forked from prusa3d/PrusaSlicer
-
-
Notifications
You must be signed in to change notification settings - Fork 519
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
allow all vector types in text field (';' separated, to avoid problem with ',' vs '.' locales)
Change `post_process` to use the new way (no "serialized" needed anymore)
Remove "one_string" gui type, as it's now a supported as vector with no id.
Need to set all filament-setting id to 0, as the gui need them to update the first elt only (and always that one)
for field <-> config pipe:
- config now have get_any(id) and set_any(any, id). No need to special optiongroup or gui method.
- any will carry a type that is in sync with the config type and the id.
- if id is set or type is scalar, the any is scalara. else the any is a vector of scalar.
- fields are responsible to cast the any correctly and to set it correctly. no more mess of wxstring & double- Loading branch information
1 parent
171a915
commit de70415
Showing
48 changed files
with
1,341 additions
and
1,124 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -1,118 +1,118 @@ | ||
|
|
||
| #note: all settings are id$0 as the slicer consider there is only one value in the arrays in the gui. | ||
| page:Filament:spool | ||
| group:filament_spool_weight_event:Filament | ||
| setting:filament_colour | ||
| setting:filament_diameter | ||
| setting:extrusion_multiplier | ||
| setting:filament_density | ||
| setting:filament_cost | ||
| setting:filament_spool_weight | ||
| setting:id$0:filament_colour | ||
| setting:id$0:filament_diameter | ||
| setting:id$0:extrusion_multiplier | ||
| setting:id$0:filament_density | ||
| setting:id$0:filament_cost | ||
| setting:id$0:filament_spool_weight | ||
| group:Temperature °C | ||
| line:Extruder | ||
| setting:first_layer_temperature | ||
| setting:temperature | ||
| setting:id$0:first_layer_temperature | ||
| setting:id$0:temperature | ||
| end_line | ||
| line:Bed | ||
| setting:first_layer_bed_temperature | ||
| setting:label:Other layers:bed_temperature | ||
| setting:id$0:first_layer_bed_temperature | ||
| setting:id$0:label:Other layers:bed_temperature | ||
| end_line | ||
| setting:chamber_temperature | ||
| setting:id$0:chamber_temperature | ||
| group:Filament properties | ||
| setting:width$7:filament_type | ||
| setting:filament_soluble | ||
| setting:filament_shrink | ||
| setting:filament_max_overlap | ||
| setting:id$0:width$7:filament_type | ||
| setting:id$0:filament_soluble | ||
| setting:id$0:filament_shrink | ||
| setting:id$0:filament_max_overlap | ||
| group:Print speed override | ||
| setting:filament_max_speed | ||
| setting:filament_max_volumetric_speed | ||
| setting:id$0:filament_max_speed | ||
| setting:id$0:filament_max_volumetric_speed | ||
| volumetric_speed_description | ||
|
|
||
| page:Cooling:time | ||
| group:Fan speed - default | ||
| setting:label$Run the fan at default speed when possible:fan_always_on | ||
| setting:id$0:label$Run the fan at default speed when possible:fan_always_on | ||
| line:Disable fan for the first | ||
| setting:width$5:label$_:sidetext_width$7:disable_fan_first_layers | ||
| setting:width$5:label_width$12:full_fan_speed_layer | ||
| setting:id$0:width$5:label$_:sidetext_width$7:disable_fan_first_layers | ||
| setting:id$0:width$5:label_width$12:full_fan_speed_layer | ||
| end_line | ||
| setting:min_fan_speed | ||
| setting:id$0:min_fan_speed | ||
| line:Perimeter fan speed | ||
| setting:label_width$12:label$Internal:perimeter_fan_speed | ||
| setting:label_width$12:label$External:external_perimeter_fan_speed | ||
| setting:id$0:label_width$12:label$Internal:perimeter_fan_speed | ||
