Skip to content

ycollet/coinor-cmake

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

coinor-cmake

WARNING: due to a huge set of changes, these cmakefiles doesn't work up to now. I am waiting for some stabilization before starting to fix these files.

  • Clp doesn't work with ABC ... bug in some ifdef macro.

CMake files for compiling CoinOr projects

Introduction

Up to now, only the following projects are supported:

  • Cbc
  • Clp
  • Cgl
  • CoinMP
  • CoinUtils
  • SYMPHONY
  • Vol
  • DyLP
  • Bonmin
  • Couenne
  • Ipopt

How to use these cmake files ?

  • Clone the repository
  • Copy all the files from Cbc-git to Cbc-2.10.3 (for example)
  • In Cbc-2.10.3 create a build directory (mkdir build)
  • In Cbc-2.10.3/build, launch 'cmake -DCMAKE_INSTALL_PREFIX=/opt/cbc-2.10.3 -DCMAKE_BUILD_TYPE=RELEASE ..'
  • In Cbc-2.10.3/build, launch 'cmake-gui .' to fine tune the configuration
  • Make the libraries: make
  • Install the libraries: sudo make install

An example:

$ wget https://www.coin-or.org/download/source/Cbc/Cbc-2.10.3.tgz
$ tar xvfz Cbc-2.10.3.tgz
$ git clone https://github.com/ycollet/coinor-cmake.git
$ cp -r coinor-cmake/Cbc/* Cbc-2.10.3/
$ cd Cbc-2.10.3
$ mkdir build
$ cd build
$ cmake -DCMAKE_INSTALL_PREFIX=/opt/cbc-2.10.3 -DCMAKE_BUILD_TYPE=RELEASE ..
# Now activate all the options you want ... and click on  configure + generate and exit
$ cmake-gui .
$ make
$ sudo make install

Under Windows, with Visual Studio:

  • Clone the repository
  • Copy all the files from Cbc-git to Cbc-2.10.3 (for example)
  • In Cbc-2.10.3 create a build directory (mkdir build)
  • In Cbc-2.10.3/build, launch 'cmake -DCMAKE_INSTALL_PREFIX=d:/cbc-2.10.3 -DCMAKE_BUILD_TYPE=RELEASE -G "NMake Makefiles" ..'
  • In Cbc-2.10.3/build, launch 'cmake-gui .' to fine tune the configuration
  • Make the libraries: nmake
  • Install the libraries: nmake install

Compilation using llvm

LLVM / Clang doesn't support OpenMP yet. So, be careful with the OpenMP option (like with Symphony).

To use clang c++-analyzer, follow these steps (from http://garykramlich.blogspot.fr/2011/10/using-scan-build-from-clang-with-cmake.html):

$ mkdir build
$ cd build
$ cmake -DCMAKE_C_COMPILER=/usr/share/clang/scan-build/ccc-analyzer -DCMAKE_CXX_COMPILER=/usr/share/clang/scan-build/c++-analyzer ..
$ scan-build make

To use a custom version of clang:

$ scan-build --use-analyzer=/opt/llvm-devel/bin/clang make

When you're build is finished you will see two lines, like the ones shown below.

scan-build: 6 bugs found.
scan-build: Run 'scan-view /tmp/scan-build-2011-10-19-1' to examine bug reports.

As you can see, it found 6 bugs in my code. To view the bugs, the easiest way is to run:

$ scan-view /tmp/scan-build-2011-10-19-1

Under Fedora, these tools are installed here:

  • /usr/libexec/clang-analyzer/scan-build/c++-analyzer
  • /usr/libexec/clang-analyzer/scan-build/ccc-analyzer
  • /usr/libexec/clang-analyzer/scan-build/scan-build
$ mkdir build
$ cd build
$ cmake -DCMAKE_INSTALL_PREFIX=~/cbc-bin -DCMAKE_BUILD_TYPE=DEBUG -DCMAKE_CXX_COMPILER=/usr/bin/clang -DCMAKE_CXX_FLAGS="-fsanitize=memory" ..
# or
$ cmake -DCMAKE_INSTALL_PREFIX=~/cbc-bin -DCMAKE_BUILD_TYPE=DEBUG -DCMAKE_CXX_COMPILER=/usr/bin/clang++ -DCMAKE_C_COMPILER=/usr/bin/clang \ 
                                                                  -DCMAKE_CXX_FLAGS="-fsanitize=address,memory" -DCMAKE_C_FLAGS="-fsanitize=address,memory" ..
$ make

All the sanitize options for clang are detailled here: http://clang.llvm.org/docs/UsersManual.html#controlling-code-generation

Compilation using intel compiler

$ mkdir build
$ cd build
$ cmake -DCMAKE_INSTALL_PREFIX=~/cbc-bin -DCMAKE_BUILD_TYPE=DEBUG -DCMAKE_CXX_COMPILER=/opt/intel/bin/icpc -DCMAKE_C_COMPILER=/opt/intel/bin/icc ..
$ make

