enetc: Add ENETC PF level external MDIO support

Each ENETC PF has its own MDIO interface, the corresponding
MDIO registers are mapped in the ENETC's Port register block.
The current patch adds a driver for these PF level MDIO buses,
so that each PF can manage directly its own external link.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/enetc/Makefile

@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o
-fsl-enetc-$(CONFIG_FSL_ENETC) += enetc.o enetc_cbdr.o enetc_ethtool.o
+fsl-enetc-$(CONFIG_FSL_ENETC) += enetc.o enetc_cbdr.o enetc_ethtool.o \
+				 enetc_mdio.o
 fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o
 fsl-enetc-objs := enetc_pf.o $(fsl-enetc-y)
 

drivers/net/ethernet/freescale/enetc/enetc_mdio.c

@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright 2019 NXP */
+
+#include <linux/mdio.h>
+#include <linux/of_mdio.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+
+#include "enetc_pf.h"
+
+struct enetc_mdio_regs {
+	u32	mdio_cfg;	/* MDIO configuration and status */
+	u32	mdio_ctl;	/* MDIO control */
+	u32	mdio_data;	/* MDIO data */
+	u32	mdio_addr;	/* MDIO address */
+};
+
+#define bus_to_enetc_regs(bus)	(struct enetc_mdio_regs __iomem *)((bus)->priv)
+
+#define ENETC_MDIO_REG_OFFSET	0x1c00
+#define ENETC_MDC_DIV		258
+
+#define MDIO_CFG_CLKDIV(x)	((((x) >> 1) & 0xff) << 8)
+#define MDIO_CFG_BSY		BIT(0)
+#define MDIO_CFG_RD_ER		BIT(1)
+#define MDIO_CFG_ENC45		BIT(6)
+ /* external MDIO only - driven on neg MDC edge */
+#define MDIO_CFG_NEG		BIT(23)
+
+#define MDIO_CTL_DEV_ADDR(x)	((x) & 0x1f)
+#define MDIO_CTL_PORT_ADDR(x)	(((x) & 0x1f) << 5)
+#define MDIO_CTL_READ		BIT(15)
+#define MDIO_DATA(x)		((x) & 0xffff)
+
+#define TIMEOUT	1000
+static int enetc_mdio_wait_complete(struct enetc_mdio_regs __iomem *regs)
+{
+	u32 val;
+
+	return readx_poll_timeout(enetc_rd_reg, &regs->mdio_cfg, val,
+				  !(val & MDIO_CFG_BSY), 10, 10 * TIMEOUT);
+}
+
+static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
+			    u16 value)
+{
+	struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus);
+	u32 mdio_ctl, mdio_cfg;
+	u16 dev_addr;
+	int ret;
+
+	mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
+	if (regnum & MII_ADDR_C45) {
+		dev_addr = (regnum >> 16) & 0x1f;
+		mdio_cfg |= MDIO_CFG_ENC45;
+	} else {
+		/* clause 22 (ie 1G) */
+		dev_addr = regnum & 0x1f;
+		mdio_cfg &= ~MDIO_CFG_ENC45;
+	}
+
+	enetc_wr_reg(&regs->mdio_cfg, mdio_cfg);
+
+	ret = enetc_mdio_wait_complete(regs);
+	if (ret)
+		return ret;
+
+	/* set port and dev addr */
+	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
+	enetc_wr_reg(&regs->mdio_ctl, mdio_ctl);
+
+	/* set the register address */
+	if (regnum & MII_ADDR_C45) {
+		enetc_wr_reg(&regs->mdio_addr, regnum & 0xffff);
+
+		ret = enetc_mdio_wait_complete(regs);
+		if (ret)
+			return ret;
+	}
+
+	/* write the value */
+	enetc_wr_reg(&regs->mdio_data, MDIO_DATA(value));
+
+	ret = enetc_mdio_wait_complete(regs);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+	struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus);
+	u32 mdio_ctl, mdio_cfg;
+	u16 dev_addr, value;
+	int ret;
+
+	mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
+	if (regnum & MII_ADDR_C45) {
+		dev_addr = (regnum >> 16) & 0x1f;
+		mdio_cfg |= MDIO_CFG_ENC45;
+	} else {
+		dev_addr = regnum & 0x1f;
+		mdio_cfg &= ~MDIO_CFG_ENC45;
+	}
+
+	enetc_wr_reg(&regs->mdio_cfg, mdio_cfg);
+
+	ret = enetc_mdio_wait_complete(regs);
+	if (ret)
+		return ret;
+
+	/* set port and device addr */
+	mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
+	enetc_wr_reg(&regs->mdio_ctl, mdio_ctl);
+
+	/* set the register address */
+	if (regnum & MII_ADDR_C45) {
+		enetc_wr_reg(&regs->mdio_addr, regnum & 0xffff);
+
+		ret = enetc_mdio_wait_complete(regs);
+		if (ret)
+			return ret;
+	}
+
+	/* initiate the read */
+	enetc_wr_reg(&regs->mdio_ctl, mdio_ctl | MDIO_CTL_READ);
+
+	ret = enetc_mdio_wait_complete(regs);
+	if (ret)
+		return ret;
+
+	/* return all Fs if nothing was there */
+	if (enetc_rd_reg(&regs->mdio_cfg) & MDIO_CFG_RD_ER) {
+		dev_dbg(&bus->dev,
+			"Error while reading PHY%d reg at %d.%hhu\n",
+			phy_id, dev_addr, regnum);
+		return 0xffff;
+	}
+
+	value = enetc_rd_reg(&regs->mdio_data) & 0xffff;
+
+	return value;
+}
+
+int enetc_mdio_probe(struct enetc_pf *pf)
+{
+	struct device *dev = &pf->si->pdev->dev;
+	struct enetc_mdio_regs __iomem *regs;
+	struct device_node *np;
+	struct mii_bus *bus;
+	int ret;
+
+	bus = mdiobus_alloc_size(sizeof(regs));
+	if (!bus)
+		return -ENOMEM;
+
+	bus->name = "Freescale ENETC MDIO Bus";
+	bus->read = enetc_mdio_read;
+	bus->write = enetc_mdio_write;
+	bus->parent = dev;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
+
+	/* store the enetc mdio base address for this bus */
+	regs = pf->si->hw.port + ENETC_MDIO_REG_OFFSET;
+	bus->priv = regs;
+
+	np = of_get_child_by_name(dev->of_node, "mdio");
+	if (!np) {
+		dev_err(dev, "MDIO node missing\n");
+		ret = -EINVAL;
+		goto err_registration;
+	}
+
+	ret = of_mdiobus_register(bus, np);
+	if (ret) {
+		of_node_put(np);
+		dev_err(dev, "cannot register MDIO bus\n");
+		goto err_registration;
+	}
+
+	of_node_put(np);
+	pf->mdio = bus;
+
+	return 0;
+
+err_registration:
+	mdiobus_free(bus);
+
+	return ret;
+}
+
+void enetc_mdio_remove(struct enetc_pf *pf)
+{
+	if (pf->mdio) {
+		mdiobus_unregister(pf->mdio);
+		mdiobus_free(pf->mdio);
+	}
+}

