Update command reference

doc/Command-Reference.md

@@ -3063,6 +3063,7 @@ Subsequent pages explain each of these commands in detail.
     -?, -h, --help  Show this message and exit.
 
   Commands:
+  autoneg      Show interface autoneg information
   breakout     Show Breakout Mode information by interfaces
   counters     Show interface counters
   description  Show interface status, protocol and...
@@ -3073,6 +3074,30 @@ Subsequent pages explain each of these commands in detail.
   transceiver  Show SFP Transceiver information
   ```
 
+**show interfaces autoneg**
+
+This show command displays the port auto negotiation status for all interfaces i.e. interface name, auto negotiation mode, speed, advertised speeds, interface type, advertised interface types, operational status, admin status. For a single interface, provide the interface name with the sub-command.
+
+- Usage:
+  ```
+  show interfaces autoneg status
+  show interfaces autoneg status <interface_name>
+  ```
+
+- Example:
+  ```
+  admin@sonic:~$ show interfaces autoneg status
+    Interface    Auto-Neg Mode    Speed    Adv Speeds    Type    Adv Types    Oper    Admin
+  -----------  ---------------  -------  ------------  ------  -----------  ------  -------
+    Ethernet0          enabled      25G       10G,25G      CR       CR,CR4      up       up
+    Ethernet4         disabled     100G           all     CR4          all      up       up
+
+  admin@sonic:~$ show interfaces autoneg status Ethernet8
+    Interface    Auto-Neg Mode    Speed    Adv Speeds    Type    Adv Types    Oper    Admin
+  -----------  ---------------  -------  ------------  ------  -----------  ------  -------
+    Ethernet8         disabled     100G           N/A     CR4          N/A      up       up
+  ```
+
 **show interfaces breakout**
 
 This show command displays the port capability for all interfaces i.e. index, lanes, default_brkout_mode, breakout_modes(i.e. all the available breakout modes) and brkout_mode (i.e. current breakout mode). To display current breakout mode, "current-mode" subcommand can be used.For a single interface, provide the interface name with the sub-command.
@@ -3379,6 +3404,10 @@ This sub-section explains the following list of configuration on the interfaces.
 4) speed - to set the interface speed
 5) startup - to bring up the administratively shutdown interface
 6) breakout - to set interface breakout mode
+7) autoneg - to set interface auto negotiation mode
+8) advertised-speeds - to set interface advertised speeds
+9) advertised-types - to set interface advertised types
+10) type - to set interface type
 
 From 201904 release onwards, the “config interface” command syntax is changed and the format is as follows:
 
@@ -3713,6 +3742,104 @@ kindly use, double tab i.e. <tab><tab> to see the available breakout option cust
 
 Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)
 
+**config interface autoneg <interface_name> (Versions >= 202106)**
+
+This command is used to set port auto negotiation mode.
+
+- Usage:
+  ```
+  sudo config interface autoneg --help
+  Usage: config interface autoneg [OPTIONS] <interface_name> <mode>
+
+    Set interface auto negotiation mode
+
+  Options:
+    -v, --verbose   Enable verbose output
+    -h, -?, --help  Show this message and exit.
+  ```
+
+- Example:
+  ```
+  admin@sonic:~$ sudo config interface autoneg Ethernet0 enabled
+
+  admin@sonic:~$ sudo config interface autoneg Ethernet0 disabled
+  ```
+
+Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)
+
+**config interface advertised-speeds <interface_name> (Versions >= 202106)**
+
+This command is used to set port advertised speed.
+
+- Usage:
+  ```
+  sudo config interface advertised-speeds --help
+  Usage: config interface advertised-speeds [OPTIONS] <interface_name> <speed_list>
+
+    Set interface advertised speeds
+
+  Options:
+    -v, --verbose   Enable verbose output
+    -h, -?, --help  Show this message and exit.
+  ```
+
+- Example:
+  ```
+  admin@sonic:~$ sudo config interface advertised-speeds Ethernet0 all
+
+  admin@sonic:~$ sudo config interface advertised-speeds Ethernet0 50000,100000
+  ```
+
+Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)
+
+**config interface advertised-types <interface_name> (Versions >= 202106)**
+
+This command is used to set port advertised interface types.
+
+- Usage:
+  ```
+  sudo config interface advertised-types --help
+  Usage: config interface advertised-types [OPTIONS] <interface_name> <interface_type_list>
+
+    Set interface advertised types
+
+  Options:
+    -v, --verbose   Enable verbose output
+    -h, -?, --help  Show this message and exit.
+  ```
+
+- Example:
+  ```
+  admin@sonic:~$ sudo config interface advertised-types Ethernet0 all
+
+  admin@sonic:~$ sudo config interface advertised-types Ethernet0 CR,CR4
+  ```
+
+Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)
+
+**config interface type <interface_name> (Versions >= 202106)**
+
+This command is used to set port interface type.
+
+- Usage:
+  ```
+  sudo config interface type --help
+  Usage: config interface type [OPTIONS] <interface_name> <interface_type_value>
+
+    Set interface type
+
+  Options:
+    -v, --verbose   Enable verbose output
+    -h, -?, --help  Show this message and exit.
+  ```
+
+- Example:
+  ```
+  admin@sonic:~$ sudo config interface type Ethernet0 CR4
+  ```
+
+Go Back To [Beginning of the document](#) or [Beginning of this section](#interfaces)
+
 **config interface cable_length (Versions >= 202006)**
 
 This command is used to configure the length of the cable connected to a port. The cable_length is in unit of meters and must be suffixed with "m".