Parallax Engine that reacts to the orientation of a smart device. Where no gyroscope or motion detection hardware is available, the position of the cursor is used instead.

Check out this demo to see it in action!

Setup

Add parallax.js to your project with npm install --save https://github.com/wagerfield/parallax or yarn add https://github.com/wagerfield/parallax.
Now, you can require or import the library, depending on your favorite workflow.

const Parallax = require('parallax-js')
// or
import Parallax from 'parallax-js'

Of course you can also simply copy over the compiled file from the dist folder and include it like any other 3rd party script. Make sure to run npm install in the Parallax folder to compile the project. Or download the precompiled files from the release section.

<script src="dist/parallax.js"></script>
<!-- or if you prefer minified -->
<script src="dist/parallax.min.js"></script>

Give each element within your scene a data-depth attribute specifying its depth within the scene. A depth of 0 will cause the layer to remain stationary, and a depth of 1 will cause the layer to move by the total effect of the calculated motion. Values inbetween 0 and 1 will cause the layer to move by an amount relative to the supplied ratio.

<div id="scene">
  <div data-depth="0.00"><img src="layer1.png"></div>
  <div data-depth="0.20"><img src="layer2.png"></div>
  <div data-depth="0.40"><img src="layer3.png"></div>
  <div data-depth="0.60"><img src="layer4.png"></div>
  <div data-depth="0.80"><img src="layer5.png"></div>
  <div data-depth="1.00"><img src="layer6.png"></div>
</div>

To kickoff a Parallax scene, select your parent DOM Element and pass it to the Parallax constructor.

var scene = document.getElementById('scene')
// or, if you use jQuery
var scene = $('#scene').get(0)

var parallax = new Parallax(scene)

Interactivity

If you need to interact with the layers, don't forget to set the pointerEvents option, and adjust your layer CSS.
Then set an absolute position for all layer child elements, just like it's done in examples/pages/interactive.html. Alternatively, set pointer-events: none on the layers and pointer-events: all on the layer child elements.

Understanding Layer Motion Calculations

The amount of motion that each layer moves by depends on 3 contributing factors:

1. The scalarX and scalarY values (see Behaviours below for configuration)
2. The dimensions of the parent DOM element
3. The depth of a layer within a parallax scene (specified by it's data-depth attribute)

The calculation for this motion is as follows:

xMotion = parentElement.width  * (scalarX / 100) * layerDepth
yMotion = parentElement.height * (scalarY / 100) * layerDepth

So for a layer with a data-depth value of 0.5 within a scene that has both the scalarX and scalarY values set to 10 ( the default ) where the containing scene element is 1000px x 1000px, the total motion of the layer in both x and y would be:

xMotion = 1000 * (10 / 100) * 0.5 = 50 // 50px of positive and negative motion in x
yMotion = 1000 * (10 / 100) * 0.5 = 50 // 50px of positive and negative motion in y

Behaviours

There are a number of behaviours that you can setup for any given Parallax instance. These behaviours can either be specified in the markup via data attributes or in JavaScript via the constructor and API.

Behaviour	Values	Default	Description
relativeInput	true or false	false	Specifies whether or not to use the coordinate system of the scene. Mouse input only.
clipRelativeInput	true or false	false	Specifies whether or not to clip the mouse input to the scene bounds. No effect in combination with hoverOnly. Mouse input only.
hoverOnly	true or false	false	Apply the parallax effect only while the cursor is over the scene. Best together with relativeInput set to true. Mouse input only.
inputElement	null or HTML element	null	Element used for input calculations. Works only with relativeInput, might make sense to set hoverOnly. When set via data-input-element attribute, takes a query selector. Mouse input only.
calibrate-x	true or false	false	Specifies whether or not to cache & calculate the motion relative to the initial x axis value on initialisation.
calibrate-y	true or false	true	Specifies whether or not to cache & calculate the motion relative to the initial y axis value on initialisation.
invert-x	true or false	true	true moves layers in opposition to the device motion, false slides them away.
invert-y	true or false	true	true moves layers in opposition to the device motion, false slides them away.
limit-x	number or false	false	A numeric value limits the total range of motion in x, false allows layers to move with complete freedom.
limit-y	number or false	false	A numeric value limits the total range of motion in y, false allows layers to move with complete freedom.
scalar-x	number	10.0	Multiplies the input motion by this value, increasing or decreasing the sensitivity of the layer motion.
scalar-y	number	10.0	Multiplies the input motion by this value, increasing or decreasing the sensitivity of the layer motion.
friction-x	number 0 - 1	0.1	The amount of friction the layers experience. This essentially adds some easing to the layer motion.
friction-y	number 0 - 1	0.1	The amount of friction the layers experience. This essentially adds some easing to the layer motion.
origin-x	number	0.5	The x origin of the mouse input. Defaults to 0.5 (the center). 0 moves the origin to the left edge, 1 to the right edge. Mouse input only.
origin-y	number	0.5	The y origin of the mouse input. Defaults to 0.5 (the center). 0 moves the origin to the top edge, 1 to the bottom edge. Mouse input only.
precision	integer	1	Decimals the element positions should be rounded to. Changing this value should not be necessary anytime soon.
pointerEvents	true or false	false	Leaving this at false might increase the performance in some instances, while removing pointer events for the scene - eg, Links are not clickable
onReady	null or function	null	Function that will be called as soon as Parallax setup is completed. Might take up to 1000ms (calibrationDelay * 2)

