Patch for LZ4 decompression bug #188

Antonius-git · 2015-05-27T15:07:31Z

Sorry if i've misformatted this patch, i'm not terribly comfortable with github :(

The issue (and patch by Krzysztof Kolasa emerged here https://lkml.org/lkml/2015/4/3/453)

64bit kernels using the latest upstream source and compressed with LZ4 (mine included) are unable to decompress the image and simply halt saying
"Decoding failed
-- System halted"

The attached patch by Krzysztof successfully solved this issue, but there was a problem with its formatting, so it wasn't accepted. I'm hoping a suitable patch can be made (if i've horribly mucked this up) before the 4.1 kernel reaches stability, even better if it could make it in before this weekend's next -rc bump.
I cannot comment on the suitability or style of the code itself, i am simply trying to push it forward, since it's quite important for fellow LZ4 users.

Thank you in advance!

Sorry if i've misformatted this patch, i'm not terribly comfortable with github :( The issue (and patch by Krzysztof Kolasa emerged here https://lkml.org/lkml/2015/4/3/453) 64bit kernels using the latest upstream source and compressed with LZ4 (mine included) are unable to decompress the image and simply halt saying "Decoding failed > -- System halted" The patch mentioned successfully solved this issue, but there was a problem with its formatting. I'm hoping a suitable patch can be made (incase i've horribly mucked this up) before the 4.1 kernel reaches stability, even better if it could make it in before this weekend's next -rc bump. I cannot comment on the suitability or style of the patch, i am simply trying to push it forward, since it's quite important for fellow LZ4 users. Thank you in advance!

Antonius-git · 2015-05-27T15:24:19Z

cbeb22a

Fix checkpatch warnings: WARNING: Use #include <linux/io.h> instead of <asm/io.h> torvalds#38: FILE: drivers/tty/serial/sunzilog.c:38: +#include <asm/io.h> WARNING: line over 80 characters torvalds#109: FILE: drivers/tty/serial/sunzilog.c:109: +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) WARNING: line over 80 characters torvalds#116: FILE: drivers/tty/serial/sunzilog.c:116: +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) WARNING: line over 80 characters torvalds#179: FILE: drivers/tty/serial/sunzilog.c:179: +static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) WARNING: Missing a blank line after declarations torvalds#188: FILE: drivers/tty/serial/sunzilog.c:188: + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) ERROR: trailing whitespace torvalds#231: FILE: drivers/tty/serial/sunzilog.c:231: +^I$ WARNING: braces {} are not necessary for any arm of this statement torvalds#276: FILE: drivers/tty/serial/sunzilog.c:276: + if (ZS_TX_ACTIVE(up)) { [...] + } else { [...] ERROR: else should follow close brace '}' torvalds#378: FILE: drivers/tty/serial/sunzilog.c:378: + } + else if (r1 & PAR_ERR) ERROR: code indent should use tabs where possible torvalds#397: FILE: drivers/tty/serial/sunzilog.c:397: +^I^I ^Itty_insert_flip_char(port, ch, flag);$ WARNING: please, no space before tabs torvalds#397: FILE: drivers/tty/serial/sunzilog.c:397: +^I^I ^Itty_insert_flip_char(port, ch, flag);$ WARNING: line over 80 characters torvalds#440: FILE: drivers/tty/serial/sunzilog.c:440: + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. WARNING: line over 80 characters torvalds#441: FILE: drivers/tty/serial/sunzilog.c:441: + * But it does not tell us which bit has changed, we have to keep WARNING: Missing a blank line after declarations torvalds#464: FILE: drivers/tty/serial/sunzilog.c:464: + unsigned char status = readb(&channel->control); + ZSDELAY(); WARNING: line over 80 characters torvalds#468: FILE: drivers/tty/serial/sunzilog.c:468: + * It can occur because of how we do serial console writes. It would WARNING: line over 80 characters torvalds#469: FILE: drivers/tty/serial/sunzilog.c:469: + * be nice to transmit console writes just like we normally would for WARNING: line over 80 characters torvalds#470: FILE: drivers/tty/serial/sunzilog.c:470: + * a TTY line. (ie. buffered and TX interrupt driven). That is not WARNING: line over 80 characters torvalds#471: FILE: drivers/tty/serial/sunzilog.c:471: + * easy because console writes cannot sleep. One solution might be WARNING: line over 80 characters torvalds#593: FILE: drivers/tty/serial/sunzilog.c:593: +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) WARNING: plain inline is preferred over __inline__ torvalds#593: FILE: drivers/tty/serial/sunzilog.c:593: +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) ERROR: trailing whitespace torvalds#664: FILE: drivers/tty/serial/sunzilog.c:664: +^I/* NOTE: Not subject to 'transmitter active' rule. */ $ ERROR: trailing whitespace torvalds#752: FILE: drivers/tty/serial/sunzilog.c:752: +^I^I/* NOTE: Not subject to 'transmitter active' rule. */ $ ERROR: trailing whitespace torvalds#779: FILE: drivers/tty/serial/sunzilog.c:779: +^I^I/* NOTE: Not subject to 'transmitter active' rule. */ $ WARNING: line over 80 characters torvalds#999: FILE: drivers/tty/serial/sunzilog.c:999: +static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) WARNING: Missing a blank line after declarations #1142: FILE: drivers/tty/serial/sunzilog.c:1142: + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... #1230: FILE: drivers/tty/serial/sunzilog.c:1230: + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", WARNING: braces {} are not necessary for single statement blocks #1383: FILE: drivers/tty/serial/sunzilog.c:1383: + if (__load_zsregs(channel, up->curregs)) { + up->flags |= SUNZILOG_FLAG_ESCC; + } WARNING: quoted string split across lines #1493: FILE: drivers/tty/serial/sunzilog.c:1493: + dev_info(&op->dev, "Keyboard at MMIO 0x%llx (irq = %d) " + "is a %s\n", WARNING: quoted string split across lines #1497: FILE: drivers/tty/serial/sunzilog.c:1497: + dev_info(&op->dev, "Mouse at MMIO 0x%llx (irq = %d) " + "is a %s\n", WARNING: Missing a blank line after declarations #1581: FILE: drivers/tty/serial/sunzilog.c:1581: + struct uart_sunzilog_port *up = sunzilog_irq_chain; + err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, WARNING: line over 80 characters #1590: FILE: drivers/tty/serial/sunzilog.c:1590: + /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ WARNING: line over 80 characters #1627: FILE: drivers/tty/serial/sunzilog.c:1627: + /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ ERROR: trailing statements should be on next line #1248: FILE: drivers/tty/serial/sunzilog.c:1248: + case B150: baud = 150; break; ERROR: trailing statements should be on next line #1249: FILE: drivers/tty/serial/sunzilog.c:1249: + case B300: baud = 300; break; ERROR: trailing statements should be on next line #1250: FILE: drivers/tty/serial/sunzilog.c:1250: + case B600: baud = 600; break; ERROR: trailing statements should be on next line #1251: FILE: drivers/tty/serial/sunzilog.c:1251: + case B1200: baud = 1200; break; ERROR: trailing statements should be on next line #1252: FILE: drivers/tty/serial/sunzilog.c:1252: + case B2400: baud = 2400; break; ERROR: trailing statements should be on next line #1253: FILE: drivers/tty/serial/sunzilog.c:1253: + case B4800: baud = 4800; break; ERROR: trailing statements should be on next line #1254: FILE: drivers/tty/serial/sunzilog.c:1254: + default: case B9600: baud = 9600; break; ERROR: trailing statements should be on next line #1255: FILE: drivers/tty/serial/sunzilog.c:1255: + case B19200: baud = 19200; break; ERROR: trailing statements should be on next line #1256: FILE: drivers/tty/serial/sunzilog.c:1256: + case B38400: baud = 38400; break; Signed-off-by: Enrico Weigelt <info@metux.net>

