try EXPERIMENTAL_SCURVE in LinAdv with CLASSIC_JERK instead of Juncti…

…on Deviation MarlinFirmware#17342
vogler · Oct 22, 2021 · dac5e95 · dac5e95
1 parent 8ddd873
commit dac5e95
Show file tree

Hide file tree

Showing 2 changed files with 4 additions and 4 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -975,7 +975,7 @@
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-//#define CLASSIC_JERK
+#define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
  #define DEFAULT_XJERK 8.0
  #define DEFAULT_YJERK 8.0
@@ -992,7 +992,7 @@
  #endif
 #endif
 
-#define DEFAULT_EJERK  5.0 // May be used by Linear Advance
+#define DEFAULT_EJERK 10.0 // May be used by Linear Advance
 
 /**
  * Junction Deviation Factor
@@ -1015,7 +1015,7 @@
  *
  * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  */
-//#define S_CURVE_ACCELERATION
+#define S_CURVE_ACCELERATION
 
 //===========================================================================
 //============================= Z Probe Options =============================

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -1914,7 +1914,7 @@
  //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
  #define LIN_ADVANCE_K 0.07 // Unit: mm compression per 1mm/s extruder speed
  //#define LA_DEBUG // If enabled, this will generate debug information output over USB.
- //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
+ #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
 #endif
 
 // @section leveling