QEMU 6.0.0 - Improve NSIS installer script #7
Comments
|
Thanks for these suggestions. At least some of them should be possible. I'll have to check for the rest. |
|
I already tested and you can do all of these. |
stweil
pushed a commit
that referenced
this issue
Oct 31, 2022
As soon as virtio_scsi_data_plane_start() attaches host notifiers the IOThread may start virtqueue processing. There is a race between IOThread virtqueue processing and virtio_scsi_data_plane_start() because it only assigns s->dataplane_started after attaching host notifiers. When a virtqueue handler function in the IOThread calls virtio_scsi_defer_to_dataplane() it may see !s->dataplane_started and attempt to start dataplane even though we're already in the IOThread: #0 0x00007f67b360857c __pthread_kill_implementation (libc.so.6 + 0xa257c) #1 0x00007f67b35bbd56 raise (libc.so.6 + 0x55d56) #2 0x00007f67b358e833 abort (libc.so.6 + 0x28833) #3 0x00007f67b358e75b __assert_fail_base.cold (libc.so.6 + 0x2875b) #4 0x00007f67b35b4cd6 __assert_fail (libc.so.6 + 0x4ecd6) #5 0x000055ca87fd411b memory_region_transaction_commit (qemu-kvm + 0x67511b) #6 0x000055ca87e17811 virtio_pci_ioeventfd_assign (qemu-kvm + 0x4b8811) #7 0x000055ca87e14836 virtio_bus_set_host_notifier (qemu-kvm + 0x4b5836) #8 0x000055ca87f8e14e virtio_scsi_set_host_notifier (qemu-kvm + 0x62f14e) #9 0x000055ca87f8dd62 virtio_scsi_dataplane_start (qemu-kvm + 0x62ed62) #10 0x000055ca87e14610 virtio_bus_start_ioeventfd (qemu-kvm + 0x4b5610) qemu#11 0x000055ca87f8c29a virtio_scsi_handle_ctrl (qemu-kvm + 0x62d29a) qemu#12 0x000055ca87fa5902 virtio_queue_host_notifier_read (qemu-kvm + 0x646902) qemu#13 0x000055ca882c099e aio_dispatch_handler (qemu-kvm + 0x96199e) qemu#14 0x000055ca882c1761 aio_poll (qemu-kvm + 0x962761) qemu#15 0x000055ca880e1052 iothread_run (qemu-kvm + 0x782052) qemu#16 0x000055ca882c562a qemu_thread_start (qemu-kvm + 0x96662a) This patch assigns s->dataplane_started before attaching host notifiers so that virtqueue handler functions that run in the IOThread before virtio_scsi_data_plane_start() returns correctly identify that dataplane does not need to be started. This fix is taken from the virtio-blk dataplane code and it's worth adding a comment in virtio-blk as well to explain why it works. Note that s->dataplane_started does not need the AioContext lock because it is set before attaching host notifiers and cleared after detaching host notifiers. In other words, the IOThread always sees the value true and the main loop thread does not modify it while the IOThread is active. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2099541 Reported-by: Qing Wang <qinwang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20220808162134.240405-1-stefanha@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
stweil
pushed a commit
that referenced
this issue
Oct 31, 2022
The DMA engine is started by I/O access and then itself accesses the
I/O registers, triggering a reentrancy bug.
The following log can reveal it:
==5637==ERROR: AddressSanitizer: stack-overflow
#0 0x5595435f6078 in tulip_xmit_list_update qemu/hw/net/tulip.c:673
#1 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13
#2 0x559544637f86 in memory_region_write_accessor qemu/softmmu/memory.c:492:5
#3 0x5595446379fa in access_with_adjusted_size qemu/softmmu/memory.c:554:18
#4 0x5595446372fa in memory_region_dispatch_write qemu/softmmu/memory.c
#5 0x55954468b74c in flatview_write_continue qemu/softmmu/physmem.c:2825:23
#6 0x559544683662 in flatview_write qemu/softmmu/physmem.c:2867:12
#7 0x5595446833f3 in address_space_write qemu/softmmu/physmem.c:2963:18
#8 0x5595435fb082 in dma_memory_rw_relaxed qemu/include/sysemu/dma.h:87:12
#9 0x5595435fb082 in dma_memory_rw qemu/include/sysemu/dma.h:130:12
#10 0x5595435fb082 in dma_memory_write qemu/include/sysemu/dma.h:171:12
qemu#11 0x5595435fb082 in stl_le_dma qemu/include/sysemu/dma.h:272:1
qemu#12 0x5595435fb082 in stl_le_pci_dma qemu/include/hw/pci/pci.h:910:1
qemu#13 0x5595435fb082 in tulip_desc_write qemu/hw/net/tulip.c:101:9
qemu#14 0x5595435f7e3d in tulip_xmit_list_update qemu/hw/net/tulip.c:706:9
qemu#15 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13
Fix this bug by restricting the DMA engine to memories regions.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
stweil
pushed a commit
that referenced
this issue
Oct 31, 2022
Setup an ARM virtual machine of machine virt and execute qmp "query-acpi-ospm-status" causes segmentation fault with following dumpstack: #1 0x0000aaaaab64235c in qmp_query_acpi_ospm_status (errp=errp@entry=0xfffffffff030) at ../monitor/qmp-cmds.c:312 #2 0x0000aaaaabfc4e20 in qmp_marshal_query_acpi_ospm_status (args=<optimized out>, ret=0xffffea4ffe90, errp=0xffffea4ffe88) at qapi/qapi-commands-acpi.c:63 #3 0x0000aaaaabff8ba0 in do_qmp_dispatch_bh (opaque=0xffffea4ffe98) at ../qapi/qmp-dispatch.c:128 #4 0x0000aaaaac02e594 in aio_bh_call (bh=0xffffe0004d80) at ../util/async.c:150 #5 aio_bh_poll (ctx=ctx@entry=0xaaaaad0f6040) at ../util/async.c:178 #6 0x0000aaaaac00bd40 in aio_dispatch (ctx=ctx@entry=0xaaaaad0f6040) at ../util/aio-posix.c:421 #7 0x0000aaaaac02e010 in aio_ctx_dispatch (source=0xaaaaad0f6040, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:320 #8 0x0000fffff76f6884 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0 #9 0x0000aaaaac0452d4 in glib_pollfds_poll () at ../util/main-loop.c:297 #10 os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:320 qemu#11 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:596 qemu#12 0x0000aaaaab5c9e50 in qemu_main_loop () at ../softmmu/runstate.c:734 qemu#13 0x0000aaaaab185370 in qemu_main (argc=argc@entry=47, argv=argv@entry=0xfffffffff518, envp=envp@entry=0x0) at ../softmmu/main.c:38 qemu#14 0x0000aaaaab16f99c in main (argc=47, argv=0xfffffffff518) at ../softmmu/main.c:47 Fixes: ebb6207 ("hw/acpi: Add ACPI Generic Event Device Support") Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220816094957.31700-1-zhukeqian1@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
stweil
pushed a commit
that referenced
this issue
Nov 9, 2022
Fix warnings such:
disas/nanomips.c:3251:64: warning: format specifies type 'char *' but the argument has type 'int64' (aka 'long long') [-Wformat]
return img_format("CACHE 0x%" PRIx64 ", %s(%s)", op_value, s_value, rs);
~~ ^~~~~~~
%lld
To avoid crashes such (kernel from commit f375ad6):
$ qemu-system-mipsel -cpu I7200 -d in_asm -kernel generic_nano32r6el_page4k
...
----------------
IN: __bzero
0x805c6084: 20c4 6950 ADDU r13, a0, a2
0x805c6088: 9089 ADDIU a0, 1
Process 70261 stopped
* thread #6, stop reason = EXC_BAD_ACCESS (code=1, address=0xfffffffffffffff0)
frame #0: 0x00000001bfe38864 libsystem_platform.dylib`_platform_strlen + 4
libsystem_platform.dylib`:
-> 0x1bfe38864 <+4>: ldr q0, [x1]
0x1bfe38868 <+8>: adr x3, #-0xc8 ; ___lldb_unnamed_symbol314
0x1bfe3886c <+12>: ldr q2, [x3], #0x10
0x1bfe38870 <+16>: and x2, x0, #0xf
Target 0: (qemu-system-mipsel) stopped.
(lldb) bt
* thread #6, stop reason = EXC_BAD_ACCESS (code=1, address=0xfffffffffffffff0)
* frame #0: 0x00000001bfe38864 libsystem_platform.dylib`_platform_strlen + 4
frame #1: 0x00000001bfce76a0 libsystem_c.dylib`__vfprintf + 4544
frame #2: 0x00000001bfd158b4 libsystem_c.dylib`_vasprintf + 280
frame #3: 0x0000000101c22fb0 libglib-2.0.0.dylib`g_vasprintf + 28
frame #4: 0x0000000101bfb7d8 libglib-2.0.0.dylib`g_strdup_vprintf + 32
frame #5: 0x000000010000fb70 qemu-system-mipsel`img_format(format=<unavailable>) at nanomips.c:103:14 [opt]
frame #6: 0x0000000100018868 qemu-system-mipsel`SB_S9_(instruction=<unavailable>, info=<unavailable>) at nanomips.c:12616:12 [opt]
frame #7: 0x000000010000f90c qemu-system-mipsel`print_insn_nanomips at nanomips.c:589:28 [opt]
Fixes: 4066c15 ("disas/nanomips: Remove IMMEDIATE functions")
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-2-philmd@linaro.org>
|
@bovirus, here is a test version of the installer which tries to fix this issue. |
stweil
pushed a commit
that referenced
this issue
Jan 12, 2023
This is below memleak detected when to quit the qemu-system-x86_64 (with
vhost-scsi-pci).
