[sonic-installer] Hyphens instead of underscores in command and subcommands

data/etc/bash_completion.d/sonic-installer

@@ -0,0 +1,8 @@
+_sonic_installer_completion() {
+    COMPREPLY=( $( env COMP_WORDS="${COMP_WORDS[*]}" \
+                   COMP_CWORD=$COMP_CWORD \
+                   _SONIC_INSTALLER_COMPLETE=complete $1 ) )
+    return 0
+}
+
+complete -F _sonic_installer_completion -o default sonic-installer;

doc/Command-Reference.md

@@ -4645,7 +4645,7 @@ Supported options:
 2. -f|--force - install FW regardless the current version
 3. -i|--image - update FW using current/next SONiC image
 
-Note: the default option is --image=current (current/next values are taken from `sonic_installer list`)
+Note: the default option is --image=current (current/next values are taken from `sonic-installer list`)
 
 ### Platform Component Firmware vendor specific behaviour
 
@@ -6604,26 +6604,26 @@ Go Back To [Beginning of the document](#) or [Beginning of this section](#waterm
 
 ## Software Installation and Management
 
-SONiC software can be installed in two methods, viz, "using sonic_installer tool", "ONIE Installer".
+SONiC software can be installed in two methods, viz, "using sonic-installer tool", "ONIE Installer".
 
 
 ### SONiC Installer
 This is a command line tool available as part of the SONiC software; If the device is already running the SONiC software, this tool can be used to install an alternate image in the partition.
 This tool has facility to install an alternate image, list the available images and to set the next reboot image.
 This command requires elevated (root) privileges to run.
 
-**sonic_installer list**
+**sonic-installer list**
 
 This command displays information about currently installed images. It displays a list of installed images, currently running image and image set to be loaded in next reboot.
 
 - Usage:
   ```
-  sonic_installer list
+  sonic-installer list
   ```
 
 - Example:
    ```
-  admin@sonic:~$ sudo sonic_installer list
+  admin@sonic:~$ sudo sonic-installer list
   Current: SONiC-OS-HEAD.XXXX
   Next: SONiC-OS-HEAD.XXXX
   Available:
@@ -6633,18 +6633,18 @@ This command displays information about currently installed images. It displays
 
 TIP: This output can be obtained without evelated privileges by running the `show boot` command. See [here](#show-system-status) for details.
 
-**sonic_installer install**
+**sonic-installer install**
 
 This command is used to install a new image on the alternate image partition.  This command takes a path to an installable SONiC image or URL and installs the image.
 
 - Usage:
   ```
-  sonic_installer install <image_file_path>
+  sonic-installer install <image_file_path>
   ```
 
 - Example:
   ```
-  admin@sonic:~$ sudo sonic_installer install https://sonic-jenkins.westus.cloudapp.azure.com/job/xxxx/job/buildimage-xxxx-all/xxx/artifact/target/sonic-xxxx.bin
+  admin@sonic:~$ sudo sonic-installer install https://sonic-jenkins.westus.cloudapp.azure.com/job/xxxx/job/buildimage-xxxx-all/xxx/artifact/target/sonic-xxxx.bin
   New image will be installed, continue? [y/N]: y
   Downloading image...
   ...100%, 480 MB, 3357 KB/s, 146 seconds passed
@@ -6676,46 +6676,46 @@ This command is used to install a new image on the alternate image partition.  T
   Done
   ```
 
-**sonic_installer set_default**
+**sonic-installer set_default**
 
 This command is be used to change the image which can be loaded by default in all the subsequent reboots.
 
 - Usage:
   ```
-  sonic_installer set_default <image_name>
+  sonic-installer set_default <image_name>
   ```
 
 - Example:
   ```
-  admin@sonic:~$ sudo sonic_installer set_default SONiC-OS-HEAD.XXXX
+  admin@sonic:~$ sudo sonic-installer set_default SONiC-OS-HEAD.XXXX
   ```
 
-**sonic_installer set_next_boot**
+**sonic-installer set_next_boot**
 
 This command is used to change the image that can be loaded in the *next* reboot only. Note that it will fallback to current image in all other subsequent reboots after the next reboot.
 
 - Usage:
   ```
-  sonic_installer set_next_boot <image_name>
+  sonic-installer set_next_boot <image_name>
   ```
 
 - Example:
   ```
-  admin@sonic:~$ sudo sonic_installer set_next_boot SONiC-OS-HEAD.XXXX
+  admin@sonic:~$ sudo sonic-installer set_next_boot SONiC-OS-HEAD.XXXX
   ```
 
-**sonic_installer remove**
+**sonic-installer remove**
 
 This command is used to remove the unused SONiC image from the disk. Note that it's *not* allowed to remove currently running image.
 
 - Usage:
   ```
-  sonic_installer remove [-y|--yes] <image_name>
+  sonic-installer remove [-y|--yes] <image_name>
   ```
 
 - Example:
   ```
-  admin@sonic:~$ sudo sonic_installer remove SONiC-OS-HEAD.YYYY
+  admin@sonic:~$ sudo sonic-installer remove SONiC-OS-HEAD.YYYY
   Image will be removed, continue? [y/N]: y
   Updating GRUB...
   Done
@@ -6726,18 +6726,18 @@ This command is used to remove the unused SONiC image from the disk. Note that i
   Image removed
   ```
 
-**sonic_installer cleanup**
+**sonic-installer cleanup**
 
 This command removes all unused images from the device, leaving only the currently active image and the image which will be booted into next (if different) installed. If there are no images which can be removed, the command will output `No image(s) to remove`
 
 - Usage:
   ```
-  sonic_installer cleanup [-y|--yes]
+  sonic-installer cleanup [-y|--yes]
   ```
 
