Tpetra,Intrepid2: Adding RUN_SERIAL to tests #7476

brian-kelley · 2020-06-03T22:22:46Z

These were timing out on RIDE PR testing. Even with Kokkos_ENABLE_DEBUG=ON, the Tpetra tests should take about 17 seconds each and the Intrepid2 test 0.8 seconds. So this won't increase the total time by much.

@trilinos/tpetra
@trilinos/intrepid2

Motivation

See test timeouts/discussion at #7464

Stakeholder Feedback

Testing

which were timing out on RIDE

bartlettroscoe

It would be a shame to force these tests to run one-at-at-time on systems where we can make them spread out over the multiple GPUs like 'waterman' and 'vortex' (see #6840).

But you can merge this for now and then I will work on #7112 so we can only set the RUN_SERIAL property for these test for just 'ride' in the PR build.

mperego · 2020-06-03T22:32:26Z

@brian-kelley Thanks for doing this, but I think we are going around the issue instead of addressing it. If you turn this off you might have other tests randomly timing out. Also we probably want to test their execution on Cuda. It really seems to be an issue with work load and using ctest -jN. @trilinos/framework .

brian-kelley · 2020-06-03T22:43:57Z

@mperego I agree this is just a bandaid over the problem, but it will only be temporary until we can put e.g.

set (TpetraCore_gemm_m_eq_2_MPI_1_RUN_SERIAL ON CACHE BOOL "Temporary serialization for CUDA PR testing to avoid timeouts")

in cmake/std/PullRequestLinuxCuda9.2TestingSettings.cmake. If we let the autotester run on this PR, we'll at least see if any tests still time out.

mperego · 2020-06-03T22:55:20Z

@mperego I agree this is just a bandaid over the problem, but it will only be temporary until we can put e.g.
set (TpetraCore_gemm_m_eq_2_MPI_1_RUN_SERIAL ON CACHE BOOL "Temporary serialization for CUDA PR testing to avoid timeouts")
in cmake/std/PullRequestLinuxCuda9.2TestingSettings.cmake. If we let the autotester run on this PR, we'll at least see if any tests still time out.

I see, thanks. B.t.w. we could probably run serially these tests :
https://github.com/trilinos/Trilinos/blob/develop/packages/intrepid2/unit-test/Projection/Cuda/CMakeLists.txt
They take long time, and timeouts increased significantly after I pushed those tests.

brian-kelley · 2020-06-03T23:04:50Z

@mperego Good call, 3 out of 4 of the Intrepid2_unit-test_Projection_Cuda_Test_InterpolationProjection tests took longer than 8 minutes:

Intrepid2 | Intrepid2_unit-test_Projection_Cuda_Test_InterpolationProjection_HEX_MPI_1 | Passed | 8m 21s 680ms | 8m 21s 680ms | Intrepid2 | Summary | 1
Intrepid2 | Intrepid2_unit-test_Projection_Cuda_Test_InterpolationProjection_QUAD_MPI_1 | Passed | 9m 4s 440ms | 9m 4s 440ms | Intrepid2 | Summary | 1
Intrepid2 | Intrepid2_unit-test_Projection_Cuda_Test_InterpolationProjection_TET_MPI_1 | Passed | 1m 17s | 1m 17s | Intrepid2 | Summary | 1
Intrepid2 | Intrepid2_unit-test_Projection_Cuda_Test_InterpolationProjection_TRI_MPI_1 | Passed | 8m 26s 700ms | 8m 26s 700ms | Intrepid2 | Summary | 1

On RIDE PR testing, these are in danger of timing out (taking 8-9 minutes, where the limit is 10 minutes).

mperego · 2020-06-03T23:11:24Z

Yeah, the HEX test is the really expensive one, followed by the TET one. The timings you see for the other two are really a consequence of running them in parallel.

brian-kelley · 2020-06-03T23:13:18Z

@mperego Should I only do HEX and TET in serial?

mperego · 2020-06-03T23:14:56Z

@mperego Should I only do HEX and TET in serial?

Yes, thanks.

trilinos-autotester · 2020-06-04T03:12:23Z

Status Flag 'Pre-Test Inspection' - Auto Inspected - Inspection Is Not Necessary for this Pull Request.

trilinos-autotester · 2020-06-04T03:31:41Z

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6909
Status: STARTED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6720
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 5145
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4992
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1181
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4477
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 852
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2600
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2611
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Using Repos:

Repo: TRILINOS (brian-kelley/Trilinos)

Pull Request Author: brian-kelley

trilinos-autotester · 2020-06-04T05:47:24Z

Status Flag 'Pull Request AutoTester' - Jenkins Testing: 1 or more Jobs FAILED

Note: Testing will normally be attempted again in approx. 2 Hrs 30 Mins. If a change to the PR source branch occurs, the testing will be attempted again on next available autotester run.

Pull Request Auto Testing has FAILED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6909
Status: PASSED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6720
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 5145
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4992
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1181
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4477
Status: FAILED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 852
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2600
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2611
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.8.4 # 6909 (click to expand)


C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_gcc_4.8.4-6909

Cur dir                  = /scratch/trilinos/jenkins/tr-test-8/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/tr-test-8/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

Binary dir               = /scratch/trilinos/jenkins/tr-test-8/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/tr-test-8/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxGCC4.8.4TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/tr-test-8/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/tr-test-8/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-8.novalocal&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_gcc_4.8.4-6909&field3=buildstamp&compare3=61&value3=20200604-0315-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_4.8.4-6909&field2=buildstamp&compare2=61&value2=20200604-0315-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_4.8.4-6909&field2=buildstamp&compare2=61&value2=20200604-0315-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

..................................................  Size: 300K

............................................. Size of output: 344K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 100K

..................................................  Size: 149K

..................................................  Size: 199K

..................................................  Size: 249K

..................................................  Size: 300K

..................................................  Size: 349K

..................................................  Size: 399K

..................................................  Size: 449K

..................................................  Size: 500K

..................................................  Size: 549K

..................................................  Size: 599K

..................................................  Size: 649K

..................................................  Size: 699K

..................................................  Size: 749K

..................................................  Size: 799K

..................................................  Size: 849K

..................................................  Size: 899K

.......................... Size of output: 926K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

linos-folder/Trilinos_pullrequest_gcc_4.8.4@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/tr-test-8/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #6909

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/4.8.4/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-8/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_intel_17.0.1 # 6720 (click to expand)


    ..................................................  Size: 13549K
    ..................................................  Size: 13599K
    ..................................................  Size: 13649K
    ..................................................  Size: 13699K
    ..................................................  Size: 13749K
    ..................................................  Size: 13800K
    ..................................................  Size: 13850K
    ..................................................  Size: 13900K
    ..................................................  Size: 13950K
    ..................................................  Size: 14000K
    ..................................................  Size: 14050K
    ..................................................  Size: 14100K
    ..................................................  Size: 14149K
    ..................................................  Size: 14199K
    ..................................................  Size: 14250K
    ..................................................  Size: 14300K
    ..................................................  Size: 14350K
    ..................................................  Size: 14400K
    ..................................................  Size: 14450K
    ..................................................  Size: 14499K
    ..................................................  Size: 14550K
    ..................................................  Size: 14600K
    ..................................................  Size: 14650K
    ..................................................  Size: 14700K
    ..................................................  Size: 14750K
    ..................................................  Size: 14800K
    ..................................................  Size: 14850K
    ..................................................  Size: 14900K
    ..................................................  Size: 14950K
    ..................................................  Size: 15000K
    ..................................................  Size: 15050K
    ..................................................  Size: 15100K
    ..................................................  Size: 15150K
    ..................................................  Size: 15200K
    ..................................................  Size: 15250K
    ..................................................  Size: 15299K
    ..................................................  Size: 15349K
    ..................................................  Size: 15399K
    ..................................................  Size: 15449K
    ..................................................  Size: 15499K
    ..................................................  Size: 15549K
    ..................................................  Size: 15599K
    ..................................................  Size: 15649K
    ..................................................  Size: 15699K
    ..................................................  Size: 15749K
    ..................................................  Size: 15800K
    ..................................................  Size: 15850K
    ..................................................  Size: 15900K
    ..................................................  Size: 15950K
    ..................................................  Size: 15999K
    ..................................................  Size: 16049K
    ..................................................  Size: 16099K
    ..................................................  Size: 16149K
    ..................................................  Size: 16199K
    ..................................................  Size: 16250K
    ..................................................  Size: 16300K
    ............................. Size of output: 16329K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/intel/17.0.1/mpich/3.2/parallel/include
MKL_LIB = /projects/sems/install/rhel6-x86_64/sems/compiler/intel/17.0.1/base/mkl/lib/intel64
MODULE_VERSION_STACK = 3.2.10
SEMS_MPICH_ROOT = /projects/sems/install/rhel6-x86_64/sems/compiler/intel/17.0.1/mpich/3.2
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.4.7
SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.6.6
SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/intel/17.0.1/mpich/3.2/parallel/lib
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_INTEL_LOCAL_PYTHON_VERSION = 2.6.6
SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/boost/1.63.0/intel/17.0.1/base/lib
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.4.7
SNLSYSTEM = cee
MPIF77 = mpif77
SEMS_HDF5_ROOT = /projects/sems/install/rhel6-x86_64/sems/tpl/hdf5/1.10.6/intel/17.0.1/mpich/3.2/parallel
SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/intel/17.0.1/mpich/3.2/nopthread_64bit_parallel/include
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/4.9.3:sems-intel/17.0.1:sems-mpich/3.2:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = icpc
PWD = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #6720
PULLREQUESTNUM = 7476
SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/intel/17.0.1/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.9.3_SERIAL # 5145 (click to expand)


  7) sems-hdf5/1.10.6/base
TRILINOS_DIR=/scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/commonTools/framework/../..
TRILINOS_SCRIPTS_DIR=/scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/commonTools/framework/../..
TRIBITS_DIR=/scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/commonTools/framework/../../cmake/tribits
TRILINOS_DIR=/scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/commonTools/framework/../..
TRILINOS_SCRIPTS_DIR=/scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/commonTools/framework/../..
TRIBITS_DIR=/scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/commonTools/framework/../../cmake/tribits

*** Generating set of Trilinos enables given modified packages from

*** git commit origin/develop to HEAD

A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-5145

Cur dir                  = /scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

Binary dir               = /scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxGCC4.9.3TestingSettingsSERIAL.cmake"

-C "/scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-2.novalocal&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-5145&field3=buildstamp&compare3=61&value3=20200604-0317-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-5145&field2=buildstamp&compare2=61&value2=20200604-0317-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-5145&field2=buildstamp&compare2=61&value2=20200604-0317-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

............................................. Size of output: 294K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

.................................... Size of output: 35K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

3/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-2/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0 # 4992 (click to expand)


Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_gcc_7.2.0-4992

Cur dir                  = /scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxGCC7.2.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-host-0.novalocal&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_gcc_7.2.0-4992&field3=buildstamp&compare3=61&value3=20200604-0319-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_7.2.0-4992&field2=buildstamp&compare2=61&value2=20200604-0319-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_7.2.0-4992&field2=buildstamp&compare2=61&value2=20200604-0319-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

..................................................  Size: 300K

.................................. Size of output: 333K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 149K

..................................................  Size: 199K

..................................................  Size: 249K

..................................................  Size: 299K

..................................................  Size: 349K

..................................................  Size: 399K

..................................................  Size: 449K

..................................................  Size: 499K

............................ Size of output: 527K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

s-folder/Trilinos_pullrequest_gcc_7.2.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #4992

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/7.2.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-0/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_8.3.0 # 1181 (click to expand)


C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_gcc_8.3.0-1181

Cur dir                  = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@2/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@2/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@2/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@2/Trilinos/cmake/std/PullRequestLinuxGCC8.3.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@2/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@2/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic166&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_gcc_8.3.0-1181&field3=buildstamp&compare3=61&value3=20200604-0322-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_8.3.0-1181&field2=buildstamp&compare2=61&value2=20200604-0322-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_8.3.0-1181&field2=buildstamp&compare2=61&value2=20200604-0322-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

..................................................  Size: 300K

.................................. Size of output: 333K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 149K

..................................................  Size: 199K

..................................................  Size: 249K

..................................................  Size: 299K

...................................... Size of output: 338K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

S_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.8.5

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.7.5

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/netcdf/4.7.3/gcc/8.3.0/openmpi/1.10.1/parallel/lib

GIT_BRANCH = origin/develop

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/boost/1.66.0/gcc/8.3.0/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel7-x86_64/sems/tpl/hdf5/1.10.6/gcc/8.3.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/scotch/6.0.3/gcc/8.3.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/8.3.0:sems-openmpi/1.10.1:sems-boost/1.66.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@2@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@2

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #1181

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/8.3.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@2/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_cuda_9.2 # 4477 (click to expand)


Build succeeded.
build submit error = 0
Starting testing step.
CMake Error at /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4/TFW_testing_single_configure_prototype/simple_testing.cmake:218 (message):
  Test failed with error -1
test submit error = 0

File upload submit error = 0

ride12 ride12 ride12 ride12 ride12 ride12

METIS_ROOT = /home/projects/ppc64le-pwr8/metis/5.0.1/gcc/7.2.0

NODE_OWNER_EMAIL = ceeadmin@sandia.gov

LSB_EXIT_PRE_ABORT = 99

TRILINOS_SOURCE_REPO = https://github.com/brian-kelley/Trilinos

PARMETIS_HOME = /home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

FC_VERSION = 7.2.0

LSB_JOBFILENAME = /ascldap/users/trilinos/.lsbatch/1591241215.4531

BLAS_ROOT = /home/projects/ppc64le-pwr8/netlib/3.8.0/gcc/7.2.0

GIT_CHECKOUT_DIR = Trilinos

LSB_AFFINITY_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1591241215.4531.hostAffinityFile

PARMETIS_ROOT = /home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

LSF_ENVDIR = /opt/lsf/conf

MPI_VENDOR = openmpi

PYTHON = /home/projects/ppc64le/python/2.7.12/bin/python

CXX_VENDOR = gcc

HDF5_ROOT = /home/projects/ppc64le-pwr8-nvidia/hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

HOSTTYPE = LINUXPPC64LE

SSH_CLIENT = 205.137.81.17 44298 22

JENKINS_URL = https://ascic-jenkins.sandia.gov/

LOGNAME = trilinos

LSF_LIM_API_NTRIES = 1

PATH = /ascldap/users/rabartl/install/white-ride/cmake-3.11.2/bin:/ascldap/users/rabartl/install/white-ride/ninja-1.8.2/bin:/home/projects/ppc64le/valgrind/3.12.0/bin:/home/projects/ppc64le/cmake/3.9.6/bin:/home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8/metis/5.0.1/gcc/7.2.0/bin:/home/projects/ppc64le-pwr8-nvidia/netcdf/4.6.1/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/pnetcdf-exo/1.9.0/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le/java/ibm/sdk/8.0.0/bin:/home/projects/ppc64le/papi/5.5.1/bin:/home/projects/ppc64le/gcc/7.2.0/bin:/home/projects/ppc64le/binutils/2.30.0/bin:/home/projects/ppc64le-pwr8-nvidia/cuda/9.2.88/bin:/home/projects/ppc64le/python/2.7.12/bin:/home/projects/ppc64le/git/2.10.1/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/etc:/usr/local/bin:/usr/bin:/opt/ibutils/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin

LSB_QUEUE = rhel7F

LSF_JOB_TIMESTAMP_VALUE = 1591241215

LSB_EXEC_HOSTTYPE = LINUXPPC64LE

GIT_PREVIOUS_SUCCESSFUL_COMMIT = 184c4901e4e6f47bb4c5495ccf2470fedfe48351

LSB_DJOB_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1591241215.4531.hostfile

no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov

LSF_LIBDIR = /opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/lib

CGNS_VERSION = 20180521

LSB_SUB_USER = trilinos

NODE_LABELS = ride-trilinos trilinos-ride

GIT_BRANCH_2 = origin/pull_request_changes

GIT_CHECKOUT_DIR_1 = TFW_single_configure_support_scripts

GIT_CHECKOUT_DIR_2 = TFW_testing_single_configure_prototype

JOB_OWNER_EMAIL = HRSwant@sandia.gov

PULLREQUEST_CDASH_TRACK = Pull Request

BUILD_ID = 4477

SBD_KRB5CCNAME_VAL =

LSB_RES_GET_FANOUT_INFO = Y

RUN_DISPLAY_URL = https://ascic-jenkins.sandia.gov/job/trilinos-folder/job/Trilinos_pullrequest_cuda_9.2/4477/display/redirect

JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov

LSB_BATCH_JID = 4531

MPI_HOME = /home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

SUPERLU_HOME = /home/projects/ppc64le-pwr8/superlu/4.3.0/gcc/7.2.0

F77_VENDOR = gcc

KRB5CCNAME = FILE:/tmp/krb5cc_91724_bqNHm8maFh

BINUTILS_VERSION = 2.30.0

GIT_BRANCH = origin/develop

CMAKE_ROOT = /home/projects/ppc64le/cmake/3.9.6

BOOST_ROOT = /home/projects/ppc64le-pwr8/boost/1.65.1/gcc/7.2.0

VALGRIND_ROOT = /home/projects/ppc64le/valgrind/3.12.0

MPIF77 = /home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin/mpif77

PARMETIS_VERSION = 4.0.3

LSB_JOBNAME = trilinos-folder/Trilinos_pullrequest_cuda_9.2

LOADEDMODULES = git/2.10.1:python/2.7.12:cuda/9.2.88:binutils/2.30.0:gcc/7.2.0:papi/5.5.1:java/ibm/sdk/8.0.0:openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:pnetcdf-exo/1.9.0/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:zlib/1.2.8:hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:netcdf/4.6.1/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:cgns/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:netlib/3.8.0/gcc/7.2.0:superlu/4.3.0/gcc/7.2.0:boost/1.65.1/gcc/7.2.0:metis/5.0.1/gcc/7.2.0:parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:cmake/3.9.6:valgrind/3.12.0:devpack/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

WORKSPACE_TMP = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4@tmp

GIT_BRANCH_1 = origin/master

CUDA_MANAGED_FORCE_DEVICE_ALLOC = 1

HISTCONTROL = ignoredups

PWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4

LS_EXECCWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #4477

CXX_VERSION = 7.2.0

PYTHON_ROOT = /home/projects/ppc64le/python/2.7.12

OMPI_CXX = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4/Trilinos/packages/kokkos/bin/nvcc_wrapper

SUPERLU_VERSION = 4.3.0

PULLREQUESTNUM = 7476

BINARY_TYPE_HPC =
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4/TFW_testing_single_configure_prototype

Traceback (most recent call last):

File "/home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 701, in 

returnValue = run()

File "/home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 694, in run

'-Dsubprojects_file=../package_subproject_list.cmake'])

File "/home/projects/ppc64le/python/2.7.12/lib/python2.7/subprocess.py", line 541, in check_call

raise CalledProcessError(retcode, cmd)

subprocess.CalledProcessError: Command '['ctest', '-S', 'simple_testing.cmake', '-Dbuild_name=PR-7476-test-Trilinos_pullrequest_cuda_9.2-4477', '-Dskip_by_parts_submit=OFF', '-Dskip_update_step=ON', '-Ddashboard_model=Experimental', '-Ddashboard_track=Pull Request', '-DPARALLEL_LEVEL=64', '-DTEST_PARALLEL_LEVEL=8', '-Dbuild_dir=/home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4/pull_request_test', '-Dconfigure_script=/home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@4/Trilinos/cmake/std/PullRequestLinuxCuda9.2TestingSettings.cmake', '-Dpackage_enables=../packageEnables.cmake', '-Dsubprojects_file=../package_subproject_list.cmake']' returned non-zero exit status 255

Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE

Console Output (last 100 lines) : Trilinos_pullrequest_clang_9.0.0 # 852 (click to expand)


git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_clang_9.0.0-852

Cur dir                  = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/pull_request_test

Parallel level           = 10

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.12.2/bin/cmake

-C "/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxClang9.0.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic141&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_clang_9.0.0-852&field3=buildstamp&compare3=61&value3=20200604-0327-Pull Request-Experimental

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_clang_9.0.0-852&field2=buildstamp&compare2=61&value2=20200604-0327-Pull Request-Experimental

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_clang_9.0.0-852&field2=buildstamp&compare2=61&value2=20200604-0327-Pull Request-Experimental

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

..................................................  Size: 300K

.............................. Size of output: 329K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

.......................... Size of output: 26K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.4.7

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.6.6

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/clang/9.0.0/openmpi/1.10.1/parallel/lib

GIT_URL = https://github.com/trilinos/Trilinos

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/boost/1.63.0/clang/9.0.0/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.4.7

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel6-x86_64/sems/tpl/hdf5/1.10.6/clang/9.0.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/clang/9.0.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/5.3.0:sems-clang/9.0.0:sems-openmpi/1.10.1:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.12.2:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@tmp

SEMS_CMAKE_VERSION = 3.12.2

HISTCONTROL = ignoredups

SERIAL_CXX = clang++

PWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #852

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/clang/9.0.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_python_2 # 2600 (click to expand)


HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = develop
https_proxy = http://wwwproxy.sandia.gov:80
F90 = gfortran
SERIAL_F90 = gfortran
SEMS_CMAKE_ROOT = /projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3
JOB_COOWNERS = prwolfe,trilinos
SERIAL_FC = gfortran
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 96f42756-2062-4413-ae62-a2181de823c4
ftp_proxy = http://wwwproxy.sandia.gov:80/
QT_GRAPHICSSYSTEM_CHECKED = 1
SEMS_NINJA_FORTRAN_LOCAL_COMPILER_VERSION = 4.8.5
F77 = gfortran
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
NODE_NAME = tr-test-4-trilinos
GIT_CHECKOUT_DIR = Trilinos
SEMS_NINJA_FORTRAN_VERSION = 1.7.2
SEMS_COMPILER_VERSION = 7.2.0
SSH_CLIENT = 205.137.81.17 57002 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-4-trilinos trilinos-32 trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_4
PATH = /projects/sierra/linux_rh7/install/Python/2.7.15/bin:/projects/sierra/linux_rh7/install/Python/extrasbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/sbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/bin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin:/projects/sems/install/rhel7-x86_64/sems/compiler/gcc/7.2.0/base/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
SEMS_NINJA_FORTRAN_LOCAL_PYTHON_VERSION = 2.7.5
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 184c4901e4e6f47bb4c5495ccf2470fedfe48351
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
CC = gcc
SEMS_CMAKE_LOCAL_COMPILER_VERSION = 4.8.5
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 2600
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-gcc/7.2.0:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKSCurrently Loaded Modulefiles:
  1) sems-env                   4) sems-cmake/3.10.3
  2) sems-git/2.10.1            5) atdm-env
  3) sems-gcc/7.2.0             6) atdm-ninja_fortran/1.7.2
Build name               = PR-7476-test-Trilinos_pullrequest_python_2-2600
Cur dir                  = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/TFW_testing_single_configure_prototype
Source dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos
Binary dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/pull_request_test
Parallel level           = 20
Testing Parallel level   = 20
skip_by_parts_submit     = OFF
skip_single_submit       = ON
skip_update_step         = ON
skip_upload_config_files = OFF
skip_clean_build_dir     = ON
Subproject count         = 1
Dashboard model          = Experimental
Dashboard track          = Pull Request
Running configuration:
/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake 
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos/cmake/std/PullRequestLinuxPython2.cmake"
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/packageEnables.cmake"
  -DTrilinos_ENABLE_TESTS:BOOL=ON
  -DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2
  -G "Ninja"
  /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos
CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos
CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-4.novalocal&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_python_2-2600&field3=buildstamp&compare3=61&value3=20200604-0329-Pull Request
CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_python_2-2600&field2=buildstamp&compare2=61&value2=20200604-0329-Pull Request
CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_python_2-2600&field2=buildstamp&compare2=61&value2=20200604-0329-Pull Request
Starting configure step.
   Each . represents 1024 bytes of output
    ...................... Size of output: 21K
configure submit error = 0
Configure suceeded.
Starting build step.
   Each symbol represents 1024 bytes of output.
    . Size of output: 0K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
PACE_TMP = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = g++
PWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2600
PULLREQUESTNUM = 7476
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_TrilinosFrameworkTests = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_python_3 # 2611 (click to expand)


HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = develop
https_proxy = http://wwwproxy.sandia.gov:80
F90 = gfortran
SERIAL_F90 = gfortran
SEMS_CMAKE_ROOT = /projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3
JOB_COOWNERS = prwolfe,trilinos
SERIAL_FC = gfortran
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 98ed4a3a-3846-436a-8795-0ad7b519e516
ftp_proxy = http://wwwproxy.sandia.gov:80/
QT_GRAPHICSSYSTEM_CHECKED = 1
SEMS_NINJA_FORTRAN_LOCAL_COMPILER_VERSION = 4.8.5
F77 = gfortran
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
NODE_NAME = tr-test-4-trilinos
GIT_CHECKOUT_DIR = Trilinos
SEMS_NINJA_FORTRAN_VERSION = 1.7.2
SEMS_COMPILER_VERSION = 7.2.0
SSH_CLIENT = 205.137.81.17 57002 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-4-trilinos trilinos-32 trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_4
PATH = /projects/sierra/linux_rh7/install/Python/3.6.3/bin:/projects/sierra/linux_rh7/install/Python/extrasbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/sbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/bin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin:/projects/sems/install/rhel7-x86_64/sems/compiler/gcc/7.2.0/base/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
SEMS_NINJA_FORTRAN_LOCAL_PYTHON_VERSION = 2.7.5
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 184c4901e4e6f47bb4c5495ccf2470fedfe48351
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
CC = gcc
SEMS_CMAKE_LOCAL_COMPILER_VERSION = 4.8.5
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 2611
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-gcc/7.2.0:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKSPACurrently Loaded Modulefiles:
  1) sems-env                   4) sems-cmake/3.10.3
  2) sems-git/2.10.1            5) atdm-env
  3) sems-gcc/7.2.0             6) atdm-ninja_fortran/1.7.2
Build name               = PR-7476-test-Trilinos_pullrequest_python_3-2611
Cur dir                  = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/TFW_testing_single_configure_prototype
Source dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos
Binary dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/pull_request_test
Parallel level           = 20
Testing Parallel level   = 20
skip_by_parts_submit     = OFF
skip_single_submit       = ON
skip_update_step         = ON
skip_upload_config_files = OFF
skip_clean_build_dir     = ON
Subproject count         = 1
Dashboard model          = Experimental
Dashboard track          = Pull Request
Running configuration:
/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake 
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos/cmake/std/PullRequestLinuxPython3.cmake"
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/packageEnables.cmake"
  -DTrilinos_ENABLE_TESTS:BOOL=ON
  -DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2
  -G "Ninja"
  /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos
CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos
CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-4.novalocal&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_python_3-2611&field3=buildstamp&compare3=61&value3=20200604-0331-Pull Request
CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_python_3-2611&field2=buildstamp&compare2=61&value2=20200604-0331-Pull Request
CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_python_3-2611&field2=buildstamp&compare2=61&value2=20200604-0331-Pull Request
Starting configure step.
   Each . represents 1024 bytes of output
    ...................... Size of output: 21K
configure submit error = 0
Configure suceeded.
Starting build step.
   Each symbol represents 1024 bytes of output.
    . Size of output: 0K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
CE_TMP = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = g++
PWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2611
PULLREQUESTNUM = 7476
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_TrilinosFrameworkTests = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

CDash Test Results for PR# 7476.

Wiki: How to Reproduce PR Testing Builds and Errors.

brian-kelley · 2020-06-04T05:50:35Z

@mperego You were right, running certain tests in serial just moved the timeout to a different test (MueLu_UnitTestsIntrepid2Tpetra_MPI_1). So we probably have to reduce the -j value for RIDE, rather than trying to play whack a mole with RUN_SERIAL on specific tests that may time out.

trilinos-autotester · 2020-06-04T11:02:30Z

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6912
Status: STARTED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6723
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 5148
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4995
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1184
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4480
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 855
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2602
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2613
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Using Repos:

Repo: TRILINOS (brian-kelley/Trilinos)

Pull Request Author: brian-kelley

trilinos-autotester · 2020-06-04T12:13:41Z

Status Flag 'Pull Request AutoTester' - Jenkins Testing: all Jobs PASSED

Pull Request Auto Testing has PASSED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6912
Status: PASSED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6723
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 5148
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4995
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1184
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4480
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 855
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2602
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2613
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`a39daa0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

CDash Test Results for PR# 7476.

trilinos-autotester · 2020-06-04T12:13:59Z

Status Flag 'Pre-Merge Inspection' - - This Pull Request Requires Inspection... The code must be inspected by a member of the Team before Testing/Merging
THE LAST COMMIT TO THIS PULL REQUEST HAS NOT BEEN REVIEWED YET!

trilinos-autotester · 2020-06-04T12:14:06Z

All Jobs Finished; status = PASSED, However Inspection must be performed before merge can occur...

mperego · 2020-06-04T14:20:17Z

@brian-kelley
Even when run serially, the tests timings change significantly:
Intrepid2_unit-test_Projection_Cuda_Test_InterpolationProjection_TET_MPI_1 took 7m 29s 280ms the first time and 5m 14s 880ms the second time.

I think I also was wrong.. the QUAD and TRI tests took also a long time, while they took less than 30s when I run it on ride serially. Maybe we should also run them serially, if we want to continue with this approach,.. and the MueLu_UnitTestsIntrepid2Tpetra_MPI_1, that test also has been timing out a lot lately.

etphipp · 2020-06-04T15:24:06Z

So is there a timeframe where this is expected to be resolved? Looking at all of the comments for this PR and #7464, it sure seems like there isn't. Some ideas:

Can we make timeouts non-failures?
The latest version of CTest has this option that could help:

--repeat <mode>:<n>

    Run tests repeatedly based on the given <mode> up to <n> times. The modes are:

    until-fail
        Require each test to run <n> times without failing in order to pass. This is useful in finding sporadic failures in test cases.

    until-pass
        Allow each test to run up to <n> times in order to pass. Repeats tests if they fail for any reason. This is useful in tolerating sporadic failures in test cases.

    after-timeout
        Allow each test to run up to <n> times in order to pass. Repeats tests only if they timeout. This is useful in tolerating sporadic timeouts in test cases on busy machines.

Otherwise, the only options I see are to start force-pushing PR's that are only being held up by timeouts, or shutting down PR testing on Ride altogether.

mperego · 2020-06-04T17:46:30Z

@brian-kelley, I would propose to use the RUN_SERIAL option also for

Intrepid2_unit-test_Projection_Cuda_Test_InterpolationProjection_QUAD_MPI_1`
Intrepid2_unit-test_Projection_Cuda_Test_InterpolationProjection_TRI_MPI_1
MueLu_UnitTestsIntrepid2Tpetra_MPI_1

This is of course a temporary solution but I think it will help the several PRs currently on hold.

@etphipp suggestion makes sense to me, but it would probably need to be discussed longer, and we have been on hold since several days now.

(for long-running tests)

brian-kelley · 2020-06-04T18:21:27Z

@mperego OK, I added those RUN_SERIALs.

@prwolfe has opened #7473 to move RIDE's PR testing to the Pascal nodes (rhel7F -> rhel7G), which have 2 GPUs each, and they are individually about twice as fast. Hopefully that will be a permanent fix for these timeouts, and if this gets merged first, we can just roll this back after #7473.

trilinos-autotester · 2020-06-04T18:34:01Z

Status Flag 'Pre-Test Inspection' - Auto Inspected - Inspection Is Not Necessary for this Pull Request.

trilinos-autotester · 2020-06-04T18:36:26Z

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6920
Status: STARTED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6731
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 5156
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 5003
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1192
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4488
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 863
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2609
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2620
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Using Repos:

Repo: TRILINOS (brian-kelley/Trilinos)

Pull Request Author: brian-kelley

trilinos-autotester · 2020-06-04T19:24:43Z

Status Flag 'Pull Request AutoTester' - Jenkins Testing: 1 or more Jobs FAILED

Note: Testing will normally be attempted again in approx. 2 Hrs 30 Mins. If a change to the PR source branch occurs, the testing will be attempted again on next available autotester run.

Pull Request Auto Testing has FAILED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6920
Status: PASSED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6731
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 5156
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 5003
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1192
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4488
Status: FAILED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 863
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2609
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2620
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`98f468a`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.8.4 # 6920 (click to expand)


*** git commit origin/develop to HEAD
***
A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,MueLu,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,MueLu,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_gcc_4.8.4-6920

Cur dir                  = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

Binary dir               = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxGCC4.8.4TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-7.novalocal&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_gcc_4.8.4-6920&field3=buildstamp&compare3=61&value3=20200604-1834-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_4.8.4-6920&field2=buildstamp&compare2=61&value2=20200604-1834-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_4.8.4-6920&field2=buildstamp&compare2=61&value2=20200604-1834-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

..................................................  Size: 300K

............................................. Size of output: 344K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

........................... Size of output: 26K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

_4.8.4@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #6920

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/4.8.4/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_MueLu = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_intel_17.0.1 # 6731 (click to expand)


C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,MueLu,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,MueLu,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_intel_17.0.1-6731

Cur dir                  = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxIntelTestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic158&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_intel_17.0.1-6731&field3=buildstamp&compare3=61&value3=20200604-1834-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_intel_17.0.1-6731&field2=buildstamp&compare2=61&value2=20200604-1834-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_intel_17.0.1-6731&field2=buildstamp&compare2=61&value2=20200604-1834-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

..................................................  Size: 300K

........................................... Size of output: 342K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

............................ Size of output: 28K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

/projects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/intel/17.0.1/mpich/3.2/parallel/include

MKL_LIB = /projects/sems/install/rhel6-x86_64/sems/compiler/intel/17.0.1/base/mkl/lib/intel64

MODULE_VERSION_STACK = 3.2.10

SEMS_MPICH_ROOT = /projects/sems/install/rhel6-x86_64/sems/compiler/intel/17.0.1/mpich/3.2

JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.4.7

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.6.6

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/intel/17.0.1/mpich/3.2/parallel/lib

GIT_URL = https://github.com/trilinos/Trilinos

SEMS_INTEL_LOCAL_PYTHON_VERSION = 2.6.6

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/boost/1.63.0/intel/17.0.1/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.4.7

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel6-x86_64/sems/tpl/hdf5/1.10.6/intel/17.0.1/mpich/3.2/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/intel/17.0.1/mpich/3.2/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/4.9.3:sems-intel/17.0.1:sems-mpich/3.2:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = icpc

PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #6731

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/intel/17.0.1/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_MueLu = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.9.3_SERIAL # 5156 (click to expand)


Current directory: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,MueLu,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,MueLu,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-5156

Cur dir                  = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxGCC4.9.3TestingSettingsSERIAL.cmake"

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic166&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-5156&field3=buildstamp&compare3=61&value3=20200604-1835-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-5156&field2=buildstamp&compare2=61&value2=20200604-1835-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-5156&field2=buildstamp&compare2=61&value2=20200604-1835-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

............................................. Size of output: 294K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

........................... Size of output: 26K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

jects/sems/install/rhel7-x86_64/sems/tpl/netcdf/4.7.3/gcc/4.9.3/base/include

MODULE_VERSION_STACK = 3.2.10

JOB_COOWNERS_EMAILS = wcmclen@sandia.gov,trilinos@sandia.gov

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/netcdf/4.7.3/gcc/4.9.3/base/lib

GIT_BRANCH = origin/develop

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/boost/1.63.0/gcc/4.9.3/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5

SNLSYSTEM = cee

SEMS_HDF5_ROOT = /projects/sems/install/rhel7-x86_64/sems/tpl/hdf5/1.10.6/gcc/4.9.3/base

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/4.9.3:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/base:sems-netcdf/4.7.3/base:sems-metis/5.1.0/base:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #5156

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/4.9.3/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_MueLu = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0 # 5003 (click to expand)


A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,MueLu,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,MueLu,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_gcc_7.2.0-5003

Cur dir                  = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/pull_request_test

Parallel level           = 13

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxGCC7.2.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic158&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_gcc_7.2.0-5003&field3=buildstamp&compare3=61&value3=20200604-1835-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_7.2.0-5003&field2=buildstamp&compare2=61&value2=20200604-1835-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_7.2.0-5003&field2=buildstamp&compare2=61&value2=20200604-1835-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

..................................................  Size: 300K

.................................. Size of output: 333K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

........................... Size of output: 26K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

l/hdf5/1.10.6/gcc/7.2.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/gcc/7.2.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/7.2.0:sems-openmpi/1.10.1:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #5003

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/gcc/7.2.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_MueLu = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_8.3.0 # 1192 (click to expand)


git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,MueLu,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,MueLu,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_gcc_8.3.0-1192

Cur dir                  = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxGCC8.3.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic166&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_gcc_8.3.0-1192&field3=buildstamp&compare3=61&value3=20200604-1835-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_8.3.0-1192&field2=buildstamp&compare2=61&value2=20200604-1835-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_gcc_8.3.0-1192&field2=buildstamp&compare2=61&value2=20200604-1835-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

..................................................  Size: 300K

.................................. Size of output: 333K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

........................... Size of output: 26K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

S = HRSwant@sandia.gov,trilinos@sandia.gov

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.8.5

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.7.5

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/netcdf/4.7.3/gcc/8.3.0/openmpi/1.10.1/parallel/lib

GIT_BRANCH = origin/develop

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/boost/1.66.0/gcc/8.3.0/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel7-x86_64/sems/tpl/hdf5/1.10.6/gcc/8.3.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/scotch/6.0.3/gcc/8.3.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/8.3.0:sems-openmpi/1.10.1:sems-boost/1.66.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #1192

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/8.3.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_MueLu = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_cuda_9.2 # 4488 (click to expand)


build submit error = 0
Starting testing step.
CMake Error at /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/TFW_testing_single_configure_prototype/simple_testing.cmake:218 (message):
  Test failed with error -1
test submit error = 0

File upload submit error = 0

3 ride13 ride13 ride13 ride13 ride13 ride13

METIS_ROOT = /home/projects/ppc64le-pwr8/metis/5.0.1/gcc/7.2.0

NODE_OWNER_EMAIL = ceeadmin@sandia.gov

LSB_EXIT_PRE_ABORT = 99

TRILINOS_SOURCE_REPO = https://github.com/brian-kelley/Trilinos

PARMETIS_HOME = /home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

FC_VERSION = 7.2.0

LSB_JOBFILENAME = /ascldap/users/trilinos/.lsbatch/1591295761.4550

BLAS_ROOT = /home/projects/ppc64le-pwr8/netlib/3.8.0/gcc/7.2.0

GIT_CHECKOUT_DIR = Trilinos

LSB_AFFINITY_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1591295761.4550.hostAffinityFile

PARMETIS_ROOT = /home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

LSF_ENVDIR = /opt/lsf/conf

MPI_VENDOR = openmpi

PYTHON = /home/projects/ppc64le/python/2.7.12/bin/python

CXX_VENDOR = gcc

HDF5_ROOT = /home/projects/ppc64le-pwr8-nvidia/hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

HOSTTYPE = LINUXPPC64LE

SSH_CLIENT = 205.137.81.17 44298 22

JENKINS_URL = https://ascic-jenkins.sandia.gov/

LOGNAME = trilinos

LSF_LIM_API_NTRIES = 1

PATH = /ascldap/users/rabartl/install/white-ride/cmake-3.11.2/bin:/ascldap/users/rabartl/install/white-ride/ninja-1.8.2/bin:/home/projects/ppc64le/valgrind/3.12.0/bin:/home/projects/ppc64le/cmake/3.9.6/bin:/home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8/metis/5.0.1/gcc/7.2.0/bin:/home/projects/ppc64le-pwr8-nvidia/netcdf/4.6.1/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/pnetcdf-exo/1.9.0/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le/java/ibm/sdk/8.0.0/bin:/home/projects/ppc64le/papi/5.5.1/bin:/home/projects/ppc64le/gcc/7.2.0/bin:/home/projects/ppc64le/binutils/2.30.0/bin:/home/projects/ppc64le-pwr8-nvidia/cuda/9.2.88/bin:/home/projects/ppc64le/python/2.7.12/bin:/home/projects/ppc64le/git/2.10.1/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/etc:/usr/local/bin:/usr/bin:/opt/ibutils/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin

LSB_QUEUE = rhel7F

LSF_JOB_TIMESTAMP_VALUE = 1591295762

LSB_EXEC_HOSTTYPE = LINUXPPC64LE

GIT_PREVIOUS_SUCCESSFUL_COMMIT = 184c4901e4e6f47bb4c5495ccf2470fedfe48351

LSB_DJOB_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1591295761.4550.hostfile

no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov

LSF_LIBDIR = /opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/lib

CGNS_VERSION = 20180521

LSB_SUB_USER = trilinos

NODE_LABELS = ride-trilinos trilinos-ride

GIT_BRANCH_2 = origin/pull_request_changes

GIT_CHECKOUT_DIR_1 = TFW_single_configure_support_scripts

GIT_CHECKOUT_DIR_2 = TFW_testing_single_configure_prototype

JOB_OWNER_EMAIL = HRSwant@sandia.gov

PULLREQUEST_CDASH_TRACK = Pull Request

BUILD_ID = 4488

SBD_KRB5CCNAME_VAL =

LSB_RES_GET_FANOUT_INFO = Y

RUN_DISPLAY_URL = https://ascic-jenkins.sandia.gov/job/trilinos-folder/job/Trilinos_pullrequest_cuda_9.2/4488/display/redirect

JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov

LSB_BATCH_JID = 4550

MPI_HOME = /home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

SUPERLU_HOME = /home/projects/ppc64le-pwr8/superlu/4.3.0/gcc/7.2.0

F77_VENDOR = gcc

KRB5CCNAME = FILE:/tmp/krb5cc_91724_bqNHm8maFh

BINUTILS_VERSION = 2.30.0

GIT_BRANCH = origin/develop

CMAKE_ROOT = /home/projects/ppc64le/cmake/3.9.6

BOOST_ROOT = /home/projects/ppc64le-pwr8/boost/1.65.1/gcc/7.2.0

VALGRIND_ROOT = /home/projects/ppc64le/valgrind/3.12.0

MPIF77 = /home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin/mpif77

PARMETIS_VERSION = 4.0.3

LSB_JOBNAME = trilinos-folder/Trilinos_pullrequest_cuda_9.2

LOADEDMODULES = git/2.10.1:python/2.7.12:cuda/9.2.88:binutils/2.30.0:gcc/7.2.0:papi/5.5.1:java/ibm/sdk/8.0.0:openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:pnetcdf-exo/1.9.0/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:zlib/1.2.8:hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:netcdf/4.6.1/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:cgns/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:netlib/3.8.0/gcc/7.2.0:superlu/4.3.0/gcc/7.2.0:boost/1.65.1/gcc/7.2.0:metis/5.0.1/gcc/7.2.0:parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:cmake/3.9.6:valgrind/3.12.0:devpack/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88

WORKSPACE_TMP = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3@tmp

GIT_BRANCH_1 = origin/master

CUDA_MANAGED_FORCE_DEVICE_ALLOC = 1

HISTCONTROL = ignoredups

PWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3

LS_EXECCWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #4488

CXX_VERSION = 7.2.0

PYTHON_ROOT = /home/projects/ppc64le/python/2.7.12

OMPI_CXX = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/packages/kokkos/bin/nvcc_wrapper

SUPERLU_VERSION = 4.3.0

PULLREQUESTNUM = 7476

BINARY_TYPE_HPC =
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_MueLu = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/TFW_testing_single_configure_prototype

Traceback (most recent call last):

File "/home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 701, in 

returnValue = run()

File "/home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 694, in run

'-Dsubprojects_file=../package_subproject_list.cmake'])

File "/home/projects/ppc64le/python/2.7.12/lib/python2.7/subprocess.py", line 541, in check_call

raise CalledProcessError(retcode, cmd)

subprocess.CalledProcessError: Command '['ctest', '-S', 'simple_testing.cmake', '-Dbuild_name=PR-7476-test-Trilinos_pullrequest_cuda_9.2-4488', '-Dskip_by_parts_submit=OFF', '-Dskip_update_step=ON', '-Ddashboard_model=Experimental', '-Ddashboard_track=Pull Request', '-DPARALLEL_LEVEL=64', '-DTEST_PARALLEL_LEVEL=8', '-Dbuild_dir=/home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/pull_request_test', '-Dconfigure_script=/home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/std/PullRequestLinuxCuda9.2TestingSettings.cmake', '-Dpackage_enables=../packageEnables.cmake', '-Dsubprojects_file=../package_subproject_list.cmake']' returned non-zero exit status 255

Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE

Console Output (last 100 lines) : Trilinos_pullrequest_clang_9.0.0 # 863 (click to expand)


git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Intrepid2,MueLu,TpetraCore'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_ST_LIST='Intrepid2,MueLu,TpetraCore'
E) Generate the packageEnables.cmake enables file
Wrote file 'packageEnables.cmake'
F) Generate the package_subproject_list.cmake file
Wrote file 'package_subproject_list.cmake'

Build name               = PR-7476-test-Trilinos_pullrequest_clang_9.0.0-863

Cur dir                  = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/pull_request_test

Parallel level           = 10

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 58

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.12.2/bin/cmake

-C "/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxClang9.0.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic141&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_clang_9.0.0-863&field3=buildstamp&compare3=61&value3=20200604-1836-Pull Request-Experimental

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_clang_9.0.0-863&field2=buildstamp&compare2=61&value2=20200604-1836-Pull Request-Experimental

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_clang_9.0.0-863&field2=buildstamp&compare2=61&value2=20200604-1836-Pull Request-Experimental

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 250K

..................................................  Size: 300K

.............................. Size of output: 329K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

........................... Size of output: 26K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.4.7

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.6.6

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/clang/9.0.0/openmpi/1.10.1/parallel/lib

GIT_URL = https://github.com/trilinos/Trilinos

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/boost/1.63.0/clang/9.0.0/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.4.7

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel6-x86_64/sems/tpl/hdf5/1.10.6/clang/9.0.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/clang/9.0.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/5.3.0:sems-clang/9.0.0:sems-openmpi/1.10.1:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.12.2:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@tmp

SEMS_CMAKE_VERSION = 3.12.2

HISTCONTROL = ignoredups

SERIAL_CXX = clang++

PWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #863

PULLREQUESTNUM = 7476

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/clang/9.0.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Intrepid2 = ON

-- Setting Trilinos_ENABLE_MueLu = ON

-- Setting Trilinos_ENABLE_TpetraCore = ON
Set CWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_python_2 # 2609 (click to expand)


HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = develop
https_proxy = http://wwwproxy.sandia.gov:80
F90 = gfortran
SERIAL_F90 = gfortran
SEMS_CMAKE_ROOT = /projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3
JOB_COOWNERS = prwolfe,trilinos
SERIAL_FC = gfortran
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = c829ad40-568d-4312-a168-b1ef5ec5b9a4
ftp_proxy = http://wwwproxy.sandia.gov:80/
QT_GRAPHICSSYSTEM_CHECKED = 1
SEMS_NINJA_FORTRAN_LOCAL_COMPILER_VERSION = 4.8.5
F77 = gfortran
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
NODE_NAME = tr-test-4-trilinos
GIT_CHECKOUT_DIR = Trilinos
SEMS_NINJA_FORTRAN_VERSION = 1.7.2
SEMS_COMPILER_VERSION = 7.2.0
SSH_CLIENT = 205.137.81.17 57002 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-4-trilinos trilinos-32 trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_4
PATH = /projects/sierra/linux_rh7/install/Python/2.7.15/bin:/projects/sierra/linux_rh7/install/Python/extrasbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/sbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/bin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin:/projects/sems/install/rhel7-x86_64/sems/compiler/gcc/7.2.0/base/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
SEMS_NINJA_FORTRAN_LOCAL_PYTHON_VERSION = 2.7.5
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 184c4901e4e6f47bb4c5495ccf2470fedfe48351
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
CC = gcc
SEMS_CMAKE_LOCAL_COMPILER_VERSION = 4.8.5
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 2609
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-gcc/7.2.0:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKCurrently Loaded Modulefiles:
  1) sems-env                   4) sems-cmake/3.10.3
  2) sems-git/2.10.1            5) atdm-env
  3) sems-gcc/7.2.0             6) atdm-ninja_fortran/1.7.2
Build name               = PR-7476-test-Trilinos_pullrequest_python_2-2609
Cur dir                  = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/TFW_testing_single_configure_prototype
Source dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos
Binary dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/pull_request_test
Parallel level           = 20
Testing Parallel level   = 20
skip_by_parts_submit     = OFF
skip_single_submit       = ON
skip_update_step         = ON
skip_upload_config_files = OFF
skip_clean_build_dir     = ON
Subproject count         = 1
Dashboard model          = Experimental
Dashboard track          = Pull Request
Running configuration:
/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake 
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos/cmake/std/PullRequestLinuxPython2.cmake"
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/packageEnables.cmake"
  -DTrilinos_ENABLE_TESTS:BOOL=ON
  -DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2
  -G "Ninja"
  /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos
CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos
CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-4.novalocal&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_python_2-2609&field3=buildstamp&compare3=61&value3=20200604-1836-Pull Request
CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_python_2-2609&field2=buildstamp&compare2=61&value2=20200604-1836-Pull Request
CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_python_2-2609&field2=buildstamp&compare2=61&value2=20200604-1836-Pull Request
Starting configure step.
   Each . represents 1024 bytes of output
    ...................... Size of output: 21K
configure submit error = 0
Configure suceeded.
Starting build step.
   Each symbol represents 1024 bytes of output.
    . Size of output: 0K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
SPACE_TMP = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = g++
PWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2609
PULLREQUESTNUM = 7476
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_TrilinosFrameworkTests = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_python_3 # 2620 (click to expand)


HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = develop
https_proxy = http://wwwproxy.sandia.gov:80
F90 = gfortran
SERIAL_F90 = gfortran
SEMS_CMAKE_ROOT = /projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3
JOB_COOWNERS = prwolfe,trilinos
SERIAL_FC = gfortran
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 4b79e218-d91c-47c4-9a89-10f6a3209a25
ftp_proxy = http://wwwproxy.sandia.gov:80/
QT_GRAPHICSSYSTEM_CHECKED = 1
SEMS_NINJA_FORTRAN_LOCAL_COMPILER_VERSION = 4.8.5
F77 = gfortran
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
NODE_NAME = tr-test-4-trilinos
GIT_CHECKOUT_DIR = Trilinos
SEMS_NINJA_FORTRAN_VERSION = 1.7.2
SEMS_COMPILER_VERSION = 7.2.0
SSH_CLIENT = 205.137.81.17 57002 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-4-trilinos trilinos-32 trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_4
PATH = /projects/sierra/linux_rh7/install/Python/3.6.3/bin:/projects/sierra/linux_rh7/install/Python/extrasbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/sbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/bin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin:/projects/sems/install/rhel7-x86_64/sems/compiler/gcc/7.2.0/base/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
SEMS_NINJA_FORTRAN_LOCAL_PYTHON_VERSION = 2.7.5
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 184c4901e4e6f47bb4c5495ccf2470fedfe48351
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
CC = gcc
SEMS_CMAKE_LOCAL_COMPILER_VERSION = 4.8.5
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 2620
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-gcc/7.2.0:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKSPACurrently Loaded Modulefiles:
  1) sems-env                   4) sems-cmake/3.10.3
  2) sems-git/2.10.1            5) atdm-env
  3) sems-gcc/7.2.0             6) atdm-ninja_fortran/1.7.2
Build name               = PR-7476-test-Trilinos_pullrequest_python_3-2620
Cur dir                  = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/TFW_testing_single_configure_prototype
Source dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos
Binary dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/pull_request_test
Parallel level           = 20
Testing Parallel level   = 20
skip_by_parts_submit     = OFF
skip_single_submit       = ON
skip_update_step         = ON
skip_upload_config_files = OFF
skip_clean_build_dir     = ON
Subproject count         = 1
Dashboard model          = Experimental
Dashboard track          = Pull Request
Running configuration:
/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake 
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos/cmake/std/PullRequestLinuxPython3.cmake"
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/packageEnables.cmake"
  -DTrilinos_ENABLE_TESTS:BOOL=ON
  -DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2
  -G "Ninja"
  /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos
CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos
CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-4.novalocal&field2=buildname&compare2=61&value2=PR-7476-test-Trilinos_pullrequest_python_3-2620&field3=buildstamp&compare3=61&value3=20200604-1836-Pull Request
CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_python_3-2620&field2=buildstamp&compare2=61&value2=20200604-1836-Pull Request
CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7476-test-Trilinos_pullrequest_python_3-2620&field2=buildstamp&compare2=61&value2=20200604-1836-Pull Request
Starting configure step.
   Each . represents 1024 bytes of output
    ...................... Size of output: 21K
configure submit error = 0
Configure suceeded.
Starting build step.
   Each symbol represents 1024 bytes of output.
    . Size of output: 0K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
CE_TMP = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = g++
PWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2620
PULLREQUESTNUM = 7476
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_TrilinosFrameworkTests = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

CDash Test Results for PR# 7476.

Wiki: How to Reproduce PR Testing Builds and Errors.

mperego · 2020-06-04T19:31:32Z

@mperego OK, I added those RUN_SERIALs.

@prwolfe has opened #7473 to move RIDE's PR testing to the Pascal nodes (rhel7F -> rhel7G), which have 2 GPUs each, and they are individually about twice as fast. Hopefully that will be a permanent fix for these timeouts, and if this gets merged first, we can just roll this back after #7473.

It seems you added RUN_SERIAL to
MueLu_UnitTestsIntrepid2Tpetra_MPI_4
but not
MueLu_UnitTestsIntrepid2Tpetra_MPI_1

brian-kelley · 2020-06-04T20:05:29Z

@mperego Oops, fixed. I left it on the 4-rank as well, just in case it's slow too.

@trilinos/muelu There's probably something that can be done to the Intrepid2+Tpetra+MueLu unit tests to speed them up, since 8m36s is spent in just 2 of the unit tests: GenerateRepresentativeBasisNodes_HEX_Equispaced and GenerateRepresentativeBasisNodes_QUAD_Spectral.

trilinos-autotester · 2020-06-04T20:48:13Z

Status Flag 'Pre-Test Inspection' - Auto Inspected - Inspection Is Not Necessary for this Pull Request.

trilinos-autotester · 2020-06-04T20:50:21Z

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6924
Status: STARTED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6735
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 5160
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 5007
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1196
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4492
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 867
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2613
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2624
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Using Repos:

Repo: TRILINOS (brian-kelley/Trilinos)

Pull Request Author: brian-kelley

mperego · 2020-06-04T20:56:59Z

Thanks @brian-kelley, fingers crossed.
I still don't understand why tests that take less than 30s when I run them on ride, they take 9m, even when run with RUN_SERIAL.

mperego · 2020-06-04T22:21:43Z

Good. Cuda build is clean. :-)
B.t.w. this time
Intrepid2_unit-test_Projection_Cuda_Test_InterpolationProjection_TET_MPI_1 took 2m30s.. this is 3 times faster than the worst timing (all with RUN_SERIAL). Ride really seems unreliable.

mperego

Looks good as a temporary fix. Thanks!

trilinos-autotester · 2020-06-04T22:27:23Z

Status Flag 'Pull Request AutoTester' - Jenkins Testing: all Jobs PASSED

Pull Request Auto Testing has PASSED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6924
Status: PASSED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6735
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 5160
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 5007
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1196
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4492
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 867
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2613
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2624
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7476
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	FixTestTimeout
TRILINOS_SOURCE_REPO	https://github.com/brian-kelley/Trilinos
TRILINOS_SOURCE_SHA	`3738034`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`184c490`

CDash Test Results for PR# 7476.

trilinos-autotester · 2020-06-04T22:27:41Z

Status Flag 'Pre-Merge Inspection' - SUCCESS: The last commit to this Pull Request has been INSPECTED AND APPROVED by [ mperego ]!

trilinos-autotester · 2020-06-04T22:27:49Z

Status Flag 'Pull Request AutoTester' - AutoMerge IS ENABLED, but the Label AT: AUTOMERGE is not set. Either set Label AT: AUTOMERGE or manually merge the PR...

mperego · 2020-06-05T07:27:33Z

@brian-kelley can we merge this?

brian-kelley · 2020-06-05T18:10:08Z

@mperego Sure, it should unblock the PRs like #7464

Tpetra,Intrepid2: Adding RUN_SERIAL to tests

81746c0

which were timing out on RIDE

brian-kelley added pkg: Tpetra pkg: Intrepid2 impacting: tests The defect (bug) is primarily a test failure (vs. a build failure) labels Jun 3, 2020

brian-kelley requested review from bartlettroscoe and kddevin June 3, 2020 22:22

brian-kelley self-assigned this Jun 3, 2020

brian-kelley mentioned this pull request Jun 3, 2020

Tpetra: remove fence in add() #7464

Merged

bartlettroscoe reviewed Jun 3, 2020

View reviewed changes

Intrepid2: RUN_SERIAL Cuda InterpolationProjection

9393e52

On RIDE PR testing, these are in danger of timing out (taking 8-9 minutes, where the limit is 10 minutes).

Intrepid2: only do HEX and TET in serial

a39daa0

mperego mentioned this pull request Jun 4, 2020

Sacado: Fix some Albany build issues with the new design #7449

Merged

MueLu, Intrepid2: more temporary RUN_SERIAL

98f468a

(for long-running tests)

brian-kelley requested a review from a team as a code owner June 4, 2020 18:16

MueLu: temporary RUN_SERIAL 1-rank intrepid2 test

3738034

mperego self-requested a review June 4, 2020 22:22

mperego approved these changes Jun 4, 2020

View reviewed changes

cgcgcg approved these changes Jun 4, 2020

View reviewed changes

brian-kelley merged commit e7756b9 into trilinos:develop Jun 5, 2020

mperego mentioned this pull request Jun 13, 2020

Trilinos auto PR tester stability issues #3276

Closed

trilinos-autotester mentioned this pull request Apr 27, 2022

MueLu: Adding filtering support for BrickAggregation #10440

Merged

Tpetra,Intrepid2: Adding RUN_SERIAL to tests #7476

Tpetra,Intrepid2: Adding RUN_SERIAL to tests #7476

Conversation

brian-kelley commented Jun 3, 2020 • edited Loading

Motivation

Stakeholder Feedback

Testing

bartlettroscoe left a comment

Choose a reason for hiding this comment

mperego commented Jun 3, 2020

brian-kelley commented Jun 3, 2020

mperego commented Jun 3, 2020

brian-kelley commented Jun 3, 2020

mperego commented Jun 3, 2020

brian-kelley commented Jun 3, 2020

mperego commented Jun 3, 2020

trilinos-autotester commented Jun 4, 2020

trilinos-autotester commented Jun 4, 2020

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_python_2

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_python_3

Jenkins Parameters

Using Repos:

trilinos-autotester commented Jun 4, 2020

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_python_2

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_python_3

Jenkins Parameters

brian-kelley commented Jun 4, 2020

trilinos-autotester commented Jun 4, 2020

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

brian-kelley commented Jun 3, 2020 •

edited

Loading

mperego commented Jun 4, 2020 •

edited

Loading