it is possible to see a KASAN use-after-free, immediately followed by a NULL dereference crash, with the following command: # tc action add action gate index 3 cycle-time 100000000ns \ > cycle-time-ext 100000000ns clockid CLOCK_TAI BUG: KASAN: use-after-free in tcf_action_init_1+0x8eb/0x960 Write of size 1 at addr ffff88810a5908bc by task tc/883 CPU: 0 PID: 883 Comm: tc Not tainted 5.7.0+ torvalds#188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x75/0xa0 print_address_description.constprop.6+0x1a/0x220 kasan_report.cold.9+0x37/0x7c tcf_action_init_1+0x8eb/0x960 tcf_action_init+0x157/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [...] KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 883 Comm: tc Tainted: G B 5.7.0+ torvalds#188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:tcf_action_fill_size+0xa3/0xf0 [....] RSP: 0018:ffff88813a48f250 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: 0000000000000094 RCX: ffffffffa47c3eb6 RDX: 000000000000000e RSI: 0000000000000008 RDI: 0000000000000070 RBP: ffff88810a590800 R08: 0000000000000004 R09: ffffed1027491e03 R10: 0000000000000003 R11: ffffed1027491e03 R12: 0000000000000000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88810a590800 FS: 00007f62cae8ce40(0000) GS:ffff888147c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f62c9d20a10 CR3: 000000013a52a000 CR4: 0000000000340ef0 Call Trace: tcf_action_init+0x172/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 this is caused by the test on 'cycletime_ext', that is still unassigned when the action is newly created. This makes the action .init() return 0 without calling tcf_idr_insert(), hence the UAF + crash. rework the logic that prevents zero values of cycle-time, as follows: 1) 'tcfg_cycletime_ext' seems to be unused in the action software path, and it was already possible by other means to obtain non-zero cycletime and zero cycletime-ext. So, removing that test should not cause any damage. 2) while at it, we must prevent overwriting configuration data with wrong ones: use a temporary variable for 'tcfg_cycletime', and validate it preserving the original semantic (that allowed computing the cycle time as the sum of all intervals, when not specified by TCA_GATE_CYCLE_TIME). 3) remove the test on 'tcfg_cycletime', no more useful, and avoid returning -EFAULT, which did not seem an appropriate return value for a wrong netlink attribute. Fixes: a51c328 ("net: qos: introduce a gate control flow action") CC: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com>

it is possible to see a KASAN use-after-free, immediately followed by a NULL dereference crash, with the following command: # tc action add action gate index 3 cycle-time 100000000ns \ > cycle-time-ext 100000000ns clockid CLOCK_TAI BUG: KASAN: use-after-free in tcf_action_init_1+0x8eb/0x960 Write of size 1 at addr ffff88810a5908bc by task tc/883 CPU: 0 PID: 883 Comm: tc Not tainted 5.7.0+ torvalds#188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x75/0xa0 print_address_description.constprop.6+0x1a/0x220 kasan_report.cold.9+0x37/0x7c tcf_action_init_1+0x8eb/0x960 tcf_action_init+0x157/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [...] KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 883 Comm: tc Tainted: G B 5.7.0+ torvalds#188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:tcf_action_fill_size+0xa3/0xf0 [....] RSP: 0018:ffff88813a48f250 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: 0000000000000094 RCX: ffffffffa47c3eb6 RDX: 000000000000000e RSI: 0000000000000008 RDI: 0000000000000070 RBP: ffff88810a590800 R08: 0000000000000004 R09: ffffed1027491e03 R10: 0000000000000003 R11: ffffed1027491e03 R12: 0000000000000000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88810a590800 FS: 00007f62cae8ce40(0000) GS:ffff888147c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f62c9d20a10 CR3: 000000013a52a000 CR4: 0000000000340ef0 Call Trace: tcf_action_init+0x172/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 this is caused by the test on 'cycletime_ext', that is still unassigned when the action is newly created. This makes the action .init() return 0 without calling tcf_idr_insert(), hence the UAF + crash. rework the logic that prevents zero values of cycle-time, as follows: 1) 'tcfg_cycletime_ext' seems to be unused in the action software path, and it was already possible by other means to obtain non-zero cycletime and zero cycletime-ext. So, removing that test should not cause any damage. 2) while at it, we must prevent overwriting configuration data with wrong ones: use a temporary variable for 'tcfg_cycletime', and validate it preserving the original semantic (that allowed computing the cycle time as the sum of all intervals, when not specified by TCA_GATE_CYCLE_TIME). 3) remove the test on 'tcfg_cycletime', no more useful, and avoid returning -EFAULT, which did not seem an appropriate return value for a wrong netlink attribute. v2: remove useless 'return;' at the end of void gate_get_start_time() Fixes: a51c328 ("net: qos: introduce a gate control flow action") CC: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com>