(qemu) quit
=================================================================
==15568==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f00aec57917 in __interceptor_calloc (/lib64/libasan.so.6+0xb4917)
#1 0x7f00ada0d7b5 in g_malloc0 (/lib64/libglib-2.0.so.0+0x517b5)
#2 0x5648ffd38bac in vhost_scsi_start ../hw/scsi/vhost-scsi.c:92
#3 0x5648ffd38d52 in vhost_scsi_set_status ../hw/scsi/vhost-scsi.c:131
#4 0x5648ffda340e in virtio_set_status ../hw/virtio/virtio.c:2036
#5 0x5648ff8de281 in virtio_ioport_write ../hw/virtio/virtio-pci.c:431
#6 0x5648ff8deb29 in virtio_pci_config_write ../hw/virtio/virtio-pci.c:576
#7 0x5648ffe5c0c2 in memory_region_write_accessor ../softmmu/memory.c:493
#8 0x5648ffe5c424 in access_with_adjusted_size ../softmmu/memory.c:555
#9 0x5648ffe6428f in memory_region_dispatch_write ../softmmu/memory.c:1515
#10 0x5648ffe8613d in flatview_write_continue ../softmmu/physmem.c:2825
qemu#11 0x5648ffe86490 in flatview_write ../softmmu/physmem.c:2867
qemu#12 0x5648ffe86d9f in address_space_write ../softmmu/physmem.c:2963
qemu#13 0x5648ffe86e57 in address_space_rw ../softmmu/physmem.c:2973
qemu#14 0x5648fffbfb3d in kvm_handle_io ../accel/kvm/kvm-all.c:2639
qemu#15 0x5648fffc0e0d in kvm_cpu_exec ../accel/kvm/kvm-all.c:2890
qemu#16 0x5648fffc90a7 in kvm_vcpu_thread_fn ../accel/kvm/kvm-accel-ops.c:51
qemu#17 0x56490042400a in qemu_thread_start ../util/qemu-thread-posix.c:505
qemu#18 0x7f00ac3b6ea4 in start_thread (/lib64/libpthread.so.0+0x7ea4)
Free the vsc->inflight at the 'stop' path.
Fixes: b82526c ("vhost-scsi: support inflight io track")
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Li Feng <fengli@smartx.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20230104160433.21353-1-dongli.zhang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
stweil
pushed a commit
that referenced
this issue
Feb 24, 2024
…ock_status Using fleecing backup like in [0] on a qcow2 image (with metadata preallocation) can lead to the following assertion failure: > bdrv_co_do_block_status: Assertion `!(ret & BDRV_BLOCK_ZERO)' failed. In the reproducer [0], it happens because the BDRV_BLOCK_RECURSE flag will be set by the qcow2 driver, so the caller will recursively check the file child. Then the BDRV_BLOCK_ZERO set too. Later up the call chain, in bdrv_co_do_block_status() for the snapshot-access driver, the assertion failure will happen, because both flags are set. To fix it, clear the recurse flag after the recursive check was done. In detail: > #0 qcow2_co_block_status Returns 0x45 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID. > #1 bdrv_co_do_block_status Because of the data flag, bdrv_co_do_block_status() will now also set BDRV_BLOCK_ALLOCATED. Because of the recurse flag, bdrv_co_do_block_status() for the bdrv_file child will be called, which returns 0x16 = BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_OFFSET_VALID | BDRV_BLOCK_ZERO. Now the return value inherits the zero flag. Returns 0x57 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_ZERO. > #2 bdrv_co_common_block_status_above > #3 bdrv_co_block_status_above > #4 bdrv_co_block_status > #5 cbw_co_snapshot_block_status > #6 bdrv_co_snapshot_block_status > #7 snapshot_access_co_block_status > #8 bdrv_co_do_block_status Return value is propagated all the way up to here, where the assertion failure happens, because BDRV_BLOCK_RECURSE and BDRV_BLOCK_ZERO are both set. > #9 bdrv_co_common_block_status_above > #10 bdrv_co_block_status_above > qemu#11 block_copy_block_status > qemu#12 block_copy_dirty_clusters > qemu#13 block_copy_common > qemu#14 block_copy_async_co_entry > qemu#15 coroutine_trampoline [0]: > #!/bin/bash > rm /tmp/disk.qcow2 > ./qemu-img create /tmp/disk.qcow2 -o preallocation=metadata -f qcow2 1G > ./qemu-img create /tmp/fleecing.qcow2 -f qcow2 1G > ./qemu-img create /tmp/backup.qcow2 -f qcow2 1G > ./qemu-system-x86_64 --qmp stdio \ > --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/disk.qcow2 \ > --blockdev qcow2,node-name=node1,file.driver=file,file.filename=/tmp/fleecing.qcow2 \ > --blockdev qcow2,node-name=node2,file.driver=file,file.filename=/tmp/backup.qcow2 \ > <<EOF > {"execute": "qmp_capabilities"} > {"execute": "blockdev-add", "arguments": { "driver": "copy-before-write", "file": "node0", "target": "node1", "node-name": "node3" } } > {"execute": "blockdev-add", "arguments": { "driver": "snapshot-access", "file": "node3", "node-name": "snap0" } } > {"execute": "blockdev-backup", "arguments": { "device": "snap0", "target": "node1", "sync": "full", "job-id": "backup0" } } > EOF Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Message-id: 20240116154839.401030-1-f.ebner@proxmox.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> (cherry picked from commit 8a9be79) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
stweil
pushed a commit
that referenced
this issue
Feb 24, 2024
Otherwise tcg_handle_interrupt() triggers an assertion failure: #5 0x0000555555c97369 in tcg_handle_interrupt (cpu=0x555557434cb0, mask=2) at ../accel/tcg/tcg-accel-ops.c:83 #6 tcg_handle_interrupt (cpu=0x555557434cb0, mask=2) at ../accel/tcg/tcg-accel-ops.c:81 #7 0x0000555555b4d58b in pic_irq_request (opaque=<optimized out>, irq=<optimized out>, level=1) at ../hw/i386/x86.c:555 #8 0x0000555555b4f218 in gsi_handler (opaque=0x5555579423d0, n=13, level=1) at ../hw/i386/x86.c:611 #9 0x00007fffa42bde14 in code_gen_buffer () #10 0x0000555555c724bb in cpu_tb_exec (cpu=cpu@entry=0x555557434cb0, itb=<optimized out>, tb_exit=tb_exit@entry=0x7fffe9bfd658) at ../accel/tcg/cpu-exec.c:457 Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1808 Reported-by: NyanCatTW1 <https://gitlab.com/a0939712328> Co-developed-by: Richard Henderson <richard.henderson@linaro.org>' Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit c1f27a0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
stweil
pushed a commit
that referenced
this issue
Feb 24, 2024
virtio_load() as a whole should run in coroutine context because it reads from the migration stream and we don't want this to block. However, it calls virtio_set_features_nocheck() and devices don't expect their .set_features callback to run in a coroutine and therefore call functions that may not be called in coroutine context. To fix this, drop out of coroutine context for calling virtio_set_features_nocheck(). Without this fix, the following crash was reported: #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007efc738c05d3 in __pthread_kill_internal (signo=6, threadid=<optimized out>) at pthread_kill.c:78 #2 0x00007efc73873d26 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26 #3 0x00007efc738477f3 in __GI_abort () at abort.c:79 #4 0x00007efc7384771b in __assert_fail_base (fmt=0x7efc739dbcb8 "", assertion=assertion@entry=0x560aebfbf5cf "!qemu_in_coroutine()", file=file@entry=0x560aebfcd2d4 "../block/graph-lock.c", line=line@entry=275, function=function@entry=0x560aebfcd34d "void bdrv_graph_rdlock_main_loop(void)") at assert.c:92 #5 0x00007efc7386ccc6 in __assert_fail (assertion=0x560aebfbf5cf "!qemu_in_coroutine()", file=0x560aebfcd2d4 "../block/graph-lock.c", line=275, function=0x560aebfcd34d "void bdrv_graph_rdlock_main_loop(void)") at assert.c:101 #6 0x0000560aebcd8dd6 in bdrv_register_buf () #7 0x0000560aeb97ed97 in ram_block_added.llvm () #8 0x0000560aebb8303f in ram_block_add.llvm () #9 0x0000560aebb834fa in qemu_ram_alloc_internal.llvm () #10 0x0000560aebb2ac98 in vfio_region_mmap () qemu#11 0x0000560aebb3ea0f in vfio_bars_register () qemu#12 0x0000560aebb3c628 in vfio_realize () qemu#13 0x0000560aeb90f0c2 in pci_qdev_realize () qemu#14 0x0000560aebc40305 in device_set_realized () qemu#15 0x0000560aebc48e07 in property_set_bool.llvm () qemu#16 0x0000560aebc46582 in object_property_set () qemu#17 0x0000560aebc4cd58 in object_property_set_qobject () qemu#18 0x0000560aebc46ba7 in object_property_set_bool () qemu#19 0x0000560aeb98b3ca in qdev_device_add_from_qdict () qemu#20 0x0000560aebb1fbaf in virtio_net_set_features () qemu#21 0x0000560aebb46b51 in virtio_set_features_nocheck () qemu#22 0x0000560aebb47107 in virtio_load () qemu#23 0x0000560aeb9ae7ce in vmstate_load_state () qemu#24 0x0000560aeb9d2ee9 in qemu_loadvm_state_main () qemu#25 0x0000560aeb9d45e1 in qemu_loadvm_state () qemu#26 0x0000560aeb9bc32c in process_incoming_migration_co.llvm () qemu#27 0x0000560aebeace56 in coroutine_trampoline.llvm () Cc: qemu-stable@nongnu.org Buglink: https://issues.redhat.com/browse/RHEL-832 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20230905145002.46391-3-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit 92e2e6a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
stweil
pushed a commit
that referenced
this issue
Feb 24, 2024
If there is a pending DMA operation during ide_bus_reset(), the fact
that the IDEState is already reset before the operation is canceled
can be problematic. In particular, ide_dma_cb() might be called and
then use the reset IDEState which contains the signature after the
reset. When used to construct the IO operation this leads to
ide_get_sector() returning 0 and nsector being 1. This is particularly
bad, because a write command will thus destroy the first sector which
often contains a partition table or similar.
