account>/MailKit.git
If you use Xamarin Studio or MonoDevelop, all of the solution files are configured with the coding style used by MailKit. If you use Visual Studio or some other editor, please try to maintain the existing coding style as best as you can.
Once you've got some changes that you'd like to submit upstream to the official MailKit repository, simply send me a Pull Request and I will try to review your changes in a timely manner.
Have a bug or a feature request? Please open a new issue.
Before opening a new issue, please search for existing issues to avoid submitting duplicates.
API documentation can be found at http://jstedfast.github.io/MailKit/docs.