Slicing issue when using modifier for infill

[make92]

Version

2.2.48

Operating system type + version

Windows 10

3D printer brand / version + firmware version (if known)

What 3D printer brand / version are you printing on, is it a stock model or did you modify the printer, what firmware is running on your printer, version of the firmware #s

Behavior

when adding a modifier for the upper part of a model to change the infill to 100% for example
its loosing all perimeter for the part below the modivier.

Project File (.3MF) where problem occurs

[supermerill]

in the meantime, you can add the "perimeter count" in the modifier to make it work.

[make92]

perimeter count

ok will do that, thanks a lot

[liftbag]

I confirm the issue. I cannot try the #201 nightly build on macOS, because the executable is damaged.

[supermerill]

@liftbag Fix should be in the 201 build.
You try to execute the .dmg or from the tar archive?
I don't have a mac so i can't test them. I even don't know how you use them.

[liftbag]

@liftbag Fix should be in the 201 build.
You try to execute the .dmg or from the tar archive?
I don't have a mac so i can't test them. I
even don't know how you use them.

From .dmg. I'll try from the tar archive.

[EDIT]
Even from tar archive the executable is damaged.

[make92]

the latest version fixed the problem for me.
thanks a lot.

[liftbag]

I got to try the release on windows, and I confirm that it works. But the application for macOS, to which the latest release refers, is damaged.

[supermerill]

I understand, but i can't 'repair' it on my own, as i don't know why/what is "damaged".