drivers/net/ethernet/freescale/enetc/enetc_pf.c

@@ -746,6 +746,7 @@ static void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
 
 static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
 {
+	struct enetc_pf *pf = enetc_si_priv(priv->si);
 	struct device_node *np = priv->dev->of_node;
 	int err;
 
@@ -770,12 +771,22 @@ static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
 		priv->phy_node = of_node_get(np);
 	}
 
+	if (!of_phy_is_fixed_link(np)) {
+		err = enetc_mdio_probe(pf);
+		if (err) {
+			of_node_put(priv->phy_node);
+			return err;
+		}
+	}
+
 	priv->if_mode = of_get_phy_mode(np);
 	if (priv->if_mode < 0) {
 		dev_err(priv->dev, "missing phy type\n");
 		of_node_put(priv->phy_node);
 		if (of_phy_is_fixed_link(np))
 			of_phy_deregister_fixed_link(np);
+		else
+			enetc_mdio_remove(pf);
 
 		return -EINVAL;
 	}
@@ -898,6 +909,7 @@ static void enetc_pf_remove(struct pci_dev *pdev)
 
 	unregister_netdev(si->ndev);
 
+	enetc_mdio_remove(pf);
 	enetc_of_put_phy(priv);
 
 	enetc_free_msix(priv);

drivers/net/ethernet/freescale/enetc/enetc_pf.h

@@ -42,8 +42,14 @@ struct enetc_pf {
 	char vlan_promisc_simap; /* bitmap of SIs in VLAN promisc mode */
 	DECLARE_BITMAP(vlan_ht_filter, ENETC_VLAN_HT_SIZE);
 	DECLARE_BITMAP(active_vlans, VLAN_N_VID);
+
+	struct mii_bus *mdio; /* saved for cleanup */
 };
 
 int enetc_msg_psi_init(struct enetc_pf *pf);
 void enetc_msg_psi_free(struct enetc_pf *pf);
 void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int mbox_id, u16 *status);
+
+/* MDIO */
+int enetc_mdio_probe(struct enetc_pf *pf);
+void enetc_mdio_remove(struct enetc_pf *pf);