| setting:id$0:label_width$12:label$External:external_perimeter_fan_speed | ||
| line:Internal Infill fan speed | ||
| setting:label_width$12:label$Sparse:infill_fan_speed | ||
| setting:id$0:label_width$12:label$Sparse:infill_fan_speed | ||
| line:Solid Infill fan speed | ||
| setting:label_width$12:label$Solid:solid_infill_fan_speed | ||
| setting:label_width$12:label$Top solid:top_fan_speed | ||
| setting:id$0:label_width$12:label$Solid:solid_infill_fan_speed | ||
| setting:id$0:label_width$12:label$Top solid:top_fan_speed | ||
| line:Support Material fan speed | ||
| setting:label_width$12:label$Default:support_material_fan_speed | ||
| setting:label_width$12:label$Interface:support_material_interface_fan_speed | ||
| setting:id$0:label_width$12:label$Default:support_material_fan_speed | ||
| setting:id$0:label_width$12:label$Interface:support_material_interface_fan_speed | ||
| line:Bridges fan speed | ||
| setting:label_width$12:label$Bridges:bridge_fan_speed | ||
| setting:label_width$12:label$Internal bridges:bridge_internal_fan_speed | ||
| setting:id$0:label_width$12:label$Bridges:bridge_fan_speed | ||
| setting:id$0:label_width$12:label$Internal bridges:bridge_internal_fan_speed | ||
| line:Overhangs Perimeter fan speed | ||
| setting:label_width$12:label$Overhangs:overhangs_fan_speed | ||
| setting:id$0:label_width$12:label$Overhangs:overhangs_fan_speed | ||
| line:Gap fill fan speed | ||
| setting:label_width$12:label$Gap fill:gap_fill_fan_speed | ||
| setting:id$0:label_width$12:label$Gap fill:gap_fill_fan_speed | ||
| group:Short layer time - began to increase base fan speed | ||
| setting:fan_below_layer_time | ||
| setting:label$Max fan speed:max_fan_speed | ||
| setting:id$0:fan_below_layer_time | ||
| setting:id$0:label$Max fan speed:max_fan_speed | ||
| group:Very short layer time - began to decrease extrusion rate | ||
| setting:label$Layer time goal:slowdown_below_layer_time | ||
| setting:width$4:max_speed_reduction | ||
| setting:width$4:min_print_speed | ||
| setting:id$0:label$Layer time goal:slowdown_below_layer_time | ||
| setting:id$0:width$4:max_speed_reduction | ||
| setting:id$0:width$4:min_print_speed | ||
| group:Behavior | ||
| cooling_description | ||
|
|
||
| page:Multimaterial:funnel | ||
| group:Multimaterial toolchange temperature | ||
| setting:filament_enable_toolchange_temp | ||
| setting:filament_toolchange_temp | ||
| setting:filament_use_fast_skinnydip | ||
| setting:filament_enable_toolchange_part_fan | ||
| setting:filament_toolchange_part_fan_speed | ||
| setting:id$0:filament_enable_toolchange_temp | ||
| setting:id$0:filament_toolchange_temp | ||
| setting:id$0:filament_use_fast_skinnydip | ||
| setting:id$0:filament_enable_toolchange_part_fan | ||
| setting:id$0:filament_toolchange_part_fan_speed | ||
| group:Multimaterial toolchange string reduction | ||
| setting:filament_use_skinnydip | ||
| setting:filament_skinnydip_distance | ||
| setting:filament_melt_zone_pause | ||
| setting:filament_cooling_zone_pause | ||
| setting:filament_dip_insertion_speed | ||
| setting:filament_dip_extraction_speed | ||
| setting:id$0:filament_use_skinnydip | ||
| setting:id$0:filament_skinnydip_distance | ||
| setting:id$0:filament_melt_zone_pause | ||
| setting:id$0:filament_cooling_zone_pause | ||
| setting:id$0:filament_dip_insertion_speed | ||
| setting:id$0:filament_dip_extraction_speed | ||
| group:Wipe tower parameters | ||
| setting:filament_minimal_purge_on_wipe_tower | ||
| setting:filament_max_wipe_tower_speed | ||
| setting:id$0:filament_minimal_purge_on_wipe_tower | ||
| setting:id$0:filament_max_wipe_tower_speed | ||