 - Example:
   ```
-  admin@sonic:~$ sudo sonic_installer cleanup
+  admin@sonic:~$ sudo sonic-installer cleanup
   Remove images which are not current and next, continue? [y/N]: y
   No image(s) to remove
   ```

fwutil/lib.py

@@ -221,13 +221,13 @@ def __init__(self):
         self.overlay_mountpoint = self.OVERLAY_MOUNTPOINT_TEMPLATE.format(image_stem)
 
     def get_current_image(self):
-        cmd = "sonic_installer list | grep 'Current: ' | cut -f2 -d' '"
+        cmd = "sonic-installer list | grep 'Current: ' | cut -f2 -d' '"
         output = subprocess.check_output(cmd, stderr=subprocess.STDOUT, shell=True)
 
         return output.rstrip(NEWLINE)
 
     def get_next_image(self):
-        cmd = "sonic_installer list | grep 'Next: ' | cut -f2 -d' '"
+        cmd = "sonic-installer list | grep 'Next: ' | cut -f2 -d' '"
         output = subprocess.check_output(cmd, stderr=subprocess.STDOUT, shell=True)
 
         return output.rstrip(NEWLINE)

scripts/asic_config_check

@@ -73,8 +73,8 @@ function ConfirmASICConfigChecksumsMatch()
 # Main starts here
 debug "Checking that ASIC configuration has not changed"
 
-CURR_SONIC_IMAGE="$(sonic_installer list | grep "Current: " | cut -f2 -d' ')"
-DST_SONIC_IMAGE="$(sonic_installer list | grep "Next: " | cut -f2 -d' ')"
+CURR_SONIC_IMAGE="$(sonic-installer list | grep "Current: " | cut -f2 -d' ')"
+DST_SONIC_IMAGE="$(sonic-installer list | grep "Next: " | cut -f2 -d' ')"
 if [[ "${CURR_SONIC_IMAGE}" == "${DST_SONIC_IMAGE}" ]]; then
     debug "ASIC config unchanged, current and destination SONiC version are the same"
     exit "${ASIC_CONFIG_UNCHANGED}"

scripts/fast-reboot

@@ -273,7 +273,7 @@ function teardown_control_plane_assistant()
 function setup_reboot_variables()
 {
     # Kernel and initrd image
-    NEXT_SONIC_IMAGE=$(sonic_installer list | grep "Next: " | cut -d ' ' -f 2)
+    NEXT_SONIC_IMAGE=$(sonic-installer list | grep "Next: " | cut -d ' ' -f 2)
     IMAGE_PATH="/host/image-${NEXT_SONIC_IMAGE#SONiC-OS-}"
     if grep -q aboot_platform= /host/machine.conf; then
         KERNEL_IMAGE="$(ls $IMAGE_PATH/boot/vmlinuz-*)"

scripts/reboot

@@ -63,7 +63,7 @@ function show_help_and_exit()
 
 function setup_reboot_variables()
 {
-    NEXT_SONIC_IMAGE=$(sonic_installer list | grep "Next: " | cut -d ' ' -f 2)
+    NEXT_SONIC_IMAGE=$(sonic-installer list | grep "Next: " | cut -d ' ' -f 2)
     IMAGE_PATH="/host/image-${NEXT_SONIC_IMAGE#SONiC-OS-}"
 }
 

scripts/sonic-kdump-config

@@ -77,15 +77,15 @@ def run_command(cmd, use_shell=False):
 
 ## Search which SONiC image is the Current image
 def get_current_image():
-    (rc, img, err_str) = run_command("sonic_installer list | grep 'Current: ' | cut -d '-' -f 3-", use_shell=True);
+    (rc, img, err_str) = run_command("sonic-installer list | grep 'Current: ' | cut -d '-' -f 3-", use_shell=True);
     if type(img) == list and len(img) == 1:
         return img[0]
     print_err("Unable to locate current SONiC image")
     sys.exit(1)
 
 ## Search which SONiC image is the Next image
 def get_next_image():
-    (rc, img, err_str) = run_command("sonic_installer list | grep 'Next: ' | cut -d '-' -f 3-", use_shell=True);
+    (rc, img, err_str) = run_command("sonic-installer list | grep 'Next: ' | cut -d '-' -f 3-", use_shell=True);
     if type(img) == list and len(img) == 1:
         return img[0]
     print_err("Unable to locate current SONiC image")

setup.py

@@ -135,7 +135,8 @@
             'pddf_ledutil = pddf_ledutil.main:cli',
             'show = show.main:cli',
             'sonic-clear = clear.main:cli',
-            'sonic_installer = sonic_installer.main:cli',
+            'sonic-installer = sonic_installer.main:sonic_installer',
+            'sonic_installer = sonic_installer.main:sonic_installer',  # Deprecated
             'undebug = undebug.main:cli',
             'watchdogutil = watchdogutil.main:watchdogutil',
         ]

show/main.py

@@ -2722,7 +2722,7 @@ def ecn():
 @cli.command('boot')
 def boot():
     """Show boot configuration"""
-    cmd = "sudo sonic_installer list"
+    cmd = "sudo sonic-installer list"
     proc = subprocess.Popen(cmd, stdout=subprocess.PIPE, shell=True)
     click.echo(proc.stdout.read())
 

sonic_installer/aliases.ini

@@ -0,0 +1,6 @@
+[aliases]
+set_default=set-default
+set_next_boot=set-next-boot
+binary_version=binary-version
+upgrade_docker=upgrade-docker
+rollback_docker=rollback-docker

sonic_installer/common.py

@@ -1,5 +1,5 @@
 """
-Module holding common functions and constants used by sonic_installer and its
+Module holding common functions and constants used by sonic-installer and its
 subpackages.
 """