Traces showing the unsolicited write happening with IDEState
0x5595af6949d0 being used after reset:
> ahci_port_write ahci(0x5595af6923f0)[0]: port write [reg:PxSCTL] @ 0x2c: 0x00000300
> ahci_reset_port ahci(0x5595af6923f0)[0]: reset port
> ide_reset IDEstate 0x5595af6949d0
> ide_reset IDEstate 0x5595af694da8
> ide_bus_reset_aio aio_cancel
> dma_aio_cancel dbs=0x7f64600089a0
> dma_blk_cb dbs=0x7f64600089a0 ret=0
> dma_complete dbs=0x7f64600089a0 ret=0 cb=0x5595acd40b30
> ahci_populate_sglist ahci(0x5595af6923f0)[0]
> ahci_dma_prepare_buf ahci(0x5595af6923f0)[0]: prepare buf limit=512 prepared=512
> ide_dma_cb IDEState 0x5595af6949d0; sector_num=0 n=1 cmd=DMA WRITE
> dma_blk_io dbs=0x7f6420802010 bs=0x5595ae2c6c30 offset=0 to_dev=1
> dma_blk_cb dbs=0x7f6420802010 ret=0
> (gdb) p *qiov
> $11 = {iov = 0x7f647c76d840, niov = 1, {{nalloc = 1, local_iov = {iov_base = 0x0,
> iov_len = 512}}, {__pad = "\001\000\000\000\000\000\000\000\000\000\000",
> size = 512}}}
> (gdb) bt
> #0 blk_aio_pwritev (blk=0x5595ae2c6c30, offset=0, qiov=0x7f6420802070, flags=0,
> cb=0x5595ace6f0b0 <dma_blk_cb>, opaque=0x7f6420802010)
> at ../block/block-backend.c:1682
> #1 0x00005595ace6f185 in dma_blk_cb (opaque=0x7f6420802010, ret=<optimized out>)
> at ../softmmu/dma-helpers.c:179
> #2 0x00005595ace6f778 in dma_blk_io (ctx=0x5595ae0609f0,
> sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
> io_func=io_func@entry=0x5595ace6ee30 <dma_blk_write_io_func>,
> io_func_opaque=io_func_opaque@entry=0x5595ae2c6c30,
> cb=0x5595acd40b30 <ide_dma_cb>, opaque=0x5595af6949d0,
> dir=DMA_DIRECTION_TO_DEVICE) at ../softmmu/dma-helpers.c:244
> #3 0x00005595ace6f90a in dma_blk_write (blk=0x5595ae2c6c30,
> sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
> cb=cb@entry=0x5595acd40b30 <ide_dma_cb>, opaque=opaque@entry=0x5595af6949d0)
> at ../softmmu/dma-helpers.c:280
> #4 0x00005595acd40e18 in ide_dma_cb (opaque=0x5595af6949d0, ret=<optimized out>)
> at ../hw/ide/core.c:953
> #5 0x00005595ace6f319 in dma_complete (ret=0, dbs=0x7f64600089a0)
> at ../softmmu/dma-helpers.c:107
> #6 dma_blk_cb (opaque=0x7f64600089a0, ret=0) at ../softmmu/dma-helpers.c:127
> #7 0x00005595ad12227d in blk_aio_complete (acb=0x7f6460005b10)
> at ../block/block-backend.c:1527
> #8 blk_aio_complete (acb=0x7f6460005b10) at ../block/block-backend.c:1524
> #9 blk_aio_write_entry (opaque=0x7f6460005b10) at ../block/block-backend.c:1594
> #10 0x00005595ad258cfb in coroutine_trampoline (i0=<optimized out>,
> i1=<optimized out>) at ../util/coroutine-ucontext.c:177
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: simon.rowe@nutanix.com
Message-ID: <20230906130922.142845-1-f.ebner@proxmox.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 7d75120)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
stweil
pushed a commit
that referenced
this issue
Feb 24, 2024
There is no architectural requirement that SME implies SVE, but our implementation currently assumes it. (FEAT_SME_FA64 does imply SVE.) So if you try to run a CPU with eg "-cpu max,sve=off" you quickly run into an assert when the guest tries to write to SMCR_EL1: #6 0x00007ffff4b38e96 in __GI___assert_fail (assertion=0x5555566e69cb "sm", file=0x5555566e5b24 "../../target/arm/helper.c", line=6865, function=0x5555566e82f0 <__PRETTY_FUNCTION__.31> "sve_vqm1_for_el_sm") at ./assert/assert.c:101 #7 0x0000555555ee33aa in sve_vqm1_for_el_sm (env=0x555557d291f0, el=2, sm=false) at ../../target/arm/helper.c:6865 #8 0x0000555555ee3407 in sve_vqm1_for_el (env=0x555557d291f0, el=2) at ../../target/arm/helper.c:6871 #9 0x0000555555ee3724 in smcr_write (env=0x555557d291f0, ri=0x555557da23b0, value=2147483663) at ../../target/arm/helper.c:6995 #10 0x0000555555fd1dba in helper_set_cp_reg64 (env=0x555557d291f0, rip=0x555557da23b0, value=2147483663) at ../../target/arm/tcg/op_helper.c:839 qemu#11 0x00007fff60056781 in code_gen_buffer () Avoid this unsupported and slightly odd combination by disabling SME when SVE is not present. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2005 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20231127173318.674758-1-peter.maydell@linaro.org (cherry picked from commit f7767ca) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
stweil
pushed a commit
that referenced
this issue
Feb 24, 2024
…ock_status Using fleecing backup like in [0] on a qcow2 image (with metadata preallocation) can lead to the following assertion failure: > bdrv_co_do_block_status: Assertion `!(ret & BDRV_BLOCK_ZERO)' failed. In the reproducer [0], it happens because the BDRV_BLOCK_RECURSE flag will be set by the qcow2 driver, so the caller will recursively check the file child. Then the BDRV_BLOCK_ZERO set too. Later up the call chain, in bdrv_co_do_block_status() for the snapshot-access driver, the assertion failure will happen, because both flags are set. To fix it, clear the recurse flag after the recursive check was done. In detail: > #0 qcow2_co_block_status Returns 0x45 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID. > #1 bdrv_co_do_block_status Because of the data flag, bdrv_co_do_block_status() will now also set BDRV_BLOCK_ALLOCATED. Because of the recurse flag, bdrv_co_do_block_status() for the bdrv_file child will be called, which returns 0x16 = BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_OFFSET_VALID | BDRV_BLOCK_ZERO. Now the return value inherits the zero flag. Returns 0x57 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_ZERO. > #2 bdrv_co_common_block_status_above > #3 bdrv_co_block_status_above > #4 bdrv_co_block_status > #5 cbw_co_snapshot_block_status > #6 bdrv_co_snapshot_block_status > #7 snapshot_access_co_block_status > #8 bdrv_co_do_block_status Return value is propagated all the way up to here, where the assertion failure happens, because BDRV_BLOCK_RECURSE and BDRV_BLOCK_ZERO are both set. > #9 bdrv_co_common_block_status_above > #10 bdrv_co_block_status_above > qemu#11 block_copy_block_status > qemu#12 block_copy_dirty_clusters > qemu#13 block_copy_common > qemu#14 block_copy_async_co_entry > qemu#15 coroutine_trampoline [0]: > #!/bin/bash > rm /tmp/disk.qcow2 > ./qemu-img create /tmp/disk.qcow2 -o preallocation=metadata -f qcow2 1G > ./qemu-img create /tmp/fleecing.qcow2 -f qcow2 1G > ./qemu-img create /tmp/backup.qcow2 -f qcow2 1G > ./qemu-system-x86_64 --qmp stdio \ > --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/disk.qcow2 \ > --blockdev qcow2,node-name=node1,file.driver=file,file.filename=/tmp/fleecing.qcow2 \ > --blockdev qcow2,node-name=node2,file.driver=file,file.filename=/tmp/backup.qcow2 \ > <<EOF > {"execute": "qmp_capabilities"} > {"execute": "blockdev-add", "arguments": { "driver": "copy-before-write", "file": "node0", "target": "node1", "node-name": "node3" } } > {"execute": "blockdev-add", "arguments": { "driver": "snapshot-access", "file": "node3", "node-name": "snap0" } } > {"execute": "blockdev-backup", "arguments": { "device": "snap0", "target": "node1", "sync": "full", "job-id": "backup0" } } > EOF Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Message-id: 20240116154839.401030-1-f.ebner@proxmox.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> (cherry picked from commit 8a9be79) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
stweil
pushed a commit
that referenced
this issue
Mar 4, 2024
…ng ARM_FEATURE_PMU It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile CPU, and in fact if you try to do it we will assert: #6 0x00007ffff4b95e96 in __GI___assert_fail (assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101 #7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600 #8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595 #9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512 We might call pmu_counter_enabled() on an M-profile CPU (for example from the migration pre/post hooks in machine.c); this should always return false because these CPUs don't set ARM_FEATURE_PMU. Avoid the assertion by not calling arm_mdcr_el2_eff() before we have done the early return for "PMU not present". This fixes an assertion failure if you try to do a loadvm or savevm for an M-profile board. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240208153346.970021-1-peter.maydell@linaro.org (cherry picked from commit ac1d88e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
stweil
pushed a commit
that referenced
this issue
Apr 25, 2024
…B changes
The old_bs variable in bdrv_next() is currently determined by looking
at the old block backend. However, if the block graph changes before
the next bdrv_next() call, it might be that the associated BDS is not
the same that was referenced previously. In that case, the wrong BDS
is unreferenced, leading to an assertion failure later:
> bdrv_unref: Assertion `bs->refcnt > 0' failed.
In particular, this can happen in the context of bdrv_flush_all(),
when polling for bdrv_co_flush() in the generated co-wrapper leads to
a graph change (for example with a stream block job [0]).
A racy reproducer:
> #!/bin/bash
> rm -f /tmp/backing.qcow2
> rm -f /tmp/top.qcow2
> ./qemu-img create /tmp/backing.qcow2 -f qcow2 64M
> ./qemu-io -c "write -P42 0x0 0x1" /tmp/backing.qcow2
> ./qemu-img create /tmp/top.qcow2 -f qcow2 64M -b /tmp/backing.qcow2 -F qcow2
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/top.qcow2 \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "block-stream", "arguments": { "job-id": "stream0", "device": "node0" } }
> {"execute": "quit"}
> EOF
[0]:
> #0 bdrv_replace_child_tran (child=..., new_bs=..., tran=...)
> #1 bdrv_replace_node_noperm (from=..., to=..., auto_skip=..., tran=..., errp=...)
> #2 bdrv_replace_node_common (from=..., to=..., auto_skip=..., detach_subchain=..., errp=...)
> #3 bdrv_drop_filter (bs=..., errp=...)
> #4 bdrv_cor_filter_drop (cor_filter_bs=...)
> #5 stream_prepare (job=...)
> #6 job_prepare_locked (job=...)
> #7 job_txn_apply_locked (fn=..., job=...)
