IoT Geiger Counter with ESP32, OLED Display, Thingspeak Channel and MQTT

☢️ ESP8266 / ESP32 Firmware for collecting and reporting statistics from Geiger counters

IoT-devices GGreg20_V3 Ionizing Radiation Detector module under Home Assistant server with ESPHome plugin setup example

Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.

A nuclear radiation sensor with a Geiger–Müller (GM) tube as the detector. This widely used solution is cost-effective, easy to construct, and ideal for measuring ionizing radiation.

An easy-to-build Geiger counter based on M4011 Geiger muller tube and Atmega328p(MCU)(SMD)

IoT-devices GGreg20_V3 ionizing radiation detector module driver library for Arduino

IoT-devices GGreg20_V3 ionizing radiation Geiger counter module for generic ESP32 under Home Assistant with ESPHome setup example

GGreg20_V3 with Generic ESP32 with Tasmota Firmware and Berry script driver example

Geiger Mueller counter for IoT on an ESP8266 microcontroller

GGreg20_V3 Ionizing Radiation Detector for Arduino UNO WOKWI simulator

This is Geiger-Muller Counter

Prometheus exporter for GQ GMC (Geiger–Muller counter) devices

GQ GMC-500+ USB serial to MQTT bridge

GM (Geiger-Muller) Tube Conversion Factor Calculator

Geiger Counter in MATLAB / Счетчик Гейгера на MATLAB

Radiation monitoring solution for a variety of instrument types.

A hackable open source sensor IoT board with network interface. A DIY Geiger counter KIT to contribute readings to the uRADMonitor network.

DIY Geiger counter project using Wemos D1 Mini Pro

Geiger counter library for micropython