Clock commands management HLD

doc/Clock commands/clock_managment_hld.md

@@ -0,0 +1,219 @@
+# Clock Managment Design #
+
+## Table of Content 
+
+
+* 1. [Table of Content](#TableofContent)
+	* 1.1. [Revision](#Revision)
+	* 1.2. [Scope](#Scope)
+	* 1.3. [Definitions/Abbreviations](#DefinitionsAbbreviations)
+	* 1.4. [Overview](#Overview)
+	* 1.5. [Requirements](#Requirements)
+		* 1.5.1. [Functional requirements](#FunctionalRequirements)
+		* 1.5.2. [Configuration and Management Requirements](#ConfigurationManagementRequirements) 
+* 2. [Design](#Design)
+	* 2.1. [High-Level Design](#High-LevelDesign)
+* 3. [Configuration and management](#Configurationandmanagement)
+	* 3.1. [ConfigDB Tables](#ConfigDBTables)
+	* 3.2. [CLI/YANG model](#CLIYANGmodel)
+		* 3.2.1. [Yang model](#Yangmodel)
+		* 3.2.2. [CLI](#Climodel)
+* 4. [Test Plan](#TestPlan)
+		* 4.1. [Unit Test cases](#UnitTestcases)
+
+
+### 1.1 <a name='Revision'></a>Revision
+
+|  Rev  |  Date   |      Author      | Change Description |
+| :---: | :-----: | :--------------: | :----------------: |
+|  0.1  | 01/2023 |   Meir Renford   | High level Design  |
+
+###  1.2. <a name='Scope'></a>Scope
+
+This document will address the high level design for clock commands:
+1.	Set/show date-time command
+2.	Set/show timezone command
+
+
+### 1.3 <a name='DefinitionsAbbreviations'></a>Definitions/Abbreviations 
+
+N/A
+
+### 1.4 Overview 
+
+The clock commands allow to set and review the current time parameters of the system - including: time, date and timezone. 
+
+### 1.5 Requirements
+####  1.5.1. <a name='FunctionalRequirements'></a>Functional requirements
+
+1. Any time/date configuration will change accordingly the system time. 
+
+####  1.5.2. <a name='ConfigurationManagementRequirements'></a>Configuration and Management Requirements
+The requirements from the module are: 
+1.	Set and show the system time and date.
+2.	Set and show the system timezone.
+
+
+##  2 <a name='Design'></a>Design
+
+###  2.1 <a name='High-LevelDesign'></a>High-Level Design
+
+The design of this feature is based on Linux command of <b>timedatectl</b>.<BR>
+(man page for timedatectl: https://man7.org/linux/man-pages/man1/timedatectl.1.html)
+
+All set operations are based on this command, executing directly in linux upon user CLI execution.
+The time/date/timezone are configured directly to Linux, and is persistent upon any reboot.
+
+System state of time/date/timezone will appear in 1 line as an output of existing "show clock" command.
+
+hostcfgd will be the daemon in charge of this configuration management.
+
+<u>CLI Commands desin:</u><br>
+
+	Set operations will be divided into 2 different commands:
+
+	1. config clock set-timezone <timezone> (to set timezone command)
+		* will get single input as a string, and validate it is valid as part of ("timedatectl list-timezones" command).
+		Validation will be done either by YANG model, or (if not possible) by issueing relevant error to log.
+		* Value will be stored in db for future upgrade operations.
+		Value is persistent upon reboot.
+		* Linux timedatectl with set-timezone flag will be called.
+		e.g. timedatectl set-timezone "Asia/Kolkata"
+		* <b>In case NTP is enabled -> timezone configuration is allowed and overrides the current time.</b>
+		* Date & timezone setting will be reflected of all the services/dockers in the system.
+
+
+	2. config clock set-date "<YYYY-MM-DD HH:MM:SS>" (to set time and date)
+		* Command will recieve single string with date-time format "<YYYY-MM-DD HH:MM:SS>"
+		* It will be possible to call command with the following options:
+			1.	Only with a date <YYYY-MM-DD>
+			2. 	Only with time <HH:MM:SS>
+			3.  both date and time "<YYYY-MM-DD HH:MM:SS>"
+		* Command does not need to be stored in DB.
