Skip to content

Ardu-Stim V1.0.0
Compare
Choose a tag to compare
@noisymime noisymime released this 06 May 11:46
· 19 commits to master since this release
1.0.0
ba9c902

After many years of being only for developers, Ardu-Stim is finally getting a v1.0.0 release! 🎉
It's hard to know where to begin in describing this release as there has been a HUGE number of changes made since the Alpha was released a few years ago.

The firmware for the board itself has matured and been cleaned up significantly. It's now in a very good position for new features to be added and there has been a large amount of resources freed up for Nano boards. Useful features such as varying speed on the ranged RPM sweep and low RPM compression waves demonstrate the flexibility of the system now.

The GUI, whilst far from perfect still, is now reasonably tidy on Windows, Mac and linux. The firmware upload has now been fixed on all platforms also, making it easier to get up and running.

Major Features 🏎️

  • 3 RPM Modes:
    • Potentiometer
    • Fixed RPM
    • Ranged sweep (With variable range and speed)
  • Compression 'waves' at low RPM
  • Built-in uploading of firmware to board

Bug Fixes 🐞

Too many to mention!

Wheel Patterns ⚙️

  • 4 cylinder dizzy
  • 6 cylinder dizzy
  • 8 cylinder dizzy
  • 60-2 crank only
  • 60-2 crank and cam
  • 60-2 crank and 'half moon' cam
  • 36-1 crank only
  • 24-1 crank only
  • 4-1 crank wheel with cam
  • 8-1 crank only (R6)
  • 6-1 crank with cam
  • 12-1 crank with cam
  • 40-1 crank only (Ford V10)
  • Distributor style 4 cyl 50deg off, 40 deg on
  • Odd fire 90 deg pattern 0 and 135 pulses
  • GM OptiSpark LT1 360 and 8
  • 12-3 oddball
  • 36-2-2-2 H4 Crank only
  • 36-2-2-2 H6 Crank only
  • 36-2-2-2 Crank and cam
  • GM 4200 crank wheel
  • Mazda FE3 36-1 with cam
  • Mitsubishi 6g72 with cam
  • Buell Oddfire CAM wheel
  • GM LS1 crank and cam
  • GM 58x crank and 4x cam
  • Odd Lotus 36-1-1-1-1 flywheel
  • Honda RC51 with cam
  • 36-1 crank with 2nd trigger on teeth 33-34
  • Chrysler NGC 36+2-2 crank, NGC 4-cyl cam
  • Chrysler NGC 36-2+2 crank, NGC 6-cyl cam
  • Chrysler NGC 36-2+2 crank, NGC 8-cyl cam
  • Weber-Marelli 8 crank+2 cam pattern
  • Fiat 1.8 16V crank and cam
  • Nissan 360 CAS with 6 slots
  • Mazda CAS 24-2 with single pulse outer ring
  • Yamaha 2002-03 R1 8 even-tooth crank with 1 tooth cam
  • GM 4 even-tooth crank with 1 tooth cam
  • GM 6 even-tooth crank with 1 tooth cam
  • GM 8 even-tooth crank with 1 tooth cam
  • Volvo d12[acd] crank with 7 tooth cam
  • Mazda 36-2-2-2 with 6 tooth cam
  • Mitsubishi 4g63 aka 4/2 crank and cam
  • Audi 135 tooth crank and cam
  • Honda D17 Crank (12+1)
  • Mazda 323 AU version
  • Daihatsu 3+1 distributor (3 cylinders)
  • Miata 99-05
  • 12/1 (12 crank with cam)
  • 24/1 (24 crank with cam)
  • Subaru 6/7 crank and cam
  • GM 7X
  • DSM 420a
  • Ford ST170
  • Mitsubishi 3A92
  • Toyota 4AGE
  • Toyota 4AGZE
  • Suzuki DRZ400
  • Jeep 2000
  • BMW N20
  • Dodge Viper V10 1996-2002
Assets 5
Loading