it is possible to see a KASAN use-after-free, immediately followed by a NULL dereference crash, with the following command: # tc action add action gate index 3 cycle-time 100000000ns \ > cycle-time-ext 100000000ns clockid CLOCK_TAI BUG: KASAN: use-after-free in tcf_action_init_1+0x8eb/0x960 Write of size 1 at addr ffff88810a5908bc by task tc/883 CPU: 0 PID: 883 Comm: tc Not tainted 5.7.0+ torvalds#188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x75/0xa0 print_address_description.constprop.6+0x1a/0x220 kasan_report.cold.9+0x37/0x7c tcf_action_init_1+0x8eb/0x960 tcf_action_init+0x157/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [...] KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 883 Comm: tc Tainted: G B 5.7.0+ torvalds#188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:tcf_action_fill_size+0xa3/0xf0 [....] RSP: 0018:ffff88813a48f250 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: 0000000000000094 RCX: ffffffffa47c3eb6 RDX: 000000000000000e RSI: 0000000000000008 RDI: 0000000000000070 RBP: ffff88810a590800 R08: 0000000000000004 R09: ffffed1027491e03 R10: 0000000000000003 R11: ffffed1027491e03 R12: 0000000000000000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88810a590800 FS: 00007f62cae8ce40(0000) GS:ffff888147c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f62c9d20a10 CR3: 000000013a52a000 CR4: 0000000000340ef0 Call Trace: tcf_action_init+0x172/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 this is caused by the test on 'cycletime_ext', that is still unassigned when the action is newly created. This makes the action .init() return 0 without calling tcf_idr_insert(), hence the UAF + crash. rework the logic that prevents zero values of cycle-time, as follows: 1) 'tcfg_cycletime_ext' seems to be unused in the action software path, and it was already possible by other means to obtain non-zero cycletime and zero cycletime-ext. So, removing that test should not cause any damage. 2) while at it, we must prevent overwriting configuration data with wrong ones: use a temporary variable for 'tcfg_cycletime', and validate it preserving the original semantic (that allowed computing the cycle time as the sum of all intervals, when not specified by TCA_GATE_CYCLE_TIME). 3) remove the test on 'tcfg_cycletime', no more useful, and avoid returning -EFAULT, which did not seem an appropriate return value for a wrong netlink attribute. v3: fix uninitialized 'cycletime' (thanks to Vladimir Oltean) v2: remove useless 'return;' at the end of void gate_get_start_time() Fixes: a51c328 ("net: qos: introduce a gate control flow action") CC: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the ARMv8.3-PAuth combined branch instructions (braa, retaa etc.) are not simulated for out-of-line execution with a handler. Hence the uprobe of such instructions leads to kernel warnings in a loop as they are not explicitly checked and fall into INSN_GOOD categories. Other combined instructions like LDRAA and LDRBB can be probed. The issue of the combined branch instructions is fixed by adding group definitions of all such instructions and rejecting their probes. The instruction groups added are br_auth(braa, brab, braaz and brabz), blr_auth(blraa, blrab, blraaz and blrabz), ret_auth(retaa and retab) and eret_auth(eretaa and eretab). Warning log: WARNING: CPU: 0 PID: 156 at arch/arm64/kernel/probes/uprobes.c:182 uprobe_single_step_handler+0x34/0x50 Modules linked in: CPU: 0 PID: 156 Comm: func Not tainted 5.9.0-rc3 torvalds#188 Hardware name: Foundation-v8A (DT) pstate: 804003c9 (Nzcv DAIF +PAN -UAO BTYPE=--) pc : uprobe_single_step_handler+0x34/0x50 lr : single_step_handler+0x70/0xf8 sp : ffff800012af3e30 x29: ffff800012af3e30 x28: ffff000878723b00 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000060001000 x22: 00000000cb000022 x21: ffff800012065ce8 x20: ffff800012af3ec0 x19: ffff800012068d50 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffff800010085c90 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff80001205a9c8 x5 : ffff80001205a000 x4 : ffff80001233db80 x3 : ffff8000100a7a60 x2 : 0020000000000003 x1 : 0000fffffffff008 x0 : ffff800012af3ec0 Call trace: uprobe_single_step_handler+0x34/0x50 single_step_handler+0x70/0xf8 do_debug_exception+0xb8/0x130 el0_sync_handler+0x138/0x1b8 el0_sync+0x158/0x180 Fixes: 74afda4 ("arm64: compile the kernel with ptrauth return address signing") Fixes: 04ca320 ("arm64: enable pointer authentication") Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://lore.kernel.org/r/20200914083656.21428-2-amit.kachhap@arm.com Signed-off-by: Will Deacon <will@kernel.org>

