Merge pull request dashpay#5437 from UdjinM6/release_notes_19.2.0

backport: final v19.2 backports, v19.2.0 release notes and version bump

configure.ac

@@ -2,8 +2,8 @@ AC_PREREQ([2.69])
 define(_CLIENT_VERSION_MAJOR, 19)
 define(_CLIENT_VERSION_MINOR, 2)
 define(_CLIENT_VERSION_BUILD, 0)
-define(_CLIENT_VERSION_RC, 1)
-define(_CLIENT_VERSION_IS_RELEASE, false)
+define(_CLIENT_VERSION_RC, 0)
+define(_CLIENT_VERSION_IS_RELEASE, true)
 define(_COPYRIGHT_YEAR, 2023)
 define(_COPYRIGHT_HOLDERS,[The %s developers])
 define(_COPYRIGHT_HOLDERS_SUBSTITUTION,[[Dash Core]])

doc/man/dash-cli.1

@@ -1,7 +1,7 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.2.
-.TH DASH-CLI "1" "April 2023" "dash-cli v19.0.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH DASH-CLI "1" "June 2023" "dash-cli v19.2.0" "User Commands"
 .SH NAME
-dash-cli \- manual page for dash-cli v19.0.0
+dash-cli \- manual page for dash-cli v19.2.0
 .SH SYNOPSIS
 .B dash-cli
 [\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]  \fI\,Send command to Dash Core\/\fR
@@ -15,7 +15,7 @@ dash-cli \- manual page for dash-cli v19.0.0
 .B dash-cli
 [\fI\,options\/\fR] \fI\,help <command>      Get help for a command\/\fR
 .SH DESCRIPTION
-Dash Core RPC client version v19.0.0
+Dash Core RPC client version v19.2.0
 .SH OPTIONS
 .HP
 \-?

doc/man/dash-qt.1

@@ -1,12 +1,12 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.2.
-.TH DASH-QT "1" "April 2023" "dash-qt v19.0.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH DASH-QT "1" "June 2023" "dash-qt v19.2.0" "User Commands"
 .SH NAME
-dash-qt \- manual page for dash-qt v19.0.0
+dash-qt \- manual page for dash-qt v19.2.0
 .SH SYNOPSIS
 .B dash-qt
 [\fI\,command-line options\/\fR]
 .SH DESCRIPTION
-Dash Core version v19.0.0
+Dash Core version v19.2.0
 .SH OPTIONS
 .HP
 \-?
@@ -23,9 +23,9 @@ message)
 If this block is in the chain assume that it and its ancestors are valid
 and potentially skip their script verification (0 to verify all,
 default:
-00000000000000261bdbe99c01fcba992e577efa6cc41aae564b8ca9f112b2a3,
+00000000000000075300e852d5bf5380f905b2768241f8b442498442084807a7,
 testnet:
-0000005c35514190ef3c38d322f69412553dc7e1107ed5f92adc2935b90acc51)
+0000014d3b875540ff75517b7fbb1714e25d50ce92f65d7086cfce357928bb02)
 .HP
 \fB\-blockfilterindex=\fR<type>
 .IP

doc/man/dash-tx.1

@@ -1,15 +1,15 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.2.
-.TH DASH-TX "1" "April 2023" "dash-tx v19.0.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH DASH-TX "1" "June 2023" "dash-tx v19.2.0" "User Commands"
 .SH NAME
-dash-tx \- manual page for dash-tx v19.0.0
+dash-tx \- manual page for dash-tx v19.2.0
 .SH SYNOPSIS
 .B dash-tx
 [\fI\,options\/\fR] \fI\,<hex-tx> \/\fR[\fI\,commands\/\fR]  \fI\,Update hex-encoded dash transaction\/\fR
 .br
 .B dash-tx
 [\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]   \fI\,Create hex-encoded dash transaction\/\fR
 .SH DESCRIPTION
-Dash Core dash\-tx utility version v19.0.0
+Dash Core dash\-tx utility version v19.2.0
 .SH OPTIONS
 .HP
 \-?

doc/man/dash-wallet.1

@@ -1,9 +1,9 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.2.
-.TH DASH-WALLET "1" "April 2023" "dash-wallet v19.0.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH DASH-WALLET "1" "June 2023" "dash-wallet v19.2.0" "User Commands"
 .SH NAME
-dash-wallet \- manual page for dash-wallet v19.0.0
+dash-wallet \- manual page for dash-wallet v19.2.0
 .SH DESCRIPTION
-Dash Core dash\-wallet version v19.0.0
+Dash Core dash\-wallet version v19.2.0
 .PP
 dash\-wallet is an offline tool for creating and interacting with Dash Core wallet files.
 By default dash\-wallet will act on wallets in the default mainnet wallet directory in the datadir.

doc/man/dashd.1

@@ -1,12 +1,12 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.2.
-.TH DASHD "1" "April 2023" "dashd v19.0.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
+.TH DASHD "1" "June 2023" "dashd v19.2.0" "User Commands"
 .SH NAME
-dashd \- manual page for dashd v19.0.0
+dashd \- manual page for dashd v19.2.0
 .SH SYNOPSIS
 .B dashd
 [\fI\,options\/\fR]                     \fI\,Start Dash Core Daemon\/\fR
 .SH DESCRIPTION
-Dash Core Daemon version v19.0.0
+Dash Core Daemon version v19.2.0
 .SH OPTIONS
 .HP
 \-?
@@ -23,9 +23,9 @@ message)
 If this block is in the chain assume that it and its ancestors are valid
 and potentially skip their script verification (0 to verify all,
 default:
-00000000000000261bdbe99c01fcba992e577efa6cc41aae564b8ca9f112b2a3,
+00000000000000075300e852d5bf5380f905b2768241f8b442498442084807a7,
 testnet:
-0000005c35514190ef3c38d322f69412553dc7e1107ed5f92adc2935b90acc51)
+0000014d3b875540ff75517b7fbb1714e25d50ce92f65d7086cfce357928bb02)
 .HP
 \fB\-blockfilterindex=\fR<type>
 .IP

doc/release-notes.md

@@ -1,13 +1,14 @@
-# Dash Core version v19.1.0
+# Dash Core version v19.2.0
 
 Release is now available from:
 
   <https://www.dash.org/downloads/#wallets>
 
-This is a new minor version release, bringing various bugfixes and other improvements.
+This is a new minor version release, bringing various bugfixes and other
+improvements.
 
-This release is mandatory for all nodes. This release delays v19 hard fork activation and
-will effectively hard fork the network. v19.0.0 nodes must upgrade to continue syncing properly.
+This release is mandatory for all nodes. This release resolves issues around the
+v19 Hard Fork activation. All nodes must upgrade to continue syncing properly.
 
 Please report bugs using the issue tracker at GitHub:
 
@@ -26,46 +27,102 @@ using version < 0.13 you will have to reindex (start with -reindex-chainstate
 or -reindex) to make sure your wallet has all the new data synced. Upgrading
 from version 0.13 should not require any additional actions.
 
-When upgrading from a version prior to 18.0.1, the
-first startup of Dash Core will run a migration process which can take anywhere
-from a few minutes to thirty minutes to finish. After the migration, a
-downgrade to an older version is only possible with a reindex
-(or reindex-chainstate).
+At the first startup Dash Core will run a migration process which can take
+anywhere from a few minutes to thirty minutes to finish. After the migration,
+a downgrade to an older version is only possible with a reindex.
+
+Please note that seamless migration is only possible on nodes which did not
+reach the v19 fork block. Nodes that reached it can either rewind a couple
+of blocks back to a pre-v19 block using `invalidateblock` RPC while still
+running the old version or they can reindex instead.
 
 ## Downgrade warning
 
-### Downgrade to a version < v19.1.0
-Downgrading below v19.1.0 is not supported as v19.0.0 will attempt to hard fork, however this hardfork is problematic
-and is being delayed with this version
+### Downgrade to a version < v19.2.0
 
-### Downgrade to a version < v19.0.0
-Downgrading to a version older than v19.0.0 is not supported due to changes in the evodb database. If you need to use an older version, you must either reindex or re-sync the whole chain.
+Downgrading to a version older than v19.2.0 is not supported due to changes
+in the evodb database. If you need to use an older version, you must either
+reindex or re-sync the whole chain.
 
 # Notable changes
 
-## Delaying v19 Hard Fork
+## Resolve v19 Hard Fork Issues
+
+One of the goals for the v19 Hard Fork was to activate basic BLS scheme and
+start using it in various on-chain and p2p messages. The motivation behind this
+change is the need to be aligned with IETF standards. Unfortunately, a few edge
+cases were missed in our functional tests and were not caught on testnet either.
+v19 activation attempt on mainnet hit one of these edge cases and mainnet
+stopped producing blocks. As an intermediate solution v19.1.0 was released which
+delayed the start of the signaling for the v19 Hard Fork until June 14th.
+
+To resolve these issues we had to rework the way BLS public keys are handled
+including the way they are serialized in the internal database. This made it
+incompatible with older versions of Dash Core, so a db migration path was
+implemented for all recent versions.
+
+## Improve migration and historical data support on light clients
+
+As a side-effect, the solution implemented to resolve v19 Hard Fork issues
+opened a path to simplify v19 migration for mobile wallets.
+
+With previous implementation mobile wallets would have to convert 4k+ pubkeys
+at the v19 fork point and that can easily take 10-15 seconds if not more.
+Also, after the v19 Hard Fork, if a masternode list is requested from a block
+before the v19 Hard Fork, the operator keys were coming in basic BLS scheme,
+but the masternode merkleroot hash stored in coinbase transaction at that time
+was calculated with legacy BLS scheme. Hence it was impossible to verify the
+merkleroot hash.
+
+To fix these issues a new field `nVersion` was introduced for every entry in
+`mnlistdiff` p2p message. This field indicates which BLS scheme should be used
+when deserialising the message - legacy or basic. `nVersion` of the `mnlistdiff`
+message itself will no longer indicate the scheme and must always be set to `1`.
+
+## Improve mixing support on light clients
+
+Recent changes to `dsq` and `dstx` messages allowed mobile clients that get
+masternode lists from `mnlistdiff` message to determine the masternode related
+to these messages because the `proTxHash` was used instead of the
+`masternodeOutpoint`. Once the v19 Hard Fork activates the signature of `dsq`
+and `dstx` messages will be based on the `proTxHash` which should make it
+possible for mobile clients to verify it.
+
+## Allow keeping Chainlocks enabled without signing new ones
+
+Before this version Chainlocks were either enabled or disabled. Starting with
+this version it's possible to set `SPORK_19_CHAINLOCKS_ENABLED` to a non-zero
+value to disable the signing of new Chainlocks while still enforcing the best
+known one.
+
+## Other changes
 
-The start date for the v19 Hard Fork has been delayed until June 14th. The earliest hard fork date will be roughly two
-weeks after that date. A new version will be required before this date to ensure a smooth hard fork.
+There were a few other minor changes too, specifically:
+- reindex on DB corruption should now start properly in Qt
+- a mnemonic passphrase longer than 256 symbols no longer crashes the wallet
+- a Qt node running with `-disablewawllet` flag should not crash in Settings now
+- `-masternodeblsprivkey` and `-sporkkey` values are no longer printed in
+`debug.log`
+- should use less memory in the long run comparing to older versions
+- gmp library detection should work better on macos
+- fixed a couple of typos
 
-# v19.1.0 Change log
+# v19.2.0 Change log
 
-See detailed [set of changes](https://github.com/dashpay/dash/compare/v19.0.0...dashpay:v19.1.0).
+See detailed [set of changes](https://github.com/dashpay/dash/compare/v19.1.0...dashpay:v19.2.0).
 
 # Credits
 
 Thanks to everyone who directly contributed to this release:
 
-- Kittywhiskers Van Gogh (kittywhiskers)
 - Konstantin Akimov (knst)
-- Odysseas Gabrielides (ogabrielides)
-- Oleg Girko (OlegGirko)
+- Nathan Marley (nmarley)
 - PastaPastaPasta
 - thephez
 - UdjinM6
-- Vijay Das Manikpuri (vijaydasmp)
 
-As well as everyone that submitted issues, reviewed pull requests, helped debug the release candidates, and write DIPs that were implemented in this release.
+As well as everyone that submitted issues, reviewed pull requests and helped
+debug the release candidates.
 
 # Older releases
 
@@ -89,6 +146,7 @@ Dash Core tree 0.12.1.x was a fork of Bitcoin Core tree 0.12.
 
 These release are considered obsolete. Old release notes can be found here:
 
+- [v19.1.0](https://github.com/dashpay/dash/blob/master/doc/release-notes/dash/release-notes-19.0.0.md) released May/22/2023
 - [v19.0.0](https://github.com/dashpay/dash/blob/master/doc/release-notes/dash/release-notes-19.0.0.md) released Apr/14/2023
 - [v18.2.2](https://github.com/dashpay/dash/blob/master/doc/release-notes/dash/release-notes-18.2.2.md) released Mar/21/2023
 - [v18.2.1](https://github.com/dashpay/dash/blob/master/doc/release-notes/dash/release-notes-18.2.1.md) released Jan/17/2023