[pull] master from torvalds:master #334
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
…re_irqs() Since commit 5fe71d2 ("irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device"), some of the devices are wrongly marked as "shared" by the ITS driver on systems equipped with the ITS(es). The problem is that the @info->flags may not be initialized anywhere and we end up looking at random bits on the stack. That's obviously not good. We can perform the initialization in the IRQ core layer before calling msi_domain_prepare_irqs(), which is neat enough. Fixes: 5fe71d2 ("irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201218060039.1770-1-yuzenghui@huawei.com
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201214133530.3783-1-zhengyongjun3@huawei.com
…ercpu_devid_irq It appears that despite its name, the bcm2836_arm_irqchip_ipi_eoi() callback is an acknowledgement, and not an EOI. This means that we lose IPIs that are made pending between the handling of the IPI and the write to LOCAL_MAILBOX0_CLR0. With the right timing, things fail nicely. This used to work with handle_percpu_devid_fasteoi_ipi(), which started by eoi-ing the interrupt. With the standard fasteoi flow, this doesn't work anymore. So let's use this callback for what it is, an ack. Your favourite RPi-2/3 is back up and running. Fixes: ffdad79 ("irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()") Cc: Valentin Schneider <valentin.schneider@arm.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/c9fb4ab3-a5cb-648c-6de3-c6a871e60870@roeck-us.net
…s_affinity() The current check of nvec < minvec for nvec returned from platform_irq_count() will not detect a negative error code in nvec. This is because minvec is unsigned, and, as such, nvec is promoted to unsigned in that check, which will make it a huge number (if it contained -EPROBE_DEFER). In practice, an error should not occur in nvec for the only in-tree user, but add a check anyway. Fixes: e15f2fa ("driver core: platform: Add devm_platform_get_irqs_affinity()") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1608561055-231244-1-git-send-email-john.garry@huawei.com
Commit c685af1 ("serial: mvebu-uart: fix tx lost characters") fixed tx lost characters at low baud rates but started causing tx lost characters when kernel is going to power off or reboot. TX_EMP tells us when transmit queue is empty therefore all characters were transmitted. TX_RDY tells us when CPU can send a new character. Therefore we need to use different check prior transmitting new character and different check after all characters were sent. This patch splits polling code into two functions: wait_for_xmitr() which waits for TX_RDY and wait_for_xmite() which waits for TX_EMP. When rebooting A3720 platform without this patch on UART is print only: [ 42.699� And with this patch on UART is full output: [ 39.530216] reboot: Restarting system Fixes: c685af1 ("serial: mvebu-uart: fix tx lost characters") Signed-off-by: Pali Rohár <pali@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201223191931.18343-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently drivers/phy/ingenic/Makefile adds phy-ingenic-usb to targets not depending on actual Kconfig symbol CONFIG_PHY_INGENIC_USB, so this driver always gets built[-in] on every system. Add missing dependency. Fixes: 31de313 ("PHY: Ingenic: Add USB PHY driver using generic PHY framework.") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Link: https://lore.kernel.org/r/20201222131021.4751-1-alobakin@pm.me Signed-off-by: Vinod Koul <vkoul@kernel.org>
