Skip to content

Commit

Permalink
Avoid dirtying the final TXGs when exporting a pool
Browse files Browse the repository at this point in the history
There are two codepaths than can dirty final TXGs:

1) If calling spa_export_common()->spa_unload()->
   spa_unload_log_sm_flush_all() after the spa_final_txg is set, then
   spa_sync()->spa_flush_metaslabs() may end up dirtying the final
   TXGs. Then we have the following panic:
   Call Trace:
    <TASK>
    dump_stack_lvl+0x46/0x62
    spl_panic+0xea/0x102 [spl]
    dbuf_dirty+0xcd6/0x11b0 [zfs]
    zap_lockdir_impl+0x321/0x590 [zfs]
    zap_lockdir+0xed/0x150 [zfs]
    zap_update+0x69/0x250 [zfs]
    feature_sync+0x5f/0x190 [zfs]
    space_map_alloc+0x83/0xc0 [zfs]
    spa_generate_syncing_log_sm+0x10b/0x2f0 [zfs]
    spa_flush_metaslabs+0xb2/0x350 [zfs]
    spa_sync_iterate_to_convergence+0x15a/0x320 [zfs]
    spa_sync+0x2e0/0x840 [zfs]
    txg_sync_thread+0x2b1/0x3f0 [zfs]
    thread_generic_wrapper+0x62/0xa0 [spl]
    kthread+0x127/0x150
    ret_from_fork+0x22/0x30
    </TASK>

2) Calling vdev_*_stop_all() for a second time in spa_unload() after
   spa_export_common() unnecessarily delays the final TXGs beyond what
   spa_final_txg is set at.

Fix this by performing the check and call for
spa_unload_log_sm_flush_all() before the spa_final_txg is set in
spa_export_common(). Also check if the spa_final_txg has already been
set in spa_unload() and skip those calls in this case.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
External-issue: https://www.illumos.org/issues/9081
Closes openzfs#13048 
Closes openzfs#13098
  • Loading branch information
gamanakis authored and tonyhutter committed Feb 24, 2022
1 parent 336c6d5 commit 6c6153e
Showing 1 changed file with 43 additions and 17 deletions.
60 changes: 43 additions & 17 deletions module/zfs/spa.c
Original file line number Diff line number Diff line change
Expand Up @@ -1588,25 +1588,33 @@ spa_unload(spa_t *spa)
spa_wake_waiters(spa);

/*
* If the log space map feature is enabled and the pool is getting
* exported (but not destroyed), we want to spend some time flushing
* as many metaslabs as we can in an attempt to destroy log space
* maps and save import time.
* If we have set the spa_final_txg, we have already performed the
* tasks below in spa_export_common(). We should not redo it here since
* we delay the final TXGs beyond what spa_final_txg is set at.
*/
if (spa_should_flush_logs_on_unload(spa))
spa_unload_log_sm_flush_all(spa);
if (spa->spa_final_txg == UINT64_MAX) {
/*
* If the log space map feature is enabled and the pool is
* getting exported (but not destroyed), we want to spend some
* time flushing as many metaslabs as we can in an attempt to
* destroy log space maps and save import time.
*/
if (spa_should_flush_logs_on_unload(spa))
spa_unload_log_sm_flush_all(spa);

/*
* Stop async tasks.
*/
spa_async_suspend(spa);
/*
* Stop async tasks.
*/
spa_async_suspend(spa);

if (spa->spa_root_vdev) {
vdev_t *root_vdev = spa->spa_root_vdev;
vdev_initialize_stop_all(root_vdev, VDEV_INITIALIZE_ACTIVE);
vdev_trim_stop_all(root_vdev, VDEV_TRIM_ACTIVE);
vdev_autotrim_stop_all(spa);
vdev_rebuild_stop_all(spa);
if (spa->spa_root_vdev) {
vdev_t *root_vdev = spa->spa_root_vdev;
vdev_initialize_stop_all(root_vdev,
VDEV_INITIALIZE_ACTIVE);
vdev_trim_stop_all(root_vdev, VDEV_TRIM_ACTIVE);
vdev_autotrim_stop_all(spa);
vdev_rebuild_stop_all(spa);
}
}

/*
Expand Down Expand Up @@ -6416,9 +6424,27 @@ spa_export_common(const char *pool, int new_state, nvlist_t **oldconfig,
if (new_state != POOL_STATE_UNINITIALIZED && !hardforce) {
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa->spa_state = new_state;
vdev_config_dirty(spa->spa_root_vdev);
spa_config_exit(spa, SCL_ALL, FTAG);
}

/*
* If the log space map feature is enabled and the pool is
* getting exported (but not destroyed), we want to spend some
* time flushing as many metaslabs as we can in an attempt to
* destroy log space maps and save import time. This has to be
* done before we set the spa_final_txg, otherwise
* spa_sync() -> spa_flush_metaslabs() may dirty the final TXGs.
* spa_should_flush_logs_on_unload() should be called after
* spa_state has been set to the new_state.
*/
if (spa_should_flush_logs_on_unload(spa))
spa_unload_log_sm_flush_all(spa);

if (new_state != POOL_STATE_UNINITIALIZED && !hardforce) {
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa->spa_final_txg = spa_last_synced_txg(spa) +
TXG_DEFER_SIZE + 1;
vdev_config_dirty(spa->spa_root_vdev);
spa_config_exit(spa, SCL_ALL, FTAG);
}
}
Expand Down

0 comments on commit 6c6153e

Please sign in to comment.