[ Upstream commit 9339693 ] Currently the ARMv8.3-PAuth combined branch instructions (braa, retaa etc.) are not simulated for out-of-line execution with a handler. Hence the uprobe of such instructions leads to kernel warnings in a loop as they are not explicitly checked and fall into INSN_GOOD categories. Other combined instructions like LDRAA and LDRBB can be probed. The issue of the combined branch instructions is fixed by adding group definitions of all such instructions and rejecting their probes. The instruction groups added are br_auth(braa, brab, braaz and brabz), blr_auth(blraa, blrab, blraaz and blrabz), ret_auth(retaa and retab) and eret_auth(eretaa and eretab). Warning log: WARNING: CPU: 0 PID: 156 at arch/arm64/kernel/probes/uprobes.c:182 uprobe_single_step_handler+0x34/0x50 Modules linked in: CPU: 0 PID: 156 Comm: func Not tainted 5.9.0-rc3 torvalds#188 Hardware name: Foundation-v8A (DT) pstate: 804003c9 (Nzcv DAIF +PAN -UAO BTYPE=--) pc : uprobe_single_step_handler+0x34/0x50 lr : single_step_handler+0x70/0xf8 sp : ffff800012af3e30 x29: ffff800012af3e30 x28: ffff000878723b00 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000060001000 x22: 00000000cb000022 x21: ffff800012065ce8 x20: ffff800012af3ec0 x19: ffff800012068d50 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffff800010085c90 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff80001205a9c8 x5 : ffff80001205a000 x4 : ffff80001233db80 x3 : ffff8000100a7a60 x2 : 0020000000000003 x1 : 0000fffffffff008 x0 : ffff800012af3ec0 Call trace: uprobe_single_step_handler+0x34/0x50 single_step_handler+0x70/0xf8 do_debug_exception+0xb8/0x130 el0_sync_handler+0x138/0x1b8 el0_sync+0x158/0x180 Fixes: 74afda4 ("arm64: compile the kernel with ptrauth return address signing") Fixes: 04ca320 ("arm64: enable pointer authentication") Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://lore.kernel.org/r/20200914083656.21428-2-amit.kachhap@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

BugLink: https://bugs.launchpad.net/bugs/1902137 [ Upstream commit 9339693 ] Currently the ARMv8.3-PAuth combined branch instructions (braa, retaa etc.) are not simulated for out-of-line execution with a handler. Hence the uprobe of such instructions leads to kernel warnings in a loop as they are not explicitly checked and fall into INSN_GOOD categories. Other combined instructions like LDRAA and LDRBB can be probed. The issue of the combined branch instructions is fixed by adding group definitions of all such instructions and rejecting their probes. The instruction groups added are br_auth(braa, brab, braaz and brabz), blr_auth(blraa, blrab, blraaz and blrabz), ret_auth(retaa and retab) and eret_auth(eretaa and eretab). Warning log: WARNING: CPU: 0 PID: 156 at arch/arm64/kernel/probes/uprobes.c:182 uprobe_single_step_handler+0x34/0x50 Modules linked in: CPU: 0 PID: 156 Comm: func Not tainted 5.9.0-rc3 #188 Hardware name: Foundation-v8A (DT) pstate: 804003c9 (Nzcv DAIF +PAN -UAO BTYPE=--) pc : uprobe_single_step_handler+0x34/0x50 lr : single_step_handler+0x70/0xf8 sp : ffff800012af3e30 x29: ffff800012af3e30 x28: ffff000878723b00 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000060001000 x22: 00000000cb000022 x21: ffff800012065ce8 x20: ffff800012af3ec0 x19: ffff800012068d50 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffff800010085c90 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff80001205a9c8 x5 : ffff80001205a000 x4 : ffff80001233db80 x3 : ffff8000100a7a60 x2 : 0020000000000003 x1 : 0000fffffffff008 x0 : ffff800012af3ec0 Call trace: uprobe_single_step_handler+0x34/0x50 single_step_handler+0x70/0xf8 do_debug_exception+0xb8/0x130 el0_sync_handler+0x138/0x1b8 el0_sync+0x158/0x180 Fixes: 74afda4 ("arm64: compile the kernel with ptrauth return address signing") Fixes: 04ca320 ("arm64: enable pointer authentication") Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://lore.kernel.org/r/20200914083656.21428-2-amit.kachhap@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>

