Releases: supermerill/SuperSlicer
Releases · supermerill/SuperSlicer
1.41.2-2 : christmas edition
new
- concentric infill with gap fill (prusa3d#577, prusa3d#662, prusa3d#1461, slic3r/Slic3r#4629, slic3r/Slic3r#4560)
bugfix
- typos
- some possible crash with thin walls
issue
- skirts are buggy.
Vase mode edition
new
- option to remove the "connecting line" on the infill (allow to do art with no perimeters)
- split "first layer speed" with a new option: "first layer infill speed"
fix
- thin wall / gap fill improvements
- fix #13 (& new option for the old behavior)
issues
- thin walls computation can be stuck (never finish). Corrected at next version.
1.41.1-5 : moar seam options
new:
- "nearest" seam option now really emphasise the proximity
- old seam "nearest" moved to "Hidden" (as it prioritize the best position before going to the nearest)
- new option for seam : Travel move reduced. It modified the cost a bit more. Not sure it has a significant effect.
- looping perimeter: now a position option for the position of "loop switch". Nearest can lead to some undesirable effects combined with "nearest seam", the "rear" (highest y) was added.
- Remove small gaps: when unchecked, it lower drastically the checks for small gaps in geometry, see prusa3d/issues/520
other
- changed some default settings (from selected to not selected)
- some text changes.
known issue
- had a problem with ironing, hotfixed.
- wrong tag.
upstream 1.41.1 merge
merge with slic3rPE 1.41.1
new
- looping perimeters: extrude plastic instead of travel if infill % is 0
bugfix
- bugfix lopping perimeters when merging a very small one
- better spacing of the loop-merging interface
known issue
- had a problem with ironing, hotfixed (current download contains the hotfix)
Perimeter loop edition [beta]
new features
- perimeters can be merged into a continous loop (option in perimeter/advanced tab)
- new option for dense_infill algorithm : auto (no turn into the sparse infill) vs Anchored (use the Bridge anchor parameter to offset the dense layer a bit)
bugfixes
- support generation crash (on big models)
- thin_wall (& gap fill) lines that go to 0,0
September 2018: thin extrusion edition [rc]
changes
- setting to activate "exact object height" if needed (need more testing)
- more thin walls adjustments & tuning
- gap fill setting to let it active when we select a 0% infill
- setting in support tab to allow printing a solid bottom layer
- more common default settings (most new options deactivated by default)
- bugfix for bridge with 0% infill
also changing the name from October to September because i'm dumb.
October 2018 release: thin extrusion edition [beta2]
bugfix
- fix crash when exporting gcode if a 0-length dense layer was created in the slicing.
known issue
- vase mode broken
- auto-adjust last layer height broken.
October 2018: thin extrusion edition [beta]
What's new?
- change dense layer from manually-set to automatic (see wiki)
- greatly improve thin wall option (see wiki)
- add option to grow/shrink holes (in x/y plane)
- debug some sorting issue with supports
- improve the "enforce 100% fill volume" to be more precise, and remove edge cases.
known issue
- can crash when exporting gcode if using dense layer option.
notes
no mac build because i don't have a mac. you have to compile them.
no linux build (yet) because i'm lazy and linux users know how to compile things ;-p
Thus new version hasn't been extensivly tested, you can consider it as a beta.
First release of my fork
It uses the 1.41.0_alpha2 + some commits of the prusa branch as the baseline.
If i forgot to remove some copyright things, let me know.
What's new?
- one perimeter in top surfaces
- Extra perimeter if needed: now add perimeter over overhangs (instead of doing nothing) & change the perimeter direction at each layer to get a better finish.
- much better thin walls
- avoid unsupported perimeter
- ironing
- denser infill below solid surface (kind of automatic infill density)
- Anchor solid infill by Xmm : It was harcoded to 3mm, now you can choose this value.
- infill before: now can be chosen by region (right-clic on an object)
- over-bridge flow ratio: let you fill the gap over the bridged section to have a leveled top layer.
- verbose output: now also write the needed coments for the octoprint CancelObject plugin
- "filament" option in the bottom left combobox in the preview view (a bit like "extruder")
- adjust the last layer(s) height to let the printed be at the exact size (only for the last layer, not all top layers)
- fan speed can be adjusted for the top surfaces
known issue
- seems i broke the support generator. the bugfix is ready for the next release.
notes
no mac build because i don't have a mac. you have to compile them.
no linux build (yet) because i'm lazy and linux users know how to compile things ;-p