> #8 job_do_finalize_locked (job=...)
> #9 job_exit (opaque=...)
> #10 aio_bh_poll (ctx=...)
> qemu#11 aio_poll (ctx=..., blocking=...)
> qemu#12 bdrv_poll_co (s=...)
> qemu#13 bdrv_flush (bs=...)
> qemu#14 bdrv_flush_all ()
> qemu#15 do_vm_stop (state=..., send_stop=...)
> qemu#16 vm_shutdown ()
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240322095009.346989-3-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
stweil
pushed a commit
that referenced
this issue
Apr 25, 2024
When vhost-user or vhost-kernel is handling virtio net datapath, QEMU should not touch used ring. But with vhost-user socket reconnect scenario, in a very rare case (has pending kick event). VRING_USED_F_NO_NOTIFY is set by QEMU in following code path: #0 virtio_queue_split_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:511 #1 0x0000559d6dbf033b in virtio_queue_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:576 #2 0x0000559d6dbbbdbc in virtio_net_handle_tx_bh (vdev=0x559d703a6aa0, vq=0x7ff5f4c920a8) at ../hw/net/virtio-net.c:2801 #3 0x0000559d6dbf4791 in virtio_queue_notify_vq (vq=0x7ff5f4c920a8) at ../hw/virtio/virtio.c:2248 #4 0x0000559d6dbf79da in virtio_queue_host_notifier_read (n=0x7ff5f4c9211c) at ../hw/virtio/virtio.c:3525 #5 0x0000559d6d9a5814 in virtio_bus_cleanup_host_notifier (bus=0x559d703a6a20, n=1) at ../hw/virtio/virtio-bus.c:321 #6 0x0000559d6dbf83c9 in virtio_device_stop_ioeventfd_impl (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3774 #7 0x0000559d6d9a55c8 in virtio_bus_stop_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:259 #8 0x0000559d6d9a53e8 in virtio_bus_grab_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:199 #9 0x0000559d6dbf841c in virtio_device_grab_ioeventfd (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3783 #10 0x0000559d6d9bde18 in vhost_dev_enable_notifiers (hdev=0x559d707edd70, vdev=0x559d703a6aa0) at ../hw/virtio/vhost.c:1592 qemu#11 0x0000559d6d89a0b8 in vhost_net_start_one (net=0x559d707edd70, dev=0x559d703a6aa0) at ../hw/net/vhost_net.c:266 qemu#12 0x0000559d6d89a6df in vhost_net_start (dev=0x559d703a6aa0, ncs=0x559d7048d890, data_queue_pairs=31, cvq=0) at ../hw/net/vhost_net.c:412 qemu#13 0x0000559d6dbb5b89 in virtio_net_vhost_status (n=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:311 qemu#14 0x0000559d6dbb5e34 in virtio_net_set_status (vdev=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:392 qemu#15 0x0000559d6dbb60d8 in virtio_net_set_link_status (nc=0x559d7048d890) at ../hw/net/virtio-net.c:455 qemu#16 0x0000559d6da64863 in qmp_set_link (name=0x559d6f0b83d0 "hostnet1", up=true, errp=0x7ffdd76569f0) at ../net/net.c:1459 qemu#17 0x0000559d6da7226e in net_vhost_user_event (opaque=0x559d6f0b83d0, event=CHR_EVENT_OPENED) at ../net/vhost-user.c:301 qemu#18 0x0000559d6ddc7f63 in chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:62 qemu#19 0x0000559d6ddc7fdc in qemu_chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:82 This issue causes guest kernel stop kicking device and traffic stop. Add vhost_started check in virtio_net_handle_tx_bh to fix this wrong VRING_USED_F_NO_NOTIFY set. Signed-off-by: Yajun Wu <yajunw@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-ID: <20240402045109.97729-1-yajunw@nvidia.com> [PMD: Use unlikely()] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
stweil
pushed a commit
that referenced
this issue
Apr 25, 2024
This patch improves error handling in virtio_snd_handle_tx_xfer()
and virtio_snd_handle_rx_xfer() in the VirtIO sound driver. Previously,
'goto' statements were used for error paths, leading to unnecessary
processing and potential null pointer dereferences. Now, 'continue' is
used to skip the rest of the current loop iteration for errors such as
message size discrepancies or null streams, reducing crash risks.
ASAN log illustrating the issue addressed:
ERROR: AddressSanitizer: SEGV on unknown address 0x0000000000b4
#0 0x57cea39967b8 in qemu_mutex_lock_impl qemu/util/qemu-thread-posix.c:92:5
#1 0x57cea128c462 in qemu_mutex_lock qemu/include/qemu/thread.h:122:5
#2 0x57cea128d72f in qemu_lockable_lock qemu/include/qemu/lockable.h:95:5
#3 0x57cea128c294 in qemu_lockable_auto_lock qemu/include/qemu/lockable.h:105:5
#4 0x57cea1285eb2 in virtio_snd_handle_rx_xfer qemu/hw/audio/virtio-snd.c:1026:9
#5 0x57cea2caebbc in virtio_queue_notify_vq qemu/hw/virtio/virtio.c:2268:9
#6 0x57cea2cae412 in virtio_queue_host_notifier_read qemu/hw/virtio/virtio.c:3671:9
#7 0x57cea39822f1 in aio_dispatch_handler qemu/util/aio-posix.c:372:9
#8 0x57cea3979385 in aio_dispatch_handlers qemu/util/aio-posix.c:414:20
#9 0x57cea3978eb1 in aio_dispatch qemu/util/aio-posix.c:424:5
#10 0x57cea3a1eede in aio_ctx_dispatch qemu/util/async.c:360:5
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20240322110827.568412-1-zheyuma97@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
stweil
pushed a commit
that referenced
this issue
Apr 25, 2024
Replace qemu_bh_new_guarded() by virtio_bh_new_guarded()
so the bus and device use the same guard. Otherwise the
DMA-reentrancy protection can be bypassed:
$ cat << EOF | qemu-system-i386 -display none -nodefaults \
-machine q35,accel=qtest \
-m 512M \
-device virtio-gpu \
-qtest stdio
outl 0xcf8 0x80000820
outl 0xcfc 0xe0004000
outl 0xcf8 0x80000804
outw 0xcfc 0x06
write 0xe0004030 0x4 0x024000e0
write 0xe0004028 0x1 0xff
write 0xe0004020 0x4 0x00009300
write 0xe000401c 0x1 0x01
write 0x101 0x1 0x04
write 0x103 0x1 0x1c
write 0x9301c8 0x1 0x18
write 0x105 0x1 0x1c
write 0x107 0x1 0x1c
write 0x109 0x1 0x1c
write 0x10b 0x1 0x00
write 0x10d 0x1 0x00
write 0x10f 0x1 0x00
write 0x111 0x1 0x00
write 0x113 0x1 0x00
write 0x115 0x1 0x00
write 0x117 0x1 0x00
write 0x119 0x1 0x00
write 0x11b 0x1 0x00
write 0x11d 0x1 0x00
write 0x11f 0x1 0x00
write 0x121 0x1 0x00
write 0x123 0x1 0x00
write 0x125 0x1 0x00
write 0x127 0x1 0x00
write 0x129 0x1 0x00
write 0x12b 0x1 0x00
write 0x12d 0x1 0x00
write 0x12f 0x1 0x00
write 0x131 0x1 0x00
write 0x133 0x1 0x00
write 0x135 0x1 0x00
write 0x137 0x1 0x00
write 0x139 0x1 0x00
write 0xe0007003 0x1 0x00
EOF
...
