Docker for Himawari-8 decoding, using sam210723/himawari-rx and tcjj3/himawari-rx_auto_scripts.
Here is an example for TBS5520SE:
1. Install:
For the newest systems:
Install driver and "firmware":
[tcjj3@debian]$ sudo apt update
[tcjj3@debian]$ sudo apt install -y wget ca-certificates git patchutils gcc kmod make libproc-processtable-perl libelf-dev
[tcjj3@debian]$ mkdir tbsdriver
[tcjj3@debian]$ cd tbsdriver
[tcjj3@debian]$ wget http://www.tbsdtv.com/download/document/linux/media_build-2021-05-08.tar.bz2
[tcjj3@debian]$ tar jxf media_build-2021-05-08.tar.bz2
[tcjj3@debian]$ cd media_build
[tcjj3@debian]$ sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/media/
[tcjj3@debian]$ sudo ./install.sh
[tcjj3@debian]$ cd ../..
[tcjj3@debian]$ sudo reboot
If install.sh has errors like "ERROR: "__devm_regmap_init_sccb" [/home/tcjj3/tbsdriver_new/media_build/v4l/ov772x.ko] undefined", just use the following commands instead (these commands are from this comment: tbsdtv/linux_media#209 (comment)):
[tcjj3@debian]$ sudo apt update
[tcjj3@debian]$ sudo apt install -y wget ca-certificates git patchutils gcc kmod make libproc-processtable-perl libelf-dev
[tcjj3@debian]$ mkdir tbsdriver
[tcjj3@debian]$ cd tbsdriver
[tcjj3@debian]$ wget http://www.tbsdtv.com/download/document/linux/media_build-2021-05-08.tar.bz2
[tcjj3@debian]$ tar jxf media_build-2021-05-08.tar.bz2
[tcjj3@debian]$ cd media_build
[tcjj3@debian]$ sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/media/
[tcjj3@debian]$ sed -i '/VIDEO_OV772X/d' ./v4l/versions.txt && sed -i '/9.255.255/a VIDEO_OV772X' ./v4l/versions.txt
[tcjj3@debian]$ sed -i -r 's/(^CONFIG.*_RC.*=)./\1n/g' v4l/.config
[tcjj3@debian]$ sudo ./install.sh
[tcjj3@debian]$ cd ../..
[tcjj3@debian]$ sudo reboot
For some old systems:
(1) Install driver:
[tcjj3@debian]$ sudo apt update
[tcjj3@debian]$ sudo apt install -y wget ca-certificates git patchutils gcc kmod make libproc-processtable-perl libelf-dev
[tcjj3@debian]$ mkdir tbsdriver
[tcjj3@debian]$ cd tbsdriver
[tcjj3@debian]$ git clone https://github.com/tbsdtv/media_build.git
[tcjj3@debian]$ git clone --depth=1 https://github.com/tbsdtv/linux_media.git -b latest ./media
[tcjj3@debian]$ cd media_build
[tcjj3@debian]$ make dir DIR=../media
[tcjj3@debian]$ make distclean
[tcjj3@debian]$ make -j4
[tcjj3@debian]$ sudo make install
[tcjj3@debian]$ cd ..
If make -j4 has errors like "ERROR: "__devm_regmap_init_sccb" [/home/tcjj3/tbsdriver/media_build/v4l/ov9650.ko] undefined" and "ERROR: "__devm_regmap_init_sccb" [/home/tcjj3/tbsdriver/media_build/v4l/ov772x.ko] undefined", just use the following commands instead (these commands are from this comment: tbsdtv/linux_media#209 (comment)):
[tcjj3@debian]$ sudo apt update
[tcjj3@debian]$ sudo apt install -y wget ca-certificates git patchutils gcc kmod make libproc-processtable-perl libelf-dev
[tcjj3@debian]$ mkdir tbsdriver
[tcjj3@debian]$ cd tbsdriver
[tcjj3@debian]$ git clone https://github.com/tbsdtv/media_build.git
[tcjj3@debian]$ git clone --depth=1 https://github.com/tbsdtv/linux_media.git -b latest ./media
[tcjj3@debian]$ cd media_build
[tcjj3@debian]$ make dir DIR=../media
[tcjj3@debian]$ sed -i '/VIDEO_OV9650/d' ./v4l/versions.txt && sed -i '/9.255.255/a VIDEO_OV9650' ./v4l/versions.txt
[tcjj3@debian]$ sed -i '/VIDEO_OV772X/d' ./v4l/versions.txt && sed -i '/9.255.255/a VIDEO_OV772X' ./v4l/versions.txt
[tcjj3@debian]$ sed -i -r 's/(^CONFIG.*_RC.*=)./\1n/g' v4l/.config
[tcjj3@debian]$ make distclean
[tcjj3@debian]$ make -j4
[tcjj3@debian]$ sudo make install
[tcjj3@debian]$ cd ..
