NRC7292 Standalone SDK Package

Notice

Note

Starting from version 1.4, the normal passthrough mode is not supported in UART mode as mentioned at 7.4 of https://github.com/newracom/nrc7292_sdk/blob/master/package/standalone/doc/UG-7292-006-AT_Command.pdf. However, it can still be used in UART-HFC and HSPI modes. Starting from version 1.4, kindly utilize the FirmwareFlashTool.exe located in the package/standalone/tools/external directory. Please do not use package/standalone/tools/external_tools/FirmwareFlashTool.exe of v1.3.4 rev08. Use other v1.3.4 revision's one instead.

Caution

The software package released here is specifically designed for the NRC7292 EVK, and the accompanying board data file in https://github.com/newracom/nrc7292_sdk/tree/master/package/standalone/bdf/nrc7292 is intended solely for this model. If users plan to use this software package with other devices that incorporate the NRC7292 chip, they should utilize the board data file supplied by the device's vendor.

Release roadmap

• v1.6.1 (2024.03.22): Hotfix
• v1.6 (2023.10.27)
• v1.5.2 (2023.09.01): Hotfix
• v1.5.1 (2023.08.31)
• v1.5 (2023.06.30)
• v1.4 (2023.03.31)
• v1.3.4_rev09 (2022.10.24)
• v1.3.4_rev08 (2022.08.09)
• v1.3.4_rev07 (2022.07.19)
• v1.3.4_rev06 (2022.04.05)
• v1.3.4_rev05 (2022.03.16)
• v1.3.4_rev04 (2022.03.02)
• v1.3.4_rev03 (2021.12.08)
• v1.3.4_rev02 (2021.12.07)
• v1.3.4_rev01 (2021.11.04)
• v1.3.4 (2021.10.22)
• v1.3.3 (skip to sync the version number with nrc7292_sw_pkg)
• v1.3.2 (2020.09.16)
• v1.3.1 (2020.08.05)
• v1.3.0 (2020.07.19)

Latest release

• NRC7292_Standalone_SDK_v1.6

Release package contents

• standalone: NRC7292 standalone SDK package for global regulatory domains

Apply a specific package

If you want to apply a specific package to your exiting package directory, you can choose one of following methods.

Method #1: replace the whole package

Let's assume that you have v1.3.0 and want to apply v1.3.1 to your package location.

1. Download a specific package you want.
   • If it is official release version 1.3.1
     1. Go to https://github.com/newracom/nrc7292_sdk/releases and choose the release package you want.
     2. Download the compressed package: zip version or tar.gz version
     3. Check the filename: nrc7292_sdk-1.3.1.zip or nrc7292_sdk-1.3.1.tar.gz
   • If it is the latest package
     1. Click "Code" and then click "Download ZIP"
     2. Check the filename: nrc7292_sdk-master.zip
2. Replace your old package directory with the one you downloaded.

Method #2: pull down a branch

This method requires a cloned repository and a connection to the internet.

1. Go to the repository directory

   cd repo/nrc7292_sdk
   

2. Pull updates
   • If you want to pull the latest updates from master branch

   git pull
   

   • If you want to use a specific branch checkout it by using tag version

   git tag -l
   git checkout v1.3.1
   

NRC7292 Standalone SDK User Guide

Get NRC7292 Standalone SDK Package

NRC7292 Standalone SDK package is provided in this repository. Please use the following git command to get it.

cd ~/
git clone https://github.com/newracom/nrc7292_sdk.git

Get the detailed user guide

Please refer to UG-7292-004-Standalone SDK.pdf in doc directory.