New entry for CCT C-3 - "Navis_EBR SBE"

[vturpin]

Initial request

Can we add the following entry to the CCT -C3:

CodeFigureForIXIIXIX	CodeFigureForBUFR	InstrumentMakeAndType_en	EquationCoefficients_a	EquationCoefficients_b	Status
869	869	NAVIS_EBR, SBE conductivity sensor			Operational

Amendment details

NAVIS_EBR is an operational ocean profiling instrument equipped with SBE temperature sensor.
Both float and sensor passed through the Argo requierments.

Comments

No response

Requestor(s)

Victor Turpin (OceanOPS, Argo Data Management Team) - (@vturpin)
Thierry Carval (Coriolis, Argo Data Management Team) - (@tcarval)
Violeta Paba (BODC, Argo Data Management Team)- (@vpada)

Stakeholder(s)

Argo Steering Team
Argo Data Management Team
Argo Data Assembly Centers
OceanOPS

Publication(s)

Example: Manual on Codes (WMO-No. 306), Volume I.2, Common Code Table C-4

Expected impact of change

LOW

Collaborators

No response

References

No response

Validation

No response

[amilan17]

https://github.com/wmo-im/CCT/wiki/Teleconference.2&3May.2023 notes:

team reviewed quickly and have no objections

[vturpin]

NAVIS_EBR, SBE conductivity sensor

[amilan17]

https://github.com/wmo-im/CCT/wiki/Teleconference.6.7.June.2023 notes:
don't need "float serial number..."

[amilan17]

@marijanacrepulja can you check this PR? #139

[marijanacrepulja]

@amilan17 I have checked the PR. All looks good!

[SBS-EREHM]

Hi @amilan17 Eric Rehm here from Sea-Bird Scientific. I still don't see that the Initial Request in this issue 869 : NAVIS_EBR has been added to CCT C-3. In the Master branch. Id 869 still shows "Reserved". Initial request was to add:

CodeFigureForIXIIXIX	CodeFigureForBUFR	InstrumentMakeAndType_en	EquationCoefficients_a	EquationCoefficients_b	Status
869	869	NAVIS_EBR, SBE conductivity sensor			Operational

On the NERC Vocab Server (NVS) side, they are apparently blocked on this before they put it in table NVS Table R08
OneArgo/ArgoVocabs#103

[vturpin]

@amilan17
could you tell us when the change will be effective and visible in the https://github.com/wmo-im/CCT/blob/master/C03.csv and https://github.com/wmo-im/CCT/blob/master/xml/C03.xml
I understand that the PR has been approved and assume this is just a matter of the new table to be released. Am I right ?
Thanks.
V.