Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Zoltan2: Refactor directory to use Teuchos comm #8045

Merged
merged 1 commit into from
Sep 24, 2020
Merged

Zoltan2: Refactor directory to use Teuchos comm #8045

merged 1 commit into from
Sep 24, 2020

Conversation

MicheldeMessieres
Copy link
Contributor

@kddevin These are the conversions to Teuchos comm we discussed a while back. Most of this is just straight forward conversion from the MPI version to the Teuchos version.

Teuchos didn't have logical or (LOR) for reduce and I switched to bitwise (BOR). We're using int as 0 or 1 to represent bool logic in this case. I'm not sure it matters so much which we use but I could easily add LOR to Teuchos.

The only complication was Teuchos does not have waitAny. What I did as a short term fix was serialize that segment to just call wait on each request in order (would be some loss of performance) and left a note describing how we can convert this back to waitAny when available. I started looking at what Teuchos needs and it should be pretty easy to set up since we can just copy the waitAll method as a pattern for the setup. But there is a complication since the Teuchos request holds the MPI_Request internally. For waitAll, Teuchos releases all of them. For waitAny we want to release just the one that responds (but don't know this until after waitAny). Maybe we release all and restore all except the one we get. I tried a bit and had some bug with it so decided to leave it for a separate PR.

What I'm proposing is we accept the loss of performance for now so this PR doesn't spread too much. Then I or someone could work on adding the Teuchos::waitAny and restore that as a separate PR.

Other minor fixes: I switched to Tpetra::ScopeGuard and also cleaned up a hack I had in place so it runs on serial. I've preserved the serial tests, which we don't really need, just because it really helps with debugging. But it's in a much cleaner setup now.

There are some untested code blocks remaining and I cleaned up the throw comments I had left for that.

@trilinos/zoltan2

Motivation

Clean up comm commands to use Teuchos instead of raw MPI calls.

Testing

Mac parallel and serial builds - Cuda on white - zoltan2 tests

@MicheldeMessieres
Zoltan2: Refactor directory to use Teuchos comm
82f8b7b 
Most of this PR is just straight forward conversion of
raw MPI calls to Teuchos forms.

Teuchos does not have waitAny yet so I serialized that
segment anticipating we would upgrade Teuchos and then
switch this back. I expect this has introduced a small
performance loss.

Also switches to Tpetra::ScopeGuard and cleans up some
prior hacks which allow these tests to run serial for
debugging.
@trilinos-autotester
Copy link
Contributor

Status Flag 'Pre-Test Inspection' - - This Pull Request Requires Inspection... The code must be inspected by a member of the Team before Testing/Merging
NO REVIEWS HAVE BEEN PERFORMED ON THIS PULL REQUEST!

kddevin
kddevin previously approved these changes Sep 22, 2020
View reviewed changes
Copy link
Contributor

@kddevin kddevin left a comment •
edited
Loading

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

LGTM Thanks, @MicheldeMessieres

@trilinos-autotester
Copy link
Contributor

Status Flag 'Pre-Test Inspection' - SUCCESS: The last commit to this Pull Request has been INSPECTED AND APPROVED by [ kddevin ]!

@trilinos-autotester
Copy link
Contributor

Status Flag 'Master Merge AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

  • Build Num: 7984
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
COMPILER_MODULE sems-gcc/4.8.4
FORCE_CLEAN true
JENKINS_BUILD_TYPE Release
JENKINS_COMM_TYPE MPI
JENKINS_DO_COMPLEX OFF
JENKINS_JOB_TYPE Experimental
MPI_MODULE sems-openmpi/1.8.7
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

  • Build Num: 7800
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

  • Build Num: 6216
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

  • Build Num: 5697
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

  • Build Num: 2257
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_7.0.1

  • Build Num: 368
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

  • Build Num: 1325
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_10.0.0

  • Build Num: 702
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

  • Build Num: 5552
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0_debug

  • Build Num: 436
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Using Repos:

Repo: TRILINOS (Tech-XCorp/Trilinos)
  • Branch: fixDirectoryComm
  • SHA: 82f8b7b
  • Mode: TEST_REPO

Pull Request Author: MicheldeMessieres

@trilinos-autotester
Copy link
Contributor

Status Flag 'Master Merge AutoTester' - Jenkins Testing: 1 or more Jobs FAILED

Note: Testing will normally be attempted again in approx. 15 Mins. If a change to the PR source branch occurs, the testing will be attempted again on next available autotester run.

Pull Request Auto Testing has FAILED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

  • Build Num: 7984
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
COMPILER_MODULE sems-gcc/4.8.4
FORCE_CLEAN true
JENKINS_BUILD_TYPE Release
JENKINS_COMM_TYPE MPI
JENKINS_DO_COMPLEX OFF
JENKINS_JOB_TYPE Experimental
MPI_MODULE sems-openmpi/1.8.7
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

  • Build Num: 7800
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

  • Build Num: 6216
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

  • Build Num: 5697
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

  • Build Num: 2257
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_7.0.1

  • Build Num: 368
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

  • Build Num: 1325
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_10.0.0

  • Build Num: 702
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

  • Build Num: 5552
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0_debug

  • Build Num: 436
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.8.4 # 7984 (click to expand) 

Switched to a new branch 'master'
Branch master set up to track remote branch master from origin.
Merge made by the 'recursive' strategy.
 .../core/src/directory/Zoltan2_Directory.hpp       |  12 +-
 .../core/src/directory/Zoltan2_Directory_Comm.cpp  | 160 +++++++++------------
 .../core/src/directory/Zoltan2_Directory_Comm.hpp  |  16 +--
 .../test/core/directory/directoryTest_Impl.hpp     |  12 +-
 .../core/directory/directoryTest_KokkosSimple.cpp  |  13 +-
 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
jects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
WORKSPACE = /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = jmwille,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = b62b1279-622b-4b3e-bdee-3de3fda4c5ff
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
GIT_CHECKOUT_DIR = Trilinos
JENKINS_BUILD_TYPE = Release
SSH_CLIENT = 205.137.81.17 36660 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-5-trilinos trilinos-CAPACITY trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_5
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = jmwille@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 7984
JOB_COOWNERS_EMAILS = jmwille@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #7984
PULLREQUESTNUM = 8045

================================================================================

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_4.8.4 8045 7984 /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_4.8.4
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_intel_17.0.1 # 7800 (click to expand) 

 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
MODULEPATH = /projects/sems/modulefiles/rhel7-x86_64/sems/devpack:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler:/projects/sems/modulefiles/rhel7-x86_64/sems/tpl:/projects/sems/modulefiles/rhel7-x86_64/sems/utility:/projects/sems/modulefiles/projects:/usr/local/modules/3.2.10/Modules/versions:/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
JOB_COOWNERS = prwolfe,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = bcf6f857-8990-4720-b3a5-dd44e636cf15
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 49012 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = ascic143-trilinos trilinos-37 trilinos-any trilinos-haswell
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 7800
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #7800
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_intel_17.0.1 8045 7800 /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_intel_17.0.1
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.9.3_SERIAL # 6216 (click to expand) 

rojects/sems/modulefiles/projects:/usr/local/modules/3.2.10/Modules/versions:/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = wcmclen,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = f5a86975-7fb5-4f58-808f-f456a4787b09
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 38252 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic113-trilinos trilinos-32 trilinos-any trilinos-sandybridge
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = wcmclen@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 6216
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = wcmclen@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #6216
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_4.9.3_SERIAL 8045 6216 /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_4.9.3_SERIAL
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic113/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0 # 5697 (click to expand) 

 6 files changed, 76 insertions(+), 149 deletions(-)
al/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 2b905202-928c-403a-a6b0-b6c2af1e6db2
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 42870 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic114-trilinos trilinos-32 trilinos-any trilinos-sandybridge
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 5697
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #5697
PULLREQUESTNUM = 8045

================================================================================

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_7.2.0 8045 5697 /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_7.2.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_8.3.0 # 2257 (click to expand) 

l/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,Trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = e3d690f2-0b1a-4de7-ae82-69152f053bae
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 52948 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic144-trilinos trilinos-37 trilinos-any trilinos-haswell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 2257
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2257
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_8.3.0 8045 2257 /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_8.3.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_clang_7.0.1 # 368 (click to expand) 

ules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = f1f09205-f9ba-4dc5-bb51-f08c3924ca81
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 49012 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic143-trilinos trilinos-37 trilinos-any trilinos-haswell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 368
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #368
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_clang_7.0.1 8045 368 /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_clang_7.0.1
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_clang_9.0.0 # 1325 (click to expand) 

l/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = e9d74785-cf3a-4fb1-8b85-9589bf1ad592
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 52948 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic144-trilinos trilinos-37 trilinos-any trilinos-haswell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 1325
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #1325
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_clang_9.0.0 8045 1325 /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_clang_9.0.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic144/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_clang_10.0.0 # 702 (click to expand) 

Branch master set up to track remote branch master from origin.
Your branch is up-to-date with 'origin/master'.
Merge made by the 'recursive' strategy.
 .../core/src/directory/Zoltan2_Directory.hpp       |  12 +-
 .../core/src/directory/Zoltan2_Directory_Comm.cpp  | 160 +++++++++------------
 .../core/src/directory/Zoltan2_Directory_Comm.hpp  |  16 +--
 .../test/core/directory/directoryTest_Impl.hpp     |  12 +-
 .../core/directory/directoryTest_KokkosSimple.cpp  |  13 +-
 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
WORKSPACE = /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 67ebb350-b60b-4f59-83bd-f30d03a61048
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
NODE_NAME = tr-test-5-trilinos
GIT_CHECKOUT_DIR = Trilinos
SSH_CLIENT = 205.137.81.17 36660 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-5-trilinos trilinos-CAPACITY trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_5
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 702
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #702
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_clang_10.0.0 8045 702 /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_clang_10.0.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/tr-test-5/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_cuda_9.2 # 5552 (click to expand) 

SSH_CLIENT = 205.137.81.17 40654 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
LSF_LIM_API_NTRIES = 1
PATH = /home/projects/ppc64le/python/2.7.12/bin:/home/projects/ppc64le/git/2.10.1/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/etc:/usr/local/bin:/usr/bin:/opt/ibutils/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
LSB_QUEUE = rhel7F
LSF_JOB_TIMESTAMP_VALUE = 1600817383
LSB_EXEC_HOSTTYPE = LINUXPPC64LE
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
LSB_DJOB_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1600817383.7371.hostfile
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
LSF_LIBDIR = /opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/lib
LSB_SUB_USER = trilinos
NODE_LABELS = ride-trilinos trilinos-ride
GIT_BRANCH_2 = origin/pull_request_changes
GIT_CHECKOUT_DIR_1 = TFW_single_configure_support_scripts
GIT_CHECKOUT_DIR_2 = TFW_testing_single_configure_prototype
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 5552
SBD_KRB5CCNAME_VAL = 
LSB_RES_GET_FANOUT_INFO = Y
RUN_DISPLAY_URL = https://ascic-jenkins.sandia.gov/job/trilinos-folder/job/Trilinos_pullrequest_cuda_9.2/5552/display/redirect
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
LSB_BATCH_JID = 7371
KRB5CCNAME = FILE:/tmp/krb5From https://github.com/Tech-XCorp/Trilinos
 * branch            fixDirectoryComm -> FETCH_HEAD
 * [new branch]      fixDirectoryComm -> source_remote/fixDirectoryComm
From https://github.com/trilinos/Trilinos
 * branch            master     -> FETCH_HEAD
HEAD is now at f668b57 Merge Pull Request #8070 from trilinos/Trilinos/master_merge_20200922_000611
Switched to and reset branch 'master'
Branch master set up to track remote branch master from origin.
Your branch is up-to-date with 'origin/master'.
Merge made by the 'recursive' strategy.
 .../core/src/directory/Zoltan2_Directory.hpp       |  12 +-
 .../core/src/directory/Zoltan2_Directory_Comm.cpp  | 160 +++++++++------------
 .../core/src/directory/Zoltan2_Directory_Comm.hpp  |  16 +--
 .../test/core/directory/directoryTest_Impl.hpp     |  12 +-
 .../core/directory/directoryTest_KokkosSimple.cpp  |  13 +-
 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
cc_91724_wQFUVKfdGI
GIT_BRANCH = origin/master
LSB_JOBNAME = trilinos-folder/Trilinos_pullrequest_cuda_9.2
LOADEDMODULES = git/2.10.1:python/2.7.12
WORKSPACE_TMP = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3@tmp
GIT_BRANCH_1 = origin/master
HISTCONTROL = ignoredups
PWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3
LS_EXECCWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #5552
PYTHON_ROOT = /home/projects/ppc64le/python/2.7.12
PULLREQUESTNUM = 8045
BINARY_TYPE_HPC = 

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_cuda_9.2 8045 5552 /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_cuda_9.2
    • 

  • WORKSPACE    : /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@3
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0_debug # 436 (click to expand) 

ulefiles/projects:/usr/local/modules/3.2.10/Modules/versions:/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = prwolfe,Trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = fcef5ab8-cb4f-4f5f-a5a9-987a1460e5e9
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 42870 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic114-trilinos trilinos-32 trilinos-any trilinos-sandybridge
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 436
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #436
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_7.2.0_debug 8045 436 /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_7.2.0_debug
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic114/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE


CDash Test Results for PR# 8045.


Wiki: How to Reproduce PR Testing Builds and Errors.

@trilinos-autotester
Copy link
Contributor

Status Flag 'Master Merge AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

  • Build Num: 7990
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
COMPILER_MODULE sems-gcc/4.8.4
FORCE_CLEAN true
JENKINS_BUILD_TYPE Release
JENKINS_COMM_TYPE MPI
JENKINS_DO_COMPLEX OFF
JENKINS_JOB_TYPE Experimental
MPI_MODULE sems-openmpi/1.8.7
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

  • Build Num: 7806
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

  • Build Num: 6222
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

  • Build Num: 5698
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

  • Build Num: 2263
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_7.0.1

  • Build Num: 369
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

  • Build Num: 1326
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_10.0.0

  • Build Num: 708
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

  • Build Num: 5558
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0_debug

  • Build Num: 442
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Using Repos:

Repo: TRILINOS (Tech-XCorp/Trilinos)
  • Branch: fixDirectoryComm
  • SHA: 82f8b7b
  • Mode: TEST_REPO

Pull Request Author: MicheldeMessieres

@trilinos-autotester
Copy link
Contributor

Status Flag 'Master Merge AutoTester' - Jenkins Testing: 1 or more Jobs FAILED

Note: Testing will normally be attempted again in approx. 15 Mins. If a change to the PR source branch occurs, the testing will be attempted again on next available autotester run.

Pull Request Auto Testing has FAILED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

  • Build Num: 7990
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
COMPILER_MODULE sems-gcc/4.8.4
FORCE_CLEAN true
JENKINS_BUILD_TYPE Release
JENKINS_COMM_TYPE MPI
JENKINS_DO_COMPLEX OFF
JENKINS_JOB_TYPE Experimental
MPI_MODULE sems-openmpi/1.8.7
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

  • Build Num: 7806
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

  • Build Num: 6222
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

  • Build Num: 5698
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

  • Build Num: 2263
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_7.0.1

  • Build Num: 369
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

  • Build Num: 1326
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_10.0.0

  • Build Num: 708
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

  • Build Num: 5558
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0_debug

  • Build Num: 442
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
JENKINS_JOB_TYPE Experimental
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.8.4 # 7990 (click to expand) 

Your branch is up-to-date with 'origin/master'.
Merge made by the 'recursive' strategy.
 .../core/src/directory/Zoltan2_Directory.hpp       |  12 +-
 .../core/src/directory/Zoltan2_Directory_Comm.cpp  | 160 +++++++++------------
 .../core/src/directory/Zoltan2_Directory_Comm.hpp  |  16 +--
 .../test/core/directory/directoryTest_Impl.hpp     |  12 +-
 .../core/directory/directoryTest_KokkosSimple.cpp  |  13 +-
 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
ojects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
WORKSPACE = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = jmwille,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 9b5988f1-26b0-4e8b-b5c2-460e2aeddffc
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
GIT_CHECKOUT_DIR = Trilinos
JENKINS_BUILD_TYPE = Release
SSH_CLIENT = 205.137.81.17 57488 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-7-trilinos trilinos-CAPACITY trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_7
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = jmwille@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 7990
JOB_COOWNERS_EMAILS = jmwille@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #7990
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_4.8.4 8045 7990 /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_4.8.4
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_intel_17.0.1 # 7806 (click to expand) 

 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
MODULEPATH = /projects/sems/modulefiles/rhel7-x86_64/sems/devpack:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler:/projects/sems/modulefiles/rhel7-x86_64/sems/tpl:/projects/sems/modulefiles/rhel7-x86_64/sems/utility:/projects/sems/modulefiles/projects:/usr/local/modules/3.2.10/Modules/versions:/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
JOB_COOWNERS = prwolfe,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 04653bb5-ae98-48bb-af3c-5495e8270289
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 57960 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = ascic158-trilinos trilinos-32 trilinos-37 trilinos-any trilinos-broadwell
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 7806
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #7806
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_intel_17.0.1 8045 7806 /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_intel_17.0.1
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.9.3_SERIAL # 6222 (click to expand) 

projects/sems/modulefiles/projects:/usr/local/modules/3.2.10/Modules/versions:/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = wcmclen,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 870b1c48-f6d8-46c0-9292-adeceb4e4f61
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 51612 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic166-trilinos trilinos-32 trilinos-any trilinos-skylake
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = wcmclen@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 6222
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = wcmclen@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #6222
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_4.9.3_SERIAL 8045 6222 /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_4.9.3_SERIAL
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0 # 5698 (click to expand) 

al/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 555d95b8-ceaa-4efa-9734-e6c2f260506d
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 57960 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic158-trilinos trilinos-32 trilinos-37 trilinos-any trilinos-broadwell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 5698
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #5698
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_7.2.0 8045 5698 /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_7.2.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_8.3.0 # 2263 (click to expand) 

ocal/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,Trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 303f5130-18a5-45fd-9cea-625bf19d1453
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 51612 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic166-trilinos trilinos-32 trilinos-any trilinos-skylake
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 2263
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2263
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_8.3.0 8045 2263 /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_8.3.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_clang_7.0.1 # 369 (click to expand) 

ules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 4a1273bc-7dd0-4bc0-b883-c7da3c3bb496
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 49012 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic143-trilinos trilinos-37 trilinos-any trilinos-haswell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 369
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #369
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_clang_7.0.1 8045 369 /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_clang_7.0.1
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_clang_9.0.0 # 1326 (click to expand) 

/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 646ca30a-8d1a-44c4-b706-fed93b002861
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 56594 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic141-trilinos trilinos-37 trilinos-any trilinos-haswell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 20b9b9988a4eab3854f7a941e3c003c0aa9f71be
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 1326
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #1326
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_clang_9.0.0 8045 1326 /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_clang_9.0.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_clang_10.0.0 # 708 (click to expand) 

/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 588f5198-a229-416e-bb77-b85514d45659
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 51612 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic166-trilinos trilinos-32 trilinos-any trilinos-skylake
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 708
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #708
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_clang_10.0.0 8045 708 /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_clang_10.0.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_cuda_9.2 # 5558 (click to expand) 

SSH_CLIENT = 205.137.81.17 40654 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
LSF_LIM_API_NTRIES = 1
PATH = /home/projects/ppc64le/python/2.7.12/bin:/home/projects/ppc64le/git/2.10.1/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/etc:/usr/local/bin:/usr/bin:/opt/ibutils/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
LSB_QUEUE = rhel7F
LSF_JOB_TIMESTAMP_VALUE = 1600841457
LSB_EXEC_HOSTTYPE = LINUXPPC64LE
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
LSB_DJOB_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1600841457.7378.hostfile
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
LSF_LIBDIR = /opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/lib
LSB_SUB_USER = trilinos
NODE_LABELS = ride-trilinos trilinos-ride
GIT_BRANCH_2 = origin/pull_request_changes
GIT_CHECKOUT_DIR_1 = TFW_single_configure_support_scripts
GIT_CHECKOUT_DIR_2 = TFW_testing_single_configure_prototype
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 5558
SBD_KRB5CCNAME_VAL = 
LSB_RES_GET_FANOUT_INFO = Y
RUN_DISPLAY_URL = https://ascic-jenkins.sandia.gov/job/trilinos-folder/job/Trilinos_pullrequest_cuda_9.2/5558/display/redirect
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
LSB_BATCH_JID = 7378
KRB5CCNAME = FILE:/tmp/krb5cc_91724_wQFUVKfFrom https://github.com/Tech-XCorp/Trilinos
 * branch            fixDirectoryComm -> FETCH_HEAD
 * [new branch]      fixDirectoryComm -> source_remote/fixDirectoryComm
From https://github.com/trilinos/Trilinos
 * branch            master     -> FETCH_HEAD
HEAD is now at f668b57 Merge Pull Request #8070 from trilinos/Trilinos/master_merge_20200922_000611
Switched to and reset branch 'master'
Branch master set up to track remote branch master from origin.
Your branch is up-to-date with 'origin/master'.
Merge made by the 'recursive' strategy.
 .../core/src/directory/Zoltan2_Directory.hpp       |  12 +-
 .../core/src/directory/Zoltan2_Directory_Comm.cpp  | 160 +++++++++------------
 .../core/src/directory/Zoltan2_Directory_Comm.hpp  |  16 +--
 .../test/core/directory/directoryTest_Impl.hpp     |  12 +-
 .../core/directory/directoryTest_KokkosSimple.cpp  |  13 +-
 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
dGI
GIT_BRANCH = origin/master
LSB_JOBNAME = trilinos-folder/Trilinos_pullrequest_cuda_9.2
LOADEDMODULES = git/2.10.1:python/2.7.12
WORKSPACE_TMP = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@tmp
GIT_BRANCH_1 = origin/master
HISTCONTROL = ignoredups
PWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
LS_EXECCWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #5558
PYTHON_ROOT = /home/projects/ppc64le/python/2.7.12
PULLREQUESTNUM = 8045
BINARY_TYPE_HPC = 

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_cuda_9.2 8045 5558 /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_cuda_9.2
    • 

  • WORKSPACE    : /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0_debug # 442 (click to expand) 

lefiles/projects:/usr/local/modules/3.2.10/Modules/versions:/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = prwolfe,Trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 695b32db-13d5-4ff2-8bf1-e916111e4b79
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 57960 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic158-trilinos trilinos-32 trilinos-37 trilinos-any trilinos-broadwell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 442
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #442
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_7.2.0_debug 8045 442 /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_7.2.0_debug
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE


CDash Test Results for PR# 8045.


Wiki: How to Reproduce PR Testing Builds and Errors.

@MicheldeMessieres MicheldeMessieres added the AT: RETEST Causes the PR autotester to run a new round of PR tests on the next iteration label Sep 23, 2020
@trilinos-autotester
Copy link
Contributor

Status Flag 'Master Merge AutoTester' - User Requested Retest - Label AT: RETEST will be reset after testing.

@trilinos-autotester
Copy link
Contributor

Status Flag 'Master Merge AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

  • Build Num: 7997
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
COMPILER_MODULE sems-gcc/4.8.4
FORCE_CLEAN true
JENKINS_BUILD_TYPE Release
JENKINS_COMM_TYPE MPI
JENKINS_DO_COMPLEX OFF
JENKINS_JOB_TYPE Experimental
MPI_MODULE sems-openmpi/1.8.7
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

  • Build Num: 7813
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

  • Build Num: 6229
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

  • Build Num: 5700
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

  • Build Num: 2270
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_7.0.1

  • Build Num: 371
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

  • Build Num: 1328
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_10.0.0

  • Build Num: 715
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

  • Build Num: 5565
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0_debug

  • Build Num: 449
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
JENKINS_JOB_TYPE Experimental
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Using Repos:

Repo: TRILINOS (Tech-XCorp/Trilinos)
  • Branch: fixDirectoryComm
  • SHA: 82f8b7b
  • Mode: TEST_REPO

Pull Request Author: MicheldeMessieres

@trilinos-autotester
Copy link
Contributor

Status Flag 'Master Merge AutoTester' - Jenkins Testing: 1 or more Jobs FAILED

Note: Testing will normally be attempted again in approx. 15 Mins. If a change to the PR source branch occurs, the testing will be attempted again on next available autotester run.

Pull Request Auto Testing has FAILED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

  • Build Num: 7997
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
COMPILER_MODULE sems-gcc/4.8.4
FORCE_CLEAN true
JENKINS_BUILD_TYPE Release
JENKINS_COMM_TYPE MPI
JENKINS_DO_COMPLEX OFF
JENKINS_JOB_TYPE Experimental
MPI_MODULE sems-openmpi/1.8.7
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

  • Build Num: 7813
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

  • Build Num: 6229
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

  • Build Num: 5700
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

  • Build Num: 2270
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_7.0.1

  • Build Num: 371
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

  • Build Num: 1328
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_clang_10.0.0

  • Build Num: 715
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

  • Build Num: 5565
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
FORCE_CLEAN true
JENKINS_JOB_TYPE Experimental
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0_debug

  • Build Num: 449
  • Status: FAILED

Jenkins Parameters

Parameter Name Value
JENKINS_JOB_TYPE Experimental
PR_LABELS AT: RETEST;pkg: Zoltan2
PULLREQUESTNUM 8045
PULLREQUEST_CDASH_TRACK Clean
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH master
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA f969561
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.8.4 # 7997 (click to expand) 

Your branch is up-to-date with 'origin/master'.
Merge made by the 'recursive' strategy.
 .../core/src/directory/Zoltan2_Directory.hpp       |  12 +-
 .../core/src/directory/Zoltan2_Directory_Comm.cpp  | 160 +++++++++------------
 .../core/src/directory/Zoltan2_Directory_Comm.hpp  |  16 +--
 .../test/core/directory/directoryTest_Impl.hpp     |  12 +-
 .../core/directory/directoryTest_KokkosSimple.cpp  |  13 +-
 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
jects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
WORKSPACE = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = jmwille,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 7261382f-7de6-4575-a62c-0b8ec0b7cc44
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
GIT_CHECKOUT_DIR = Trilinos
JENKINS_BUILD_TYPE = Release
SSH_CLIENT = 205.137.81.17 57488 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-7-trilinos trilinos-CAPACITY trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_7
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = jmwille@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 7997
JOB_COOWNERS_EMAILS = jmwille@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #7997
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_4.8.4 8045 7997 /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_4.8.4
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_intel_17.0.1 # 7813 (click to expand) 

 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
s-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
MODULEPATH = /projects/sems/modulefiles/rhel7-x86_64/sems/devpack:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler:/projects/sems/modulefiles/rhel7-x86_64/sems/tpl:/projects/sems/modulefiles/rhel7-x86_64/sems/utility:/projects/sems/modulefiles/projects:/usr/local/modules/3.2.10/Modules/versions:/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
JOB_COOWNERS = prwolfe,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 79aec280-1f9f-402b-b401-b14c2a064946
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 57960 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = ascic158-trilinos trilinos-32 trilinos-37 trilinos-any trilinos-broadwell
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 7813
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #7813
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_intel_17.0.1 8045 7813 /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_intel_17.0.1
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@2
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.9.3_SERIAL # 6229 (click to expand) 

projects/sems/modulefiles/projects:/usr/local/modules/3.2.10/Modules/versions:/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = wcmclen,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 5b47be33-9c3d-424c-b048-f90131032f1c
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 51612 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic166-trilinos trilinos-32 trilinos-any trilinos-skylake
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = wcmclen@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 6229
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = wcmclen@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #6229
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_4.9.3_SERIAL 8045 6229 /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_4.9.3_SERIAL
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0 # 5700 (click to expand) 

al/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = a96231a0-2ca8-45fa-9b5b-fde7ffad9162
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 57960 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic158-trilinos trilinos-32 trilinos-37 trilinos-any trilinos-broadwell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 5700
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #5700
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_7.2.0 8045 5700 /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_7.2.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_8.3.0 # 2270 (click to expand) 

ocal/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,Trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 77d33372-da2c-422d-be17-945bb52b41b5
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 51612 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic166-trilinos trilinos-32 trilinos-any trilinos-skylake
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 2270
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2270
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_8.3.0 8045 2270 /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_8.3.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_clang_7.0.1 # 371 (click to expand) 

ules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 7c448dd1-c5b4-4e64-89b6-af71e3f98af9
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 49012 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic143-trilinos trilinos-37 trilinos-any trilinos-haswell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 371
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #371
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_clang_7.0.1 8045 371 /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_clang_7.0.1
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic143/workspace/trilinos-folder/Trilinos_pullrequest_clang_7.0.1
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_clang_9.0.0 # 1328 (click to expand) 

/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = f11ceb93-4fa2-4e60-9ce3-f28b5a345eab
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 56594 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic141-trilinos trilinos-37 trilinos-any trilinos-haswell
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 1328
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #1328
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_clang_9.0.0 8045 1328 /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_clang_9.0.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_clang_10.0.0 # 715 (click to expand) 

/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_BRANCH = origin/master
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = hrswant,trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = c3fd610b-2f27-4a15-9888-8fc1859569f6
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 51612 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic166-trilinos trilinos-32 trilinos-any trilinos-skylake
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 715
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
GIT_URL = https://github.com/trilinos/Trilinos
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #715
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_clang_10.0.0 8045 715 /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_clang_10.0.0
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_clang_10.0.0
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_cuda_9.2 # 5565 (click to expand) 

SSH_CLIENT = 205.137.81.17 40654 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
LSF_LIM_API_NTRIES = 1
PATH = /home/projects/ppc64le/python/2.7.12/bin:/home/projects/ppc64le/git/2.10.1/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/etc:/usr/local/bin:/usr/bin:/opt/ibutils/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
LSB_QUEUE = rhel7F
LSF_JOB_TIMESTAMP_VALUE = 1600881930
LSB_EXEC_HOSTTYPE = LINUXPPC64LE
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
LSB_DJOB_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1600881929.7394.hostfile
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
LSF_LIBDIR = /opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/lib
LSB_SUB_USER = trilinos
NODE_LABELS = ride-trilinos trilinos-ride
GIT_BRANCH_2 = origin/pull_request_changes
GIT_CHECKOUT_DIR_1 = TFW_single_configure_support_scripts
GIT_CHECKOUT_DIR_2 = TFW_testing_single_configure_prototype
JOB_OWNER_EMAIL = HRSwant@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 5565
SBD_KRB5CCNAME_VAL = 
LSB_RES_GET_FANOUT_INFO = Y
RUN_DISPLAY_URL = https://ascic-jenkins.sandia.gov/job/trilinos-folder/job/Trilinos_pullrequest_cuda_9.2/5565/display/redirect
JOB_COOWNERS_EMAILS = HRSwant@sandia.gov,trilinos@sandia.gov
LSB_BATCH_JID = 7394
KRB5CCNAME = FILE:/tmp/krb5cc_91724_wQFUVKfdFrom https://github.com/Tech-XCorp/Trilinos
 * branch            fixDirectoryComm -> FETCH_HEAD
 * [new branch]      fixDirectoryComm -> source_remote/fixDirectoryComm
From https://github.com/trilinos/Trilinos
 * branch            master     -> FETCH_HEAD
HEAD is now at bc19383 Merge Pull Request #8084 from trilinos/Trilinos/master_merge_20200923_000617
Switched to and reset branch 'master'
Branch master set up to track remote branch master from origin.
Your branch is up-to-date with 'origin/master'.
Merge made by the 'recursive' strategy.
 .../core/src/directory/Zoltan2_Directory.hpp       |  12 +-
 .../core/src/directory/Zoltan2_Directory_Comm.cpp  | 160 +++++++++------------
 .../core/src/directory/Zoltan2_Directory_Comm.hpp  |  16 +--
 .../test/core/directory/directoryTest_Impl.hpp     |  12 +-
 .../core/directory/directoryTest_KokkosSimple.cpp  |  13 +-
 .../directory/directoryTest_findUniqueGids.cpp     |  12 +-
 6 files changed, 76 insertions(+), 149 deletions(-)
GI
GIT_BRANCH = origin/master
LSB_JOBNAME = trilinos-folder/Trilinos_pullrequest_cuda_9.2
LOADEDMODULES = git/2.10.1:python/2.7.12
WORKSPACE_TMP = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@tmp
GIT_BRANCH_1 = origin/master
HISTCONTROL = ignoredups
PWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
LS_EXECCWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #5565
PYTHON_ROOT = /home/projects/ppc64le/python/2.7.12
PULLREQUESTNUM = 8045
BINARY_TYPE_HPC = 

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_cuda_9.2 8045 5565 /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_cuda_9.2
    • 

  • WORKSPACE    : /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE
Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0_debug # 449 (click to expand) 

dulefiles/projects:/usr/local/modules/3.2.10/Modules/versions:/usr/local/modules/3.2.10/Modules/3.2.10/modulefiles:/usr/local/modules/3.2.10/Modules/modulefiles:/usr/share/Modules/modulefiles:/etc/modulefiles:/usr/local/modules/default/modulefiles:/projects/gs/modules:/projects/sierra/linux_rh7/modules:/projects/aleph/modules/engsci-linux:/projects/dakota/modules/rhel7:/projects/viz/modules:/projects/pointwise/modules:/projects/aerosciences/modules/cee-rhel7:/projects/cth/modules:/repository/usr/local/modules:/projects/percept/modules/linux:/projects/xyce/modules/rhel7:/projects/alegranevada/modules:/projects/sparc/modules/cee-rhel7:/projects/slycat/modules:/projects/network_flow_modeling/modules:/projects/radeff/sceptre/modules:/projects/cde/v1/modules:/projects/spitfire_dev/modules:/projects/matcal/modules
PERL5LIB = /ascldap/users/trilinos/perl5/lib/perl5:
PYTHONHOME = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
_LMFILES_ = /projects/sems/modulefiles/projects/sems-env:/projects/sems/modulefiles/rhel7-x86_64/sems/utility/sems-git/2.10.1:/projects/sems/modulefiles/rhel7-x86_64/sems/compiler/sems-python/2.7.9
GIT_URL = https://github.com/trilinos/Trilinos
MODULE_VERSION = 3.2.10
NODE_COOWNERS = ceeadmin,ceejenkins
HUDSON_URL = https://ascic-jenkins.sandia.gov/
GIT_PREVIOUS_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
PERL_LOCAL_LIB_ROOT = :/ascldap/users/trilinos/perl5
WORKSPACE = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug
QTDIR = /usr/lib64/qt-3.3
LD_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/lib
LANG = en_US.UTF-8
QTLIB = /usr/lib64/qt-3.3/lib
QTINC = /usr/lib64/qt-3.3/include
HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = master
https_proxy = http://wwwproxy.sandia.gov:80
JOB_COOWNERS = prwolfe,Trilinos
SEMS_PYTHON_ROOT = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = d573d6ea-3243-4fc0-b0eb-293499446ae3
SEMS_PYTHON_LOCAL_COMPILER_VERSION = 4.8.5
ftp_proxy = http://wwwproxy.sandia.gov:80/
SEMS_PYTHON_LOCAL_PYTHON_VERSION = 2.7.5
QT_GRAPHICSSYSTEM_CHECKED = 1
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
KDEDIRS = /usr
NODE_OWNER_EMAIL = ceeadmin@sandia.gov
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
ROOT_BUILD_CAUSE = MANUALTRIGGER
PERL_MB_OPT = --install_base /ascldap/users/trilinos/perl5
GIT_CHECKOUT_DIR = Trilinos
PERL_MM_OPT = INSTALL_BASE=/ascldap/users/trilinos/perl5
SSH_CLIENT = 205.137.81.17 51612 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
PATH = /projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/lib64/qt-3.3/bin:/ascldap/users/trilinos/perl5/bin:/usr/local/bin:/usr/bin:/opt/puppetlabs/bin:/usr/local/sbin
NODE_LABELS = ascic166-trilinos trilinos-32 trilinos-any trilinos-skylake
GIT_PREVIOUS_SUCCESSFUL_COMMIT = f668b5700f572d55e54a5e75ab504af8d135f905
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
JOB_OWNER_EMAIL = prwolfe@sandia.gov
PULLREQUEST_CDASH_TRACK = Clean
BUILD_ID = 449
MODULE_VERSION_STACK = 3.2.10
JOB_COOWNERS_EMAILS = prwolfe@sandia.gov,trilinos@sandia.gov
GIT_BRANCH = origin/master
SNLSYSTEM = cee
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug@tmp
HISTCONTROL = ignoredups
PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #449
PULLREQUESTNUM = 8045

================================================================================

git remote exists, removing it

PRDriver> Merge completed successfully.