In addition to the behaviours described above, there are the methods enable() and disable() that activate and deactivate the Parallax instance respectively.

Behaviours: Data Attributes Example

<div id="scene"
  data-relative-input="true"
  data-clip-relative-input="false"
  data-hover-only="true"
  data-input-element="#myinput"
  data-calibrate-x="false"
  data-calibrate-y="true"
  data-invert-x="false"
  data-invert-y="true"
  data-limit-x="false"
  data-limit-y="10"
  data-scalar-x="2"
  data-scalar-y="8"
  data-friction-x="0.2"
  data-friction-y="0.8"
  data-origin-x="0.0"
  data-origin-y="1.0"
  data-precision="1"
  data-pointer-events="false">
  <div data-depth="0.00"><img src="graphics/layer1.png"></div>
  <div data-depth="0.20"><img src="graphics/layer2.png"></div>
  <div data-depth="0.40"><img src="graphics/layer3.png"></div>
  <div data-depth="0.60"><img src="graphics/layer4.png"></div>
  <div data-depth="0.80"><img src="graphics/layer5.png"></div>
  <div data-depth="1.00"><img src="graphics/layer6.png"></div>
</div>

Behaviours: Constructor Object Example

var scene = document.getElementById('scene');
var parallax = new Parallax(scene, {
  relativeInput: true,
  clipRelativeInput: false,
  hoverOnly: true,
  inputElement: document.getElementById('myinput'),
  calibrateX: false,
  calibrateY: true,
  invertX: false,
  invertY: true,
  limitX: false,
  limitY: 10,
  scalarX: 2,
  scalarY: 8,
  frictionX: 0.2,
  frictionY: 0.8,
  originX: 0.0,
  originY: 1.0,
  precision: 1,
  pointerEvents: false,
  onReady: function() { alert('ready!'); }
});

Behaviours: API Example

var scene = document.getElementById('scene');
var parallax = new Parallax(scene);
parallax.enable();
parallax.disable();
parallax.updateLayers(); // Useful for reparsing the layers in your scene if you change their data-depth value
parallax.calibrate(false, true);
parallax.invert(false, true);
parallax.limit(false, 10);
parallax.scalar(2, 8);
parallax.friction(0.2, 0.8);
parallax.origin(0.0, 1.0);
parallax.setInputElement(document.getElementById('newinput'));

iOS

If you are writing a native iOS application and would like to use parallax.js within a UIWebView, you will need to do a little bit of work to get it running.

UIWebView no longer automatically receives the deviceorientation event, so your native application must intercept the events from the gyroscope and reroute them to the UIWebView:

1. Include the CoreMotion framework #import <CoreMotion/CoreMotion.h> and create a reference to the UIWebView @property(nonatomic, strong) IBOutlet UIWebView *parallaxWebView;
2. Add a property to the app delegate (or controller that will own the UIWebView) @property(nonatomic, strong) CMMotionManager *motionManager;
3. Finally, make the following calls:

self.motionManager = [[CMMotionManager alloc] init];
if (self.motionManager.isGyroAvailable && !self.motionManager.isGyroActive) {
  [self.motionManager setGyroUpdateInterval:0.5f]; // Set the event update frequency (in seconds)
  [self.motionManager startGyroUpdatesToQueue:NSOperationQueue.mainQueue
                                  withHandler:^(CMGyroData *gyroData, NSError *error) {
    NSString *js = [NSString stringWithFormat:@"parallax.onDeviceOrientation({beta:%f, gamma:%f})", gyroData.rotationRate.x, gyroData.rotationRate.y];
    [self.parallaxWebView stringByEvaluatingJavaScriptFromString:js];
  }];
}

Build

As a prerequisite, you will need gulp installed: npm install -g gulp

npm install
gulp

gulp will watch the source directory for changes and automatically build the dist files, serving some demo files with live reload.

Authors

Matthew Wagerfield: @wagerfield
René Roth: Website

License

Licensed under MIT. Enjoy.