packets stop at 73

[warchicken]

i have this issue im using ubuntu mate on a usb bootlabe device, i have the correct payload for usa 10.7 i change it to smashpayload.bin, i have a 1.0.1 pcap , i compiled the patch to aircrack succesfully
im using wlan0 interface im using channel 6 everything works fine but when it starts to send packages it goes all the way to 73 then stops and it like it freezes or something becasue i cant enter anymore comands i have to forcefully close it, can some one help me, im using the physical game cartridge( my first game) and i have a new 3ds xl on fw 10.7 and im using a hp laptop. (touchsmart notebook) dont know whats wrong this is my only entry point help!!

[ghost]

I tried it with a laptop and it kept stopping at 93 packets. I now tried it with another laptop and it sends packets successfully. A lot of other people have reported the same issue, but I've yet to find anyone resolve it.

Your best bet is to try to use another network adapter. Apparently USB adapters work more reliably, but I'm not sure on this. If you're going to buy a new adapter make sure that it's supported, of course.

EDIT: One thing I should mention. At first I thought that maybe some network manager kept stopping the hack midway. You can use the command "airmon-ng check" to check processes that could be problematic, and "airmon-ng check kill" to kill those. This could be worth a try, but it didn't solve it for me.

[warchicken]

Thank if i get My hands on a USB WiFi adapter ill try it!! So far no
homebrew.. Waiting for an entry point that doesnt involved buying a game
El 28/03/2016 08:15, "pancakes077" notifications@github.com escribió:

I tried it with a laptop and it kept stopping at 93 packets. I now tried
it with another laptop and it sends packets successfully. A lot of other
people have reported the same issue, but I've yet to find anyone resolve it.

Your best bet is to try to use another network adapter. Apparently USB
adapters work more reliably, but I'm not sure on this. If you're going to
buy a new adapter make sure that it's supported, of course.

—
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub
#18 (comment)

[Quin452]

@warchicken I found it was my wireless card at fault. I bought a cheap one, so now I can send a beacon out as well as browse the internet.

The issue fo rme was the wls version, but the USB is neither wls or wlan.

[iank1434]

@Quin452 Which adapter did you buy? I'm having the same problem and don't want to end up buying one that doesn't work, either.

[profi200]

I had no problems with my internal WiFi. Intel ones apparently play nice with this unlike some cheap ones. If it still fails the only option is using a known working USB WiFi dongle.

[iank1434]

@profi200 Did you have to do anything additional to get it to work? I have an Intel internal (Wireless-AC 3160), and it still freezes at 93.

[profi200]

I did it just like described. Compiled the tool with patch and switched to monitor mode.