PRDriver>

PRDriver> Old md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver> New md5 checksum 102d6bad8486219f6f9aeda15afbb198 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriver.sh

PRDriver>

PRDriver> Old md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver> New md5 checksum c211f0c5da55afedac3f8142dda59f45 for /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriverMerge.py

PRDriver>

PRDriver> Driver and Merge scripts unchanged, proceeding to TEST phase

PRDriver>

PRDriver>

PRDriver> Execute Test Command: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug/Trilinos/cmake/std/PullRequestLinuxDriverTest.py https://github.com/Tech-XCorp/Trilinos fixDirectoryComm https://github.com/trilinos/Trilinos master Trilinos_pullrequest_gcc_7.2.0_debug 8045 449 /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug

PRDriver>


==========================================================================================

Jenkins Input Variables:


    

  • JOB_BASE_NAME: Trilinos_pullrequest_gcc_7.2.0_debug
    • 

  • WORKSPACE    : /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0_debug
    • 



==========================================================================================

Parameters:



==========================================================================================


NOTICE: Destination branch is trilinos/Trilnos::master

ERROR : Source branch is NOT trilinos/Trilinos::master_merge_YYYYMMDD_HHMMSS

: This violates Trilinos policy, pull requests into the master branch are restricted.

: Perhaps you forgot to specify the develop branch as the target in your PR?


Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE


CDash Test Results for PR# 8045.


Wiki: How to Reproduce PR Testing Builds and Errors.

@trilinos-autotester trilinos-autotester removed the AT: RETEST Causes the PR autotester to run a new round of PR tests on the next iteration label Sep 23, 2020
@MicheldeMessieres MicheldeMessieres changed the base branch from master to develop September 23, 2020 17:34
@MicheldeMessieres MicheldeMessieres dismissed kddevin’s stale review September 23, 2020 17:34

The base branch was changed.

@trilinos-autotester
Copy link
Contributor

Status Flag 'Pre-Test Inspection' - - This Pull Request Requires Inspection... The code must be inspected by a member of the Team before Testing/Merging
THE LAST COMMIT TO THIS PULL REQUEST HAS BEEN REVIEWED, BUT NOT ACCEPTED OR REQUIRES CHANGES

@trilinos-autotester
Copy link
Contributor

Status Flag 'Pre-Test Inspection' - SUCCESS: The last commit to this Pull Request has been INSPECTED AND APPROVED by [ kddevin ]!

@trilinos-autotester
Copy link
Contributor

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

  • Build Num: 8003
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
COMPILER_MODULE sems-gcc/4.8.4
JENKINS_BUILD_TYPE Release
JENKINS_COMM_TYPE MPI
JENKINS_DO_COMPLEX OFF
JENKINS_JOB_TYPE Experimental
MPI_MODULE sems-openmpi/1.8.7
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

  • Build Num: 7819
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

  • Build Num: 6235
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0_debug

  • Build Num: 455
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

  • Build Num: 2276
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

  • Build Num: 5572
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_clang_10.0.0

  • Build Num: 721
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_python_2

  • Build Num: 3531
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_python_3

  • Build Num: 3562
  • Status: STARTED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Using Repos:

Repo: TRILINOS (Tech-XCorp/Trilinos)
  • Branch: fixDirectoryComm
  • SHA: 82f8b7b
  • Mode: TEST_REPO

Pull Request Author: MicheldeMessieres

@trilinos-autotester
Copy link
Contributor

Status Flag 'Pull Request AutoTester' - Jenkins Testing: all Jobs PASSED

Pull Request Auto Testing has PASSED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

  • Build Num: 8003
  • Status: PASSED

Jenkins Parameters

Parameter Name Value
COMPILER_MODULE sems-gcc/4.8.4
JENKINS_BUILD_TYPE Release
JENKINS_COMM_TYPE MPI
JENKINS_DO_COMPLEX OFF
JENKINS_JOB_TYPE Experimental
MPI_MODULE sems-openmpi/1.8.7
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

  • Build Num: 7819
  • Status: PASSED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

  • Build Num: 6235
  • Status: PASSED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0_debug

  • Build Num: 455
  • Status: PASSED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

  • Build Num: 2276
  • Status: PASSED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

  • Build Num: 5572
  • Status: PASSED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_clang_10.0.0

  • Build Num: 721
  • Status: PASSED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_python_2

  • Build Num: 3531
  • Status: PASSED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25

Build Information

Test Name: Trilinos_pullrequest_python_3

  • Build Num: 3562
  • Status: PASSED

Jenkins Parameters

Parameter Name Value
PR_LABELS pkg: Zoltan2
PULLREQUESTNUM 8045
TEST_REPO_ALIAS TRILINOS
TRILINOS_SOURCE_BRANCH fixDirectoryComm
TRILINOS_SOURCE_REPO https://github.com/Tech-XCorp/Trilinos
TRILINOS_SOURCE_SHA 82f8b7b
TRILINOS_TARGET_BRANCH develop
TRILINOS_TARGET_REPO https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA 7c42e25


CDash Test Results for PR# 8045.

@trilinos-autotester
Copy link
Contributor

Status Flag 'Pre-Merge Inspection' - SUCCESS: The last commit to this Pull Request has been INSPECTED AND APPROVED by [ kddevin ]!

@trilinos-autotester
Copy link
Contributor

Status Flag 'Pull Request AutoTester' - AutoMerge IS ENABLED, but the Label AT: AUTOMERGE is not set. Either set Label AT: AUTOMERGE or manually merge the PR...

@MicheldeMessieres MicheldeMessieres merged commit 09c3481 into trilinos:develop Sep 24, 2020
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers

@kddevin kddevin kddevin approved these changes

Assignees
No one assigned
Labels
pkg: Zoltan2
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
3 participants
@MicheldeMessieres @trilinos-autotester @kddevin