(2) Install "firmware":
[tcjj3@debian]$ wget http://www.tbsdtv.com/download/document/linux/tbs-tuner-firmwares_v1.0.tar.bz2
[tcjj3@debian]$ sudo tar jxf tbs-tuner-firmwares_v1.0.tar.bz2 -C /lib/firmware/
[tcjj3@debian]$ cd ..
[tcjj3@debian]$ sudo reboot
2. Create link files:
Create link files for DVB interfaces to "lock the S signal":
[tcjj3@debian]$ sudo ln -s demux0 /dev/dvb/adapter0/demux1
[tcjj3@debian]$ sudo ln -s dvr0 /dev/dvb/adapter0/dvr1
[tcjj3@debian]$ sudo ln -s net0 /dev/dvb/adapter0/net1
- Install docker-ce:
[tcjj3@debian]$ sudo apt install -y curl
[tcjj3@debian]$ curl -fsSL get.docker.com -o get-docker.sh
[tcjj3@debian]$ sudo sh get-docker.sh
[tcjj3@debian]$ sudo groupadd docker
[tcjj3@debian]$ sudo usermod -aG docker $USER
[tcjj3@debian]$ sudo systemctl enable docker && sudo systemctl start docker
- Run Himawari-8_Docker:
[tcjj3@debian]$ sudo docker volume create himawari-rx
[tcjj3@debian]$ sudo docker volume create himawari-rx_config
[tcjj3@debian]$ sudo docker run -d -i -t \
--privileged \
--restart always \
--name=himawari-8 \
--device /dev/bus/usb \
-v /dev/dvb:/dev/dvb \
-p 5006:5006 \
-p 9999:9999 \
-v himawari-rx_config:/opt/himawari-rx_config \
-v himawari-rx:/usr/local/bin/himawari-rx/src/received \
tcjj3/himawari-8_docker:latest
Or using other ports (The following example is forwarded local ports 5007 & 9998 to docker container's ports 5006 & 9999):
[tcjj3@debian]$ sudo docker volume create himawari-rx
[tcjj3@debian]$ sudo docker volume create himawari-rx_config
[tcjj3@debian]$ sudo docker run -d -i -t \
--privileged \
--restart always \
--name=himawari-8 \
--device /dev/bus/usb \
-v /dev/dvb:/dev/dvb \
-p 5007:5006 \
-p 9998:9999 \
-v himawari-rx_config:/opt/himawari-rx_config \
-v himawari-rx:/usr/local/bin/himawari-rx/src/received \
tcjj3/himawari-8_docker:latest
If you want to choose device or frontend, just add a "DEVICE" environment variable in it (if it is empty, the script will use adapter0 and use the frontend automatically), it is like "-d name" or "--device-name name" for TSDuck. (Use tsp -I dvb --help command for help)
-d name
--device-name name
Specify the DVB receiver device name, /dev/dvb/adapterA[:F[:M[:V]]] where
A = adapter number, F = frontend number (default: 0), M = demux number
(default: 0), V = dvr number (default: 0). By default, the first receiver
device is used. Use the tslsdvb utility to list all DVB devices.
For example (for TBS5520SE Device [ adapter 0 frontend 1, is for DVB-S2 ]):
[tcjj3@debian]$ sudo docker volume create himawari-rx
[tcjj3@debian]$ sudo docker volume create himawari-rx_config
[tcjj3@debian]$ sudo docker run -d -i -t \
--privileged \
--restart always \
--name=himawari-8 \
--device /dev/bus/usb \
-v /dev/dvb:/dev/dvb \
-e DEVICE="/dev/dvb/adapter0:1" \
-p 5007:5006 \
-p 9998:9999 \
-v himawari-rx_config:/opt/himawari-rx_config \
-v himawari-rx:/usr/local/bin/himawari-rx/src/received \
tcjj3/himawari-8_docker:latest
If you want to customize the times of generate animation pictures, just add a "CONVERT_TIMES" environment variable in it (default CONVERT_TIMES value is "0000"). The times are UTC times, included hours and minutes. Each time connnected with ",", like "2200,0000".
For example:
[tcjj3@debian]$ sudo docker volume create himawari-rx
[tcjj3@debian]$ sudo docker volume create himawari-rx_config
[tcjj3@debian]$ sudo docker run -d -i -t \
--privileged \
--restart always \
--name=himawari-8 \
--device /dev/bus/usb \
-v /dev/dvb:/dev/dvb \
-e CONVERT_TIMES=2200,0000 \
-p 5007:5006 \
-p 9998:9999 \
-v himawari-rx_config:/opt/himawari-rx_config \
-v himawari-rx:/usr/local/bin/himawari-rx/src/received \
tcjj3/himawari-8_docker:latest
[tcjj3@debian]$ cd /var/lib/docker/volumes/himawari-rx/_data
- Website (Default port):
http://[Your IP]:5006
Or the other port (Using in the above "Start" example):
http://[Your IP]:5007
- Filebrowser (Default port):
http://[Your IP]:9999
Or the other port (Using in the above "Start" example):
http://[Your IP]:9998