Compilation using Visual studio compiler

First, start the Visual Studio console. Now, launch cmake

$ mkdir build
$ cd build
$ cmake -DCMAKE_INSTALL_PREFIX=d:/cbc-bin -DCMAKE_BUILD_TYPE=DEBUG -G "NMake Makefiles" ..
$ nmake

Compilation using mingw under Linux

First, you will need to install the mingw (32 or 64 bits) packages from the repositories of your Linux distribution. Then, edit the file cmake/mingw64-toolchain.cmake to fine tune wrt your mingw install. You can add another root directory where mingw will look for installed libraries by adding these lines:

# here is the target environment located
set(USER_ROOT_PATH /home/me/me-win32-dev)
set(CMAKE_FIND_ROOT_PATH  /usr/${COMPILER_PREFIX} ${USER_ROOT_PATH})

Now, run cmake:

$ mkdir build
$ cd build
$ cmake -DCMAKE_INSTALL_PREFIX=/home/me/cbc-bin -DCMAKE_BUILD_TYPE=RELEASE -DCMAKE_TOOLCHAIN_FILE=cmake/mingw64-toolchain.cmake ..
$ make

This command should produce a Windows executable.

Starting tests

To enable a more complete list of tests:

$ cd build
$ cmake -DCOIN_ENABLE_DOWNLOAD_ZLIB=ON -DCOIN_ENABLE_DOWNLOAD_DATA_TEST=ON -DCMAKE_BUILD_TYPE=RELEASE ..
$ make

The option COIN_ENABLE_DOWNLOAD_DATA_TEST allows to download a set of tests from the coin-or website and it will install these files in the build directory. The COIN_ENABLE_DOWNLOAD_ZLIB activate the support of zlib in the CoinUtils library. With this support, we are now able to read compressed test files.

You can some basic tests for cbc, clp and symphony:

$ ctest --print-labels # Display all available labels
$ ctest -N # Display all available tests name (you can use the -R, -L, -LE flags with -N)
$ ctest -R exmip1 # To run all tests containing exmip1 in their names
$ ctest -L MPS # To run all tests which have the MPS label (available labels are MPS, LP, LONG)
$ ctest -LE LONG # To run all tests which doesn't have the LONG label
$ ctest -LE (LONG|FAIL) # To run all tests which doesn't have the LONG or FAIL labels

Performing coverage

Using lcov for code coverage (Linux only) - gcov and lcov must be installed on the system. The following steps are performed:

  • first, activate COIN_COMPILE_COVERAGE
  • activate all the solvers
  • compile: make
  • run the tests: make test or ctest ...
  • generate the coverage report: make coverage

You can trigger a code coverage analysis by issuing the following commande: make coverage

Be careful to activate the right set of tests (not the long one).

Compiling Lapack under Windows with MinGW:

 cmake -DCMAKE_INSTALL_PREFIX=c:/lapack-3.7.0 -DCMAKE_BUILD_TYPE_RELEASE -DBUILD_SHARED_LIBS=ON \
       -DCMAKE_GNUtoMS=ON -DCMAKE_GNUtoMS_VCVARS="c:/Program Files (x86)/Microsoft Visual Studio 11/VC/vcvarsall.bat" \
       -G "Unix Makefiles" ..
 c:/MinGW64/MinGW64/bin/mingw32-make.exe
 c:/MinGW64/MinGW64/bin/mingw32-make.exe install
  • copy libgfortran-3.dll libquadmath-0.dll libgcc_s_seh-1.dll libwinpthread.dll from c:\MinGW64\MinGW64\bin to c:/lapack-3.7.0/bin
  • zip c:/lapack-3.7.0 to lapack-3.7.0.zip

Now, you can use this zip for the compilation of Coin:

Set COIN_MINGW_LAPACK_ZIP_FILE to c:/lapack-3.7.0.zip Check COIN_ENABLE_DOWNLOAD_MINGW_LAPACK Configure Generate make

Notes

The f2c.h file included in each ThirdParty directory is copied from the Fedora f2c package. This header is used to fix compilation of clapack ...

Compiling using git repo:

$ git clone https://github.com/ycollet/coinor-cmake.git $ git clone https://github.com/coin-or/Cbc.git $ cd Cbc $ git clone https://github.com/coin-or-tools/BuildTools/ $ BuildTools/get.dependencies.sh fetch $ cp -r ../coinor-cmake/Cbc . $ mkdir build $ cd build $ cmake -DCMAKE_INSTALL_PREFIX=/opt/cbc-devel -DCMAKE_BUILD_TYPE=RELEASE .. $ make

Compiling using coinbrew:

You have two ways to get a coin-or project via coinbrew

$ git clone https://github.com/coin-or/coinbrew.git $ coinbrew/coinbrew fetch --git --main-proj="Cbc" $ cp -r ../coinor-cmake/Cbc/* Cbc/ $ cd Cbc $ mkdir build $ cd build $ cmake -DCMAKE_INSTALL_PREFIX=/opt/cbc-devel -DCMAKE_BUILD_TYPE=RELEASE .. $ make

or:

