Update MMIO peripheral docs

docs/Customization/Incorporating-Verilog-Blocks.rst

@@ -99,10 +99,16 @@ Instantiating the BlackBox and Defining MMIO
 
 Next, we must instantiate the blackbox. In order to take advantage of
 diplomatic memory mapping on the system bus, we still have to
-integrate the peripheral at the Chisel level by mixing
-peripheral-specific traits into a ``TLRegisterRouter``. The ``params``
-member and ``HasRegMap`` base trait should look familiar from the
-previous memory-mapped GCD device example.
+integrate the peripheral at the Chisel level by instantiating a LazyModule wrapper
+that instantiates a TileLink RegisterNode.
+
+.. literalinclude:: ../../generators/chipyard/src/main/scala/example/GCD.scala
+    :language: scala
+    :start-after: DOC include start: GCD router
+    :end-before: DOC include end: GCD router
+
+Within the LazyModule, the ``regmap`` function can be called to attach wires and
+registers to the MMIO port.
 
 .. literalinclude:: ../../generators/chipyard/src/main/scala/example/GCD.scala
     :language: scala

docs/Customization/MMIO-Peripherals.rst

@@ -3,9 +3,9 @@
 MMIO Peripherals
 ==================
 
-The easiest way to create a MMIO peripheral is to use the ``TLRegisterRouter`` or ``AXI4RegisterRouter`` widgets, which abstracts away the details of handling the interconnect protocols and provides a convenient interface for specifying memory-mapped registers. Since Chipyard and Rocket Chip SoCs primarily use Tilelink as the on-chip interconnect protocol, this section will primarily focus on designing Tilelink-based peripherals. However, see ``generators/chipyard/src/main/scala/example/GCD.scala`` for how an example AXI4 based peripheral is defined and connected to the Tilelink graph through converters.
+The easiest way to create a MMIO peripheral is to follow the GCD TileLink MMIO example. Since Chipyard and Rocket Chip SoCs primarily use Tilelink as the on-chip interconnect protocol, this section will primarily focus on designing Tilelink-based peripherals. However, see ``generators/chipyard/src/main/scala/example/GCD.scala`` for how an example AXI4 based peripheral is defined and connected to the Tilelink graph through converters.
 
-To create a RegisterRouter-based peripheral, you will need to specify a parameter case class for the configuration settings, a bundle trait with the extra top-level ports, and a module implementation containing the actual RTL.
+To create a MMIO-mapped peripheral, you will need to specify a ``LazyModule`` wrapper containing the TileLink port as a Diplomacy Node, as well as an internal ``LazyModuleImp`` class that defines the MMIO's implementation and any non-TileLink I/O.
 
 For this example, we will show how to connect a MMIO peripheral which computes the GCD.
 The full code can be found in ``generators/chipyard/src/main/scala/example/GCD.scala``.
@@ -70,17 +70,14 @@ Top-level Traits
 ----------------
 
 After creating the module, we need to hook it up to our SoC.
-The ``LazyModule`` trait runs setup code that must execute before all the hardware gets elaborated.
-For a simple memory-mapped peripheral, this just involves connecting the peripheral's TileLink node to the relevant bus.
+The ``LazyModule`` abstract class containst the TileLink node representing the peripheral's I/O.
+For a simple memory-mapped peripheral, connecting the peripheral's TileLink node must be connected to the relevant bu.
 
 .. literalinclude:: ../../generators/chipyard/src/main/scala/example/GCD.scala
     :language: scala
     :start-after: DOC include start: GCD lazy trait
     :end-before: DOC include end: GCD lazy trait
 
-Note that the ``GCDTL`` class we created from the register router is itself a ``LazyModule``.
-Register routers have a TileLink node simply named "node", which we can hook up to the Rocket Chip bus.
-This will automatically add address map and device tree entries for the peripheral.
 Also observe how we have to place additional AXI4 buffers and converters for the AXI4 version of this peripheral.
 
 Peripherals which expose I/O can use `InModuleBody` to punch their I/O to the `DigitalTop` module.

docs/TileLink-Diplomacy-Reference/NodeTypes.rst

@@ -134,7 +134,7 @@ to handle TileLink requests, it is usually much easier to use a register node.
 This type of node provides a ``regmap`` method that allows you to specify
 control/status registers and automatically generates the logic to handle the
 TileLink protocol. More information about how to use register nodes can be
-found in :ref:`TileLink-Diplomacy-Reference/Register-Router:Register Router`.
+found in :ref:`TileLink-Diplomacy-Reference/Register-Node:Register Node`.
 
 Identity Node
 -------------

docs/TileLink-Diplomacy-Reference/Register-Router.rst → docs/TileLink-Diplomacy-Reference/Register-Node.rst

@@ -1,4 +1,4 @@
-Register Router
+Register Node
 ===============
 
 Memory-mapped devices generally follow a common pattern. They expose a set
@@ -10,10 +10,7 @@ While designers can manually instantiate a manager node and write the logic
 for exposing registers themselves, it's much easier to use RocketChip's
 ``regmap`` interface, which can generate most of the glue logic.
 
-For TileLink devices, you can use the ``regmap`` interface by extending
-the ``TLRegisterRouter`` class, as shown in :ref:`mmio-accelerators`,
-or you can create a regular LazyModule and instantiate a ``TLRegisterNode``.
-This section will focus on the second method.
+For TileLink devices, you can use the ``regmap`` interface of the ``TLRegisterNode``.
 
 Basic Usage
 -----------
@@ -32,7 +29,7 @@ The default value is 4 bytes. The ``concurrency`` argument is the size of the
 internal queue for TileLink requests. By default, this value is 0, which means
 there will be no queue. This value must be greater than 0 if you wish to
 decoupled requests and responses for register accesses. This is discussed
-in :ref:`TileLink-Diplomacy-Reference/Register-Router:Using Functions`.
+in :ref:`TileLink-Diplomacy-Reference/Register-Node:Using Functions`.
 
 The main way to interact with the node is to call the ``regmap`` method, which
 takes a sequence of pairs. The first element of the pair is an offset from the
@@ -123,12 +120,12 @@ output for write.
 In order to use this variant, you need to set ``concurrency`` to a value
 larger than 0.
 
-Register Routers for Other Protocols
+Register Nodes for Other Protocols
 ------------------------------------
 
-One useful feature of the register router interface is that you can easily
+One useful feature of the register node interface is that you can easily
 change the protocol being used. For instance, in the first example in
-:ref:`TileLink-Diplomacy-Reference/Register-Router:Basic Usage`, you could simply change the ``TLRegisterNode`` to
+:ref:`TileLink-Diplomacy-Reference/Register-Node:Basic Usage`, you could simply change the ``TLRegisterNode`` to
 and ``AXI4RegisterNode``.
 
 .. literalinclude:: ../../generators/chipyard/src/main/scala/example/RegisterNodeExample.scala

docs/TileLink-Diplomacy-Reference/index.rst

@@ -28,5 +28,5 @@ A detailed specification of the TileLink 1.7 protocol can be found on the
     NodeTypes
     Diplomacy-Connectors
     EdgeFunctions
-    Register-Router
+    Register-Node
     Widgets