-
Notifications
You must be signed in to change notification settings - Fork 115
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Which branch is the current main branch for VisionFive2? #136
Comments
This prefixed with Or you go with mainline Linux. If I see correctly, HDMI and PCIe (=> NVMe?) support are still missing: https://rvspace.org/en/project/JH7110_Upstream_Plan |
@MichaIng Do you which defconfig settings have to be applied to the mainline (e.g. 6.9) kernel to get the hardware working? I tried a plain one as part of a NixOS build NixOS/nixos-hardware#958, which doesn't boot; no green LED, no HDMI (although from the status this should be expected i think), no ping through ethernet. |
[ Upstream commit 575689f ] xfs log io error will trigger xlog shut down, and end_io worker call xlog_state_shutdown_callbacks to unpin and release the buf log item. The race condition is that when there are some thread doing transaction commit and happened not to be intercepted by xlog_is_shutdown, then, these log item will be insert into CIL, when unpin and release these buf log item, UAF will occur. BTW, add delay before `xlog_cil_commit` can increase recurrence probability. The following call graph actually encountered this bad situation. fsstress io end worker kworker/0:1H-216 xlog_ioend_work ->xlog_force_shutdown ->xlog_state_shutdown_callbacks ->xlog_cil_process_committed ->xlog_cil_committed ->xfs_trans_committed_bulk ->xfs_trans_apply_sb_deltas ->li_ops->iop_unpin(lip, 1); ->xfs_trans_getsb ->_xfs_trans_bjoin ->xfs_buf_item_init ->if (bip) { return 0;} //relog ->xlog_cil_commit ->xlog_cil_insert_items //insert into CIL ->xfs_buf_ioend_fail(bp); ->xfs_buf_ioend ->xfs_buf_item_done ->xfs_buf_item_relse ->xfs_buf_item_free when cil push worker gather percpu cil and insert super block buf log item into ctx->log_items then uaf occurs. ================================================================== BUG: KASAN: use-after-free in xlog_cil_push_work+0x1c8f/0x22f0 Write of size 8 at addr ffff88801800f3f0 by task kworker/u4:4/105 CPU: 0 PID: 105 Comm: kworker/u4:4 Tainted: G W 6.1.0-rc1-00001-g274115149b42 starfive-tech#136 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: xfs-cil/sda xlog_cil_push_work Call Trace: <TASK> dump_stack_lvl+0x4d/0x66 print_report+0x171/0x4a6 kasan_report+0xb3/0x130 xlog_cil_push_work+0x1c8f/0x22f0 process_one_work+0x6f9/0xf70 worker_thread+0x578/0xf30 kthread+0x28c/0x330 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 2145: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x14a/0x510 xfs_buf_item_init+0x160/0x6d0 _xfs_trans_bjoin+0x7f/0x2e0 xfs_trans_getsb+0xb6/0x3f0 xfs_trans_apply_sb_deltas+0x1f/0x8c0 __xfs_trans_commit+0xa25/0xe10 xfs_symlink+0xe23/0x1660 xfs_vn_symlink+0x157/0x280 vfs_symlink+0x491/0x790 do_symlinkat+0x128/0x220 __x64_sys_symlink+0x7a/0x90 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 216: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 __kasan_slab_free+0x105/0x1a0 kmem_cache_free+0xb6/0x460 xfs_buf_ioend+0x1e9/0x11f0 xfs_buf_item_unpin+0x3d6/0x840 xfs_trans_committed_bulk+0x4c2/0x7c0 xlog_cil_committed+0xab6/0xfb0 xlog_cil_process_committed+0x117/0x1e0 xlog_state_shutdown_callbacks+0x208/0x440 xlog_force_shutdown+0x1b3/0x3a0 xlog_ioend_work+0xef/0x1d0 process_one_work+0x6f9/0xf70 worker_thread+0x578/0xf30 kthread+0x28c/0x330 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88801800f388 which belongs to the cache xfs_buf_item of size 272 The buggy address is located 104 bytes inside of 272-byte region [ffff88801800f388, ffff88801800f498) The buggy address belongs to the physical page: page:ffffea0000600380 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88801800f208 pfn:0x1800e head:ffffea0000600380 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 001fffff80010200 ffffea0000699788 ffff88801319db50 ffff88800fb50640 raw: ffff88801800f208 000000000015000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801800f280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801800f300: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88801800f380: fc fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801800f400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801800f480: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint Signed-off-by: Guo Xuenan <guoxuenan@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Which branch is the current main branch for VisionFive2?
The text was updated successfully, but these errors were encountered: