test #4499
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# This Source Code Form is subject to the terms of the Mozilla Public | |
# License, v. 2.0. If a copy of the MPL was not distributed with this | |
# file, You can obtain one at http://mozilla.org/MPL/2.0/. | |
# | |
# Copyright (c) 2011-2021 ETH Zurich. | |
name: test | |
on: | |
push: # run this workflow on every push | |
pull_request: # run this workflow on every pull_request | |
jobs: | |
# there is a single job to avoid copying the built docker image from one job to the other | |
build-test-deploy-container: | |
runs-on: ubuntu-latest | |
env: | |
IMAGE_ID: ghcr.io/${{ github.repository_owner }}/gobra | |
# image labels are new-line separated key value pairs (according to https://specs.opencontainers.org/image-spec/annotations/): | |
IMAGE_LABELS: | | |
org.opencontainers.image.authors=Viper Project <https://viper.ethz.ch> | |
org.opencontainers.image.url=https://github.com/viperproject/gobra/pkgs/container/gobra | |
org.opencontainers.image.source=${{ github.server_url }}/${{ github.repository }} | |
org.opencontainers.image.revision=${{ github.sha }} | |
org.opencontainers.image.licenses=MPL-2.0 | |
org.opencontainers.image.description=Gobra image for revision ${{ github.sha }} built by workflow run ${{ github.run_id }} | |
CONCLUSION_SUCCESS: "success" | |
CONCLUSION_FAILURE: "failure" | |
# Output levels according to severity. | |
# They identify the kinds of annotations to be printed by Github. | |
NOTICE_LEVEL: "info" | |
WARNING_LEVEL: "warning" | |
FAILURE_LEVEL: "error" | |
steps: | |
- name: Checkout Gobra | |
uses: actions/checkout@v4 | |
with: | |
submodules: 'recursive' | |
- name: Check that silicon & carbon reference same silver commit | |
run: | | |
SILICON_SILVER_REF=$(git -C viperserver/silicon/silver rev-parse HEAD) && \ | |
CARBON_SILVER_REF=$(git -C viperserver/carbon/silver rev-parse HEAD) && \ | |
if [ "$SILICON_SILVER_REF" != "$CARBON_SILVER_REF" ]; then echo "Silicon and Carbon reference different Silver commits ($SILICON_SILVER_REF and $CARBON_SILVER_REF)" && exit 1 ; fi | |
# used to enable Docker caching (see https://github.com/docker/build-push-action) | |
- name: Set up Docker Buildx | |
uses: docker/setup-buildx-action@v3 | |
- name: Create image creation label | |
run: | | |
CREATED_LABEL="org.opencontainers.image.created=$(date --rfc-3339=seconds)" | |
echo "CREATED_LABEL=$CREATED_LABEL" >> $GITHUB_ENV | |
- name: Create image metadata | |
id: image-metadata | |
uses: docker/metadata-action@v5 | |
with: | |
images: ${{ env.IMAGE_ID }} | |
labels: | | |
${{ env.IMAGE_LABELS }} | |
${{ env.CREATED_LABEL }} | |
tags: | | |
# the first 4 tags correspond to the default options | |
type=schedule | |
type=ref,event=branch | |
type=ref,event=tag | |
type=ref,event=pr | |
# use (short) commit hash as tag: | |
type=sha | |
# use latest tag for default branch and with highest priority (1000 is the highest default priority for the other types): | |
type=raw,value=latest,priority=1100,enable={{is_default_branch}} | |
- name: Get first tag | |
run: echo "IMAGE_TAG=$(echo "${{ steps.image-metadata.outputs.tags }}" | head -1)" >> $GITHUB_ENV | |
- name: Build image up to including stage 'build' | |
id: image-build | |
# note that the action's name is misleading: this step does NOT push | |
uses: docker/build-push-action@v5 | |
with: | |
context: . | |
load: true # make the built image available in docker (locally) | |
target: build # only build up to and including stage 'build' | |
file: workflow-container/Dockerfile | |
tags: ${{ steps.image-metadata.outputs.tags }} | |
labels: ${{ steps.image-metadata.outputs.labels }} | |
push: false | |
provenance: false # without this, GH displays 2 architecture (unknown/unknown) and omits labels | |
# use GitHub cache: | |
cache-from: type=gha, scope=${{ github.workflow }} | |
cache-to: type=gha, scope=${{ github.workflow }} | |
- name: Execute all tests | |
run: | | |
# create a directory to sync with the docker container and to store the created pidstats | |
mkdir -p $PWD/sync | |
docker run \ | |
--mount type=volume,dst=/build/gobra/sync,volume-driver=local,volume-opt=type=none,volume-opt=o=bind,volume-opt=device=$PWD/sync \ | |
${{ env.IMAGE_TAG }} \ | |
/bin/sh -c "$(cat .github/test-and-measure-ram.sh)" | |
- name: Get max RAM usage by Java and Z3 | |
if: ${{ always() }} | |
shell: bash | |
env: | |
JAVA_WARNING_THRESHOLD_GB: 4.5 | |
JAVA_FAILURE_THRESHOLD_GB: 5.5 | |
Z3_WARNING_THRESHOLD_GB: 0.5 | |
Z3_FAILURE_THRESHOLD_GB: 1 | |
# awk is used to perform the computations such that the computations are performed with floating point precision | |
# we transform bash variables into awk variables to not cause problems with bash's variable substitution | |
# after computing the memory usage (in KB) a few more computations are performed. At the very end, all (local) | |
# environment variables are exported to `$GITHUB_ENV` such that they will be available in the next step as well. | |
run: | | |
function getMaxMemOfProcessInKb { | |
# $1 is the regex used to filter lines by the 9th column | |
# - we use variable `max` to keep track of the maximum | |
# - `curCount` stores the sum of all processes with the given name for a particular timestamp | |
# - note that looking at the timestamp is only an approximation: pidstat might report different timestamps in the | |
# same "block" of outputs (i.e. the report every second) | |
# - `NR>=2` specifies that the file's first line (NR=1) is ignored | |
# - `$7` refers to the 7th column in the file which corresponds to the column storing RAM (in kb) | |
# - `java$` matches only lines that end in the string 'java' | |
# - variable `max` is printed after processing the entire file | |
local result=$(awk -v processName=$1 -v max=0 -v curCount=0 -v curTimestamp=0 'processName~$9 {if(NR>=2){if(curTimestamp==$1){curCount=curCount+$7}else{curTimestamp=$1; curCount=$7}}; if(curCount>max){max=curCount}}END{print max}' sync/pidstat.txt) | |
echo $result | |
} | |
function convertKbToGb { | |
# $1 is the value [KB] that should be converted | |
local result=$(awk -v value=$1 'BEGIN {print value / 1000 / 1000}') | |
echo $result | |
} | |
function getLevel { | |
# $1 is the value that should be comparing against the thresholds | |
# $2 is the threshold causing a warning | |
# $3 is the threshold causing an error | |
# writes ${{ env.NOTICE_LEVEL }}, ${{ env.WARNING_LEVEL}} or ${{ env.FAILURE_LEVEL }} to standard output | |
local result=$(awk -v value=$1 -v warnThres=$2 -v errThres=$3 'BEGIN { print (value>errThres) ? "${{ env.FAILURE_LEVEL }}" : (value>warnThres) ? "${{ env.WARNING_LEVEL }}" : "${{ env.NOTICE_LEVEL}}" }') | |
echo $result | |
} | |
MAX_JAVA_KB=$(getMaxMemOfProcessInKb 'java$') | |
MAX_Z3_KB=$(getMaxMemOfProcessInKb 'z3$') | |
MAX_JAVA_GB=$(convertKbToGb $MAX_JAVA_KB) | |
MAX_Z3_GB=$(convertKbToGb $MAX_Z3_KB) | |
JAVA_LEVEL=$(getLevel $MAX_JAVA_GB ${{ env.JAVA_WARNING_THRESHOLD_GB }} ${{ env.JAVA_FAILURE_THRESHOLD_GB }}) | |
Z3_LEVEL=$(getLevel $MAX_Z3_GB ${{ env.Z3_WARNING_THRESHOLD_GB }} ${{ env.Z3_FAILURE_THRESHOLD_GB }}) | |
if [[ "$JAVA_LEVEL" = "${{ env.FAILURE_LEVEL }}" || "$Z3_LEVEL" = "${{ env.FAILURE_LEVEL }}" ]] | |
then | |
CONCLUSION="${{ env.CONCLUSION_FAILURE }}" | |
else | |
CONCLUSION="${{ env.CONCLUSION_SUCCESS }}" | |
fi | |
echo "MAX_JAVA_GB=$MAX_JAVA_GB" >> $GITHUB_ENV | |
echo "MAX_Z3_GB=$MAX_Z3_GB" >> $GITHUB_ENV | |
echo "JAVA_LEVEL=$JAVA_LEVEL" >> $GITHUB_ENV | |
echo "Z3_LEVEL=$Z3_LEVEL" >> $GITHUB_ENV | |
echo "CONCLUSION=$CONCLUSION" >> $GITHUB_ENV | |
- name: Create annotations | |
if: ${{ always() }} | |
# Outputs the memory consumption of JAVA and Z3. The message format is described in | |
# https://docs.github.com/en/actions/reference/workflow-commands-for-github-actions . | |
run: | | |
JAVA_MESSAGE="Java used up to ${{ env.MAX_JAVA_GB }}GB of RAM" | |
if [ "${{ env.JAVA_LEVEL }}" = "${{ env.NOTICE_LEVEL }}" ] | |
then | |
echo "$JAVA_MESSAGE" | |
else | |
echo "::${{ env.JAVA_LEVEL }} file=.github/workflows/test.yml,line=1::$JAVA_MESSAGE" | |
fi | |
Z3_MESSAGE="Z3 used up to ${{ env.MAX_Z3_GB }}GB of RAM" | |
if [ "${{ env.Z3_LEVEL }}" = "${{ env.NOTICE_LEVEL }}" ] | |
then | |
echo "$Z3_MESSAGE" | |
else | |
echo "::${{ env.Z3_LEVEL }} file=.github/workflows/test.yml,line=1::$Z3_MESSAGE" | |
fi | |
if [ $CONCLUSION = "${{ env.CONCLUSION_FAILURE }}" ] | |
then | |
# the whole step fails when this comparison fails | |
exit 1 | |
fi | |
- name: Upload RAM usage | |
if: ${{ always() }} | |
uses: actions/upload-artifact@v4 | |
with: | |
name: pidstat.txt | |
path: sync/pidstat.txt | |
- name: Build entire image | |
uses: docker/build-push-action@v5 | |
with: | |
context: . | |
load: true # make the built image available in docker (locally) | |
file: workflow-container/Dockerfile | |
tags: ${{ steps.image-metadata.outputs.tags }} | |
labels: ${{ steps.image-metadata.outputs.labels }} | |
push: false | |
provenance: false # without this, GH displays 2 architecture (unknown/unknown) and omits labels | |
# use GitHub cache: | |
cache-from: type=gha, scope=${{ github.workflow }} | |
cache-to: type=gha, scope=${{ github.workflow }} | |
- name: Test final container by verifying a file | |
run: | | |
docker run \ | |
${{ env.IMAGE_TAG }} \ | |
-i tutorial-examples/basicAnnotations.gobra | |
- name: Decide whether image should be deployed or not | |
run: | | |
# note that these GitHub expressions return the value '1' for 'true' (as opposed to bash) | |
IS_GOBRA_REPO=${{ github.repository == 'viperproject/gobra' }} | |
IS_MASTER=${{ github.ref == 'refs/heads/master' }} | |
IS_VERIFIED_SCION=${{ github.ref == 'refs/heads/verified-scion-preview-without-selective' }} | |
IS_PROPER_TAG=${{ startsWith(github.ref, 'refs/tags/v') }} | |
# we use `${{ true }}` to be able to compare against GitHub's truth value: | |
if [[ "$IS_GOBRA_REPO" == ${{ true }} && ("$IS_MASTER" == ${{ true }} || "$IS_VERIFIED_SCION" == ${{ true }} || "$IS_PROPER_TAG" == ${{ true }}) ]] | |
then | |
SHOULD_DEPLOY='true' | |
else | |
SHOULD_DEPLOY='false' | |
fi | |
echo "SHOULD_DEPLOY=$SHOULD_DEPLOY" >> $GITHUB_ENV | |
- name: Login to Github Packages | |
if: env.SHOULD_DEPLOY == 'true' | |
uses: docker/login-action@v3 | |
with: | |
registry: ghcr.io | |
username: ${{ github.actor }} | |
password: ${{ secrets.GITHUB_TOKEN }} | |
- name: Push entire image | |
if: env.SHOULD_DEPLOY == 'true' | |
uses: docker/build-push-action@v5 | |
with: | |
context: . | |
file: workflow-container/Dockerfile | |
tags: ${{ steps.image-metadata.outputs.tags }} | |
labels: ${{ steps.image-metadata.outputs.labels }} | |
push: true | |
provenance: false # without this, GH displays 2 architecture (unknown/unknown) and omits labels | |
# use GitHub cache: | |
cache-from: type=gha, scope=${{ github.workflow }} | |
cache-to: type=gha, scope=${{ github.workflow }} |