Update 5.4-2.2.x-imx to v5.4.82

Fix checkpatch warnings: WARNING: Use #include <linux/io.h> instead of <asm/io.h> torvalds#38: FILE: drivers/tty/serial/sunzilog.c:38: +#include <asm/io.h> WARNING: line over 80 characters torvalds#109: FILE: drivers/tty/serial/sunzilog.c:109: +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) WARNING: line over 80 characters torvalds#116: FILE: drivers/tty/serial/sunzilog.c:116: +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) WARNING: line over 80 characters torvalds#179: FILE: drivers/tty/serial/sunzilog.c:179: +static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) WARNING: Missing a blank line after declarations torvalds#188: FILE: drivers/tty/serial/sunzilog.c:188: + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) ERROR: trailing whitespace torvalds#231: FILE: drivers/tty/serial/sunzilog.c:231: +^I$ WARNING: braces {} are not necessary for any arm of this statement torvalds#276: FILE: drivers/tty/serial/sunzilog.c:276: + if (ZS_TX_ACTIVE(up)) { [...] + } else { [...] ERROR: else should follow close brace '}' torvalds#378: FILE: drivers/tty/serial/sunzilog.c:378: + } + else if (r1 & PAR_ERR) ERROR: code indent should use tabs where possible torvalds#397: FILE: drivers/tty/serial/sunzilog.c:397: +^I^I ^Itty_insert_flip_char(port, ch, flag);$ WARNING: please, no space before tabs torvalds#397: FILE: drivers/tty/serial/sunzilog.c:397: +^I^I ^Itty_insert_flip_char(port, ch, flag);$ WARNING: line over 80 characters torvalds#440: FILE: drivers/tty/serial/sunzilog.c:440: + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. WARNING: line over 80 characters torvalds#441: FILE: drivers/tty/serial/sunzilog.c:441: + * But it does not tell us which bit has changed, we have to keep WARNING: Missing a blank line after declarations torvalds#464: FILE: drivers/tty/serial/sunzilog.c:464: + unsigned char status = readb(&channel->control); + ZSDELAY(); WARNING: line over 80 characters torvalds#468: FILE: drivers/tty/serial/sunzilog.c:468: + * It can occur because of how we do serial console writes. It would WARNING: line over 80 characters torvalds#469: FILE: drivers/tty/serial/sunzilog.c:469: + * be nice to transmit console writes just like we normally would for WARNING: line over 80 characters torvalds#470: FILE: drivers/tty/serial/sunzilog.c:470: + * a TTY line. (ie. buffered and TX interrupt driven). That is not WARNING: line over 80 characters torvalds#471: FILE: drivers/tty/serial/sunzilog.c:471: + * easy because console writes cannot sleep. One solution might be WARNING: line over 80 characters torvalds#593: FILE: drivers/tty/serial/sunzilog.c:593: +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) WARNING: plain inline is preferred over __inline__ torvalds#593: FILE: drivers/tty/serial/sunzilog.c:593: +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) ERROR: trailing whitespace torvalds#664: FILE: drivers/tty/serial/sunzilog.c:664: +^I/* NOTE: Not subject to 'transmitter active' rule. */ $ ERROR: trailing whitespace torvalds#752: FILE: drivers/tty/serial/sunzilog.c:752: +^I^I/* NOTE: Not subject to 'transmitter active' rule. */ $ ERROR: trailing whitespace torvalds#779: FILE: drivers/tty/serial/sunzilog.c:779: +^I^I/* NOTE: Not subject to 'transmitter active' rule. */ $ WARNING: line over 80 characters torvalds#999: FILE: drivers/tty/serial/sunzilog.c:999: +static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) WARNING: Missing a blank line after declarations #1142: FILE: drivers/tty/serial/sunzilog.c:1142: + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... #1230: FILE: drivers/tty/serial/sunzilog.c:1230: + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", WARNING: braces {} are not necessary for single statement blocks #1383: FILE: drivers/tty/serial/sunzilog.c:1383: + if (__load_zsregs(channel, up->curregs)) { + up->flags |= SUNZILOG_FLAG_ESCC; + } WARNING: quoted string split across lines #1493: FILE: drivers/tty/serial/sunzilog.c:1493: + dev_info(&op->dev, "Keyboard at MMIO 0x%llx (irq = %d) " + "is a %s\n", WARNING: quoted string split across lines #1497: FILE: drivers/tty/serial/sunzilog.c:1497: + dev_info(&op->dev, "Mouse at MMIO 0x%llx (irq = %d) " + "is a %s\n", WARNING: Missing a blank line after declarations #1581: FILE: drivers/tty/serial/sunzilog.c:1581: + struct uart_sunzilog_port *up = sunzilog_irq_chain; + err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, WARNING: line over 80 characters #1590: FILE: drivers/tty/serial/sunzilog.c:1590: + /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ WARNING: line over 80 characters #1627: FILE: drivers/tty/serial/sunzilog.c:1627: + /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ ERROR: trailing statements should be on next line #1248: FILE: drivers/tty/serial/sunzilog.c:1248: + case B150: baud = 150; break; ERROR: trailing statements should be on next line #1249: FILE: drivers/tty/serial/sunzilog.c:1249: + case B300: baud = 300; break; ERROR: trailing statements should be on next line #1250: FILE: drivers/tty/serial/sunzilog.c:1250: + case B600: baud = 600; break; ERROR: trailing statements should be on next line #1251: FILE: drivers/tty/serial/sunzilog.c:1251: + case B1200: baud = 1200; break; ERROR: trailing statements should be on next line #1252: FILE: drivers/tty/serial/sunzilog.c:1252: + case B2400: baud = 2400; break; ERROR: trailing statements should be on next line #1253: FILE: drivers/tty/serial/sunzilog.c:1253: + case B4800: baud = 4800; break; ERROR: trailing statements should be on next line #1254: FILE: drivers/tty/serial/sunzilog.c:1254: + default: case B9600: baud = 9600; break; ERROR: trailing statements should be on next line #1255: FILE: drivers/tty/serial/sunzilog.c:1255: + case B19200: baud = 19200; break; ERROR: trailing statements should be on next line #1256: FILE: drivers/tty/serial/sunzilog.c:1256: + case B38400: baud = 38400; break; Signed-off-by: Enrico Weigelt <info@metux.net>

…from PLSDK-3015 to processor-sdk-linux-4.19.y * commit '48a83f4a2412c8b23e1944170c5f44ab953e29b7': Revert "dt-bindings: net: ti,icssg-prueth: update for using icssg pair" Revert "dt-bindings: net: ti,icssg-prueth: update to clarify dual icssg usage" Revert "net: ti: icssg_prueth: Enhance the driver to support an icssg pair" Revert "arm64: dts: k3-am654-idk: add an overlay to support interposer card"

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#57: FILE: ./hal/HalPhyRf_8723B.c:57: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#138: FILE: ./hal/HalPhyRf_8723B.c:138: +static void setCCKFilterCoefficient(struct DM_ODM_T * pDM_Odm, u8 CCKSwingIndex) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#162: FILE: ./hal/HalPhyRf_8723B.c:162: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#188: FILE: ./hal/HalPhyRf_8723B.c:188: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#363: FILE: ./hal/HalPhyRf_8723B.c:363: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#371: FILE: ./hal/HalPhyRf_8723B.c:371: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#412: FILE: ./hal/HalPhyRf_8723B.c:412: +void ConfigureTxpowerTrack_8723B(struct TXPWRTRACK_CFG * pConfig) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#440: FILE: ./hal/HalPhyRf_8723B.c:440: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#551: FILE: ./hal/HalPhyRf_8723B.c:551: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#765: FILE: ./hal/HalPhyRf_8723B.c:765: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#872: FILE: ./hal/HalPhyRf_8723B.c:872: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#1095: FILE: ./hal/HalPhyRf_8723B.c:1095: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#1097: FILE: ./hal/HalPhyRf_8723B.c:1097: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1175: FILE: ./hal/HalPhyRf_8723B.c:1175: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1177: FILE: ./hal/HalPhyRf_8723B.c:1177: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1250: FILE: ./hal/HalPhyRf_8723B.c:1250: +void ODM_SetIQCbyRFpath(struct DM_ODM_T * pDM_Odm, u32 RFpath) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1253: FILE: ./hal/HalPhyRf_8723B.c:1253: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1295: FILE: ./hal/HalPhyRf_8723B.c:1295: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1313: FILE: ./hal/HalPhyRf_8723B.c:1313: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1333: FILE: ./hal/HalPhyRf_8723B.c:1333: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1363: FILE: ./hal/HalPhyRf_8723B.c:1363: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1387: FILE: ./hal/HalPhyRf_8723B.c:1387: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1492: FILE: ./hal/HalPhyRf_8723B.c:1492: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1700: FILE: ./hal/HalPhyRf_8723B.c:1700: +static void phy_LCCalibrate_8723B(struct DM_ODM_T * pDM_Odm, bool is2T) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1787: FILE: ./hal/HalPhyRf_8723B.c:1787: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1833: FILE: ./hal/HalPhyRf_8723B.c:1833: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2041: FILE: ./hal/HalPhyRf_8723B.c:2041: +void PHY_LCCalibrate_8723B(struct DM_ODM_T * pDM_Odm) Signed-off-by: Marco Cesati <marcocesati@gmail.com>