| group:Toolchange parameters with single extruder MM printers | ||
| setting:filament_loading_speed_start | ||
| setting:filament_loading_speed | ||
| setting:filament_unloading_speed_start | ||
| setting:filament_unloading_speed | ||
| setting:filament_load_time | ||
| setting:filament_unload_time | ||
| setting:filament_toolchange_delay | ||
| setting:filament_cooling_moves | ||
| setting:filament_cooling_initial_speed | ||
| setting:filament_cooling_final_speed | ||
| setting:filament_wipe_advanced_pigment | ||
| setting:id$0:filament_loading_speed_start | ||
| setting:id$0:filament_loading_speed | ||
| setting:id$0:filament_unloading_speed_start | ||
| setting:id$0:filament_unloading_speed | ||
| setting:id$0:filament_load_time | ||
| setting:id$0:filament_unload_time | ||
| setting:id$0:filament_toolchange_delay | ||
| setting:id$0:filament_cooling_moves | ||
| setting:id$0:filament_cooling_initial_speed | ||
| setting:id$0:filament_cooling_final_speed | ||
| setting:id$0:filament_wipe_advanced_pigment | ||
| filament_ramming_parameters | ||
|
|
||
|
|
||
| filament_overrides_page | ||
|
|
||
| page:Custom G-code:cog | ||
| group:no_title:validate_gcode:Start G-code | ||
| setting:full_width:height$35:start_filament_gcode | ||
| setting:id$0:full_width:height$35:start_filament_gcode | ||
| group:no_title:validate_gcode:End G-code | ||
| setting:full_width:height$35:end_filament_gcode | ||
| setting:id$0:full_width:height$35:end_filament_gcode | ||
|
|
||
| page:Notes:note.png | ||
| group:label_width$0:Notes | ||
| setting:full_width:height$25:filament_notes | ||
| setting:id$0:full_width:height$25:filament_notes | ||
| group:label_width$0:Custom variables | ||
| setting:full_width:height$15:filament_custom_variables | ||
| setting:id$0:full_width:height$15:filament_custom_variables | ||
|
|
||
| page:Dependencies:wrench.png | ||
| group:Profile dependencies | ||
| setting:compatible_printers | ||
| setting:full_width:color:compatible_printers_condition | ||
| setting:compatible_prints | ||
| setting:full_width:color:compatible_prints_condition | ||
| setting:id$0:compatible_printers | ||
| setting:id$0:full_width:color:compatible_printers_condition | ||
| setting:id$0:compatible_prints | ||
| setting:id$0:full_width:color:compatible_prints_condition | ||
| parent_preset_description |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -1,118 +1,118 @@ | ||
|
|
||
| page:Filament:spool | ||
| group:filament_spool_weight_event:Filament | ||
| setting:filament_colour | ||
| setting:filament_diameter | ||
| setting:extrusion_multiplier | ||
| setting:filament_density | ||
| setting:filament_cost | ||
| setting:filament_spool_weight | ||
| setting:id$0:filament_colour | ||
| setting:id$0:filament_diameter | ||
| setting:id$0:extrusion_multiplier | ||
| setting:id$0:filament_density | ||
| setting:id$0:filament_cost | ||
| setting:id$0:filament_spool_weight | ||
| group:Temperature °C | ||
| line:Extruder | ||
| setting:first_layer_temperature | ||
| setting:temperature | ||
| setting:id$0:first_layer_temperature | ||
| setting:id$0:temperature | ||
| end_line | ||
| line:Bed | ||
| setting:first_layer_bed_temperature | ||
| setting:label:Other layers:bed_temperature | ||
| setting:id$0:first_layer_bed_temperature | ||
| setting:id$0:label:Other layers:bed_temperature | ||
| end_line | ||
| setting:chamber_temperature | ||
| setting:id$0:chamber_temperature | ||
| group:Filament properties | ||
| setting:width$7:filament_type | ||
| setting:filament_soluble | ||
| setting:filament_shrink | ||
| setting:filament_max_overlap | ||