=================================================================
==276099==ERROR: AddressSanitizer: heap-use-after-free on address 0x60d000011178
at pc 0x562cc3b736c7 bp 0x7ffed49dee60 sp 0x7ffed49dee58
READ of size 8 at 0x60d000011178 thread T0
#0 0x562cc3b736c6 in virtio_gpu_ctrl_response hw/display/virtio-gpu.c:180:42
#1 0x562cc3b7c40b in virtio_gpu_ctrl_response_nodata hw/display/virtio-gpu.c:192:5
#2 0x562cc3b7c40b in virtio_gpu_simple_process_cmd hw/display/virtio-gpu.c:1015:13
#3 0x562cc3b82873 in virtio_gpu_process_cmdq hw/display/virtio-gpu.c:1050:9
#4 0x562cc4a85514 in aio_bh_call util/async.c:169:5
#5 0x562cc4a85c52 in aio_bh_poll util/async.c:216:13
#6 0x562cc4a1a79b in aio_dispatch util/aio-posix.c:423:5
#7 0x562cc4a8a2da in aio_ctx_dispatch util/async.c:358:5
#8 0x7f36840547a8 in g_main_context_dispatch (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x547a8)
#9 0x562cc4a8b753 in glib_pollfds_poll util/main-loop.c:290:9
#10 0x562cc4a8b753 in os_host_main_loop_wait util/main-loop.c:313:5
qemu#11 0x562cc4a8b753 in main_loop_wait util/main-loop.c:592:11
qemu#12 0x562cc3938186 in qemu_main_loop system/runstate.c:782:9
qemu#13 0x562cc43b7af5 in qemu_default_main system/main.c:37:14
qemu#14 0x7f3683a6c189 in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
qemu#15 0x7f3683a6c244 in __libc_start_main csu/../csu/libc-start.c:381:3
qemu#16 0x562cc2a58ac0 in _start (qemu-system-i386+0x231bac0)
0x60d000011178 is located 56 bytes inside of 136-byte region [0x60d000011140,0x60d0000111c8)
freed by thread T0 here:
#0 0x562cc2adb662 in __interceptor_free (qemu-system-i386+0x239e662)
#1 0x562cc3b86b21 in virtio_gpu_reset hw/display/virtio-gpu.c:1524:9
#2 0x562cc416e20e in virtio_reset hw/virtio/virtio.c:2145:9
#3 0x562cc37c5644 in virtio_pci_reset hw/virtio/virtio-pci.c:2249:5
#4 0x562cc4233758 in memory_region_write_accessor system/memory.c:497:5
#5 0x562cc4232eea in access_with_adjusted_size system/memory.c:573:18
previously allocated by thread T0 here:
#0 0x562cc2adb90e in malloc (qemu-system-i386+0x239e90e)
#1 0x7f368405a678 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5a678)
#2 0x562cc4163ffc in virtqueue_split_pop hw/virtio/virtio.c:1612:12
#3 0x562cc4163ffc in virtqueue_pop hw/virtio/virtio.c:1783:16
#4 0x562cc3b91a95 in virtio_gpu_handle_ctrl hw/display/virtio-gpu.c:1112:15
#5 0x562cc4a85514 in aio_bh_call util/async.c:169:5
#6 0x562cc4a85c52 in aio_bh_poll util/async.c:216:13
#7 0x562cc4a1a79b in aio_dispatch util/aio-posix.c:423:5
SUMMARY: AddressSanitizer: heap-use-after-free hw/display/virtio-gpu.c:180:42 in virtio_gpu_ctrl_response
With this change, the same reproducer triggers:
qemu-system-i386: warning: Blocked re-entrant IO on MemoryRegion: virtio-pci-common-virtio-gpu at addr: 0x6
Fixes: CVE-2024-3446
Cc: qemu-stable@nongnu.org
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Reported-by: Xiao Lei <nop.leixiao@gmail.com>
Reported-by: Yiming Tao <taoym@zju.edu.cn>
Buglink: https://bugs.launchpad.net/qemu/+bug/1888606
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240409105537.18308-3-philmd@linaro.org>
stweil
pushed a commit
that referenced
this issue
Apr 25, 2024
nand_command() and nand_getio() don't check @offset points into the block, nor the available data length (s->iolen) is not negative. In order to fix: - check the offset is in range in nand_blk_load_NAND_PAGE_SIZE(), - do not set @iolen if blk_load() failed. Reproducer: $ cat << EOF | qemu-system-arm -machine tosa \ -monitor none -serial none \ -display none -qtest stdio write 0x10000111 0x1 0xca write 0x10000104 0x1 0x47 write 0x1000ca04 0x1 0xd7 write 0x1000ca01 0x1 0xe0 write 0x1000ca04 0x1 0x71 write 0x1000ca00 0x1 0x50 write 0x1000ca04 0x1 0xd7 read 0x1000ca02 0x1 write 0x1000ca01 0x1 0x10 EOF ================================================================= ==15750==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61f000000de0 at pc 0x560e61557210 bp 0x7ffcfc4a59f0 sp 0x7ffcfc4a59e8 READ of size 1 at 0x61f000000de0 thread T0 #0 0x560e6155720f in mem_and hw/block/nand.c:101:20 #1 0x560e6155ac9c in nand_blk_write_512 hw/block/nand.c:663:9 #2 0x560e61544200 in nand_command hw/block/nand.c:293:13 #3 0x560e6153cc83 in nand_setio hw/block/nand.c:520:13 #4 0x560e61a0a69e in tc6393xb_nand_writeb hw/display/tc6393xb.c:380:13 #5 0x560e619f9bf7 in tc6393xb_writeb hw/display/tc6393xb.c:524:9 #6 0x560e647c7d03 in memory_region_write_accessor softmmu/memory.c:492:5 #7 0x560e647c7641 in access_with_adjusted_size softmmu/memory.c:554:18 #8 0x560e647c5f66 in memory_region_dispatch_write softmmu/memory.c:1514:16 #9 0x560e6485409e in flatview_write_continue softmmu/physmem.c:2825:23 #10 0x560e648421eb in flatview_write softmmu/physmem.c:2867:12 qemu#11 0x560e64841ca8 in address_space_write softmmu/physmem.c:2963:18 qemu#12 0x560e61170162 in qemu_writeb tests/qtest/videzzo/videzzo_qemu.c:1080:5 qemu#13 0x560e6116eef7 in dispatch_mmio_write tests/qtest/videzzo/videzzo_qemu.c:1227:28 0x61f000000de0 is located 0 bytes to the right of 3424-byte region [0x61f000000080,0x61f000000de0) allocated by thread T0 here: #0 0x560e611276cf in malloc /root/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3 #1 0x7f7959a87e98 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57e98) #2 0x560e64b98871 in object_new qom/object.c:749:12 #3 0x560e64b5d1a1 in qdev_new hw/core/qdev.c:153:19 #4 0x560e61547ea5 in nand_init hw/block/nand.c:639:11 #5 0x560e619f8772 in tc6393xb_init hw/display/tc6393xb.c:558:16 #6 0x560e6390bad2 in tosa_init hw/arm/tosa.c:250:12 SUMMARY: AddressSanitizer: heap-buffer-overflow hw/block/nand.c:101:20 in mem_and ==15750==ABORTING Broken since introduction in commit 3e3d581 ("NAND Flash memory emulation and ECC calculation helpers for use by NAND controllers"). Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1445 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1446 Reported-by: Qiang Liu <cyruscyliu@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240409135944.24997-4-philmd@linaro.org>
stweil
pushed a commit
that referenced
this issue
Apr 25, 2024
When the MAC Interface Layer (MIL) transmit FIFO is full, truncate the packet, and raise the Transmitter Error (TXE) flag. Broken since model introduction in commit 2a42499 ("LAN9118 emulation"). When using the reproducer from https://gitlab.com/qemu-project/qemu/-/issues/2267 we get: hw/net/lan9118.c:798:17: runtime error: index 2048 out of bounds for type 'uint8_t[2048]' (aka 'unsigned char[2048]') #0 0x563ec9a057b1 in tx_fifo_push hw/net/lan9118.c:798:43 #1 0x563ec99fbb28 in lan9118_writel hw/net/lan9118.c:1042:9 #2 0x563ec99f2de2 in lan9118_16bit_mode_write hw/net/lan9118.c:1205:9 #3 0x563ecbf78013 in memory_region_write_accessor system/memory.c:497:5 #4 0x563ecbf776f5 in access_with_adjusted_size system/memory.c:573:18 #5 0x563ecbf75643 in memory_region_dispatch_write system/memory.c:1521:16 #6 0x563ecc01bade in flatview_write_continue_step system/physmem.c:2713:18 #7 0x563ecc01b374 in flatview_write_continue system/physmem.c:2743:19 #8 0x563ecbff1c9b in flatview_write system/physmem.c:2774:12 #9 0x563ecbff1768 in address_space_write system/physmem.c:2894:18 ... [*] LAN9118 DS00002266B.pdf, Table 5.3.3 "INTERRUPT STATUS REGISTER" Cc: qemu-stable@nongnu.org Reported-by: Will Lester Reported-by: Chuhong Yuan <hslester96@gmail.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2267 Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20240409133801.23503-3-philmd@linaro.org>
stweil
pushed a commit
that referenced
this issue
Apr 25, 2024
Per "SD Host Controller Standard Specification Version 3.00":
* 2.2.5 Transfer Mode Register (Offset 00Ch)
Writes to this register shall be ignored when the Command
Inhibit (DAT) in the Present State register is 1.
Do not update the TRNMOD register when Command Inhibit (DAT)
bit is set to avoid the present-status register going out of
sync, leading to malicious guest using DMA mode and overflowing
the FIFO buffer:
$ cat << EOF | qemu-system-i386 \
-display none -nographic -nodefaults \
-machine accel=qtest -m 512M \
-device sdhci-pci,sd-spec-version=3 \
-device sd-card,drive=mydrive \
-drive if=none,index=0,file=null-co://,format=raw,id=mydrive \
-qtest stdio
outl 0xcf8 0x80001013
outl 0xcfc 0x91
outl 0xcf8 0x80001001
outl 0xcfc 0x06000000
write 0x9100002c 0x1 0x05
write 0x91000058 0x1 0x16
write 0x91000005 0x1 0x04
write 0x91000028 0x1 0x08
write 0x16 0x1 0x21
write 0x19 0x1 0x20
write 0x9100000c 0x1 0x01
write 0x9100000e 0x1 0x20
write 0x9100000f 0x1 0x00
write 0x9100000c 0x1 0x00
write 0x91000020 0x1 0x00
EOF
Stack trace (part):
=================================================================
==89993==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x615000029900 at pc 0x55d5f885700d bp 0x7ffc1e1e9470 sp 0x7ffc1e1e9468
WRITE of size 1 at 0x615000029900 thread T0
#0 0x55d5f885700c in sdhci_write_dataport hw/sd/sdhci.c:564:39
#1 0x55d5f8849150 in sdhci_write hw/sd/sdhci.c:1223:13
#2 0x55d5fa01db63 in memory_region_write_accessor system/memory.c:497:5
#3 0x55d5fa01d245 in access_with_adjusted_size system/memory.c:573:18
#4 0x55d5fa01b1a9 in memory_region_dispatch_write system/memory.c:1521:16
#5 0x55d5fa09f5c9 in flatview_write_continue system/physmem.c:2711:23
#6 0x55d5fa08f78b in flatview_write system/physmem.c:2753:12
#7 0x55d5fa08f258 in address_space_write system/physmem.c:2860:18
...
0x615000029900 is located 0 bytes to the right of 512-byte region
[0x615000029700,0x615000029900) allocated by thread T0 here:
#0 0x55d5f7237b27 in __interceptor_calloc
#1 0x7f9e36dd4c50 in g_malloc0
#2 0x55d5f88672f7 in sdhci_pci_realize hw/sd/sdhci-pci.c:36:5
#3 0x55d5f844b582 in pci_qdev_realize hw/pci/pci.c:2092:9
#4 0x55d5fa2ee74b in device_set_realized hw/core/qdev.c:510:13
#5 0x55d5fa325bfb in property_set_bool qom/object.c:2358:5
#6 0x55d5fa31ea45 in object_property_set qom/object.c:1472:5
#7 0x55d5fa332509 in object_property_set_qobject om/qom-qobject.c:28:10
#8 0x55d5fa31f6ed in object_property_set_bool qom/object.c:1541:15
#9 0x55d5fa2e2948 in qdev_realize hw/core/qdev.c:292:12
#10 0x55d5f8eed3f1 in qdev_device_add_from_qdict system/qdev-monitor.c:719:10
qemu#11 0x55d5f8eef7ff in qdev_device_add system/qdev-monitor.c:738:11
qemu#12 0x55d5f8f211f0 in device_init_func system/vl.c:1200:11
qemu#13 0x55d5fad0877d in qemu_opts_foreach util/qemu-option.c:1135:14
qemu#14 0x55d5f8f0df9c in qemu_create_cli_devices system/vl.c:2638:5
qemu#15 0x55d5f8f0db24 in qmp_x_exit_preconfig system/vl.c:2706:5
qemu#16 0x55d5f8f14dc0 in qemu_init system/vl.c:3737:9
...