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#57: FILE: ./hal/HalPhyRf_8723B.c:57: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#138: FILE: ./hal/HalPhyRf_8723B.c:138: +static void setCCKFilterCoefficient(struct DM_ODM_T * pDM_Odm, u8 CCKSwingIndex) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#162: FILE: ./hal/HalPhyRf_8723B.c:162: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#188: FILE: ./hal/HalPhyRf_8723B.c:188: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#363: FILE: ./hal/HalPhyRf_8723B.c:363: + struct DM_ODM_T * pDM_Odm, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#371: FILE: ./hal/HalPhyRf_8723B.c:371: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#412: FILE: ./hal/HalPhyRf_8723B.c:412: +void ConfigureTxpowerTrack_8723B(struct TXPWRTRACK_CFG * pConfig) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#440: FILE: ./hal/HalPhyRf_8723B.c:440: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#551: FILE: ./hal/HalPhyRf_8723B.c:551: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#765: FILE: ./hal/HalPhyRf_8723B.c:765: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#872: FILE: ./hal/HalPhyRf_8723B.c:872: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#1095: FILE: ./hal/HalPhyRf_8723B.c:1095: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#1097: FILE: ./hal/HalPhyRf_8723B.c:1097: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1175: FILE: ./hal/HalPhyRf_8723B.c:1175: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1177: FILE: ./hal/HalPhyRf_8723B.c:1177: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1250: FILE: ./hal/HalPhyRf_8723B.c:1250: +void ODM_SetIQCbyRFpath(struct DM_ODM_T * pDM_Odm, u32 RFpath) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1253: FILE: ./hal/HalPhyRf_8723B.c:1253: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1295: FILE: ./hal/HalPhyRf_8723B.c:1295: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1313: FILE: ./hal/HalPhyRf_8723B.c:1313: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1333: FILE: ./hal/HalPhyRf_8723B.c:1333: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1363: FILE: ./hal/HalPhyRf_8723B.c:1363: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1387: FILE: ./hal/HalPhyRf_8723B.c:1387: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1492: FILE: ./hal/HalPhyRf_8723B.c:1492: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1700: FILE: ./hal/HalPhyRf_8723B.c:1700: +static void phy_LCCalibrate_8723B(struct DM_ODM_T * pDM_Odm, bool is2T) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1787: FILE: ./hal/HalPhyRf_8723B.c:1787: + struct DM_ODM_T * pDM_Odm = &pHalData->odmpriv; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1833: FILE: ./hal/HalPhyRf_8723B.c:1833: + struct ODM_RF_CAL_T * pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2041: FILE: ./hal/HalPhyRf_8723B.c:2041: +void PHY_LCCalibrate_8723B(struct DM_ODM_T * pDM_Odm) Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marco Cesati <marcocesati@gmail.com> Link: https://lore.kernel.org/r/20210315170618.2566-16-marcocesati@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Export everything as GPL

In this patch - 1) Add a new prog "for_each_helper" which tests the basic functionality of the bpf_for_each helper. 2) Add pyperf600_foreach and strobemeta_foreach to test the performance of using bpf_for_each instead of a for loop The results of pyperf600 and strobemeta are as follows: ~strobemeta~ Baseline verification time 6808200 usec stack depth 496 processed 592132 insns (limit 1000000) max_states_per_insn 14 total_states 16018 peak_states 13684 mark_read 3132 torvalds#188 verif_scale_strobemeta:OK (unrolled loop) Using bpf_for_each verification time 31589 usec stack depth 96+408 processed 1630 insns (limit 1000000) max_states_per_insn 4 total_states 107 peak_states 107 mark_read 60 torvalds#189 verif_scale_strobemeta_foreach:OK ~pyperf600~ Baseline verification time 29702486 usec stack depth 368 processed 626838 insns (limit 1000000) max_states_per_insn 7 total_states 30368 peak_states 30279 mark_read 748 torvalds#182 verif_scale_pyperf600:OK (unrolled loop) Using bpf_for_each verification time 148488 usec stack depth 320+40 processed 10518 insns (limit 1000000) max_states_per_insn 10 total_states 705 peak_states 517 mark_read 38 torvalds#183 verif_scale_pyperf600_foreach:OK Using the bpf_for_each helper led to approximately a 100% decrease in the verification time and in the number of instructions. Signed-off-by: Joanne Koong <joannekoong@fb.com>

Fix USB IRQ handler initialization. Setting always-on on boost regulator generates a fault. Unable to handle kernel NULL pointer dereference at virtual address 0000004c pgd = 54d71286 [0000004c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 72 Comm: irq/70-pmic_irq Not tainted 5.15.67ppav4.0 torvalds#188 Hardware name: STM32 (Device Tree Support) PC is at blocking_notifier_call_chain+0x4/0x90 LR is at regulator_notifier_call_chain+0xc/0x14 ... (blocking_notifier_call_chain) from [<c062b368>] (regulator_notifier_call_chain+0xc/0x14) (regulator_notifier_call_chain) from [<c0644a9c>] (stpmic1_boost_irq_handler+0x4c/0x84) (stpmic1_boost_irq_handler) from [<c017fbc0>] (handle_nested_irq+0xc8/0x12c) (handle_nested_irq) from [<c07160b0>] (regmap_irq_thread+0x46c/0x6d4) (regmap_irq_thread) from [<c017c2dc>] (irq_thread_fn+0x1c/0x7c) (irq_thread_fn) from [<c017c0bc>] (irq_thread+0x150/0x224) (irq_thread) from [<c0147874>] (kthread+0x14c/0x164) (kthread) from [<c0100130>] (ret_from_fork+0x14/0x24) Signed-off-by: Pascal Paillet <p.paillet@st.com> Change-Id: I23d72d24d2de029c516f4568dc518917cb2b95ca Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/312297 Reviewed-by: Patrick DELAUNAY <patrick.delaunay@foss.st.com> ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com> ACI: CIBUILD <MDG-smet-aci-builds@list.st.com> Domain-Review: Patrick DELAUNAY <patrick.delaunay@foss.st.com>

