Welcome to the Fluxor module, part of the vFlux-Stats-Kit.
The Fluxor module gathers performance stats from VMware vSphere and writes them
to a local or remote InfluxDB time series database. Optionally, output to file
using the OutputPath parameter, or return raw vSphere API objects with the
PassThru parameter.
The Fluxor module gathers very basic stats and is intended for you to extend. However, if you just want a ready-made kit, check out the following items.
The free sexigraf appliance (deployed as OVA or from ISO):
You can feed InfluxDB with Telegraf, an open source package from Influxdata. You can use the amazing custom scripts added by influxdata community member @prydin. It does more/better than Fluxor and uses pure api and proper integers when writing line protocol. Check it out at:
This set of dashboards uses the new Telegraf plugin and some excellent custom charts:
This one is a community dashboard using the old version of the vFlux-Stats-Kit. Nothing has changed with our default collection naming (i.e. cpu.usage.average) so these should work fine:
https://github.com/jorgedlcruz/vmware-grafana
Please open an issue for any creative ideas or feedback (or to share a dashboard or post!). Of course, if you find an issue or an OS that we cannot handle yet, please do let us know. There is no need to follow any official format.
Twitter DM is open. Reach us at:
All required components can be run on a single client, or across multiple clients
of any operating system. Specifically, we support Windows, Linux and macOS.
Full support for Core Editions of PowerShell and also
PowerShell 3.0 through PowerShell 5.1.
VMware PowerCLI 6.5.4 or greater (VMware PowerCLI 10.x or later preferred)
Fluxor started out as individual .ps1 scripts and is now a PowerShell module. Initially, this was intended to run on Windows only, but we now support everything.
Over time, the techniques we use have evolved with great thanks to the community members.
For example, we started out using curl.exe on Windows only. Now we use Invoke-RestMethod
and Invoke-WebRequest (since v0.4) and can run on anything (as of v1.0.0.1). Advanced
topics such as session handling with the webcmdlets were handled by our users. These and
many more advancements are reflected in the latest release.
Though we support all operating systems that PowerShell and PowerCLI run on,
credentials on disk are not available for Core Editions of PowerShell. So this
means all Linux and macOS, and any Windows that are running Core Editions of PowerShell
cannot save or consume PSCredential from disk.
Core Editions of PowerShell cannot handle secure string, so we leave the Parameters of
User and Password as [string] compared to secure string. If you will run on Windows with
a PowerShell 3.0 through PowerShell 5.1, you can use use secure string without issue (if so
inclined to edit).
There is no impact to PSCredential handling in memory (i.e. $creds = Get-Credential) for Core
Editions of PowerShell. This works as expected with all editions of PowerShell.
We support, but do not require, the use of plain text passwords. Never use an important password in plain text. Always create a read-only account when in doubt. Also, check with your InfoSec team to ensure that you find the best option (of the many we offer) for credential handling with the Fluxor module.
To use passthrough authentication leave the Strict parameter set to $true (the default).
$iops = Get-FluxIOPS -Server $vc
Write-FluxIOPS -Server $vc -InputObject $iops
Set Strict to $false to use the plain text value in the script. If using the plain text option (-Strict:$false) remember to use it on the Get and Write functions of the Fluxor module.
Get-FluxCompute -Server $vc -Strict:$false | Write-FluxCompute -Server $influx -Strict:$false
https://github.com/vmkdaily/vFlux-Stats-Kit
Navigate to Downloads, and right-click the .zip file and select scan
Right-click the .zip file and select Properties, and then unblock, if available.
Get familiar with the layout of the module. We use a very common technique of public and private folders
within the module. Any cmdlets in the private folder are used internally by the module. The cmdlets that
you will interact with are located in the public folder. Nothing is truly public, this is just module talk.
Locate the folder called Fluxor. This contains all of the components of the PowerShell module.
Determine which user will be running the stats collections and copy the Fluxor folder to the
$HOME directory (or any other location you prefer for your PowerShell modules).
There are preferences sections in the Begin block of each script. Customize as desired and then take a backup
of your Fluxor folder (i.e. send to a zip). There is no need to customize values if you use runtime parameters
such as Server, Credential, etc.
We support any flavor, so launch-away (PowerShell.exe, pwsh, pwsh-preview, etc.).
