Skip to content

uzh-rpg/rpg_dvs_evo_open

BranchesTags

Repository files navigation

EVO: Event based Visual Odometry

EVO: Event based Visual Odometry

Credit, License, and Patent

Citation

This code implements the event-based visual odometry pipeline described in the paper EVO: A Geometric Approach to Event-Based 6-DOF Parallel Tracking and Mapping in Real-time by Henri Rebecq, Timo Horstschaefer, Guillermo Gallego and Davide Scaramuzza.

If you use any of this code, please cite the following publications:

@Article{RebecqEVO,
  author        = {Rebecq, Henri and Horstschaefer, Timo and Gallego, Guillermo and Scaramuzza, Davide},
  journal       = {IEEE Robotics and Automation Letters}, 
  title         = {EVO: A Geometric Approach to Event-Based 6-DOF Parallel Tracking and Mapping in Real Time}, 
  year          = {2017},
  volume        = {2},
  number        = {2},
  pages         = {593-600},
  doi           = {10.1109/LRA.2016.2645143}
}
@InProceedings{Gehrig_2020_CVPR,
  author = {Daniel Gehrig and Mathias Gehrig and Javier Hidalgo-Carri\'o and Davide Scaramuzza},
  title = {Video to Events: Recycling Video Datasets for Event Cameras},
  booktitle = {{IEEE} Conf. Comput. Vis. Pattern Recog. (CVPR)},
  month = {June},
  year = {2020}
}

The code comes with a test dataset. If you don't have an event camera and want to run the code on more data, you can do one of the following:

Patent & License

  • The proposed EVO method is patented.

      H. Rebecq, G. Gallego, D. Scaramuzza
  Simultaneous Localization and Mapping with an Event Camera
  Pub. No.: WO/2018/037079.  International Application No.: PCT/EP2017/071331

  • The license is available here.

Acknowledgements

The open sourcing was curated by Antonio Terpin and Daniel Gehrig.

Table of contents

  1. Getting started
  2. Examples
  3. Running live
  4. Further improvements
  5. Additional resources on Event Cameras

Remark that this is research code, any fitness for a particular purpose is disclaimed.

Getting started

This software depends on ROS. Installation instructions can be found here. We have tested this software on Ubuntu 18.04 and ROS Melodic.

  1. Create and initialize a new catkin workspace if needed

     mkdir -p ~/catkin_ws/src && cd ~/catkin_ws/
 catkin config \
     --init --mkdirs --extend /opt/ros/melodic \
     --merge-devel --cmake-args \
     -DCMAKE_BUILD_TYPE=Release

  2. Clone this repository

     cd src/ && git clone git@github.com:uzh-rpg/rpg_dvs_evo_open.git

  3. Clone (and fix) dependencies

     ./rpg_dvs_evo_open/install.sh [ros-version] # [ros-version]: melodic, ..

    Substitute [ros-version] with your actual ROS distribution. For instance:

     ./rpg_dvs_evo_open/install.sh melodic

    Make sure to install ROS and the commonly used packages (such as rviz, rqt, ..).

    The above commands do the following:

    • First, we install the required packages.

    • Second, we clone the repositories evo relies on.

    Remark that with the above commands we install also the dependencies required to run the pipeline live. If you do not need them, you can comment the unnecessary packages from the dependencies.yaml file (davis driver).

    Please refer to this repo if there are issues with the driver installation (required for the live).

  4. Build the packages

     catkin build dvs_tracking

Building everything might take some time... this might be the right time for a coffee! :)

... and do not forget to source the workspace afterwards!

source ../devel/setup.bash

Examples

EVO: Event based Visual Odometry

Example Launch file Rosbag
Multi-keyframe sequence flyingroom.launch 538 MB
Desk sequence desk.launch 145 MB

To download the rosbags, you can use the following command:

wget [rosbag link] -O /path/to/download/folder/

For instance, the following will download the multi-keyframe sequence rosbag:

wget http://rpg.ifi.uzh.ch/data/EVO/code_examples/evo_flyingroom.bag -O /tmp/evo_flyingroom.bag

To run the pipeline from a rosbag, first start the pipeline as

roslaunch dvs_tracking [launch-file] auto_trigger:=true

where the specific launch file (fine-tuned) for each example is listed in the following table. The most interesting and repeatible one (due to the bootstrapping sequence, see further improvements) is the multi-keyframe sequence.

Then, once the everything is loaded, run the rosbag as

rosbag play -r 0.7 [rosbag-file]

For instance,

rosbag play -r 0.7 /tmp/evo_flyingroom.bag

Remark that we set the auto_trigger parameter to true. You can also set it to false and follow the instruction on how to run it live.

If anything fails, just try it again (give it a couple of chances!), and make sure to follow exactly the above instructions.

In the further improvements section are outlined the things that might go wrong when running the code. To improve the reliability when playing the rosbags (running live is easier), consider using -r .7, to reduce the rate. This helps especially when the hardware is not powerful enough.

For instance,

rosbag play /tmp/evo_flyingroom -r .7

Eventually, setting bootstrap_image_topic:=/dvs/image_raw will bootstrap from traditional frames and later switch to only events. This is the most reliable way currently available to bootstrap.

roslaunch dvs_tracking [launch-file] bootstrap_image_topic:=/dvs/image_raw auto_trigger:=true

Running live

Run

The procedure is analogous to the one explained in the examples:

  1. Run the ros core on the first terminal.

     roscore

  2. On a second terminal, launch the event camera driver.

     rosrun davis_ros_driver davis_ros_driver

  3. On another terminal, launch the pipeline, disabling the auto-triggering.

     roslaunch dvs_tracking live.launch auto_trigger:=false camera_name:=[calibration filename] events_topic:=[events topic]

    For instance:

     roslaunch dvs_tracking live.launch auto_trigger:=false camera_name:=DAVIS-ijrr events_topic:=/dvs/events

    If your calibrations filenames are my_camera.yaml, then use camera_name:=my_camera. Make sure to use the same name for both calibration files. If your sensor outputs events under the topic /my_sensor/events, then use events_topic:=/my_sensor/events.

    For the SVO based bootstrapper, proceed with step 4. For the fronto-planar bootstrapper, go to step 5. How to set up the fronto-planar bootstrapper is explained in the live.launch file.

    If you want to bootstrap from traditional frames, you can use the command:

     roslaunch dvs_tracking live.launch bootstrap_image_topic:=[topic raw frames] auto_trigger:=false

    For instance bootstrap_image_topic:=/dvs/image_raw.

    In this case, it makes sense to use the SVO-based bootstrapping only. This option is recommended to debug/improve/extend the rest of the EVO pipeline, without worrying about the quality of the bootstrapping.

  4. You should see two rqt GUI. One is the SVO GUI. Reset and start the pipeline until it tracks decently well. Make sure to set the namespace to svo.

  5. Press the Bootstrap button in the EVO GUI. This will automatically trigger the pipeline.

    Alternatively, it is also possible to trigger one module at the time:

    • Press the Start/Reset button in rqt_evo. Perform a circle (or more), and then press Update. This will trigger a map creation.
    • If the map looks correct, press Switch to tracking to start tracking with EVO. If not, reiterate the map creation.
    • As the camera moves out of the current map, the latter will be automatically updated if the Map-Expansion is enabled. You may disable Map-Expansion to track high-speed motions using the current map (single keyframe tracking).
    • The scene should have enough texture and the motions should recall the ones that you can see in the provided examples.

  6. If anything fails, just press Ctrl+C and restart the live node ;)

Some remarks:

  • The calibration files paths will be built as $(find dvs_tracking)/parameters/calib/ncamera/$(arg camera_name).yaml and $(find dvs_tracking)/parameters/calib/$(arg camera_name).yaml, where camera_name is specified as argument to the launch file. You can also set it as default in live.launch.
  • If your sensor provides frames under a topic /my_sensor/image_raw, and you want to bootstrap from the traditional frames, you can use bootstrap_image_topic:=/my_sensor/image_raw.

To run the pipeline live, first adjust the template live.launch to your sensor and scene. You can follow the following steps. Further customization, such as which bootstrapper to use, are explained in the launch file itself.

Calibration

Make sure you have updated calibration files for your event camera, in the dvs_tracking/parameters/calib folder.

Make sure your .yaml files have the same format as the provided ones (single camera format, multiple cameras format).

Remark that we have two calibration files in two different format for the same sensor. The single camera format has to be placed in the dvs_tracking/parameters/calib folder and the multiple cameras format in the dvs_tracking/parameters/calib/ncamera folder.

See this section for further references on calibration.

Tuning

Adjust the parameters in the launch file dvs_tracking/launch/template.launch.

Tuning is crucial for a good performance of the pipeline, in particular the min_depth and max_depth parameters in the mapping node, and the bootstrap node parameters.

An explanation of all the parameters for each module of the pipeline can be found in the Wiki.

The main parameters can be found in the template launch file, and are explained contextually. We still invite you to have a look at the Wiki, to discover further interesting features ;)

Module
Global parameters
Bootstrapping
Mapping
Tracking

If you are not using the fronto-planar bootstrapper, then you might need to tune SVO.

Remark that this might not be needed. You can test the svo tuning bootstrapping from traditional frames:

roslaunch dvs_tracking live.launch bootstrap_image_topic:=[topic of raw frames] auto_trigger:=[true/false]

For instance, bootstrap_image_topic:=/dvs/image_raw.

Further improvements

In the following we outline the main problems currently known and possible remedies. You are very welcome to contribute to this pipeline to make it even better!

What can go wrong TODO
Randomness due to OS scheduler, unreliable rosbags Implement rosbag data provider pattern, and ensure correctness of events consumption
Currently the pipeline uses multiple nodes. Switching to nodelets or using a single node could improve the repeatability of the rosbags.
Robustness bootstrapping: catch whenever SVO does not converge and trigger an automatic restart (what a human operator would eventually do manually).
tracking: catch whenever the tracker diverges, and re-initialize. Currently we have two parameters to predict this situation, namely min_map_size and min_n_keypoints.
Improve bootstrapping robustness Currently we have two working ways to bootstrap the pipeline from events: from SVO (feeding it with events frames) and with a fronto-planar assumption.
Reducing the assumptions required and making them more reliable would allow a better bootstrapping, reducing the gap to the bootstrapping from traditional frames (bootstrap_image_topic:=/dvs/image_raw).

Additional resources on Event Cameras

About

Implementation of EVO (RA-L 17)

Resources

Readme
Activity
Custom properties

Stars

169 stars

Watchers

11 watching

Forks

43 forks
Report repository

Releases

No releases published

Packages

No packages published

Contributors 3

  •  
  •  
  •  

Languages