arm: dts: radxa cm3 rpi cm4 io: fix the issue that an error occurred …

Recently we got several deadlock report[1][2][3] caused by blk_mq_freeze_queue and blk_enter_queue(). Turns out the two are just like one rwsem, so model them as rwsem for supporting lockdep: 1) model blk_mq_freeze_queue() as down_write_trylock() - it is exclusive lock, so dependency with blk_enter_queue() is covered - it is trylock because blk_mq_freeze_queue() are allowed to run concurrently 2) model blk_enter_queue() as down_read() - it is shared lock, so concurrent blk_enter_queue() are allowed - it is read lock, so dependency with blk_mq_freeze_queue() is modeled - blk_queue_exit() is often called from other contexts(such as irq), and it can't be annotated as rwsem_release(), so simply do it in blk_enter_queue(), this way still covered cases as many as possible NVMe is the only subsystem which may call blk_mq_freeze_queue() and blk_mq_unfreeze_queue() from different context, so it is the only exception for the modeling. Add one tagset flag to exclude it from the lockdep support. With lockdep support, such kind of reports may be reported asap and needn't wait until the real deadlock is triggered. For example, the following lockdep report can be triggered in the report[3]. [ 45.701432] ====================================================== [ 45.702621] WARNING: possible circular locking dependency detected [ 45.703829] 6.12.0-rc1_uring_dev+ torvalds#188 Not tainted [ 45.704806] ------------------------------------------------------ [ 45.705903] bash/1323 is trying to acquire lock: [ 45.706153] ffff88813e075870 (&q->limits_lock){+.+.}-{3:3}, at: queue_wc_store+0x11c/0x380 [ 45.706602] but task is already holding lock: [ 45.706927] ffff88813e075730 (&q->sysfs_lock){+.+.}-{3:3}, at: queue_attr_store+0xd9/0x170 [ 45.707391] which lock already depends on the new lock. [ 45.707838] the existing dependency chain (in reverse order) is: [ 45.708238] -> #2 (&q->sysfs_lock){+.+.}-{3:3}: [ 45.708558] __mutex_lock+0x177/0x10d0 [ 45.708797] queue_attr_store+0xd9/0x170 [ 45.709039] kernfs_fop_write_iter+0x39f/0x5a0 [ 45.709304] vfs_write+0x5d3/0xe80 [ 45.709514] ksys_write+0xfb/0x1d0 [ 45.709723] do_syscall_64+0x95/0x180 [ 45.709946] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 45.710256] -> #1 (q->q_usage_counter){++++}-{0:0}: [ 45.710589] blk_try_enter_queue+0x32/0x340 [ 45.710842] blk_queue_enter+0x97/0x4c0 [ 45.711080] blk_mq_alloc_request+0x347/0x900 [ 45.711340] scsi_execute_cmd+0x183/0xc20 [ 45.711584] read_capacity_16+0x1ce/0xbb0 [ 45.711823] sd_revalidate_disk.isra.0+0xf78/0x8b40 [ 45.712119] sd_probe+0x813/0xf40 [ 45.712320] really_probe+0x1e0/0x8a0 [ 45.712542] __driver_probe_device+0x18c/0x370 [ 45.712801] driver_probe_device+0x4a/0x120 [ 45.713053] __device_attach_driver+0x162/0x270 [ 45.713327] bus_for_each_drv+0x115/0x1a0 [ 45.713572] __device_attach_async_helper+0x1a0/0x240 [ 45.713872] async_run_entry_fn+0x97/0x4f0 [ 45.714127] process_one_work+0x85d/0x1430 [ 45.714377] worker_thread+0x5be/0xff0 [ 45.714610] kthread+0x293/0x350 [ 45.714811] ret_from_fork+0x31/0x70 [ 45.715032] ret_from_fork_asm+0x1a/0x30 [ 45.715667] -> #0 (&q->limits_lock){+.+.}-{3:3}: [ 45.716819] __lock_acquire+0x310a/0x6060 [ 45.717476] lock_acquire.part.0+0x122/0x360 [ 45.718133] __mutex_lock+0x177/0x10d0 [ 45.718759] queue_wc_store+0x11c/0x380 [ 45.719384] queue_attr_store+0xff/0x170 [ 45.720007] kernfs_fop_write_iter+0x39f/0x5a0 [ 45.720647] vfs_write+0x5d3/0xe80 [ 45.721252] ksys_write+0xfb/0x1d0 [ 45.721847] do_syscall_64+0x95/0x180 [ 45.722433] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 45.723085] other info that might help us debug this: [ 45.724532] Chain exists of: &q->limits_lock --> q->q_usage_counter --> &q->sysfs_lock [ 45.726122] Possible unsafe locking scenario: [ 45.727114] CPU0 CPU1 [ 45.727687] ---- ---- [ 45.728270] lock(&q->sysfs_lock); [ 45.728792] lock(q->q_usage_counter); [ 45.729466] lock(&q->sysfs_lock); [ 45.730119] lock(&q->limits_lock); [ 45.730655] *** DEADLOCK *** [ 45.731983] 5 locks held by bash/1323: [ 45.732524] #0: ffff88811a4a0450 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xfb/0x1d0 [ 45.733290] #1: ffff88811fa35890 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x25d/0x5a0 [ 45.734113] #2: ffff888118e9fc20 (kn->active#133){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x281/0x5a0 [ 45.734939] #3: ffff88813e0751e0 (q->q_usage_counter){++++}-{0:0}, at: blk_mq_freeze_queue+0x12/0x20 [ 45.735797] #4: ffff88813e075730 (&q->sysfs_lock){+.+.