XCKnife is a tool that partitions XCTestCase tests in a way that minimizes total execution time (particularly useful for distributed test executions).
It works by leveraging xctool's json-stream reporter output.
XCKnife generates a list of only arguments meant to be pass to Xctool's -only test arguments, but alternatively could used to generate multiple xcschemes with the proper test partitions.
More information on XCKnife, go here.
$ gem install xcknife
$ xcknife --help
Usage: xcknife [options] worker-count historical-timings-json-stream-file [current-tests-json-stream-file]
-p, --partition TARGETS Comma separated list of targets. Can be used multiple times.
-o, --output FILENAME Output file. Defaults to STDOUT
-a, --abbrev Results are abbreviated
-x, --xcodebuild-output Output is formatted for xcodebuild
-h, --help Show this message
The data provided on the example folder:
$ xcknife -p iPhoneTestTarget 3 example/xcknife-exemplar-historical-data.json-stream example/xcknife-exemplar.json-stream
This will balance the tests onthe iPhoneTestTarget into 3 machines. The output is:
{
"metadata": {
"worker_count": 3,
"partition_set_count": 1,
"total_time_in_ms": 910,
"historical_total_tests": 5,
"current_total_tests": 5,
"class_extrapolations": 0,
"target_extrapolations": 0
},
"partition_set_data": [
{
"partition_set": "iPhoneTestTarget",
"size": 3,
"imbalance_ratio": 1.0,
"partitions": [
{
"shard_number": 1,
"cli_arguments": [ "-only", "iPhoneTestTarget:iPhoneTestClassGama" ],
"partition_imbalance_ratio": 0.9923076923076923
},
{
"shard_number": 2,
"cli_arguments": [ "-only", "iPhoneTestTarget:iPhoneTestClassAlpha,iPhoneTestClassDelta" ],
"partition_imbalance_ratio": 1.0054945054945055
},
{
"shard_number": 3,
"cli_arguments": [ "-only", "iPhoneTestTarget:iPhoneTestClassBeta,iPhoneTestClassOmega" ],
"partition_imbalance_ratio": 1.0021978021978022
}]}]}This provides a lot of data about the partitions and their imbalances (both internal to the partition sets, and amongst them).
If you only want the -only arguments, run with the -a flag:
$ xcknife -p iPhoneTestTarget 3 example/xcknife-exemplar-historical-data.json-stream example/xcknife-exemplar.json-stream -a
outputing:
[
[
[
"-only",
"iPhoneTestTarget:iPhoneTestClassGama"
],
[
"-only",
"iPhoneTestTarget:iPhoneTestClassAlpha,iPhoneTestClassDelta"
],
[
"-only",
"iPhoneTestTarget:iPhoneTestClassBeta,iPhoneTestClassOmega"
]
]
]You can pass the partition flag mutliple times, so that XCKnife will do two level partitioning: inside each partition, and then for all partitions.
This is useful if each partition is tested against multiple devices, simulator versions or configurations. On the following example picture CommonTestTarget being tested against iPhones only, while CommonTestTarget,iPadTestTarget is tested against iPads.
$ xcknife -p CommonTestTarget -p CommonTestTarget,iPadTestTarget 6 example/xcknife-exemplar-historical-data.json-stream example/xcknife-exemplar.json-stream
This will balance two partition sets: CommonTestTarget and CommonTestTarget,iPadTestTarget into 6 machines. The output is:
{
"metadata": {
"worker_count": 6,
"partition_set_count": 2,
"total_time_in_ms": 8733,
"historical_total_tests": 6,
"current_total_tests": 7,
"class_extrapolations": 1,
"target_extrapolations": 0
},
"partition_set_data": [
{
"partition_set": "CommonTestTarget",
"size": 1,
"imbalance_ratio": 0.5480554313813143,
"partitions": [
{
"shard_number": 1,
"cli_arguments": [
"-only",
"CommonTestTarget:CommonTestClass"
],
"partition_imbalance_ratio": 1.0
}
]
},
{
"partition_set": "CommonTestTarget,iPadTestTarget",
"size": 5,
"imbalance_ratio": 1.4519445686186858,
"partitions": [
{
"shard_number": 2,
"cli_arguments": [
"-only",
"iPadTestTarget:iPadTestClassTwo"
],
"partition_imbalance_ratio": 3.0800492610837438
},
{
"shard_number": 3,
"cli_arguments": [
"-only",
"iPadTestTarget:iPadTestClassOne"
],
"partition_imbalance_ratio": 0.6169950738916257
},
{
"shard_number": 4,
"cli_arguments": [
"-only",
"iPadTestTarget:iPadTestClassFour"
],
"partition_imbalance_ratio": 0.6169950738916257
},
{
"shard_number": 5,
"cli_arguments": [
"-only",
"CommonTestTarget:CommonTestClass"
],
"partition_imbalance_ratio": 0.3774630541871921
},
{
"shard_number": 6,
"cli_arguments": [
"-only",
"iPadTestTarget:iPadTestClassThree"
],
"partition_imbalance_ratio": 0.30849753694581283
}
]
}
]
}Described here.
XCKnife uses only a few attributes of a json-stream file. If you are storing the files in repository, you may want to remove unecessary data with xcknife-min. For example:
$ xcknife-min example/xcknife-exemplar-historical-data.json-stream minified.json-stream
XCKnife requires the use of the gtimeout command, which is provided in the GNU coreutils brew package. If you don't already have them, they can be installed with the command:
brew install coreutils
Any contributors to the master xcknife repository must sign the Individual Contributor License Agreement (CLA). It's a short form that covers our bases and makes sure you're eligible to contribute.
When you have a change you'd like to see in the master repository, send a pull request. Before we merge your request, we'll make sure you're in the list of people who have signed a CLA.
Copyright 2016 Square Inc.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.