Laravel SMS Sender

A Laravel SMS Gateway Integration package for bulk SMS providers in Ghana. Below are the gateways that are currently supported and others added in future updates.

Available features:

• Check remaining SMS balance or credits
• Send SMS messages
• Check SMS delivery status
• Send OTP messages

Supported gateways:

• SMS Online GH
• USMS-GH
• mNotify
• Arkesel
• More in future updates

System Requirements

• PHP 7.2 or greater
• Laravel 7 or greater

Installation

You can install the package via composer:

composer require variablesign/sms

Configuration

Publish the sms config by running this command after installation:

php artisan vendor:publish --provider="VariableSign\Sms\SmsServiceProvider" --tag="config"

Head to config/sms.php to start editing the configuration settings. Change the default gateway by setting the value to any of the gateways defined in the list of gateways. You can however ever switch between gateways in your code which will ignore the default config value.

'default' => 'smsonlinegh',

The following shows the options for smsonlinegh gateway.

'gatways' => [
    'smsonlinegh' => [
        'endpoints' => [
            'send' => 'https://api.smsonlinegh.com/v4/message/sms/send',
            'balance' => 'https://api.smsonlinegh.com/v4/report/balance',
            'report' => 'https://api.smsonlinegh.com/v4/report/message/delivery',
        ],
        'key' => 'Your API Key',
        'sender' => 'Your Sender ID',
        'verify' => false, // (optional) Disable SSL verification for non-https endpoints
        'timeout' => 15, // (optional) The connection timeout in seconds
    ],
    ...
]

Usage

Checking SMS balance

You can check your SMS balance or credits by using any of the following.

use VariableSign\Sms\Facades\Sms;

// Using the default gateway
$response = Sms::balance();

// With another gateway
$response = Sms::via('mnotify')->balance();

Without facades

use VariableSign\Sms\Sms;

$response = (new Sms)->via('mnotify')->balance();

With helper function

$response = sms()->via('mnotify')->balance();

Returns an integer as the response or null as the default;

250

Sending SMS messages

You can send SMS messages by using any of the following.

use VariableSign\Sms\Facades\Sms;

// Using the default gateway
$response = Sms::to(['2332xxxxxxxx','2332xxxxxxxx'])
    ->message('Hi, we just want to thank you for using our service.')
    ->send();

// With another gateway
$response = Sms::via('arkesel')
    ->to(['2332xxxxxxxx','2332xxxxxxxx'])
    ->message('Hi, we just want to thank you for using our service.')
    ->send();

Without facades

use VariableSign\Sms\Sms;

$response = (new Sms)->via('arkesel')
    ->to(['2332xxxxxxxx','2332xxxxxxxx'])
    ->message('Hi, we just want to thank you for using our service.')
    ->send();

With helper function

$response = sms()->via('arkesel')
    ->to(['2332xxxxxxxx','2332xxxxxxxx'])
    ->message('Hi, we just want to thank you for using our service.')
    ->send();

Returns \Illuminate\Support\Collection as the response;

[
    {
        "id": "c61ff669-4bb1-41c1-97ea-11658dedafbd",
        "to": "2332xxxxxxxx",
        "message": "Hi, we just want to thank you for using our service.",
        "status": "submitted"
    },
    {
        "id": "572ae33d-3983-47a0-a1ac-6fc3efafac4f",
        "to": "2332xxxxxxxx",
        "message": "Hi, we just want to thank you for using our service.",
        "status": "submitted"
    }
]

Checking SMS delivery status

You can check the delivery status of submitted messages by using their message id.

use VariableSign\Sms\Facades\Sms;

// Using the default gateway
$response = Sms::report('c61ff669-4bb1-41c1-97ea-11658dedafbd');

// With another gateway
$response = Sms::via('arkesel')->report('c61ff669-4bb1-41c1-97ea-11658dedafbd');

Without facades

use VariableSign\Sms\Sms;

$response = (new Sms)->via('arkesel')->report('c61ff669-4bb1-41c1-97ea-11658dedafbd');

With helper function

$response = sms()->via('arkesel')->report('c61ff669-4bb1-41c1-97ea-11658dedafbd');