SUMMARY: AddressSanitizer: heap-buffer-overflow hw/sd/sdhci.c:564:39
in sdhci_write_dataport
Add assertions to ensure the fifo_buffer[] is not overflowed by
malicious accesses to the Buffer Data Port register.
Fixes: CVE-2024-3447
Cc: qemu-stable@nongnu.org
Fixes: d7dfca0 ("hw/sdhci: introduce standard SD host controller")
Buglink: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=58813
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <CAFEAcA9iLiv1XGTGKeopgMa8Y9+8kvptvsb8z2OBeuy+5=NUfg@mail.gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240409145524.27913-1-philmd@linaro.org>
stweil
pushed a commit
that referenced
this issue
Apr 25, 2024
If a fragmented packet size is too short, do not try to
calculate its checksum.
Reproduced using:
$ cat << EOF | qemu-system-i386 -display none -nodefaults \
-machine q35,accel=qtest -m 32M \
-device igb,netdev=net0 \
-netdev user,id=net0 \
-qtest stdio
outl 0xcf8 0x80000810
outl 0xcfc 0xe0000000
outl 0xcf8 0x80000804
outw 0xcfc 0x06
write 0xe0000403 0x1 0x02
writel 0xe0003808 0xffffffff
write 0xe000381a 0x1 0x5b
write 0xe000381b 0x1 0x00
EOF
Assertion failed: (offset == 0), function iov_from_buf_full, file util/iov.c, line 39.
#1 0x5575e81e952a in iov_from_buf_full qemu/util/iov.c:39:5
#2 0x5575e6500768 in net_tx_pkt_update_sctp_checksum qemu/hw/net/net_tx_pkt.c:144:9
#3 0x5575e659f3e1 in igb_setup_tx_offloads qemu/hw/net/igb_core.c:478:11
#4 0x5575e659f3e1 in igb_tx_pkt_send qemu/hw/net/igb_core.c:552:10
#5 0x5575e659f3e1 in igb_process_tx_desc qemu/hw/net/igb_core.c:671:17
#6 0x5575e659f3e1 in igb_start_xmit qemu/hw/net/igb_core.c:903:9
#7 0x5575e659f3e1 in igb_set_tdt qemu/hw/net/igb_core.c:2812:5
#8 0x5575e657d6a4 in igb_core_write qemu/hw/net/igb_core.c:4248:9
Fixes: CVE-2024-3567
Cc: qemu-stable@nongnu.org
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Fixes: f199b13 ("igb: Implement Tx SCTP CSO")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2273
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240410070459.49112-1-philmd@linaro.org>
stweil
pushed a commit
that referenced
this issue
Apr 25, 2024
…coroutine()' failed. bdrv_activate_all() should not be called from the coroutine context, move it to the QEMU thread colo_process_incoming_thread() with the bql_lock protected. The backtrace is as follows: #4 0x0000561af7948362 in bdrv_graph_rdlock_main_loop () at ../block/graph-lock.c:260 #5 0x0000561af7907a68 in graph_lockable_auto_lock_mainloop (x=0x7fd29810be7b) at /patch/to/qemu/include/block/graph-lock.h:259 #6 0x0000561af79167d1 in bdrv_activate_all (errp=0x7fd29810bed0) at ../block.c:6906 #7 0x0000561af762b4af in colo_incoming_co () at ../migration/colo.c:935 #8 0x0000561af7607e57 in process_incoming_migration_co (opaque=0x0) at ../migration/migration.c:793 #9 0x0000561af7adbeeb in coroutine_trampoline (i0=-106876144, i1=22042) at ../util/coroutine-ucontext.c:175 #10 0x00007fd2a5cf21c0 in () at /lib64/libc.so.6 Cc: qemu-stable@nongnu.org Cc: Fabiano Rosas <farosas@suse.de> Closes: https://gitlab.com/qemu-project/qemu/-/issues/2277 Fixes: 2b3912f ("block: Mark bdrv_first_blk() and bdrv_is_root_node() GRAPH_RDLOCK") Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Tested-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240417025634.1014582-1-lizhijian@fujitsu.com Signed-off-by: Peter Xu <peterx@redhat.com>
stweil
pushed a commit
that referenced
this issue
Jul 20, 2024
For multi-bytes commands, our implementation uses the @data_start
and @data_offset fields to track byte access. We initialize the
command start/offset in buffer once. Malicious guest might abuse
by switching command while staying in the 'transfer' state, switching
command buffer size, and our implementation can access out of buffer
boundary. For example, CMD17 (READ_SINGLE_BLOCK) allows to read up to
512 bytes, and CMD13 (SEND_STATUS) up to 64 bytes. By switching from
CMD17 to CMD13 (see reproducer below), bytes [64-511] are out of the
'status' buffer.
Our implementation return R0 status code for unexpected commands.
Such in-transaction command switch is unexpected and returns R0.
This is a good place to reset the start/offset fields to avoid
malicious accesses.
Can be reproduced running:
$ export UBSAN_OPTIONS=print_stacktrace=1:halt_on_error=1
$ cat << EOF | qemu-system-i386 \
-display none -nographic \
-machine accel=qtest -m 512M \
-nodefaults \
-device sdhci-pci,sd-spec-version=3 \
-device sd-card,drive=mydrive \
-drive if=none,index=0,file=null-co://,format=raw,id=mydrive \
-qtest stdio -trace sd\* -trace -sdbus_read
outl 0xcf8 0x80001010
outl 0xcfc 0xe0000000
outl 0xcf8 0x80001004
outw 0xcfc 0x02
write 0xe000002c 0x1 0x05
write 0xe000000f 0x1 0x37
write 0xe000000a 0x1 0x01
write 0xe000000f 0x1 0x29
write 0xe000000f 0x1 0x02
write 0xe000000f 0x1 0x03
write 0xe000000c 0x1 0x32
write 0xe000000f 0x1 0x06
write 0xe0000005 0x1 0x01
write 0xe0000007 0x1 0x01
write 0xe0000003 0x1 0x00
write 0xe000000f 0x1 0x11
write 0xe000002a 0x1 0x01
write 0xe000002a 0x1 0x02
write 0xe000000f 0x1 0x0d
write 0xe000002a 0x1 0x01
write 0xe000002a 0x1 0x02
EOF
hw/sd/sd.c:1984:15: runtime error: index 256 out of bounds for type 'uint8_t [64]'
#0 sd_read_byte hw/sd/sd.c:1984:15
#1 sdbus_read_data hw/sd/core.c:157:23
#2 sdhci_read_block_from_card hw/sd/sdhci.c:423:9
#3 sdhci_blkgap_write hw/sd/sdhci.c:1074:13
#4 sdhci_write hw/sd/sdhci.c:1195:13
#5 memory_region_write_accessor softmmu/memory.c:492:5
#6 access_with_adjusted_size softmmu/memory.c:554:18
#7 memory_region_dispatch_write softmmu/memory.c
#8 flatview_write_continue softmmu/physmem.c:2778:23
#9 flatview_write softmmu/physmem.c:2818:14
#10 address_space_write softmmu/physmem.c:2910:18
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior hw/sd/sd.c:1984:15
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/487
Buglink: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=36240
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240408141717.66154-2-philmd@linaro.org>
stweil
pushed a commit
that referenced
this issue
Jul 20, 2024
ASan detected a global-buffer-overflow error in the aspeed_gpio_read()
function. This issue occurred when reading beyond the bounds of the
reg_table.
To enhance the safety and maintainability of the Aspeed GPIO code, this commit
introduces a reg_table_count member to the AspeedGPIOClass structure. This
change ensures that the size of the GPIO register table is explicitly tracked
and initialized, reducing the risk of errors if new register tables are
introduced in the future.
Reproducer:
cat << EOF | qemu-system-aarch64 -display none \
-machine accel=qtest, -m 512M -machine ast1030-evb -qtest stdio
readq 0x7e780272
EOF
ASAN log indicating the issue:
==2602930==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55a5da29e128 at pc 0x55a5d700dc62 bp 0x7fff096c4e90 sp 0x7fff096c4e88
READ of size 2 at 0x55a5da29e128 thread T0
#0 0x55a5d700dc61 in aspeed_gpio_read hw/gpio/aspeed_gpio.c:564:14
#1 0x55a5d933f3ab in memory_region_read_accessor system/memory.c:445:11
#2 0x55a5d92fba40 in access_with_adjusted_size system/memory.c:573:18
#3 0x55a5d92f842c in memory_region_dispatch_read1 system/memory.c:1426:16
#4 0x55a5d92f7b68 in memory_region_dispatch_read system/memory.c:1459:9
#5 0x55a5d9376ad1 in flatview_read_continue_step system/physmem.c:2836:18
#6 0x55a5d9376399 in flatview_read_continue system/physmem.c:2877:19
#7 0x55a5d93775b8 in flatview_read system/physmem.c:2907:12
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2355
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
When the creds->username property is set we allocate memory
for it in qcrypto_tls_creds_psk_prop_set_username(), but
we never free this when the QCryptoTLSCredsPSK is destroyed.
Free the memory in finalize.
