hw: formatting

xoseperez · Nov 30, 2022 · ae0ae0b · ae0ae0b
1 parent 3f0366d
commit ae0ae0b
Showing 1 changed file with 26 additions and 26 deletions.
diff --git a/code/espurna/config/custom.h.example b/code/espurna/config/custom.h.example
@@ -60,41 +60,41 @@
  #define THINGSPEAK_SUPPORT 0
 
  // Always publish button events to MQTT
- #define BUTTON_MQTT_SEND_ALL_EVENTS 1
+ #define BUTTON_MQTT_SEND_ALL_EVENTS 1
 
  // Buttons
- #define BUTTON1_PIN  0 // Built in button.
- #define BUTTON1_CONFIG  BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
- #define BUTTON1_RELAY  1
- #define BUTTON1_PRESS  BUTTON_MODE_NONE
- #define BUTTON1_CLICK  BUTTON_MODE_TOGGLE
- #define BUTTON1_DBLCLICK  BUTTON_MODE_NONE
- #define BUTTON1_LNGCLICK  BUTTON_MODE_OFF
- #define BUTTON1_LNGLNGCLICK  BUTTON_MODE_NONE
-
- #define BUTTON2_PIN  2 // External push button connected between IO2 and GND.
- #define BUTTON2_CONFIG  BUTTON_PUSHBUTTON | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH
- #define BUTTON2_RELAY  1
- #define BUTTON2_PRESS  BUTTON_MODE_NONE
- #define BUTTON2_CLICK  BUTTON_MODE_TOGGLE
- #define BUTTON2_DBLCLICK  BUTTON_MODE_NONE
- #define BUTTON2_LNGCLICK  BUTTON_MODE_NONE
- #define BUTTON2_LNGLNGCLICK  BUTTON_MODE_NONE
+ #define BUTTON1_PIN  0 // Built in button.
+ #define BUTTON1_CONFIG  BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
+ #define BUTTON1_RELAY  1
+ #define BUTTON1_PRESS  BUTTON_MODE_NONE
+ #define BUTTON1_CLICK  BUTTON_MODE_TOGGLE
+ #define BUTTON1_DBLCLICK  BUTTON_MODE_NONE
+ #define BUTTON1_LNGCLICK  BUTTON_MODE_OFF
+ #define BUTTON1_LNGLNGCLICK  BUTTON_MODE_NONE
+
+ #define BUTTON2_PIN  2 // External push button connected between IO2 and GND.
+ #define BUTTON2_CONFIG  BUTTON_PUSHBUTTON | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH
+ #define BUTTON2_RELAY  1
+ #define BUTTON2_PRESS  BUTTON_MODE_NONE
+ #define BUTTON2_CLICK  BUTTON_MODE_TOGGLE
+ #define BUTTON2_DBLCLICK  BUTTON_MODE_NONE
+ #define BUTTON2_LNGCLICK  BUTTON_MODE_NONE
+ #define BUTTON2_LNGLNGCLICK  BUTTON_MODE_NONE
 
  // Relays
- #define RELAY1_PIN  12
- #define RELAY1_TYPE  RELAY_TYPE_NORMAL
+ #define RELAY1_PIN  12
+ #define RELAY1_TYPE  RELAY_TYPE_NORMAL
 
  // LEDs
- #define LED1_PIN  13
- #define LED1_PIN_INVERSE  1
+ #define LED1_PIN  13
+ #define LED1_PIN_INVERSE  1
 
  // Non-default I2C on hardware UART0 pins. Make sure to disable UART for these to work!
- #define I2C_SDA_PIN   1
- #define I2C_SCL_PIN   3
+ #define I2C_SDA_PIN   1
+ #define I2C_SCL_PIN   3
 
  // BMX280 depends on I2C
- #define BMX280_SUPPORT   1
- #define BMX280_ADDRESS   0x76
+ #define BMX280_SUPPORT   1
+ #define BMX280_ADDRESS   0x76
 
 #endif