+		* Linux timedatectl with set-time flag will be called.
+		e.g. timedatectl set-time "2012-10-30 18:17:16"
+		* <b>In case NTP is enabled -> time/date set is NOT allowed and being blocked</b>
+
+	Additional show command will be added to display all valid timezones:
+
+	3. show clock-timezones
+
+		* Will display list of all valid timezones to be configured.
+		* based on "timedatectl list-timezones" linux command.
+
+
+<u>General notes:</u><br>
+
+	* Both set commands will be written directly to Linux (via imedatectl command), and will be activated immediately.
+
+	* In case of any set command (time/date/timezone) a relevant message will be print to syslog.
+
+	* In case of any set command (time/date/timezone) - rsyslog service should be restarted to reflect the time change.
+
+	* Upgrades - timezone configuration is part of DEVICE_METADATA, hence - configuration upgrade will be taken care of as any other sonic configuration.
+
+
+##  3 <a name='Configurationandmanagement'></a>Configuration and management
+
+###  3.1 <a name='ConfigDBTables'></a>ConfigDB Tables
+
+Only timezone configuration will be saved.
+Additional field will be added to DEVICE_METADATA table
+
+```
+DEVICE_METADATA :{
+    "timezone": {{string}}
+}
+```
+
+default value: "Etc/UTC"
+
+
+###  3.2 <a name='CLIYANGmodel'></a>CLI/YANG model
+
+####  3.2.1. <a name='Yangmodel'></a>Yang model
+
+
+Adding to existing Yang model of device_metadata (https://github.com/sonic-net/sonic-buildimage/blob/master/src/sonic-yang-models/yang-models/sonic-device_metadata.yang)
+
+```
+    container sonic-device_metadata {
+
+        container DEVICE_METADATA {
+
+            description "DEVICE_METADATA part of config_db.json";
+
+            container localhost{
+			...
+				leaf timezone {
+					type string;
+					description "System time-zone setting";
+				}
+```
+
+####  3.2.2. <a name='Climodel'></a>CLI
+
+##### Show CLI
+
+```
+root@host:~$ show clock 
+Sun 15 Jan 2023 06:12:08 PM IST
+
+```
+
+```
+root@host:~$ show clock-timezones
+Africa/Abidjan
+Africa/Accra
+Africa/Addis_Ababa
+Africa/Algiers
+Africa/Asmara
+...
+
+```
+
+##### Config CLI
+
+```
+root@host:~$ config clock set-timezone "<timezone>"
+
+```
+
+```
+root@host:~$ config clock set-date "<YYYY-MM-DD HH:MM:SS>"
+
+```
+
+
+##  4 <a name='TestPlan'></a>Test Plan
+
+###  4.1 <a name='UnitTestcases'></a>Unit Test cases
+
+1. Good flows:<br>
+	a. set timezone<br>
+	b. set date<br>
+	c. set time<br>
+	d. set date & time<br>
+	e. check reboot / upgrade<br>
+	f. check docker restart<br>
+	g. config load / reload <> <br>
+	h. reboot without config save<br>
+	i. upgrade with manually timedatectl before upgrade<br>
+
+
+2. Bad flows:<br>
+	a. set invalid timezone<br>
+	b. set empty string<br>
+	c. set invalid date format<br>
+	d. set invalid time format<br>
+	e. set invalide date/time format<br>
+
+3. NTP interop<br>
+	a. Change time/date, followed by changing NTP - and see time changed.<br>
+	b. try to change time/date in case NTP is enabled -> and expect getting a failure.<br>
+	c. Change timezone in case NTP is enabled, and expect to succeed and change relevant time.<br>
+
+4. Rsyslog:<br>
+	a. In case of any set command (time/date/timezone) - verify rsyslog service should be restarted to reflect the time change.
+
+* Functional tests covering flows above will be part of sonic-mgmt tests suite.