The memory for struct clk_bulk_data should not be static which will be written during the clk_bulk_get. It fixed below oops when loading cdns3-imx as module. [ 17.272605] Unable to handle kernel write to read-only memory at virtual address ffff8000092a5398 [ 17.299730] Mem abort info: [ 17.313542] unregister ISI channel: mxc_isi.4 [ 17.324076] ESR = 0x9600004f [ 17.344658] EC = 0x25: DABT (current EL), IL = 32 bits [ 17.402055] SET = 0, FnV = 0 [ 17.404321] mxs_phy 5b100000.usbphy: supply phy-3p0 not found, using dummy regulator [ 17.405121] EA = 0, S1PTW = 0 [ 17.405133] Data abort info: [ 17.496231] ISV = 0, ISS = 0x0000004f [ 17.510871] CM = 0, WnR = 1 [ 17.533542] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081ea5000 [ 17.545709] [ffff8000092a5398] pgd=00000008bffff003, p4d=00000008bffff003, pud=00000008bfffe003, pmd=0000000885041003, pte=006000088513b783 [ 17.573521] Internal error: Oops: 9600004f [#1] PREEMPT SMP [ 17.579113] Modules linked in: usbmisc_imx phy_mxs_usb phy_cadence_salvo cdns3_imx(+) tcpci imx8_media_dev(C) caam error [ 17.590044] CPU: 2 PID: 253 Comm: systemd-udevd Tainted: G C 5.10.0-rc4-04445-g11f3c3a29d0-dirty #19 [ 17.600488] Hardware name: Freescale i.MX8QXP MEK (DT) [ 17.605633] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--) [ 17.611662] pc : __clk_bulk_get+0x48/0x130 [ 17.615786] lr : clk_bulk_get+0x18/0x20 [ 17.619634] sp : ffff80001369b880 [ 17.622953] x29: ffff80001369b880 x28: 0000000000000013 [ 17.628277] x27: 0000000000000100 x26: ffff00080553b100 [ 17.633602] x25: ffff80001229b4d8 x24: 0000000000000000 [ 17.638928] x23: ffff000800665410 x22: 0000000000000005 [ 17.644275] x21: ffff8000092a5390 x20: ffff000800665400 [ 17.649605] x19: ffff000804e6f980 x18: 000000005b110000 [ 17.654946] x17: 0000000000000000 x16: 0000000000000000 [ 17.660274] x15: ffff800011989100 x14: 0000000000000000 [ 17.665599] x13: ffff800013ce1000 x12: ffff800013ca1000 [ 17.670924] x11: 000000005b110000 x10: 0000000000000000 [ 17.676249] x9 : ffff8000106c5a30 x8 : ffff000804e6fa00 [ 17.681575] x7 : 0000000000000000 x6 : 000000000000003f [ 17.686901] x5 : 0000000000000040 x4 : ffff80001369b8b0 [ 17.692228] x3 : ffff8000092a5398 x2 : ffff8000092a5390 [ 17.697574] x1 : ffff8000092a53e8 x0 : 0000000000000004 [ 17.702905] Call trace: [ 17.705366] __clk_bulk_get+0x48/0x130 [ 17.709125] clk_bulk_get+0x18/0x20 [ 17.712620] devm_clk_bulk_get+0x58/0xb8 [ 17.716563] cdns_imx_probe+0x84/0x1f0 [cdns3_imx] [ 17.721363] platform_drv_probe+0x58/0xa8 [ 17.725381] really_probe+0xec/0x4c8 [ 17.728967] driver_probe_device+0xf4/0x160 [ 17.733160] device_driver_attach+0x74/0x80 [ 17.737355] __driver_attach+0xa4/0x170 [ 17.741202] bus_for_each_dev+0x74/0xc8 [ 17.745043] driver_attach+0x28/0x30 [ 17.748620] bus_add_driver+0x144/0x228 [ 17.752462] driver_register+0x68/0x118 [ 17.756308] __platform_driver_register+0x4c/0x58 [ 17.761022] cdns_imx_driver_init+0x24/0x1000 [cdns3_imx] [ 17.766434] do_one_initcall+0x48/0x2c0 [ 17.770280] do_init_module+0x5c/0x220 [ 17.774029] load_module+0x210c/0x2858 [ 17.777784] __do_sys_finit_module+0xb8/0x120 [ 17.782148] __arm64_sys_finit_module+0x24/0x30 [ 17.786691] el0_svc_common.constprop.0+0x70/0x168 [ 17.791497] do_el0_svc+0x28/0x88 [ 17.794822] el0_sync_handler+0x158/0x160 [ 17.798833] el0_sync+0x140/0x180 [ 17.802158] Code: aa0203f5 91002043 8b205021 a90153f3 (f801047f) Cc: <stable@vger.kernel.org> Fixes: 1e056ef ("usb: cdns3: add NXP imx8qm glue layer") Signed-off-by: Peter Chen <peter.chen@nxp.com>
