viniciusbn · viniciusbn · Jul 27, 2020 · Jul 17, 2020 · Jul 24, 2020 · Jul 24, 2020
diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml
@@ -1,3 +1,3 @@
 github: [thinkyhead]
 patreon: thinkyhead
-custom: ["http://www.thinkyhead.com/donate-to-marlin"]
+custom: ["https://www.thinkyhead.com/donate-to-marlin"]
diff --git a/.github/contributing.md b/.github/contributing.md
@@ -34,16 +34,15 @@ This project and everyone participating in it is governed by the [Marlin Code of
 
 We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
 
-* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
+* [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
 * [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
 
-If chat is more your speed, you can join the MarlinFirmware Slack team:
+If chat is more your speed, you can join the MarlinFirmware Discord server:
 
-* Join the Marlin Slack Team
-  * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
-  * Even though Slack is a chat service, sometimes it takes several hours for community members to respond &mdash; please be patient!
-  * Use the `#general` channel for general questions or discussion about Marlin.
-  * Other channels exist for certain topics. Check the channel list.
+* Use the link https://discord.gg/n5NJ59y to join up as a General User.
+* Even though our Discord is pretty active, it may take a while for community members to respond &mdash; please be patient!
+* Use the `#general` channel for general questions or discussion about Marlin.
+* Other channels exist for certain topics or are limited to Patrons. Check the channel list.
 
 ## How Can I Contribute?
 

diff --git a/.github/issue_template.md b/.github/issue_template.md
@@ -2,9 +2,13 @@
 
 Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
 
-Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead use one of the following options:
 
-Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
+- The Marlin Firmware forum at https://reprap.org/forum/list.php?415
+- The MarlinFirmware Facebook Group at https://www.facebook.com/groups/1049718498464482/
+- The MarlinFirmware Discord Server at https://discord.gg/n5NJ59y.
+
+Before filing an issue be sure to test the latest "bugfix" branch to see whether the issue is already addressed.
 
 -->
 

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -135,13 +135,13 @@
 //#define CUSTOM_MACHINE_NAME "3D Printer"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
-// Choose your own or use a service like http://www.uuidgenerator.net/version4
+// Choose your own or use a service like https://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
 // @section extruder
 
 // This defines the number of extruders
-// :[1, 2, 3, 4, 5, 6, 7, 8]
+// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
 #define EXTRUDERS 1
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
@@ -473,7 +473,7 @@
 //===========================================================================
 //============================= PID Settings ================================
 //===========================================================================
-// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
+// PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning
 
 // Comment the following line to disable PID and enable bang-bang.
 #define PIDTEMP
@@ -2142,26 +2142,30 @@
 
 //
 // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.)
+// Upscaled 128x64 Marlin UI
 //
 //#define FSMC_GRAPHICAL_TFT
 
 //
 // TFT LVGL UI
 //
-// Default MKS icons and fonts: https://git.io/JJvzK
-// Copy mks_pic and mks_font folders to the root of your SD
+// Using default MKS icons and fonts from: https://git.io/JJvzK
+// Just copy the 'assets' folder from the build directory to the
+// root of your SD card, together with the compiled firmware.
 //
-//#define TFT_LVGL_UI
+//#define TFT_LVGL_UI_FSMC  // Robin nano v1.2 uses FSMC
+//#define TFT_LVGL_UI_SPI   // Robin nano v2.0 uses SPI
+
+//
+// Anycubic Mega TFT (AI3M)
+//
+//#define ANYCUBIC_TFT_MODEL
+//#define ANYCUBIC_TFT_DEBUG
 
 //=============================================================================
 //============================  Other Controllers  ============================
 //=============================================================================
 
-//
-// Robin nano v2.0 SPI touch screen
-//
-//#define SPI_GRAPHICAL_TFT
-
 //
 // Ender-3 v2 OEM display. A DWIN display with Rotary Encoder.
 //

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -375,6 +375,7 @@
 #if ENABLED(USE_CONTROLLER_FAN)
   //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   //#define CONTROLLER_FAN_USE_Z_ONLY    // With this option only the Z axis is considered
+  //#define CONTROLLER_FAN_IGNORE_Z      // Ignore Z stepper. Useful when stepper timeout is disabled.
   #define CONTROLLERFAN_SPEED_MIN      0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
   #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
   #define CONTROLLERFAN_SPEED_IDLE     0 // (0-255) Idle speed, used when motors are disabled
@@ -897,6 +898,9 @@
 //#define CALIBRATION_GCODE
 #if ENABLED(CALIBRATION_GCODE)
 
+  //#define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..."
+  //#define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved"
+
   #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
 
   #define CALIBRATION_FEEDRATE_SLOW             60    // mm/m

diff --git a/Marlin/Marlin.ino b/Marlin/Marlin.ino
@@ -37,7 +37,7 @@ Configuration
 
 Getting Help
 
-  - http://forums.reprap.org/list.php?415
+  - https://reprap.org/forum/list.php?415
     The Marlin Discussion Forum is a great place to get help from other Marlin
     users who may have experienced similar issues to your own.
 

diff --git a/Marlin/Version.h b/Marlin/Version.h
@@ -71,6 +71,6 @@
  * Set the vendor info the serial USB interface, if changable
  * Currently only supported by DUE platform
  */
-//#define  USB_DEVICE_VENDOR_ID           0x0000
-//#define  USB_DEVICE_PRODUCT_ID          0x0000
-//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL
+//#define USB_DEVICE_VENDOR_ID           0x0000
+//#define USB_DEVICE_PRODUCT_ID          0x0000
+//#define USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL
diff --git a/Marlin/src/HAL/AVR/eeprom.cpp b/Marlin/src/HAL/AVR/eeprom.cpp
@@ -55,7 +55,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     crc16(crc, &v, 1);
     pos++;
     value++;
-  };
+  }
   return false;
 }
 

diff --git a/Marlin/src/HAL/AVR/fastio.h b/Marlin/src/HAL/AVR/fastio.h
@@ -57,7 +57,7 @@
  *
  * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 #define _READ(IO)             TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)

diff --git a/Marlin/src/HAL/DUE/Tone.cpp b/Marlin/src/HAL/DUE/Tone.cpp
@@ -24,7 +24,7 @@
 
 /**
  * Description: Tone function for Arduino Due and compatible (SAM3X8E)
- * Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
+ * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
  */
 
 #ifdef ARDUINO_ARCH_SAM

diff --git a/Marlin/src/HAL/DUE/eeprom_flash.cpp b/Marlin/src/HAL/DUE/eeprom_flash.cpp
@@ -993,7 +993,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     crc16(crc, &v, 1);
     pos++;
     value++;
-  };
+  }
   return false;
 }
 

diff --git a/Marlin/src/HAL/DUE/eeprom_wired.cpp b/Marlin/src/HAL/DUE/eeprom_wired.cpp
@@ -58,7 +58,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     crc16(crc, &v, 1);
     pos++;
     value++;
-  };
+  }
   return false;
 }
 

diff --git a/Marlin/src/HAL/DUE/fastio.h b/Marlin/src/HAL/DUE/fastio.h
@@ -58,7 +58,7 @@
  *
  * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 // Read a pin

diff --git a/Marlin/src/HAL/DUE/usb/arduino_due_x.h b/Marlin/src/HAL/DUE/usb/arduino_due_x.h
@@ -43,7 +43,7 @@
 #pragma once
 
 /**
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 /**

diff --git a/Marlin/src/HAL/DUE/usb/compiler.h b/Marlin/src/HAL/DUE/usb/compiler.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef UTILS_COMPILER_H

diff --git a/Marlin/src/HAL/DUE/usb/conf_access.h b/Marlin/src/HAL/DUE/usb/conf_access.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_ACCESS_H_

diff --git a/Marlin/src/HAL/DUE/usb/conf_clock.h b/Marlin/src/HAL/DUE/usb/conf_clock.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CONF_CLOCK_H_INCLUDED

diff --git a/Marlin/src/HAL/DUE/usb/conf_usb.h b/Marlin/src/HAL/DUE/usb/conf_usb.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_USB_H_

diff --git a/Marlin/src/HAL/DUE/usb/ctrl_access.c b/Marlin/src/HAL/DUE/usb/ctrl_access.c
@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM

diff --git a/Marlin/src/HAL/DUE/usb/ctrl_access.h b/Marlin/src/HAL/DUE/usb/ctrl_access.h
@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 

diff --git a/Marlin/src/HAL/DUE/usb/genclk.h b/Marlin/src/HAL/DUE/usb/genclk.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_GENCLK_H_INCLUDED

diff --git a/Marlin/src/HAL/DUE/usb/mrepeat.h b/Marlin/src/HAL/DUE/usb/mrepeat.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _MREPEAT_H_

diff --git a/Marlin/src/HAL/DUE/usb/osc.h b/Marlin/src/HAL/DUE/usb/osc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_OSC_H_INCLUDED

diff --git a/Marlin/src/HAL/DUE/usb/pll.h b/Marlin/src/HAL/DUE/usb/pll.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_PLL_H_INCLUDED

diff --git a/Marlin/src/HAL/DUE/usb/preprocessor.h b/Marlin/src/HAL/DUE/usb/preprocessor.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _PREPROCESSOR_H_

diff --git a/Marlin/src/HAL/DUE/usb/sbc_protocol.h b/Marlin/src/HAL/DUE/usb/sbc_protocol.h
@@ -52,7 +52,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 #ifndef _SBC_PROTOCOL_H_
 #define _SBC_PROTOCOL_H_

diff --git a/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h b/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h
@@ -42,7 +42,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 

diff --git a/Marlin/src/HAL/DUE/usb/spc_protocol.h b/Marlin/src/HAL/DUE/usb/spc_protocol.h
@@ -45,7 +45,7 @@
  */
 
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 #ifndef _SPC_PROTOCOL_H_
 #define _SPC_PROTOCOL_H_

diff --git a/Marlin/src/HAL/DUE/usb/stringz.h b/Marlin/src/HAL/DUE/usb/stringz.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _STRINGZ_H_

diff --git a/Marlin/src/HAL/DUE/usb/sysclk.c b/Marlin/src/HAL/DUE/usb/sysclk.c
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM

diff --git a/Marlin/src/HAL/DUE/usb/sysclk.h b/Marlin/src/HAL/DUE/usb/sysclk.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_SYSCLK_H_INCLUDED

diff --git a/Marlin/src/HAL/DUE/usb/tpaste.h b/Marlin/src/HAL/DUE/usb/tpaste.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _TPASTE_H_

diff --git a/Marlin/src/HAL/DUE/usb/udc.c b/Marlin/src/HAL/DUE/usb/udc.c
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM

diff --git a/Marlin/src/HAL/DUE/usb/udc.h b/Marlin/src/HAL/DUE/usb/udc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _UDC_H_

diff --git a/Marlin/src/HAL/DUE/usb/udc_desc.h b/Marlin/src/HAL/DUE/usb/udc_desc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _UDC_DESC_H_
-Original file line number
+Diff line change
@@ Expand Up @@
         crc16(crc, &v, 1);
         pos++;
         value++;
-      };
+      }
       return false;
     }
@@ Expand Down @@