This fixes a LeakSanitizer complaint in migration-test:
$ (cd build/asan; ASAN_OPTIONS="fast_unwind_on_malloc=0" QTEST_QEMU_BINARY=./qemu-system-x86_64 ./tests/qtest/migration-test --tap -k -p /x86_64/migration/precopy/unix/tls/psk)
=================================================================
==3867512==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x5624e5c99dee in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218edee) (BuildId: a9e623fa1009a9435c0142c037cd7b8c1ad04ce3)
#1 0x7fb199ae9738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7fb199afe583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x5624e82ea919 in qcrypto_tls_creds_psk_prop_set_username /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../crypto/tlscredspsk.c:255:23
#4 0x5624e812c6b5 in property_set_str /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object.c:2277:5
#5 0x5624e8125ce5 in object_property_set /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object.c:1463:5
#6 0x5624e8136e7c in object_set_properties_from_qdict /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:55:14
#7 0x5624e81372d2 in user_creatable_add_type /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:112:5
#8 0x5624e8137964 in user_creatable_add_qapi /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/object_interfaces.c:157:11
#9 0x5624e891ba3c in qmp_object_add /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qom/qom-qmp-cmds.c:227:5
#10 0x5624e8af9118 in qmp_marshal_object_add /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qapi/qapi-commands-qom.c:337:5
qemu#11 0x5624e8bd1d49 in do_qmp_dispatch_bh /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../qapi/qmp-dispatch.c:128:5
qemu#12 0x5624e8cb2531 in aio_bh_call /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:171:5
qemu#13 0x5624e8cb340c in aio_bh_poll /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:218:13
qemu#14 0x5624e8c0be98 in aio_dispatch /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/aio-posix.c:423:5
qemu#15 0x5624e8cba3ce in aio_ctx_dispatch /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/async.c:360:5
qemu#16 0x7fb199ae0d3a in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
qemu#17 0x7fb199ae0d3a in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
qemu#18 0x5624e8cbe1d9 in glib_pollfds_poll /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:287:9
qemu#19 0x5624e8cbcb13 in os_host_main_loop_wait /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:310:5
qemu#20 0x5624e8cbc6dc in main_loop_wait /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../util/main-loop.c:589:11
qemu#21 0x5624e6f3f917 in qemu_main_loop /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/runstate.c:801:9
qemu#22 0x5624e893379c in qemu_default_main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/main.c:37:14
qemu#23 0x5624e89337e7 in main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../system/main.c:48:12
qemu#24 0x7fb197972d8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
qemu#25 0x7fb197972e3f in __libc_start_main csu/../csu/libc-start.c:392:3
qemu#26 0x5624e5c16fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: a9e623fa1009a9435c0142c037cd7b8c1ad04ce3)
SUMMARY: AddressSanitizer: 5 byte(s) leaked in 1 allocation(s).
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240819145021.38524-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
In multifd_recv_setup() we allocate (among other things)
* a MultiFDRecvData struct to multifd_recv_state::data
* a MultiFDRecvData struct to each multfd_recv_state->params[i].data
(Then during execution we might swap these pointers around.)
But in multifd_recv_cleanup() we free multifd_recv_state->data
in multifd_recv_cleanup_state() but we don't ever free the
multifd_recv_state->params[i].data. This results in a memory
leak reported by LeakSanitizer:
(cd build/asan && \
ASAN_OPTIONS="fast_unwind_on_malloc=0:strip_path_prefix=/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../" \
QTEST_QEMU_BINARY=./qemu-system-x86_64 \
./tests/qtest/migration-test --tap -k -p /x86_64/migration/multifd/file/mapped-ram )
[...]
Direct leak of 72 byte(s) in 3 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9c83c in multifd_recv_setup migration/multifd.c:1606:19
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
qemu#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
qemu#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
qemu#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
qemu#14 0x561cc3796c67 in main system/main.c:48:12
qemu#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
qemu#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
qemu#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9bed9 in multifd_recv_setup migration/multifd.c:1588:32
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
qemu#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
qemu#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
qemu#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
qemu#14 0x561cc3796c67 in main system/main.c:48:12
qemu#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
qemu#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
qemu#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
SUMMARY: AddressSanitizer: 96 byte(s) leaked in 4 allocation(s).
Free the params[i].data too.
Cc: qemu-stable@nongnu.org
Fixes: d117ed0 ("migration/multifd: Allow receiving pages without packets")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
…et_end()
In multifd_mapped_ram_fdset_end() we call qtest_qmp() but forgot
to unref the response QDict we get back, which means it is leaked:
Indirect leak of 4120 byte(s) in 1 object(s) allocated from:
#0 0x55c0c095d318 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f318) (BuildI
d: 07f667506452d6c467dbc06fd95191966d3e91b4)
#1 0x7f186f939c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55c0c0ae9b01 in qdict_new qobject/qdict.c:30:13
#3 0x55c0c0afc16c in parse_object qobject/json-parser.c:317:12
#4 0x55c0c0afb90f in parse_value qobject/json-parser.c:545:16
#5 0x55c0c0afb579 in json_parser_parse qobject/json-parser.c:579:14
#6 0x55c0c0afa21d in json_message_process_token qobject/json-streamer.c:92:12
#7 0x55c0c0bca2e5 in json_lexer_feed_char qobject/json-lexer.c:313:13
#8 0x55c0c0bc97ce in json_lexer_feed qobject/json-lexer.c:350:9
#9 0x55c0c0afabbc in json_message_parser_feed qobject/json-streamer.c:121:5
#10 0x55c0c09cbd52 in qmp_fd_receive tests/qtest/libqmp.c:86:9
qemu#11 0x55c0c09be69b in qtest_qmp_receive_dict tests/qtest/libqtest.c:760:12
qemu#12 0x55c0c09bca77 in qtest_qmp_receive tests/qtest/libqtest.c:741:27
qemu#13 0x55c0c09bee9d in qtest_vqmp tests/qtest/libqtest.c:812:12
qemu#14 0x55c0c09bd257 in qtest_qmp tests/qtest/libqtest.c:835:16
qemu#15 0x55c0c0a87747 in multifd_mapped_ram_fdset_end tests/qtest/migration-test.c:2393:12
qemu#16 0x55c0c0a85eb3 in test_file_common tests/qtest/migration-test.c:1978:9
qemu#17 0x55c0c0a746a3 in test_multifd_file_mapped_ram_fdset tests/qtest/migration-test.c:2437:5
qemu#18 0x55c0c0a93237 in migration_test_wrapper tests/qtest/migration-helpers.c:458:5
qemu#19 0x7f186f958aed in test_case_run debian/build/deb/../../../glib/gtestutils.c:2930:15
qemu#20 0x7f186f958aed in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3018:16
qemu#21 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
qemu#22 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
qemu#23 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
qemu#24 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
qemu#25 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
qemu#26 0x7f186f958faa in g_test_run_suite debian/build/deb/../../../glib/gtestutils.c:3109:18
qemu#27 0x7f186f959055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2231:7
qemu#28 0x7f186f959055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2218:1
qemu#29 0x55c0c0a6e427 in main tests/qtest/migration-test.c:4033:11
Unref the object after we've confirmed that it is what we expect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
In migrate_get_socket_address() we leak the SocketAddressList:
(cd build/asan && \
ASAN_OPTIONS="fast_unwind_on_malloc=0:strip_path_prefix=/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../"
QTEST_QEMU_BINARY=./qemu-system-x86_64 \
./tests/qtest/migration-test --tap -k -p /x86_64/migration/multifd/tcp/tls/psk/match )
[...]
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x563d7f22f318 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f318) (BuildId: 2ad6282fb5d076c863ab87f41a345d46dc965ded)
#1 0x7f9de3b39c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x563d7f3a119c in qobject_input_start_list qapi/qobject-input-visitor.c:336:17
#3 0x563d7f390fbf in visit_start_list qapi/qapi-visit-core.c:80:10
#4 0x563d7f3882ef in visit_type_SocketAddressList /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qapi/qapi-visit-sockets.c:519:10
#5 0x563d7f3658c9 in migrate_get_socket_address tests/qtest/migration-helpers.c:97:5
#6 0x563d7f362e24 in migrate_get_connect_uri tests/qtest/migration-helpers.c:111:13
#7 0x563d7f362bb2 in migrate_qmp tests/qtest/migration-helpers.c:222:23
#8 0x563d7f3533cd in test_precopy_common tests/qtest/migration-test.c:1817:5
#9 0x563d7f34dc1c in test_multifd_tcp_tls_psk_match tests/qtest/migration-test.c:3185:5
#10 0x563d7f365337 in migration_test_wrapper tests/qtest/migration-helpers.c:458:5
The code fishes out the SocketAddress from the list to return it, and the
callers are freeing that, but nothing frees the list.
Since this function is called in only two places, the simple fix is to
make it return the SocketAddressList rather than just a SocketAddress,
and then the callers can easily access the SocketAddress, and free
the whole SocketAddressList when they're done.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
In the migration test we create several TLS certificates with
the TLS_* macros from crypto-tls-x509-helpers.h. These macros
create both a QCryptoTLSCertReq object which must be deinitialized
and also an on-disk certificate file. The migration test currently
removes the on-disk file in test_migrate_tls_x509_finish() but
never deinitializes the QCryptoTLSCertReq, which means that memory
allocated as part of it is leaked:
Indirect leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x5558ba33712e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f12e) (BuildId: 4c8618f663e538538cad19d35233124cea161491)
#1 0x7f64afc131f4 (/lib/x86_64-linux-gnu/libtasn1.so.6+0x81f4) (BuildId: 2fde6ecb43c586fe4077118f771077aa1298e7ea)
#2 0x7f64afc18d58 in asn1_write_value (/lib/x86_64-linux-gnu/libtasn1.so.6+0xdd58) (BuildId: 2fde6ecb43c586fe4077118f771077aa1298e7ea)
#3 0x7f64af8fc678 in gnutls_x509_crt_set_version (/lib/x86_64-linux-gnu/libgnutls.so.30+0xe7678) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#4 0x5558ba470035 in test_tls_generate_cert tests/unit/crypto-tls-x509-helpers.c:234:5
#5 0x5558ba464e4a in test_migrate_tls_x509_start_common tests/qtest/migration-test.c:1058:5
#6 0x5558ba462c8a in test_migrate_tls_x509_start_default_host tests/qtest/migration-test.c:1123:12
#7 0x5558ba45ab40 in test_precopy_common tests/qtest/migration-test.c:1786:21
#8 0x5558ba450015 in test_precopy_unix_tls_x509_default_host tests/qtest/migration-test.c:2077:5
#9 0x5558ba46d3c7 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
(and similar reports).