The cdns3 core device is populated by calling of_platform_populate, the flag OF_POPULATED is set for core device node, if this flag is not cleared, when calling of_platform_populate the second time after loading parent module again, the OF code will not try to create platform device for core device. To fix it, it uses of_platform_depopulate to depopulate the core device which the parent created, and the flag OF_POPULATED for core device node will be cleared accordingly. Cc: <stable@vger.kernel.org> Fixes: 1e056ef ("usb: cdns3: add NXP imx8qm glue layer") Signed-off-by: Peter Chen <peter.chen@nxp.com>
Keep the runtime active during the remove operation, and disable related clocks. Signed-off-by: Peter Chen <peter.chen@nxp.com>
Updates my email address for Cadence USB3 driver. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
On deferred probe, we will get the following splat: cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID IIO: -517 WARNING: CPU: 0 PID: 21 at drivers/regulator/core.c:2123 regulator_put+0x68/0x78 ... (regulator_put) from [<c068ebf0>] (release_nodes+0x1b4/0x1fc) (release_nodes) from [<c068a9a4>] (really_probe+0x104/0x4a0) (really_probe) from [<c068b034>] (driver_probe_device+0x58/0xb4) Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201230102105.11826-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Randconfig builds show another broken dependency: WARNING: unmet direct dependencies detected for PHY_MTK_MIPI_DSI Depends on [n]: ARCH_MEDIATEK [=n] && OF [=y] Selected by [m]: - DRM_MEDIATEK [=m] && HAS_IOMEM [=y] && DRM [=m] && (ARCH_MEDIATEK [=n] || ARM [=y] && COMPILE_TEST [=y]) && COMMON_CLK [=y] && HAVE_ARM_SMCCC [=y] && OF [=y] && MTK_MMSYS [=y] This is similar to the hdmi driver I fixed earlier, and I guess the common-clk bug would sooner or later also manifest here, so just use the exact same solution I chose for the other driver, and hope that any future drivers just copy it from here. Fixes: 90f80d9 ("phy: mediatek: Move mtk_mipi_dsi_phy driver into drivers/phy/mediatek folder") Fixes: f5f6e01 ("phy: mediatek: allow compile-testing the hdmi phy") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210103135524.3678664-1-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix build warnings as below:
>> drivers/irqchip/irq-loongson-liointc.c:134:12: warning: no previous prototype for 'liointc_of_init' [-Wmissing-prototypes]
134 | int __init liointc_of_init(struct device_node *node,
| ^~~~~~~~~~~~~~~
Fixes: dbb1522 ("irqchip: Add driver for Loongson I/O Local Interrupt Controller")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105025651.772024-1-chenhuacai@loongson.cn
The tb_dbg() call is using %#x that already adds the 0x prefix so don't duplicate it. Fixes: 9039387 ("thunderbolt: Add USB4 router operation proxy for firmware connection manager") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Using kernel.org as my email address. Signed-off-by: Peter Chen <peter.chen@nxp.com>
There will be memory leak if driver probe failed. Trace as below:
backtrace:
[<000000002415258f>] kmemleak_alloc+0x3c/0x50
[<00000000f447ebe4>] __kmalloc+0x208/0x530
[<0000000048bc7b3a>] of_dma_get_range+0xe4/0x1b0
[<0000000041e39065>] of_dma_configure_id+0x58/0x27c
[<000000006356866a>] platform_dma_configure+0x2c/0x40
......
[<000000000afcf9b5>] ret_from_fork+0x10/0x3c
This issue is introduced by commit e0d0727("dma-mapping:
introduce DMA range map, supplanting dma_pfn_offset "). It doesn't
free dma_range_map when driver probe failed and cause above
memory leak. So, add code to free it in error path.