}-{3:3}, at: queue_attr_store+0xd9/0x170 [ 45.736626] stack backtrace: [ 45.737598] CPU: 9 UID: 0 PID: 1323 Comm: bash Not tainted 6.12.0-rc1_uring_dev+ torvalds#188 [ 45.738388] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 [ 45.739222] Call Trace: [ 45.739762] <TASK> [ 45.740309] dump_stack_lvl+0x84/0xd0 [ 45.740962] print_circular_bug.cold+0x1e4/0x278 [ 45.741628] check_noncircular+0x331/0x410 [ 45.742289] ? __pfx_check_noncircular+0x10/0x10 [ 45.742933] ? lock_release+0x588/0xcc0 [ 45.743536] ? lockdep_lock+0xbe/0x1c0 [ 45.744156] ? __pfx_lockdep_lock+0x10/0x10 [ 45.744785] ? is_bpf_text_address+0x21/0x100 [ 45.745442] __lock_acquire+0x310a/0x6060 [ 45.746088] ? __pfx___lock_acquire+0x10/0x10 [ 45.746735] ? __pfx___bfs+0x10/0x10 [ 45.747325] lock_acquire.part.0+0x122/0x360 [ 45.747947] ? queue_wc_store+0x11c/0x380 [ 45.748564] ? __pfx_lock_acquire.part.0+0x10/0x10 [ 45.749254] ? trace_lock_acquire+0x12f/0x1a0 [ 45.749903] ? queue_wc_store+0x11c/0x380 [ 45.750545] ? lock_acquire+0x2f/0xb0 [ 45.751168] ? queue_wc_store+0x11c/0x380 [ 45.751777] __mutex_lock+0x177/0x10d0 [ 45.752379] ? queue_wc_store+0x11c/0x380 [ 45.752988] ? queue_wc_store+0x11c/0x380 [ 45.753586] ? __pfx___mutex_lock+0x10/0x10 [ 45.754202] ? __pfx___lock_acquire+0x10/0x10 [ 45.754823] ? lock_acquire.part.0+0x122/0x360 [ 45.755456] ? queue_wc_store+0x11c/0x380 [ 45.756063] queue_wc_store+0x11c/0x380 [ 45.756653] ? __pfx_lock_acquired+0x10/0x10 [ 45.757305] ? lock_acquire+0x2f/0xb0 [ 45.757904] ? trace_contention_end+0xd4/0x110 [ 45.758524] ? __pfx_queue_wc_store+0x10/0x10 [ 45.759172] ? queue_attr_store+0xd9/0x170 [ 45.759899] ? __pfx_autoremove_wake_function+0x10/0x10 [ 45.760587] queue_attr_store+0xff/0x170 [ 45.761213] ? sysfs_kf_write+0x41/0x170 [ 45.761823] ? __pfx_sysfs_kf_write+0x10/0x10 [ 45.762461] kernfs_fop_write_iter+0x39f/0x5a0 [ 45.763109] vfs_write+0x5d3/0xe80 [ 45.763690] ? lockdep_hardirqs_on_prepare+0x274/0x3f0 [ 45.764368] ? __pfx_vfs_write+0x10/0x10 [ 45.764964] ksys_write+0xfb/0x1d0 [ 45.765544] ? __pfx_ksys_write+0x10/0x10 [ 45.766160] ? ksys_dup3+0xce/0x2b0 [ 45.766710] do_syscall_64+0x95/0x180 [ 45.767267] ? filp_close+0x1d/0x30 [ 45.767801] ? do_dup2+0x27c/0x4f0 [ 45.768334] ? syscall_exit_to_user_mode+0x97/0x290 [ 45.768930] ? lockdep_hardirqs_on_prepare+0x274/0x3f0 [ 45.769538] ? syscall_exit_to_user_mode+0x97/0x290 [ 45.770136] ? do_syscall_64+0xa1/0x180 [ 45.770665] ? clear_bhb_loop+0x25/0x80 [ 45.771206] ? clear_bhb_loop+0x25/0x80 [ 45.771735] ? clear_bhb_loop+0x25/0x80 [ 45.772261] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 45.772843] RIP: 0033:0x7f3b17be9984 [ 45.773363] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d c5 06 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 45.775131] RSP: 002b:00007fffaa975ba8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 45.775909] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f3b17be9984 [ 45.776672] RDX: 0000000000000005 RSI: 0000556af3758790 RDI: 0000000000000001 [ 45.777454] RBP: 00007fffaa975bd0 R08: 0000000000000073 R09: 00000000ffffffff [ 45.778251] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000005 [ 45.779039] R13: 0000556af3758790 R14: 00007f3b17cc35c0 R15: 00007f3b17cc0f00 [ 45.779822] </TASK> [1] occasional block layer hang when setting 'echo noop > /sys/block/sda/queue/scheduler' https://bugzilla.kernel.org/show_bug.cgi?id=219166 [2] del_gendisk() vs blk_queue_enter() race condition https://lore.kernel.org/linux-block/20241003085610.GK11458@google.com/ [3] queue_freeze & queue_enter deadlock in scsi https://lore.kernel.org/linux-block/ZxG38G9BuFdBpBHZ@fedora/T/#u Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com>

Antonius-git closed this May 27, 2015

alistair23 pushed a commit to alistair23/linux that referenced this pull request Jan 31, 2021

Merge pull request torvalds#188 from zandrey/5.4-2.2.x-imx

d834293

Update 5.4-2.2.x-imx to v5.4.82

ojeda added a commit to ojeda/linux that referenced this pull request Apr 13, 2021

Merge pull request torvalds#188 from ojeda/gpl

f8440e2

Export everything as GPL

RadxaStephen pushed a commit to RadxaStephen/linux that referenced this pull request Mar 6, 2024

Merge pull request torvalds#188 from nascs/Radxa_cm3_Rpi_cm4_io_dwmmc

de2eda5

arm: dts: radxa cm3 rpi cm4 io: fix the issue that an error occurred …

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Patch for LZ4 decompression bug #188

Patch for LZ4 decompression bug #188

Antonius-git commented May 27, 2015

Antonius-git commented May 27, 2015

Patch for LZ4 decompression bug #188

Patch for LZ4 decompression bug #188

Conversation

Antonius-git commented May 27, 2015

Antonius-git commented May 27, 2015