Skip to content

Signal Capture for debug

hasu@tmk edited this page Aug 28, 2023 · 26 revisions

Signal Capture Firmware

WORK_IN_PROGRESS

This is not that useful if you have already logic analyzer or oscilloscope. This can be used by users who don't have such equipments to see signal of their keyboard.

'Signal Capture' firmwares code is available for converters listed below.

Prebuilt firmware

Download proper firmware *_capture_*.hex for your converter.

Build firmware

Build 'Signal Capture' firmware and flash it onto your converter with commands like below.

make -f Makefile.capture clean
make -f Makefile.capture
make -f Makefile.capture dfu

Capture record

Signal Capture prints signal data in text format on hid_listen like below.

0021 0001 0001 6401 D423 D5C2 D720 D962 DBD0 DE22 DF53 E091 E2E3 E402 

Convert into VCD format

Capture records need to be convertered into Value Change Dump(VCD) format using tmk_core/common/capture2vcd.py to see signal.

You need to install pyvcd before using the script.

$ pip3 install pyvcd

To convert into VCD format:

$ python3 capture2vcd.py <capture_file>

or

$ cat <capture_data> | python3 capture2vcd.py

View signals

You can see converted VCD data with tool like Sigrok PulsView.

Internals

Capture record format

Captured data are stored in ring buffer at AVR SRAM(0x100-2FF) temporarily and then, printed in format below.

Capture record format:

    P: pin state(4-bit)
    T: timer(us)
    C: overflow count(4096 per count)

    1. Pin change:      TTTP
    pin state should be changed from state of previous record.
    TTT indicates time(12-bit):     0-FFFh(4095)

    2. Time elapsed:    CC0P
    pin state should be same as state of previous record.
    CC indicates time elapsed:      CC(1-255) * 1000h(4096)

    3. Time elapsed:    000P
    pin state should be same as state of previous record.
    this indicates time elapsed:    256 * 1000h(4096)

Sigrok

PulseView

Decoder

Installation

Just place decoder holder in ~/.local/share/libsigrokdecode/decoders on Linux and macOS, or %ProgramData%\libsigrokdecode\decoders on Windows.

IBMPC AT

ADB

Clone this wiki locally