Fixes: e0d0727 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset ")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Link: https://lore.kernel.org/r/20210105070927.14968-1-Meng.Li@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…s_affinity() The current check of nvec < minvec for nvec returned from platform_irq_count() will not detect a negative error code in nvec. This is because minvec is unsigned, and, as such, nvec is promoted to unsigned in that check, which will make it a huge number (if it contained -EPROBE_DEFER). In practice, an error should not occur in nvec for the only in-tree user, but add a check anyway. Fixes: e15f2fa ("driver core: platform: Add devm_platform_get_irqs_affinity()") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1608561055-231244-1-git-send-email-john.garry@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TI PRUSS INTC irqchip driver handles the local interrupt controller which is a child device of it's parent PRUSS/ICSSG device. The driver was upstreamed in parallel with the PRUSS platform driver, and was configurable independently previously. The PRUSS interrupt controller is an integral part of the overall PRUSS software architecture, and is not useful at all by itself. Simplify the TI_PRUSS_INTC Kconfig dependencies by making it silent and selected automatically when the TI_PRUSS platform driver is enabled. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210108162901.6003-1-s-anna@ti.com
Since commit 5556797 ("genirq/irqdomain: Allow partial trimming of irq_data hierarchy") the irq_data chain is valided. The irq_domain_trim_hierarchy() function doesn't consider the irq + ipi domain hierarchy as valid, since the ipi domain has the irq domain set as parent, but the parent domain has no chip set. Hence the boot ends in a kernel panic. Set the chip for the parent domain as it is done in the mips gic irq driver, to have a valid irq_data chain. Fixes: 3838a54 ("irqchip: mips-cpu: Introduce IPI IRQ domain support") Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210107213603.1637781-1-dev@kresin.me
copy_siginfo_from_user_any() takes a userspace pointer as second argument; annotate the parameter type accordingly. Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20201207000252.138564-1-jannh@google.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
…atements
Fixed two coding style issues in kernel/fork.c
Do not use {} around single-line statements.
Cc: linux-kernel@vger.kernel.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Alexander Guril <alexander.guril02@gmail.com>
Link: https://lore.kernel.org/r/20201226114021.2589-1-alexander.guril02@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The old _do_fork() helper has been removed in favor of kernel_clone(). Here correct some comments which still contain _do_fork() Link: https://lore.kernel.org/r/20210111104807.18022-1-yanfei.xu@windriver.com Cc: christian@brauner.io Cc: linux-kernel@vger.kernel.org Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
…el/git/phy/linux-phy into char-misc-next Vinod writes: phy: fixes for 5.11 *) Fix Ingenic driver build *) Warning fix for cpcap-usb *) Compile test enabling for mediatek phy * tag 'phy-fixes-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: allow compile-testing the dsi phy phy: cpcap-usb: Fix warning for missing regulator_disable PHY: Ingenic: fix unconditional build of phy-ingenic-usb
Don't assume dest/source buffers are userspace addresses when manually
copying data for string I/O or MOVS MMIO, as {get,put}_user() will fail
if handed a kernel address and ultimately lead to a kernel panic.
When invoking INSB/OUTSB instructions in kernel space in a
SEV-ES-enabled VM, the kernel crashes with the following message:
"SEV-ES: Unsupported exception in #VC instruction emulation - can't continue"
Handle that case properly.
[ bp: Massage commit message. ]
Fixes: f980f9c ("x86/sev-es: Compile early handler code into kernel image")
Signed-off-by: Hyunwook (Wooky) Baek <baekhw@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Link: https://lkml.kernel.org/r/20210110071102.2576186-1-baekhw@google.com
Set the maximum DIE per package variable on AMD using the NodesPerProcessor topology value. This will be used by RAPL, among others, to determine the maximum number of DIEs on the system in order to do per-DIE manipulations. [ bp: Productize into a proper patch. ] Fixes: 028c221 ("x86/CPU/AMD: Save AMD NodeId as cpu_die_id") Reported-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at> Reported-by: Rafael Kitover <rkitover@gmail.com> Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at> Tested-by: Rafael Kitover <rkitover@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=210939 Link: https://lkml.kernel.org/r/20210106112106.GE5729@zn.tnic Link: https://lkml.kernel.org/r/20210111101455.1194-1-bp@alien8.de
When doing dma_alloc_coherent in the driver, we add a certain hard-coded offset to the DMA address before returning to the callee function. This offset is needed when our device use this DMA address to perform outbound transactions to the host. However, if we want to map the DMA'able memory to the user via dma_mmap_coherent(), we need to pass the original dma address, without this offset. Otherwise, we will get erronouos mapping. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are some points in the reset process where if the code fails for some reason, and the system admin tries to initiate the reset process again we will get a kernel panic. This is because there aren't any protections in different fini functions that are called during the reset process. The protections that are added in this patch make sure that if the fini functions are called multiple times, without calling init functions between them, there won't be double release of already released resources. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When using Deep learning framework such as tensorflow or pytorch, there are tens of thousands of host memory mappings. When the user frees all those mappings at the same time, the process of unmapping and unpinning them can take a long time, which may cause a soft lockup bug. To prevent this, we need to free the core to do other things during the unmapping process. For now, we chose to do it every 32K unmappings (each unmap is a single 4K page). Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
…l/git/peter.chen/usb into usb-linus Peter writes: - Several bug-fixes for cdns3 imx driver - Update Peter Chen and Roger Quadros email address * tag 'usb-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: MAINTAINERS: update Peter Chen's email address MAINTAINERS: Update address for Cadence USB3 driver usb: cdns3: imx: improve driver .remove API usb: cdns3: imx: fix can't create core device the second time issue usb: cdns3: imx: fix writing read-only memory issue
…/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fix for v5.11-rc4 This includes a single format string fix for the firmware connection manager USB4 NVM authentication proxy implementation introduced in this merge window. * tag 'thunderbolt-for-v5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Drop duplicated 0x prefix from format string
…linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new Intel model number for Alder Lake
- Differentiate which aspects of the FPU state get saved/restored when
the FPU is used in-kernel and fix a boot crash on K7 due to early
MXCSR access before CR4.OSFXSR is even set.
- A couple of noinstr annotation fixes
- Correct die ID setting on AMD for users of topology information which
need the correct die ID
- A SEV-ES fix to handle string port IO to/from kernel memory properly
* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add another Alder Lake CPU to the Intel family
x86/mmx: Use KFPU_387 for MMX string operations
x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
x86/topology: Make __max_die_per_package available unconditionally
x86: __always_inline __{rd,wr}msr()
x86/mce: Remove explicit/superfluous tracing
locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
locking/lockdep: Cure noinstr fail
x86/sev: Fix nonistr violation
x86/entry: Fix noinstr fail
x86/cpu/amd: Set __max_die_per_package on AMD
x86/sev-es: Handle string port IO to kernel memory properly
…cm/linux/kernel/git/tip/tip Pull timer fixes from Borislav Petkov: - Fix an integer overflow in the NTP RTC synchronization which led to the latter happening every 2 seconds instead of the intended every 11 minutes. - Get rid of now unused get_seconds(). * tag 'timers_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp: Fix RTC synchronization on 32-bit platforms timekeeping: Remove unused get_seconds()
…m/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Correct the marking of kthreads which are supposed to run on a specific, single CPU vs such which are affine to only one CPU, mark per-cpu workqueue threads as such and make sure that marking "survives" CPU hotplug. Fix CPU hotplug issues with such kthreads. - A fix to not push away tasks on CPUs coming online. - Have workqueue CPU hotplug code use cpu_possible_mask when breaking affinity on CPU offlining so that pending workers can finish on newly arrived onlined CPUs too. - Dump tasks which haven't vacated a CPU which is currently being unplugged. - Register a special scale invariance callback which gets called on resume from RAM to read out APERF/MPERF after resume and thus make the schedutil scaling governor more precise. * tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Relax the set_cpus_allowed_ptr() semantics sched: Fix CPU hotplug / tighten is_per_cpu_kthread() sched: Prepare to use balance_push in ttwu() workqueue: Restrict affinity change to rescuer workqueue: Tag bound workers with KTHREAD_IS_PER_CPU kthread: Extract KTHREAD_IS_PER_CPU sched: Don't run cpu-online with balance_push() enabled workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity sched/core: Print out straggler tasks in sched_cpu_dying() x86: PM: Register syscore_ops for scale invariance
…scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: - Adjust objtool to handle a recent binutils change to not generate unused symbols anymore. - Revert the fail-the-build-on-fatal-errors objtool strategy for now due to the ever-increasing matrix of supported toolchains/plugins and them causing too many such fatal errors currently. - Do not add empty symbols to objdump's rbtree to accommodate clang removing section symbols. * tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Don't fail on missing symbol table objtool: Don't fail the kernel build on fatal errors objtool: Don't add empty symbols to the rbtree
…linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy. - Fix to not lose IPIs on bcm2836. - Fix for a bogus marking of ITS devices as shared due to unitialized stack variable. - Clear a phantom interrupt on qcom-pdc to unblock suspend. - Small cleanups, warning and build fixes. * tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Export irq_check_status_bit() irqchip/mips-cpu: Set IPI domain parent chip irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig irqchip/loongson-liointc: Fix build warnings driver core: platform: Add extra error check in devm_platform_get_irqs_affinity() irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq irqchip/irq-sl28cpld: Convert comma to semicolon genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()
During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.
In the test case for kasan_remove_zero_shadow():
shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000
3-level page table:
PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K
0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.
In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.
Fix by correcting the condition when next and addr are neither aligned.
Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kasan_remove_zero_shadow() shall use original virtual address, start and size, instead of shadow address. Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com Fixes: 0207df4 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN") Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The initially proposed KASAN command line parameters are redundant. This change drops the complex "kasan.mode=off/prod/full" parameter and adds a simpler kill switch "kasan=off/on" instead. The new parameter together with the already existing ones provides a cleaner way to express the same set of features. The full set of parameters with this change: kasan=off/on - whether KASAN is enabled kasan.fault=report/panic - whether to only print a report or also panic kasan.stacktrace=off/on - whether to collect alloc/free stack traces Default values: kasan=on kasan.fault=report kasan.stacktrace=on (if CONFIG_DEBUG_KERNEL=y) kasan.stacktrace=off (otherwise) Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8 Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few places where SLUB accesses object's data or metadata were missed in a previous patch. This leads to false positives with hardware tag-based KASAN when bulk allocations are used with init_on_alloc/free. Fix the false-positives by resetting pointer tags during these accesses. (The kasan_reset_tag call is removed from slab_alloc_node, as it's added into maybe_wipe_obj_freeptr.) Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901 Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com Fixes: aa1ef4d ("kasan, mm: reset tags when accessing metadata") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A previous commit added resetting KASAN page tags to kernel_init_free_pages() to avoid false-positives due to accesses to metadata with the hardware tag-based mode. That commit did reset page tags before the metadata access, but didn't restore them after. As the result, KASAN fails to detect bad accesses to page_alloc allocations on some configurations. Fix this by recovering the tag after the metadata access. Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com Fixes: aa1ef4d ("kasan, mm: reset tags when accessing metadata") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building ubsan kernels even for compile-testing introduced these warnings in my randconfig environment: crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=] static void blake2b_compress(struct blake2b_state *S, crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=] static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src, lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=] static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10]) lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=] static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10]) Further testing showed that this is caused by -fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86 architecture. The one in blake2b immediately overflows the 8KB stack area architectures, so better ensure this never happens by disabling the option for 32-bit x86. Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/ Fixes: d0a3ac5 ("ubsan: enable for all*config builds") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Marco Elver <elver@google.com> Cc: George Popescu <georgepope@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The conversion to move pfn_to_online_page() internal to soft_offline_page() missed that the get_user_pages() reference taken by the madvise() path needs to be dropped when pfn_to_online_page() fails. Note the direct sysfs-path to soft_offline_page() does not perform a get_user_pages() lookup. When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page() pfn the kernel hangs at dax-device shutdown due to a leaked reference. Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: feec24a ("mm, soft-offline: convert parameter to pfn") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/highmem: Fix fallout from generic kmap_local conversions". The kmap_local conversion wreckaged sparc, mips and powerpc as it missed some of the details in the original implementation. This patch (of 4): The recent conversion to the generic kmap_local infrastructure failed to assign the proper pre/post map/unmap flush operations for sparc. Sparc requires cache flush before map/unmap and tlb flush afterwards. Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de Fixes: 3293efa ("sparc/mm/highmem: Switch to generic kmap atomic") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The generic kmap_local() map function uses set_pte_at(), but MIPS requires set_pte() and PowerPC wants __set_pte_at(). Provide arch_kmap_local_set_pte() and default it to set_pte_at(). Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
set_pte_at() on MIPS invokes update_cache() which might recurse into kmap_local(). Use set_pte() like the original MIPS highmem implementation did. Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de Fixes: a4c33e8 ("mips/mm/highmem: Switch to generic kmap atomic") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The original PowerPC highmem mapping function used __set_pte_at() to denote that the mapping is per CPU. This got lost with the conversion to the generic implementation. Override the default map function. Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de Fixes: 47da42b ("powerpc/mm/highmem: Switch to generic kmap atomic") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val). If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.
For example:
"hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
triggered. The call stack is as follows:
Kernel command line: .... hung_task_panic
......
Call trace:
__pi_strlen+0x10/0x98
parse_args+0x278/0x344
do_sysctl_args+0x8c/0xfc
kernel_init+0x5c/0xf4
ret_from_fork+0x10/0x30
To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().
Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The K: entry should ensure that Nick and I always get CC'd on patches that touch these files but it is better to be explicit rather than implicit. Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.com Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 5.11-rc5. They resolve: - xhci issues for some reported problems - ehci driver issue for one specific device - USB gadget fixes for some reported problems - cdns3 driver fixes for issues reported - MAINTAINERS file update - thunderbolt minor fix All of these have been in linux-next with no reported issues" * tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: bdc: Make bdc pci driver depend on BROKEN xhci: tegra: Delay for disabling LFPS detector xhci: make sure TRB is fully written before giving it to the controller usb: udc: core: Use lock when write to soft_connect USB: gadget: dummy-hcd: Fix errors in port-reset handling usb: gadget: aspeed: fix stop dma register setting. USB: ehci: fix an interrupt calltrace error ehci: fix EHCI host controller initialization sequence MAINTAINERS: update Peter Chen's email address thunderbolt: Drop duplicated 0x prefix from format string MAINTAINERS: Update address for Cadence USB3 driver usb: cdns3: imx: improve driver .remove API usb: cdns3: imx: fix can't create core device the second time issue usb: cdns3: imx: fix writing read-only memory issue
…/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are three small tty/serial fixes for 5.11-rc5 to resolve reported problems: - two patches to fix up writing to ttys with splice - mvebu-uart driver fix for reported problem All of these have been in linux-next with no reported problems" * tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix up hung_up_tty_write() conversion tty: implement write_iter serial: mvebu-uart: fix tx lost characters at power off
…rnel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are some IIO driver fixes for 5.11-rc5 to resolve some reported problems. Nothing major, just a few small fixes, all of these have been in linux-next for a while and full details are in the shortlog" * tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: sx9310: Fix semtech,avg-pos-strength setting when > 16 iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread iio: ad5504: Fix setting power-down state counter:ti-eqep: remove floor drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free() dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible iio: sx9310: Off by one in sx9310_read_thresh()
…x/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some machines
- device link device name collision problem fix (busses only have to
name devices unique to their bus, not unique to all busses)
- kernfs splice bugfixes to resolve firmware loading problems for
Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems"
* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link device name collision
driver core: Extend device_is_dependent()
kernfs: wire up ->splice_read and ->splice_write
kernfs: implement ->write_iter
kernfs: implement ->read_iter
Revert "driver core: Reorder devices on successful probe"
Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
drivers core: Free dma_range_map when driver probe failed
…kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.11-rc5: - habanalabs driver fixes - phy driver fixes - hwtracing driver fixes - rtsx cardreader driver fix All of these have been in linux-next with no reported issues" * tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: init value of aspm_enabled habanalabs: disable FW events on device removal habanalabs: fix backward compatibility of idle check habanalabs: zero pci counters packet before submit to FW intel_th: pci: Add Alder Lake-P support stm class: Fix module init return on allocation failure habanalabs: prevent soft lockup during unmap habanalabs: fix reset process in case of failures habanalabs: fix dma_addr passed to dma_mmap_coherent phy: mediatek: allow compile-testing the dsi phy phy: cpcap-usb: Fix warning for missing regulator_disable PHY: Ingenic: fix unconditional build of phy-ingenic-usb
Merge misc fixes from Andrew Morton: "18 patches. Subsystems affected by this patch series: mm (pagealloc, memcg, kasan, memory-failure, and highmem), ubsan, proc, and MAINTAINERS" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add a couple more files to the Clang/LLVM section proc_sysctl: fix oops caused by incorrect command parameters powerpc/mm/highmem: use __set_pte_at() for kmap_local() mips/mm/highmem: use set_pte() for kmap_local() mm/highmem: prepare for overriding set_pte_at() sparc/mm/highmem: flush cache and TLB mm: fix page reference leak in soft_offline_page() ubsan: disable unsigned-overflow check for i386 kasan, mm: fix resetting page_alloc tags for HW_TAGS kasan, mm: fix conflicts with init_on_alloc/free kasan: fix HW_TAGS boot parameters kasan: fix incorrect arguments passing in kasan_add_zero_shadow kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow mm: fix numa stats for thp migration mm: memcg: fix memcg file_dirty numa stat mm: memcg/slab: optimize objcg stock draining mm: fix initialization of struct page for holes in memory layout x86/setup: don't remove E820_TYPE_RAM for pfn 0
