NanoVNA-F_Boot

NanoVNA-F 引导程序，简单3步，像 U 盘拷贝文件一样升级固件。 NanoVNA-F BootLoader, STM32F1+SPI FLASH+USB Device Mass Storage for IAP, very simple way to upgrade your app.

如何使用 / How to use

1. 使用 Type-C 将设备连接到 USB，在开机前按下波轮中键，并保持，然后开机。
   液晶屏显示如下提示，代表已经进入Bootloader。
   Connect the device to USB using Type-C, press the pulsator and hold on, then powering up the device.
   The LCD displays the following prompt, indicating that the bootloader has been entered.
   

2. 随后，NanoVNA-F在电脑端显示为一个 U 盘，将新的 update.bin 拷入。
   Then at PC side, device act as a Udisk. Copy you new update.bin into it.
   

3. 设备重新上电，自动运行 APP。
   Re-power the device and run the app automatically.
   

MDK-ARM 工程编译 / Build by MDK-ARM

Created by STM32CubeMX 4.27.0 V1.0

• HAL Lib ：STM32Cube_FW_F1_V1.6.1
• MDK Ver ：uVision V5.23.0.0
• MDK Pack : ARM::CMSIS Ver: 5.2.0(2017-11-16)
• MDK Pack : Keil::STM32F1xx_DFP Ver: 2.3.0(2018-11-05)
• FatFs ：R0.11 (February 09, 2015)
• CHIP STM32F103VET6 FLASH: 512 KB, SRAM: 64 KB
• SPI Flash W25Q128JVSIQTR

HAL Lib Path: C:/Users/S04/STM32Cube/Repository/STM32Cube_FW_F1_V1.6.1

根据实际情况修改库文件路径。
Change the library file path according to the actual situation.

SW4STM32 工程编译 / Build by SW4STM32

待完善 / Coming soon