Returns \Illuminate\Support\Collection as the response;

[
    {
        "id": "c61ff669-4bb1-41c1-97ea-11658dedafbd",
        "to": "2332xxxxxxxx",
        "status": "delivered"
    }
]

Sending OTP messages

You can use our otp() method to generate and quickly send one-time-pin messages.

use VariableSign\Sms\Facades\Sms;

// Can also be initialized without facades or with the helper function
$response = Sms::via('arkesel')
    ->to(['+2332xxxxxxxx'])
    ->otp('Password Reset', now()->addMinutes(5)->addSecond());

Returns \Illuminate\Support\Collection as the response;

[
    {
        "id": "4180e0a9-71cb-41e2-aafe-1cb69c1545ea",
        "to": "2332xxxxxxxx",
        "message": "Your Password Reset OTP is 9826. It expires in 5 minutes.",
        "status": "submitted",
        "otp": "9826",
        "expires_at": "2022-06-08T20:00:53.000000Z"
    }
]

Without expiration time

use VariableSign\Sms\Facades\Sms;

// Can also be initialized without facades or with the helper function
$response = Sms::via('arkesel')->to(['+2332xxxxxxxx'])->otp('Password Reset');

Returns \Illuminate\Support\Collection as the response;

[
    {
        "id": "d570a041-a13c-4e11-8e78-0c7515729556",
        "to": "2332xxxxxxxx",
        "message": "Your Password Reset OTP is 9826.",
        "status": "submitted",
        "otp": "9826"
    }
]

Or with your own custom messages. Use the :code placeholder in your messages and it will be replaced with the generated OTP. You can generate a code length between 4 to 8. The example below generates a code length of 6.

use VariableSign\Sms\Facades\Sms;

// Can also be initialized without facades or with the helper function
$response = Sms::via('arkesel')
    ->to(['+2332xxxxxxxx'])
    ->message('Your phone number verification code is :code.')
    ->otp(null, now()->addMinutes(5)->addSecond(), 6);

Returns \Illuminate\Support\Collection as the response;

[
    {
        "id": "e1ee89b2-05c7-454a-bf52-3ffe243aee1b",
        "to": "2332xxxxxxxx",
        "message": "Your phone number verification code is 803501. It expires in 5 minutes.",
        "status": "submitted",
        "otp": "803501",
        "expires_at": "2022-06-08T19:49:36.000000Z"
    }
]

Channel Usage

You can also send SMS messages through Laravel's notification class using php artisan make:notification command via sms or SmsChannel::class as the channel. If you want to change the sms channel name or disable it from being registered, you can do so in the config file.

namespace App\Notifications;

use Illuminate\Bus\Queueable;
use VariableSign\Sms\Channels\SmsChannel;
use Illuminate\Notifications\Notification;

class PaymentNotification extends Notification
{
    use Queueable;

    /**
     * Get the notification's delivery channels.
     *
     * @param  mixed  $notifiable
     * @return array
     */
    public function via($notifiable)
    {
        return ['sms']; // or SmsChannel::class
    }

    /**
     * Get the sms representation of the notification.
     *
     * @param  mixed  $notifiable
     * @return \VariableSign\Sms\Sms
     */
    public function toSms($notifiable)
    {
        return sms()
            ->via('smsonlinegh') // optional
            ->to($notifiable->phone)
            ->message('Your payment of 750.00 for order #10045 was successful.');
    }
}

Sending the notification:

$user->notify(new PaymentNotification);

Notification channel response

You can learn how to retrieve the response through the NotificationSent event from the Notification section of the Laravel docs.

Debugging

You can die dump the raw api response by adding the dd() method.

use VariableSign\Sms\Facades\Sms;

// Returns the unformatted response from the api endpoint
$response = Sms::dd()->via('usmsgh')->balance();

Testing

composer test

Changelog

Please see CHANGELOG for more information what has changed recently.

Contributing

Please see CONTRIBUTING for details.

Security

If you discover any security related issues, please email variablesign@gmail.com instead of using the issue tracker.

Credits

• Variable Sign
• All Contributors

License

The MIT License (MIT). Please see License File for more information.