| setting:id$0:width$7:filament_type | ||
| setting:id$0:filament_soluble | ||
| setting:id$0:filament_shrink | ||
| setting:id$0:filament_max_overlap | ||
| group:Print speed override | ||
| setting:filament_max_speed | ||
| setting:filament_max_volumetric_speed | ||
| setting:id$0:filament_max_speed | ||
| setting:id$0:filament_max_volumetric_speed | ||
| volumetric_speed_description | ||
|
|
||
| page:Cooling:time | ||
| group:Fan speed - default | ||
| setting:label$Run the fan at default speed when possible:fan_always_on | ||
| setting:id$0:label$Run the fan at default speed when possible:fan_always_on | ||
| line:Disable fan for the first | ||
| setting:width$5:label$_:sidetext_width$7:disable_fan_first_layers | ||
| setting:width$5:label_width$12:full_fan_speed_layer | ||
| setting:id$0:width$5:label$_:sidetext_width$7:disable_fan_first_layers | ||
| setting:id$0:width$5:label_width$12:full_fan_speed_layer | ||
| end_line | ||
| setting:min_fan_speed | ||
| setting:id$0:min_fan_speed | ||
| line:Perimeter fan speed | ||
| setting:label_width$12:label$Internal:perimeter_fan_speed | ||
| setting:label_width$12:label$External:external_perimeter_fan_speed | ||
| setting:id$0:label_width$12:label$Internal:perimeter_fan_speed | ||
| setting:id$0:label_width$12:label$External:external_perimeter_fan_speed | ||
| line:Internal Infill fan speed | ||
| setting:label_width$12:label$Sparse:infill_fan_speed | ||
| setting:id$0:label_width$12:label$Sparse:infill_fan_speed | ||
| line:Solid Infill fan speed | ||
| setting:label_width$12:label$Solid:solid_infill_fan_speed | ||
| setting:label_width$12:label$Top solid:top_fan_speed | ||
| setting:id$0:label_width$12:label$Solid:solid_infill_fan_speed | ||
| setting:id$0:label_width$12:label$Top solid:top_fan_speed | ||
| line:Support Material fan speed | ||
| setting:label_width$12:label$Default:support_material_fan_speed | ||
| setting:label_width$12:label$Interface:support_material_interface_fan_speed | ||
| setting:id$0:label_width$12:label$Default:support_material_fan_speed | ||
| setting:id$0:label_width$12:label$Interface:support_material_interface_fan_speed | ||
| line:Bridges fan speed | ||
| setting:label_width$12:label$Bridges:bridge_fan_speed | ||
| setting:label_width$12:label$Internal bridges:bridge_internal_fan_speed | ||
| setting:id$0:label_width$12:label$Bridges:bridge_fan_speed | ||
| setting:id$0:label_width$12:label$Internal bridges:bridge_internal_fan_speed | ||
| line:Overhangs Perimeter fan speed | ||
| setting:label_width$12:label$Overhangs:overhangs_fan_speed | ||
| setting:id$0:label_width$12:label$Overhangs:overhangs_fan_speed | ||
| line:Gap fill fan speed | ||
| setting:label_width$12:label$Gap fill:gap_fill_fan_speed | ||
| setting:id$0:label_width$12:label$Gap fill:gap_fill_fan_speed | ||
| group:Short layer time - began to increase base fan speed | ||
| setting:fan_below_layer_time | ||
| setting:label$Max fan speed:max_fan_speed | ||
| setting:id$0:fan_below_layer_time | ||
| setting:id$0:label$Max fan speed:max_fan_speed | ||
| group:Very short layer time - began to decrease extrusion rate | ||
| setting:label$Layer time goal:slowdown_below_layer_time | ||
| setting:width$4:max_speed_reduction | ||
| setting:width$4:min_print_speed | ||
| setting:id$0:label$Layer time goal:slowdown_below_layer_time | ||
| setting:id$0:width$4:max_speed_reduction | ||
| setting:id$0:width$4:min_print_speed | ||
| group:Behavior | ||
| cooling_description | ||
|
|
||
| page:Multimaterial:funnel | ||
| group:Multimaterial toolchange temperature | ||
| setting:filament_enable_toolchange_temp | ||
| setting:filament_toolchange_temp | ||