The only function currently provided to deinit a QCryptoTLSCertReq is
test_tls_discard_cert(), which also removes the on-disk certificate
file. For the migration tests we need to retain the on-disk files
until we've finished running the test, so the simplest fix is to
provide a new function test_tls_deinit_cert() which does only the
cleanup of the QCryptoTLSCertReq, and call it in the right places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
We create a gnutls_x509_privkey_t in test_tls_init(), but forget
to deinit it in test_tls_cleanup(), resulting in leaks
reported in hte migration test such as:
Indirect leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x55fa6d11c12e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f12e) (BuildId: 852a267993587f557f50e5715f352f43720077ba)
#1 0x7f073982685d in __gmp_default_allocate (/lib/x86_64-linux-gnu/libgmp.so.10+0xa85d) (BuildId: f110719303ddbea25a5e89ff730fec520eed67b0)
#2 0x7f0739836193 in __gmpz_realloc (/lib/x86_64-linux-gnu/libgmp.so.10+0x1a193) (BuildId: f110719303ddbea25a5e89ff730fec520eed67b0)
#3 0x7f0739836594 in __gmpz_import (/lib/x86_64-linux-gnu/libgmp.so.10+0x1a594) (BuildId: f110719303ddbea25a5e89ff730fec520eed67b0)
#4 0x7f07398a91ed in nettle_mpz_set_str_256_u (/lib/x86_64-linux-gnu/libhogweed.so.6+0xb1ed) (BuildId: 3cc4a3474de72db89e9dcc93bfb95fe377f48c37)
#5 0x7f073a146a5a (/lib/x86_64-linux-gnu/libgnutls.so.30+0x131a5a) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#6 0x7f073a07192c (/lib/x86_64-linux-gnu/libgnutls.so.30+0x5c92c) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#7 0x7f073a078333 (/lib/x86_64-linux-gnu/libgnutls.so.30+0x63333) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#8 0x7f073a0e8353 (/lib/x86_64-linux-gnu/libgnutls.so.30+0xd3353) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#9 0x7f073a0ef0ac in gnutls_x509_privkey_import (/lib/x86_64-linux-gnu/libgnutls.so.30+0xda0ac) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#10 0x55fa6d2547e3 in test_tls_load_key tests/unit/crypto-tls-x509-helpers.c:99:11
qemu#11 0x55fa6d25460c in test_tls_init tests/unit/crypto-tls-x509-helpers.c:128:15
qemu#12 0x55fa6d2495c4 in test_migrate_tls_x509_start_common tests/qtest/migration-test.c:1044:5
qemu#13 0x55fa6d24c23a in test_migrate_tls_x509_start_reject_anon_client tests/qtest/migration-test.c:1216:12
qemu#14 0x55fa6d23fb40 in test_precopy_common tests/qtest/migration-test.c:1789:21
qemu#15 0x55fa6d236b7c in test_precopy_tcp_tls_x509_reject_anon_client tests/qtest/migration-test.c:2614:5
(Oddly, there is no reported leak in the x509 unit tests, even though
those also use test_tls_init() and test_tls_cleanup().)
Deinit the privkey in test_tls_cleanup().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
In migrate_set_ports() we call qdict_put_str() with a value string
which we g_strdup(). However qdict_put_str() takes a copy of the
value string, it doesn't take ownership of it, so the g_strdup()
only results in a leak:
Direct leak of 6 byte(s) in 1 object(s) allocated from:
#0 0x56298023713e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f13e) (BuildId: b2b9174a5a54707a7f76bca51cdc95d2aa08bac1)
#1 0x7fba0ad39738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7fba0ad4e583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x56298036b16e in migrate_set_ports tests/qtest/migration-helpers.c:145:49
#4 0x56298036ad1c in migrate_qmp tests/qtest/migration-helpers.c:228:9
#5 0x56298035b3dd in test_precopy_common tests/qtest/migration-test.c:1820:5
#6 0x5629803549dc in test_multifd_tcp_channels_none tests/qtest/migration-test.c:3077:5
#7 0x56298036d427 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
Drop the unnecessary g_strdup() call.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
…_cancel()
In test_multifd_tcp_cancel() we create three QEMU processes: 'from',
'to' and 'to2'. We clean up (via qtest_quit()) 'from' and 'to2' when
we call test_migrate_end(), but never clean up 'to', which results in
this leak:
Direct leak of 336 byte(s) in 1 object(s) allocated from:
#0 0x55e984fcd328 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f328) (BuildId: 710d409b68bb04427009e9ca6e1b63ff8af785d3)
#1 0x7f0878b39c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55e98503a172 in qtest_spawn_qemu tests/qtest/libqtest.c:397:21
#3 0x55e98502bc4a in qtest_init_internal tests/qtest/libqtest.c:471:9
#4 0x55e98502c5b7 in qtest_init_with_env tests/qtest/libqtest.c:533:21
#5 0x55e9850eef0f in test_migrate_start tests/qtest/migration-test.c:857:11
#6 0x55e9850eb01d in test_multifd_tcp_cancel tests/qtest/migration-test.c:3297:9
#7 0x55e985103407 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
Call qtest_quit() on 'to' to clean it up once it has exited.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
Since the TYPE_XNLX_VERSAL_CFU_FDRO device creates a FIFO in its
instance_init method, we must destroy the FIFO in instance_finalize
to avoid a memory leak for the QOM introspection
"instantiate-examine-finalize" cycle:
Direct leak of 8192 byte(s) in 1 object(s) allocated from:
#0 0x55ec89eae7ee in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d7ee) (BuildId: 6d508874816cc47d17c8dd775e8f809ae520e8cb)
#1 0x7f697018f738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x55ec8d98d98d in fifo8_create util/fifo8.c:27:18
#3 0x55ec8aa2a624 in fifo32_create /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/fifo32.h:35:5
#4 0x55ec8aa2a33c in cfu_fdro_init hw/misc/xlnx-versal-cfu.c:397:5
#5 0x55ec8ce75da1 in object_init_with_type qom/object.c:420:9
#6 0x55ec8ce5d07b in object_initialize_with_type qom/object.c:562:5
#7 0x55ec8ce5e91d in object_new_with_type qom/object.c:782:5
#8 0x55ec8ce5e9f1 in object_new qom/object.c:797:12
#9 0x55ec8d65c81d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-2-peter.maydell@linaro.org
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
The TYPE_XLNX_VERSAL_TRNG device creates s->prng with g_rand_new()
in its init method, but it frees it in its unrealize method. This
results in a leak in the QOM introspection "initialize-inspect-finalize"
lifecycle:
Direct leak of 2500 byte(s) in 1 object(s) allocated from:
#0 0x55ec89eae9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 6d5
08874816cc47d17c8dd775e8f809ae520e8cb)
#1 0x7f697018fc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x7f6970197738 in g_rand_new_with_seed_array debian/build/deb/../../../glib/grand.c:202:17
#3 0x7f6970197816 in g_rand_new debian/build/deb/../../../glib/grand.c:286:10
#4 0x55ec8aa3656a in trng_init hw/misc/xlnx-versal-trng.c:624:15
#5 0x55ec8ce75da1 in object_init_with_type qom/object.c:420:9
#6 0x55ec8ce5d07b in object_initialize_with_type qom/object.c:562:5
#7 0x55ec8ce5e91d in object_new_with_type qom/object.c:782:5
#8 0x55ec8ce5e9f1 in object_new qom/object.c:797:12
#9 0x55ec8d65c81d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Move the free to finalize so it matches where we are initing
s->prng. Since that's the only thing our unrealize method was
doing, this essentially switches the whole function to be
a finalize implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-3-peter.maydell@linaro.org
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
The TYPE_XLNX_BBRAM device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x5641518ca9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 4a6
18cb63d57d5a19ed45cfc262b08da47eaafe5)
#1 0x7ff1aab31c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x564151cffc5d in register_init_block hw/core/register.c:248:34
#3 0x564151d006be in register_init_block32 hw/core/register.c:299:12
#4 0x56415293df75 in bbram_ctrl_init hw/nvram/xlnx-bbram.c:462:9
#5 0x564154891dc1 in object_init_with_type qom/object.c:420:9
#6 0x56415487909b in object_initialize_with_type qom/object.c:562:5
#7 0x56415487a93d in object_new_with_type qom/object.c:782:5
#8 0x56415487aa11 in object_new qom/object.c:797:12
#9 0x56415507883d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-4-peter.maydell@linaro.org
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
The TYPE_XLNX_ZYNQMP_EFUSE device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f3ff5839d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 23cf931c66865a71b6cc4da95156d03bc106fa72)
#1 0x7f3f31c6bc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f3ff9b8c5d in register_init_block hw/core/register.c:248:34
#3 0x55f3ff9b96be in register_init_block32 hw/core/register.c:299:12
#4 0x55f4005e5b25 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f40254afb1 in object_init_with_type qom/object.c:420:9
#6 0x55f40253228b in object_initialize_with_type qom/object.c:562:5
#7 0x55f402533b2d in object_new_with_type qom/object.c:782:5
#8 0x55f402533c01 in object_new qom/object.c:797:12
#9 0x55f402d31a2d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-5-peter.maydell@linaro.org
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
The TYPE_XLNX_VERSAL_TRNG device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55842ec799d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 47496e53f3e779f1c7e9b82cbea07407152b498b)
#1 0x7fe793c75c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55842f0aec5d in register_init_block hw/core/register.c:248:34
#3 0x55842f0af6be in register_init_block32 hw/core/register.c:299:12
#4 0x55842f801588 in trng_init hw/misc/xlnx-versal-trng.c:614:9
#5 0x558431c411a1 in object_init_with_type qom/object.c:420:9
#6 0x558431c2847b in object_initialize_with_type qom/object.c:562:5
#7 0x558431c29d1d in object_new_with_type qom/object.c:782:5
#8 0x558431c29df1 in object_new qom/object.c:797:12
#9 0x558432427c1d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-6-peter.maydell@linaro.org
stweil
pushed a commit
that referenced
this issue
Sep 9, 2024
The TYPE_XLNX_VERSAL_EFUSE_CTRL device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f222b5b9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 420
43d49e1139e3f3071b1f22fac1e3e7249c9a6)
#1 0x7fbb10669c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f222f90c5d in register_init_block hw/core/register.c:248:34
#3 0x55f222f916be in register_init_block32 hw/core/register.c:299:12
#4 0x55f223bbdd15 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f225b23391 in object_init_with_type qom/object.c:420:9
#6 0x55f225b0a66b in object_initialize_with_type qom/object.c:562:5
#7 0x55f225b0bf0d in object_new_with_type qom/object.c:782:5
#8 0x55f225b0bfe1 in object_new qom/object.c:797:12
#9 0x55f226309e0d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-7-peter.maydell@linaro.org
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
@stweil
Could be possible to improve NSIS installer script
To show on main instalelr window on top left program version and platform (32bit or 64bit)
To setup in File Properties Appname/File Version/Product Name/Version/Copyright
To setup correctly in Windows Program Add/Remove list the right icon and product name as Product name + plaform (ex. QEMU (64bit)"?
Thanks.
The text was updated successfully, but these errors were encountered: