Python EAS SAME Alert Message Decoder
dsame3 is a program to decode EAS/SAME (Emergency Alert System/Specific Area Message Encoding) alert messages. These messages are primarily used by the National Weather Service for weather-related warnings. dsame will decode a demodulated message, filter by SAME (US/CA) and/or event code, provide readable text, or run an external program.
DO NOT RELY ON THIS PROGRAM WHEN LOSS, DAMAGE, INJURY OR DEATH MAY OCCUR!
###NOTICE
This program was originally written by cuppa_joe, and was rewritten to include new updates and upgrade compatibility so others can modify the code without the headache of trying to work with Python 2.7. THIS IS NOT MY ORIGINAL CODE! I have modified it, and I will be updating it as necessary, since updates seem to have stopped on the original repository.
###Requirements
- Python 3.11+
- (OPTIONAL, UNLESS USING AUDIO DEMODULATION) A weather radio, RTL-SDR or other receiving/source device (ex. Microphone)
- A demodulator, such as multimon-ng (Windows binaries)
NOTE: If you are a Windows user, you may not need to install any software listed above, as the new dependency checker will take care of installing those programs for you
###Installation
For Microsoft Windows, dsame3 is distributed as a self-extracting installer, and downloads for 64-bit and 32-bit systems are available. Run the installer to install the program and optionally multimon-ng and/or rtl_fm.
For Linux and similar systems, dsame3 is available as a compressed (tar.gz or zip) archive which contains the program source. The source repository can also be cloned using git. Extract and run dsame.py using the python interpreter.
Check here to download the latest release.
###Command Line Options
usage: dsame [-h] [--msg MSG] [--same [SAME [SAME ...]]]
[--event [EVENT [EVENT ...]]] [--lang LANG]
[--loglevel {10,20,30,40,50}] [--text] [--no-text] [--version]
[--call CALL] [--command COMMAND] [--source SOURCE] [--frequency FREQ]
[--ppm PPM] [--record PATH] [--transcribe PATH]
[--transcription_model {small,medium,large}]
[--transcription_device {cpu, cuda, auto}]
[--transcription_compute {int8, int8_float16, int16, float16, float32}]
[--transcription_beam_size SIZE]
####Options
| Option | Description | Example |
|---|---|---|
msg |
Message to decode. Omit to read from standard input | --msg "ZCZC-WXR-RWT-020103-020209-020091-020121-029047-029165-029095-029037+0030-1051700-KEAX/NWS" |
same |
List of SAME codes to monitor | --same 029165 029095 |
event |
List of event codes to monitor | --event RWT TOR SVR |
loglevel |
Set log level | --loglevel 10 |
text, no-text |
Output/Omit readable message text | --text, --no-text |
call |
Call an external program | --call alert.sh |
lang |
Selects the language for the program** | --lang EN |
command |
External command line. Omit --call to send to standard output | --command "Event Code: {EEE}" |
source |
Source script/program. See /scripts for examples | --source source.sh |
frequency |
Set the RTL_FM frequency (in MHz) | --frequency 162.475 |
ppm |
Set the RTL_FM PPM (Parts Per Million) | --ppm 0 |
record |
Records default input and saves the recording to the specified path | --record "Recordings" OR --record "C:\Recordings" |
transcribe |
Creates a text file with a transcription of the alert message and saves it to the specified path (THE RECORD OPTION IS REQUIRED FOR THE TRANSCRIBE FEATURE TO WORK) | --transcribe "Transcriptions" OR --transcribe "C:\Transcriptions" |
transcription_model |
Sets the transcription model level*** (The higher the level, the more time and resources it takes) | --transcription_model medium |
transcription_device |
Sets the device used for computation of the transcrtiption model (CURRENTLY, ONLY CPU WORKS) | --transcription_device cpu |
transcription_compute |
Choose the compute method for transcription. NOTE: only certain computation choices will work with certain devices. | --transcription_device float32 |
transcription_beam_size |
Choose the beam size for transcription. NOTE: The higher the beam size, the more accurate the transcription will be, but the more time and resources it will take. | --transcription_beam_size 5 |
** The only available language options so far are English (EN) and Spanish (SP). The program defaults to English.
*** These models are originally from guillamekln. Because of file size limits, the "model.bin" file for "Model/large-v2" is missing. Please download it from here and move it to "Model/large-v2".
###Usage
dsame3 can decode EAS messages from the command line, directly from the output of an external command, or by capturing the ouput of a shell script/batch file or external program. Use msg for command line decoding. The source command is used to capture and decode the output of a script or program. Without one of these options, standard input is used. Press CTRL-C to exit the program.
####Source Scripts
Several sample source scripts and Windows batch files are provided in the scripts directory. If you are using a RTL-SDR device, edit the script to set the frequency, receiver gain and PPM error rate.
###Filtering Alerts
There are two comands used to filter alerts. None, one or both can be specified. The same command is a list of SAME area codes (United States/Canada), and the event command is a list of event codes to monitor.
####Event Codes
This list includes current and proposed event codes.
| Code | Description | Code | Description |
|---|---|---|---|
| ADR | Administrative Message | AVA | Avalanche Watch |
| AVW | Avalanche Warning | BHW | Biological Hazard Warning |
| BWW | Boil Water Warning | BZW | Blizzard Warning |
| CAE | Child Abduction Emergency | CDW | Civil Danger Warning |
| CEM | Civil Emergency Message | CFA | Coastal Flood Watch |
| CFW | Coastal Flood Warning | CHW | Chemical Hazard Warning |
| CWW | Contaminated Water Warning | DBA | Dam Watch |
| DBW | Dam Break Warning | DEW | Contagious Disease Warning |
| DMO | Demo Warning | DSW | Dust Storm Warning |
| EAN | Emergency Action Notification | EAT | Emergengy Action Termination |
| EQW | Earthquake Warning | EVA | Evacuation Watch |
| EVI | Evacuation Immediate | EWW | Extreme Wind Warning |
| FCW | Food Contamination Warning | FFA | Flash Flood Watch |
| FFS | Flash Flood Statement | FFW | Flash Flood Warning |
| FLA | Flood Watch | FLS | Flood Statement |
| FLW | Flood Warning | FRW | Fire Warning |
| FSW | Flash Freeze Warning | FZW | Freeze Warning |
| HLS | Hurricane Local Statement | HMW | Hazardous Materials Warning |
| HUA | Hurricane Watch | HUW | Hurricane Warning |
| HWA | High Wind Watch | HWW | High Wind Warning |
| IBW | Iceberg Warning | IFW | Industrial Fire Warning |
| LAE | Local Area Emergency | LEW | Law Enforcement Warning |
| LSW | Land Slide Warning | NAT | National Audible Test |
| NIC | National Information Center | NMN | Network Message Notification |
| NPT | National Periodic Test | NST | National Silent Test |
| NUW | Nuclear Plant Warning | POS | Power Outage Statement |
| RHW | Radiological Hazard Warning | RMT | Required Monthly Test |
| RWT | Required Weekly Test | SMW | Special Marine Warning |
| SPS | Special Weather Statement | SPW | Shelter in Place Warning |
| SSA | Storm Surge Watch | SSW | Storm Surge Warning |
| SVA | Severe Thunderstorm Watch | SVR | Severe Thunderstorm Warning |
| SVS | Severe Weather Statement | TOA | Tornado Watch |
| TOE | 911 Outage Emergency | TOR | Tornado Warning |
| TRA | Tropical Storm Watch | TRW | Tropical Storm Warning |
| TSA | Tsunami Watch | TSW | Tsunami Warning |
| VOW | Volcano Warning | WFA | Wild Fire Watch |
| WFW | Wild Fire Warning | WSA | Winter Storm Watch |
| WSW | Winter Storm Warning | SQW | Snow Squall Warning* |
- Snow Squall Warnings are not conveyed to the EAS, however, it was added just in case/for futureproofing.
An alert must match one of each specified alert type in order to be processed. If an alert type is omitted, any alert will match that type. In most cases, using only SAME codes to filter alerts will be the best option.
###External Commands
The call option runs an external program, script/batch file for each alert. The command option defines the command string sent to that program, script or batch file, or to standard output if the call option is omitted. The following variables can be used in command strings.
####Command Variables
| Variable | Description | Example |
|---|---|---|
| {ORG} | Organization code | WXR |
| {EEE} | Event code | RWT |
| {PSSCCC} | Geographical area (SAME) codes | 020103-020209-020091-020121-029047-029165-029095-029037 |
| {TTTT} | Purge time code | 0030 |
| {JJJHHMM} | Date code | 1051700 |
| {LLLLLLLL} | Originator code | KEAX/NWS |
| {COUNTRY} | Country code | US |
| {organization} | Organization name | National Weather Service |
| {location} | Originator location | Pleasant Hill, Missouri |
| {event} | Event type | Required Weekly Test |
| {type} | Event type indicator | T |
| {start} | Start time | 12:00 PM |
| {end} | End time | 12:30 PM |
| {length} | Length of event | 30 minutes |
| {seconds} | Event length in seconds | 1800 |
| {date} | Local date | 04/15/15 12:00:38 |
| {MESSAGE} | Readable message | (See sample text output below) |
###Sample Commands
Decoding from a text file using standard input:
cat zczc.txt | dsame.py --same 029165
Using a source script to decode from standard input:
dsame.py --same 029165 --source source.sh
Call an external script with the event type and length:
dsame.py --same 029165 --source source.sh --call alert.sh --command "{length}" "{event}"
Decoding a message from the command line:
dsame.py --msg "ZCZC-WXR-RWT-020103-020209-020091-020121-029047-029165-029095-029037+0030-1051700-KEAX/NWS" --text
Print an encoded alert string, and omit the alert text:
dsame.py --source source.sh --no-text --command "ZCZC-{ORG}-{EEE}-{PSSCCC}+{TTTT}-{JJJHHMM}-{LLLLLLLL}-"
Send an alert to a Pushbullet channel:
dsame.py --source source.sh --call pushbullet-channel.sh --command "{event}" "{MESSAGE}"
###Sample Text Output
The National Weather Service in Pleasant Hill, Missouri has issued a Required Weekly Test valid until 12:30 PM for the following counties in Kansas: Leavenworth, Wyandotte, Johnson, Miami, and for the following counties in Missouri: Clay, Platte, Jackson, Cass. (KEAX/NWS)
This experimental Pushbullet channel is updated using dsame3, multimon-ng and a rtl-sdr dongle on a Raspberry Pi 2.
###Known Issues
SASMEX/SARMEX, a Mexican system for seismic alerts, is not implemented due to lack of documentation.This issue has HOPEFULLY been resolvedA correct and complete list of ICAO location codes used by the National Weather Service messages is not available.This issue has HOPEFULLY been resolvedCountry detection may not be reliable for some locations with duplicate SAME codes.This issue has HOPEFULLY been resolved- Date and time information may not be accurate when decoding old messages or messages from another time zone.
- Multimon-ng will not decode the same alert in succession. This should only be an issue during testing and can be avoided by alternating test alerts.