| setting:filament_use_fast_skinnydip | ||
| setting:filament_enable_toolchange_part_fan | ||
| setting:filament_toolchange_part_fan_speed | ||
| setting:id$0:filament_enable_toolchange_temp | ||
| setting:id$0:filament_toolchange_temp | ||
| setting:id$0:filament_use_fast_skinnydip | ||
| setting:id$0:filament_enable_toolchange_part_fan | ||
| setting:id$0:filament_toolchange_part_fan_speed | ||
| group:Multimaterial toolchange string reduction | ||
| setting:filament_use_skinnydip | ||
| setting:filament_skinnydip_distance | ||
| setting:filament_melt_zone_pause | ||
| setting:filament_cooling_zone_pause | ||
| setting:filament_dip_insertion_speed | ||
| setting:filament_dip_extraction_speed | ||
| setting:id$0:filament_use_skinnydip | ||
| setting:id$0:filament_skinnydip_distance | ||
| setting:id$0:filament_melt_zone_pause | ||
| setting:id$0:filament_cooling_zone_pause | ||
| setting:id$0:filament_dip_insertion_speed | ||
| setting:id$0:filament_dip_extraction_speed | ||
| group:Wipe tower parameters | ||
| setting:filament_minimal_purge_on_wipe_tower | ||
| setting:filament_max_wipe_tower_speed | ||
| setting:id$0:filament_minimal_purge_on_wipe_tower | ||
| setting:id$0:filament_max_wipe_tower_speed | ||
| group:Toolchange parameters with single extruder MM printers | ||
| setting:filament_loading_speed_start | ||
| setting:filament_loading_speed | ||
| setting:filament_unloading_speed_start | ||
| setting:filament_unloading_speed | ||
| setting:filament_load_time | ||
| setting:filament_unload_time | ||
| setting:filament_toolchange_delay | ||
| setting:filament_cooling_moves | ||
| setting:filament_cooling_initial_speed | ||
| setting:filament_cooling_final_speed | ||
| setting:filament_wipe_advanced_pigment | ||
| setting:id$0:filament_loading_speed_start | ||
| setting:id$0:filament_loading_speed | ||
| setting:id$0:filament_unloading_speed_start | ||
| setting:id$0:filament_unloading_speed | ||
| setting:id$0:filament_load_time | ||
| setting:id$0:filament_unload_time | ||
| setting:id$0:filament_toolchange_delay | ||
| setting:id$0:filament_cooling_moves | ||
| setting:id$0:filament_cooling_initial_speed | ||
| setting:id$0:filament_cooling_final_speed | ||
| setting:id$0:filament_wipe_advanced_pigment | ||
| filament_ramming_parameters | ||
|
|
||
|
|
||
| filament_overrides_page | ||
|
|
||
| page:Custom G-code:cog | ||
| group:no_title:validate_gcode:Start G-code | ||
| setting:full_width:height$35:start_filament_gcode | ||
| setting:id$0:full_width:height$35:start_filament_gcode | ||
| group:no_title:validate_gcode:End G-code | ||
| setting:full_width:height$35:end_filament_gcode | ||
| setting:id$0:full_width:height$35:end_filament_gcode | ||
|
|
||
| page:Notes:note.png | ||
| group:label_width$0:Notes | ||
| setting:full_width:height$25:filament_notes | ||
| setting:id$0:full_width:height$25:filament_notes | ||
| group:label_width$0:Custom variables | ||
| setting:full_width:height$15:filament_custom_variables | ||
| setting:id$0:full_width:height$15:filament_custom_variables | ||
|
|
||
| page:Dependencies:wrench.png | ||
| group:Profile dependencies | ||
| setting:compatible_printers | ||
| setting:full_width:color:compatible_printers_condition | ||
| setting:compatible_prints | ||
| setting:full_width:color:compatible_prints_condition | ||
| setting:id$0:compatible_printers | ||
| setting:id$0:full_width:color:compatible_printers_condition | ||
| setting:id$0:compatible_prints | ||
| setting:id$0:full_width:color:compatible_prints_condition | ||
| parent_preset_description |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Oops, something went wrong.