$ git clone https://github.com/coin-or/Cbc $ cd Cbc $ ../coinbrew/coinbrew fetch --git --main-proj=. --skip="Cbc" $ cp -r ../coinor-cmake/Cbc/* . $ mkdir build $ cd build $ cmake -DCMAKE_INSTALL_PREFIX=/opt/cbc-devel -DCMAKE_BUILD_TYPE=RELEASE .. $ make

if you've got an error related to git describe:

$ git tag test HEAD~1

Or you can add a tag at the first commit of a branch:

$ git log | tail Author: Andreas Waechter andreas.waechter@northwestern.edu Date: Thu Oct 21 01:03:09 2004 +0000

Initial revision

commit 2dc3ded2d97f2c889ae7baafa49128d2bec1f25b Author: (no author) anonymous@coin-or.clemson.edu Date: Thu Oct 21 01:03:09 2004 +0000

New repository initialized by cvs2svn.

$ git tag first_commit 2dc3ded2d97f2c889ae7baafa49128d2bec1f25b

$ cmake -DCMAKE_INSTALL_PREFIX=/opt/cbc-devel -DCMAKE_BUILD_TYPE=RELEASE ..

You must perform this step for the following projects: Osi, Ipopt, Bonmin, CoinMP, DyLP, Couenne

Osi: git tag initial_import 59f4d6c83d556163e80d2697a2c9196c1fadae80

Ipopt: git tag initial_import 6afa9fa918e46db3f04f6cdef92370e0ea957417

Bonmin: git tag initial_import e6dfd2f1be00864a7827116522f4c5c14f9dc962

Couenne: git tag initial_import 68e05b0b6f6888ffcb46ad0af49572d319818ad5

To do

Tasks:

  • use add_test to test various combination of flags

Benchmark

This benchmark uses the tests from netlib and miplib2000.

  • COIN_ENABLE_DOWNLOAD_DATA_TEST
  • COIN_ENABLE_DOWNLOAD_ZLIB

The options tested are the following ones:

  • COIN_ENABLE_DOWNLOAD_LAPACK
  • COIN_ENABLE_DOWNLOAD_MUMPS
  • COIN_ENABLE_DOWNLOAD_SUITESPARSE
  • COIN_ENABLE_DOWNLOAD_CLAPACK

The command used to launch the tests:

$ ctest -LE LONG

With Lapack fortran and Mumps (using mumps / libseq and not MPI):

88% tests passed, 82 tests failed out of 680

Label Time Summary: CBC = 1690.32 sec (329 tests) CLP = 133.33 sec (329 tests) INFEAS = 33.03 sec (56 tests) LP = 0.01 sec (1 test) MIPLIB = 1593.88 sec (204 tests) MPS = 1837.59 sec (677 tests) NETLIB = 158.89 sec (360 tests) SAMPLE = 9.54 sec (34 tests) WARNING = 56.65 sec (8 tests)

Total Test time (real) = 1838.46 sec

Without options:

88% tests passed, 80 tests failed out of 680

Label Time Summary: CBC = 1004.88 sec (329 tests) CLP = 52.22 sec (329 tests) INFEAS = 12.52 sec (56 tests) LP = 0.00 sec (1 test) MIPLIB = 967.56 sec (204 tests) MPS = 1062.23 sec (677 tests) NETLIB = 62.45 sec (360 tests) SAMPLE = 3.80 sec (34 tests) WARNING = 21.92 sec (8 tests)

Total Test time (real) = 1062.97 sec

With lapack fortran:

88% tests passed, 79 tests failed out of 680

Label Time Summary: CBC = 995.23 sec (329 tests) CLP = 50.12 sec (329 tests) INFEAS = 12.92 sec (56 tests) LP = 0.01 sec (1 test) MIPLIB = 954.95 sec (204 tests) MPS = 1050.36 sec (677 tests) NETLIB = 63.19 sec (360 tests) SAMPLE = 3.82 sec (34 tests) WARNING = 22.82 sec (8 tests)

Total Test time (real) = 1051.04 sec

With Lapack fortran and SuiteSparse:

88% tests passed, 79 tests failed out of 680

Label Time Summary: CBC = 1014.70 sec (329 tests) CLP = 54.28 sec (329 tests) INFEAS = 12.29 sec (56 tests) LP = 0.01 sec (1 test) MIPLIB = 980.29 sec (204 tests) MPS = 1074.20 sec (677 tests) NETLIB = 61.76 sec (360 tests) SAMPLE = 3.80 sec (34 tests) WARNING = 21.88 sec (8 tests)

Total Test time (real) = 1074.91 sec

With CLapack:

88% tests passed, 79 tests failed out of 680

Label Time Summary: CBC = 957.43 sec (329 tests) CLP = 47.56 sec (329 tests) INFEAS = 11.75 sec (56 tests) LP = 0.01 sec (1 test) MIPLIB = 921.59 sec (204 tests) MPS = 1009.95 sec (677 tests) NETLIB = 58.09 sec (360 tests) SAMPLE = 3.59 sec (34 tests) WARNING = 22.01 sec (8 tests)

Total Test time (real) = 1010.68 sec

About

CMake files for compiling CoinOr projects

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published