Point to the Fluxor folder to import the module with Import-Module.
PS C:\> Import-Module C:\scripts\Fluxor -Verbose
VERBOSE: Loading module from path 'C:\scripts\Fluxor\Fluxor.psd1'.
VERBOSE: Loading module from path 'C:\scripts\Fluxor\Fluxor.psm1'.
VERBOSE: Importing function 'Get-FluxCompute'.
VERBOSE: Importing function 'Get-FluxCrontab'.
VERBOSE: Importing function 'Get-FluxIOPS'.
VERBOSE: Importing function 'Get-FluxSummary'.
VERBOSE: Importing function 'Invoke-FluxCLI'.
VERBOSE: Importing function 'New-FluxCredential'.
VERBOSE: Importing function 'Write-FluxCompute'.
VERBOSE: Importing function 'Write-FluxIOPS'.
VERBOSE: Importing function 'Write-FluxSummary'.
PS C:\>
Use Get-Command (or alias gcm) to see the available cmdlets.
PS /home/mike> gcm -Module Fluxor | ft -AutoSize
CommandType Name Version Source
----------- ---- ------- ------
Function Get-FluxCompute 1.0.0.9 Fluxor
Function Get-FluxCrontab 1.0.0.9 Fluxor
Function Get-FluxIOPS 1.0.0.9 Fluxor
Function Get-FluxSummary 1.0.0.9 Fluxor
Function Invoke-FluxCLI 1.0.0.9 Fluxor
Function New-FluxCredential 1.0.0.9 Fluxor
Function Write-FluxCompute 1.0.0.9 Fluxor
Function Write-FluxIOPS 1.0.0.9 Fluxor
Function Write-FluxSummary 1.0.0.9 Fluxor
Use the cmdlet help system to learn about parameters and usage.
help Get-FluxIOPS
help Get-FluxIOPS -Examples
help Get-FluxIOPS -Parameter -CredentialPath
Let's start simple and assume you have PowerCLI up and running and you are already connected to vCenter.
$stats = Get-FluxCompute
By default, we return a PowerShell object. So we can dip into the array with $stats[0], etc.
Here we will just select the first object.
$stats | Select-Object -First 1
For this step, we assume InfluxDB is on localhost and you followed our examples thus far.
This means you have at least one or more InfluxDB databases created (i.e. compute, iops, summary).
Write-FluxCompute -InputObject $stats
Tip: If you want to pipe you can also
Get-FluxCompute | Write-FluxCompute
With InfluxDB, each data point we send has a measurement name. An example would be something
like cpu.usage.average. We can check our success by reviewing the database for these new
measurements. Next, we show a couple of ways to do that.
We can use the native InfluxDB commandline tool known as influx to interact with the local
InfluxDB database. Just type influx from your shell.
We placed a wrapper around the native influx command just for convenience and optional use.
If you like doing stuff from PowerShell and keeping it simple, then this is for you.
First, let's just show the version and exit:
PS /home/mike> Invoke-FluxCLI -Version
PS /home/mike> InfluxDB shell version: 1.6.3
If you are still with me, great! Now let's look at some InfluxDB
Measurements!
We are still using Invoke-FluxCLI, but now we go into more advanced usage
with the ScriptText and Database parameters. Here we ask InfluxDB to report
back with measurements it has. This means we were successful in performing at
least one write.
PS /home/fluxor> Invoke-FluxCLI -ScriptText 'SHOW MEASUREMENTS' -Database 'compute'
name: measurements
name
----
cpu.ready.summation
cpu.usage.average
cpu.usagemhz.average
mem.usage.average
net.usage.average
Great, we are getting all of the measurements that come with compute metrics.
Now let's move on to IOPS.
Every cmdlet works the same and once you get the hang of one, the others should be easy.
We already worked with Get-FluxCompute. Next we use Get-FluxIOPS to collect disk
performance results.
Thus far, we assumed you were already logged into vCenter Server. Now let's use a simple
PSCredential login (one of many techniques available with Fluxor).
$vc = 'vcsa01.lab.local'
$credsVC = Get-Credential administrator@vsphere.local
$iops = Get-FluxIOPS -Server $vc -Credential $credsVC
Write-FluxIOPS -InputObject $iops
Next, we can check for results in Grafana by creating a dashboard, or
using the Invoke-FluxCLI again. Let's use the CLI!
PS /home/mike> Invoke-FluxCLI -Database iops -ScriptText 'SHOW MEASUREMENTS'
PS /home/mike> name: measurements
name
----
disk.maxtotallatency.latest
disk.numberread.summation
disk.numberwrite.summation
New in the latest module is a summary feature. Formerly, we had only compute and iops.
Now we add a new database called summary to take in basic information such as overallstatus
(i.e. green,red, etc.) and things you would expect such as numcpu and memorygb. We can easily
add a ton of stuff here (think anything you can dot into from Get-VM). For now we keep it simple.
In this example, we have everything except the summary database:
PS /home/mike> Invoke-FluxCLI -ScriptText 'SHOW DATABASES'
name: databases
name
----
_internal
iops
compute
Let's add the summary database to InfluxDB. We will again use Invoke-FluxCLI, which is just a wrapper for the influx binary.
The nature of influx commands is to respond only if something failed. In the below, no response is good.
PS /home/mike> Invoke-FluxCLI -ScriptText 'CREATE DATABASE summary'
PS /home/mike>
Influx commands only return a response on failure.
Here we use the native SHOW DATABASES command via the ScriptText parameter of Invoke-FluxCLI.
PS /home/mike> Invoke-FluxCLI -ScriptText 'SHOW DATABASES'
PS /home/mike> name: databases
name
----
_internal
iops
compute
summary
Let's perform a SHOW MEASUREMENTS on the summary database. If a database has not been populated, then we see no results when we query for measurements.
PS /home/mike> Invoke-FluxCLI -Database summary -ScriptText 'SHOW MEASUREMENTS'
PS /home/mike>
Now let's populate the summary database with some stats. For this we will use the Get-FluxSummary to collect summary data points, and then we use Write-FluxSummary to write the results to InfluxDB. The default value for the ReportType switch is VM though we populate anyway here for visualization (soon we will do VMHost too).
Get-FluxSummary -ReportType 'VM' | Write-FluxSummary
Example assumes we are connected to vCenter already and InfluxDB is localhost. Use additional parameters as needed.
Here we will use the ReportType of VMHost when collecting summary data points.
Get-FluxSummary -Server $vc -ReportType VMHost | Write-FluxSummary
Once data points have been written, you should see the following two measurements for summary:
PS /home/mike> Invoke-FluxCLI -Database summary -ScriptText 'SHOW MEASUREMENTS'
name: measurements
name
----
flux.summary.vm
flux.summary.vmhost
We support output of the results to text file when using the OutputPath parameter.
Writing to text files is not the cmdlet default, but we make it available. Users could
take these files and then control the push to InfluxDB themselves. The files are crafted
in line protocol, which means they are really just for InfluxDB.
We always output into pure InfluxDB-style line protocol (unless using the PassThru switch).
The Fluxor cmdlets that collect data points (i.e. Get-FluxCompute, Get-FluxIOPS and Get-FluxSummary)
always return a PowerShell object (a simple array of line protocol, including the required line breaks).
If you want pure VMware vSphere stat objects instead, use PassThru.
Use PassThru mode to access the raw Get-Stat and Get-VsanStat and then exit. Fluxor will do nothing further with those, except return the array of stat objects, if any. This can be convenient for comparison against what you see in Grafana for example.
Here, we are already connected to vCenter and just grab some stats in PassThru mode.
$stats = Get-FluxCompute -PassThru
At first glance you might not realize the stat has the virtual machine information too. You can dig into the object as you would expect.
$stats | ?{$_.Entity -match '^ExactlyThisVmName001'}
$stats | ?{$_.Entity -match '^nameStartsLikeThis'}
$stats | ?{$_.Entity -like "*kindalikethis*"
Let's keep looking at this one VM to keep it simple. Let's also dig into just one metric (or measurement as we call it for InfluxDB).
Get-FluxCompute -PassThru | Where-Object {$_.Entity -match '^TESTVM001' -and $_.MetricID -eq 'cpu.usage.average'}
One last example with PassThru. Remember, this example returns raw vSphere stats, not the default output we normally give you (line protocol).
Here we issue Get-FluxCompute -PassThru and limit the results to only cpu.usage.average.
$vm = 'myvm001'
1..10 | ForEach-Object {Get-Date -Format o; Get-FluxCompute -PassThru | Where-Object { $_.Entity -match $vm -and $_.MetricID -eq 'cpu.usage.average'}; Start-Sleep 20;""}
Let's summarize by showing all of the main stats cmdlets being used in verbose mode.
##########################
## Virtual Machine Stats
##########################
PS C:\> $stats = Get-FluxCompute -Verbose
VERBOSE: Starting Get-FluxCompute at 2018-09-29T20:07:15.0508946-05:00
VERBOSE: Using connection to vcva01.lab.local
VERBOSE: Beginning stat collection on vcva01.lab.local
VERBOSE: 9/29/2018 8:07:15 PM Get-VM Started execution
VERBOSE: 9/29/2018 8:07:15 PM Get-VM Finished execution
VERBOSE: 9/29/2018 8:07:15 PM Get-Stat Started execution
VERBOSE: 9/29/2018 8:07:29 PM Get-Stat Finished execution
VERBOSE: Running in object mode; Data points collected successfully!
VERBOSE: Elapsed Processing Time: 29.5228279 seconds
VERBOSE: Processing Time Per VM: 0.192959659477124 seconds
VERBOSE: Ending Get-FluxCompute at 2018-09-29T20:07:44.6205228-05:00
PS C:\>
PS C:\> $stats[0]
cpu.usage.average,host=myvm002,interval=20,type=VM,unit=%,vc=vcva01.lab.local value=4.25 1538269649940828928
PS C:\> $iops = Get-FluxIOPS -Verbose
VERBOSE: Starting Get-FluxIOPS at 2018-09-29T20:14:20.0161095-05:00
VERBOSE: Using connection to vcva01.lab.local
VERBOSE: Beginning stat collection on vcva01.lab.local
VERBOSE: 9/29/2018 8:14:20 PM Get-Datastore Started execution
VERBOSE: 9/29/2018 8:14:20 PM Get-Datastore Finished execution
VERBOSE: 9/29/2018 8:14:20 PM Get-VM Started execution
VERBOSE: 9/29/2018 8:14:20 PM Get-VM Finished execution
VERBOSE: 9/29/2018 8:14:21 PM Get-VM Started execution
VERBOSE: 9/29/2018 8:14:21 PM Get-VM Finished execution
VERBOSE:
VERBOSE: //vcva01.lab.local Overview
VERBOSE: VMFS Datastores: 50
VERBOSE: NFS Datastores: 2
VERBOSE: vSAN Datastore: False
VERBOSE: Block VMs: 153
VERBOSE: NFS VMs: 0
VERBOSE: vSAN VMs: 0
VERBOSE: 9/29/2018 8:14:21 PM Get-Stat Started execution
VERBOSE: 9/29/2018 8:14:32 PM Get-Stat Finished execution
VERBOSE: Running in object mode; Data points collected successfully!
VERBOSE: Ending Get-FluxIOPS at 2018-09-29T20:14:34.5576511-05:00
PS C:\>
PS C:\> $iops[0]
disk.numberwrite.summation,disktype=Block,host=myvm002,instance=naa.6019cb5180a3b07b3eb5b5f4f3045017,interval=20,type=VM,unit=number,vc=vcva01.lab.local value=3 1538270072857240320
PS C:\> $summary = Get-FluxSummary -Verbose
VERBOSE: Starting Get-FluxSummary at 2018-09-29T20:18:39.5359640-05:00
VERBOSE: Using connection to vcva01.lab.local
VERBOSE: Beginning summary collection on vcva01.lab.local
VERBOSE: 9/29/2018 8:18:39 PM Get-VM Started execution
VERBOSE: 9/29/2018 8:18:39 PM Get-VM Finished execution
VERBOSE: Running in object mode; Data points collected successfully!
VERBOSE: Elapsed Processing Time: 3.9156251 seconds
VERBOSE: Processing Time Per VM: 0.0255923209150327 seconds
VERBOSE: Ending Get-FluxSummary at 2018-09-29T20:18:43.4515891-05:00
PS C:\>
PS C:\> $summary[0]
flux.summary.vm,host=myvm002,memorygb=2,numcpu=2,type=VM,vc=vcva01.lab.local value="green" 1538270320191168256
##########################
## VMHost Stats
##########################
PS C:\> $EsxStats = Get-FluxCompute -ReportType VMHost -Verbose
VERBOSE: Starting Get-FluxCompute at 2018-09-29T20:23:06.9010263-05:00
VERBOSE: Using connection to vcva01.lab.local
VERBOSE: Beginning stat collection on vcva01.lab.local
VERBOSE: 9/29/2018 8:23:06 PM Get-VMHost Started execution
VERBOSE: 9/29/2018 8:23:07 PM Get-VMHost Finished execution
VERBOSE: 9/29/2018 8:23:07 PM Get-Stat Started execution
VERBOSE: 9/29/2018 8:23:15 PM Get-Stat Finished execution
VERBOSE: Running in object mode; Data points collected successfully!
VERBOSE: Ending Get-FluxCompute at 2018-09-29T20:23:16.6988892-05:00
PS C:\>
PS C:\> $EsxStats[0]
cpu.usage.average,host=esx01.lab.local,instance=20,interval=20,type=VMHost,unit=%,vc=vcva01.lab.local value=21.32 1538270595497681664
PS C:\> $EsxSummary = Get-FluxSummary -ReportType VMHost -Verbose
VERBOSE: Starting Get-FluxSummary at 2018-09-29T20:35:33.2989579-05:00
VERBOSE: Using connection to vcva01.lab.local
VERBOSE: Beginning summary collection on vcva01.lab.local
VERBOSE: 9/29/2018 8:35:33 PM Get-VMHost Started execution
VERBOSE: 9/29/2018 8:35:34 PM Get-VMHost Finished execution
VERBOSE: Running in object mode; Data points collected successfully!
VERBOSE: Ending Get-FluxSummary at 2018-09-29T20:35:39.8041996-05:00
PS C:\>
PS C:\> $EsxSummary | Select-Object -First 3
flux.summary.vmhost,host=esx01.lab.local,memorygb=256,numcpu=16,type=VMHost,vc=vcva01.lab.local value="green" 1538271335186569984
flux.summary.vmhost,host=esx02.lab.local,memorygb=256,numcpu=16,type=VMHost,vc=vcva01.lab.local value="green" 1538271335467371776
flux.summary.vmhost,host=esx03.lab.local,memorygb=256,numcpu=16,type=VMHost,vc=vcva01.lab.local value="green" 1538271335794974208
###################
## Output to File
###################
Finally, we show the non-standard technique of writing to file. Then we show some of the results.
PS C:\> Get-FluxCompute -OutputPath $HOME -Verbose
VERBOSE: Starting Get-FluxCompute at 2018-09-29T21:09:17.3520291-05:00
VERBOSE: Using connection to vcva01.lab.local
VERBOSE: Beginning stat collection on vcva01.lab.local
VERBOSE: Creating output directory for stat collection at C:\Users\mike\fluxstat
VERBOSE: 9/29/2018 9:09:17 PM Get-VM Started execution
VERBOSE: 9/29/2018 9:09:17 PM Get-VM Finished execution
VERBOSE: 9/29/2018 9:09:17 PM Get-Stat Started execution
VERBOSE: 9/29/2018 9:09:33 PM Get-Stat Finished execution
VERBOSE: Write succeeded: C:\Users\mike\fluxstat\fluxstat-cca0fdb5-f1fc-437a-ac50-036173cddfea.txt
VERBOSE: Elapsed Processing Time: 32.4988554 seconds
VERBOSE: Processing Time Per VM: 0.212410819607843 seconds
VERBOSE: Ending Get-FluxCompute at 2018-09-29T21:09:49.8508845-05:00
C:\Users\mike\fluxstat\fluxstat-cca0fdb5-f1fc-437a-ac50-036173cddfea.txt
PS C:\>
PS C:\> cat $home\fluxstat\fluxstat-cca0fdb5-f1fc-437a-ac50-036173cddfea.txt | more
cpu.usage.average,host=myvm002,interval=20,type=VM,unit=%,vc=vcva01.lab.local value=4.12 1538273373796381696
cpu.ready.summation,host=myvm002,instance=0,interval=20,type=VM,unit=millisecond,vc=vcva01.lab.local value=0.03 1538273373889982208
net.usage.average,host=myvm002,instance=vmnic3,interval=20,type=VM,unit=KBps,vc=vcva01.lab.local value=1764 1538273376011595776
-end-