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix a status code in nvmet (Chaitanya Kulkarni)
- avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
- fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
- fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
- fix a double DMA unmap in nvme-pci
- lightnvm error path leak fix (Pan)
- MD pull request from Song:
- Flush request fix (Xiao)
* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
lightnvm: fix memory leak when submit fails
nvme-pci: fix error unwind in nvme_map_data
nvme-pci: refactor nvme_unmap_data
md: Set prev_flush_start and flush_bio in an atomic way
nvmet: set right status on error in id-ns handler
nvme-pci: allow use of cmb on v1.4 controllers
nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
nvme: check the PRINFO bit before deciding the host buffer length
Pull io_uring fixes from Jens Axboe: "Still need a final cancelation fix that isn't quite done done, expected in the next day or two. That said, this contains: - Wakeup fix for IOPOLL requests - SQPOLL split close op handling fix - Ensure that any use of io_uring fd itself is marked as inflight - Short non-regular file read fix (Pavel) - Fix up bad false positive warning (Pavel) - SQPOLL fixes (Pavel) - In-flight removal fix (Pavel)" * tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block: io_uring: account io_uring internal files as REQ_F_INFLIGHT io_uring: fix sleeping under spin in __io_clean_op io_uring: fix short read retries for non-reg files io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state io_uring: fix skipping disabling sqo on exec io_uring: fix uring_flush in exit_files() warning io_uring: fix false positive sqo warning on flush io_uring: iopoll requests should also wake task ->in_idle state
pull bot
pushed a commit
that referenced
this pull request
Jul 12, 2024
Add a test case which replaces an active ingress qdisc while keeping the miniq in-tact during the transition period to the new clsact qdisc. # ./vmtest.sh -- ./test_progs -t tc_link [...] ./test_progs -t tc_link [ 3.412871] bpf_testmod: loading out-of-tree module taints kernel. [ 3.413343] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #332 tc_links_after:OK #333 tc_links_append:OK #334 tc_links_basic:OK #335 tc_links_before:OK #336 tc_links_chain_classic:OK #337 tc_links_chain_mixed:OK #338 tc_links_dev_chain0:OK #339 tc_links_dev_cleanup:OK #340 tc_links_dev_mixed:OK #341 tc_links_ingress:OK #342 tc_links_invalid:OK #343 tc_links_prepend:OK #344 tc_links_replace:OK #345 tc_links_revision:OK Summary: 14/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240708133130.11609-2-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
pull bot
pushed a commit
that referenced
this pull request
Oct 19, 2024
Currently, there is no terminator entry for exynosautov920_cmu_of_match, hence facing below KASAN warning, BUG: KASAN: global-out-of-bounds in of_match_node+0x120/0x13c Read of size 1 at addr ffffffe31cc9e628 by task swapper/0/1 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0+ #334 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x90/0xd0 print_report+0x1f4/0x5b4 kasan_report+0xc8/0x110 __asan_report_load1_noabort+0x20/0x2c of_match_node+0x120/0x13c of_match_device+0x70/0xb4 platform_match+0xa0/0x25c __device_attach_driver+0x7c/0x2d4 bus_for_each_drv+0x100/0x188 __device_attach+0x174/0x364 device_initial_probe+0x14/0x20 bus_probe_device+0x128/0x158 device_add+0xb3c/0x10fc of_device_add+0xdc/0x150 of_platform_device_create_pdata+0x120/0x20c of_platform_bus_create+0x2bc/0x620 of_platform_populate+0x58/0x108 of_platform_default_populate_init+0x100/0x120 do_one_initcall+0x110/0x788 kernel_init_freeable+0x44c/0x61c kernel_init+0x24/0x1e4 ret_from_fork+0x10/0x20 The buggy address belongs to the variable: exynosautov920_cmu_of_match+0xc8/0x2c80 Add a dummy terminator entry at the end to assist of_match_node() in traversing up to the terminator entry without accessing an out-of-boundary index. Fixes: 485e13f ("clk: samsung: add top clock support for ExynosAuto v920 SoC") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20240927102104.3268790-1-ruanjinjie@huawei.com [krzk: drop trailing comma] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]
Can you help keep this open source service alive? 💖 Please sponsor : )