Cannot set time / clock source

[loopy321]

Thanks for the awesome work!!

The time on dashpanel and automations are off and I cannot figure out how to set it to the correct value.

I have verified that the system running the nodejs-poolcontroller has the correct time. I tried changing the ClockSource in dashpanel, but it remains on "manual" despite trying to change it.

I see in the logs that it changes the value:
0|njsPC | [4/20/2022, 8:37:35 PM] info: [8:37:35 PM] 192.168.2.151 PUT /config/general {"options":{"units":0,"adjustDST":true,"clockMode":12,"clockSource":"server"},"location":{"timeZone":133}}
but when I reload dashpanel it always shows clocksource is "manual" and the time never gets fixed.

Any suggestions on how to fix the clock?

This is nodejspc 7.6.1.

[rstrouse]

What system are you running. Nixie, IntelliTouch, EasyTouch, or IntelliCenter?

[loopy321]

EasyTouch 2 8.

0|njsPC | [4/20/2022, 10:04:06 PM] info: EasyTouch system config complete.
0|njsPC | [4/20/2022, 10:04:06 PM] info: Initializing Nixie Controller
0|njsPC | [4/20/2022, 10:04:06 PM] info: Nixie Controller Initialized

[rstrouse]

There is only a manual setting on EasyTouch but we do a clever thing to set the time when it differs from the os time. The Dallas clock on the OCP has notoriously bad drift. Can I get you to upload a replay that includes changing the clock settings.

[loopy321]

replay_mod.zip

[loopy321]

Rebooted the system and re-did the replay:
replay.2.zip

[rstrouse]

Go ahead and pull njsPC. I do not have an EasyTouch but I suspect I found where it was jumping over that value.

[loopy321]

That seems to have allowed me to set it to server and after some time, the time corrected.

Thank you!