Add MAX32670

boards/adi/max32670evkit/Kconfig.max32670evkit

@@ -0,0 +1,7 @@
+# MAX32670EVKIT boards configuration
+
+# Copyright (c) 2024 Analog Devices, Inc.
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_MAX32670EVKIT
+	select SOC_MAX32670

boards/adi/max32670evkit/board.cmake

@@ -0,0 +1,7 @@
+# Copyright (c) 2024 Analog Devices, Inc.
+# SPDX-License-Identifier: Apache-2.0
+
+board_runner_args(openocd --cmd-pre-init "source [find interface/cmsis-dap.cfg]")
+board_runner_args(openocd --cmd-pre-init "source [find target/max32670.cfg]")
+
+include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)

boards/adi/max32670evkit/board.yml

@@ -0,0 +1,8 @@
+# Copyright (c) 2024 Analog Devices, Inc.
+# SPDX-License-Identifier: Apache-2.0
+
+board:
+  name: max32670evkit
+  vendor: adi
+  socs:
+    - name: max32670

boards/adi/max32670evkit/doc/index.rst

@@ -0,0 +1,194 @@
+.. _max32670_evkit:
+
+MAX32670EVKIT
+#############
+
+Overview
+********
+The MAX32670 evaluation kit (EV kit) provides a platform for evaluation capabilities
+of the MAX32670. The MAX32670 is an ultra-low-power, cost-effective, highly reliable
+32-bit microcontroller that enables designs with complex sensor processing without
+compromising battery life. It combines a flexible and versatile power management unit
+with the powerful Arm® Cortex®-M4 core with floating point unit (FPU).
+The MAX32670 also offers legacy designs an easy and cost optimal upgradepath
+from 8-bit or 16-bit microcontrollers.
+
+The Zephyr port is running on the MAX32670 MCU.
+
+.. image:: img/max32670evkit.webp
+   :align: center
+   :alt: MAX32670 EVKIT
+
+Hardware
+********
+
+- MAX32670 MCU:
+
+  - High-Efficiency Microcontroller for Low-Power, High-Reliability Devices
+
+    - Arm Cortex-M4 Core with FPU up to 100MHz
+    - 384KB Flash Memory with Error Correction
+    - 160KB SRAM (128KB with ECC Enabled),Optionally Preserved in Lowest Power Modes
+    - 16KB Unified Cache with ECC
+
+    - UART Bootloader
+
+        - Dual- or Single-Supply Operation
+        - Ultra-Low 0.9V to 1.1V VCORE Supply Voltage
+        - Internal LDO Operation from 1.7V to 3.6V SingleSupply
+
+    - Wide Operating Temperature: -40°C to +105°C
+
+  - Flexible Clocking Schemes
+
+    - Internal High-Speed 100MHz Oscillator
+    - Internal Low-Power 7.3728MHz and Ultra-Low-Power 80kHz Oscillators
+    - 16MHz to 32MHz Oscillator (External CrystalRequired)
+    - 32.768kHz Oscillator (External Crystal Required)
+    - External Clock Input for the Core
+    - External Clock Input for the LPUART and LPTMR
+
+  - Power Management Maximizes Uptime for Battery Applications
+
+    - 44μA/MHz Active at 0.9V up to 12MHz
+    - 50μA/MHz Active at 1.1V up to 100MHz
+    - 2.6μA Full Memory Retention Power in BACKUPMode at VDD = 1.8V
+    - 350nA Ultra-Low-Power RTC at VDD = 1.8V
+    - Wake from LPUART or LPTMR
+
+  - Optimal Peripheral Mix Provides Platform Scalability
+
+    - Up to 31 General-Purpose I/O Pins
+    - Up to Three SPI Master/Slave (up to 50MHz)
+    - Up to Three 4-Wire UART
+    - One Low-Power UART (LPUART)
+    - Up to Three I2C Master/Slave 3.4Mbps High Speed
+    - 8-Channel Standard DMA Controller
+    - Up to Four 32-Bit Timers (TMR)
+    - Up to Two Low-Power 32-Bit Timers (LPTMR)
+    - Two Windowed Watchdog Timers
+    - One I2S Slave for Digital Audio Interface
+
+  - Security and Integrity
+
+    - Available Secure Boot
+    - AES 128/192/256 Hardware Acceleration Engine
+    - 32-Bit CRC Acceleration Engine
+
+- Benefits and Features of MAX32670EVKIT:
+
+  - USB 2.0 Micro B to Serial UART Bridge
+  - UART0 and UART3 Interface is Selectable Through On-Board Jumpers
+  - On-Board MAX32625PICO-Based Debugger
+  - Boot Load Enable Circuitry
+  - SPI and I2C Signals Accessed Through 0.1in Headers
+  - GPIOs and Miscellaneous Signals Accessed Through 0.1in Headers
+  - Board Power Provided by USB Port
+  - On-Board SIMO Regulator and LDO for IC and Peripherals
+  - Individual Power Measurement on all IC Rails Through Jumpers
+  - Two General-Purpose LED and One GeneralPurpose Pushbutton Switch
+
+Supported Features
+==================
+
+Below interfaces are supported by Zephyr on MAX32670EVKIT.
+
++-----------+------------+-------------------------------------+
+| Interface | Controller | Driver/Component                    |
++===========+============+=====================================+
+| NVIC      | on-chip    | nested vector interrupt controller  |
++-----------+------------+-------------------------------------+
+| SYSTICK   | on-chip    | systick                             |
++-----------+------------+-------------------------------------+
+| CLOCK     | on-chip    | clock and reset control             |
++-----------+------------+-------------------------------------+
+| GPIO      | on-chip    | gpio                                |
++-----------+------------+-------------------------------------+
+| UART      | on-chip    | serial                              |
++-----------+------------+-------------------------------------+
+
+
+Connections and IOs
+===================
+
++-----------+---------------+---------------+--------------------------------------------------------------------------------------------------+
+| Name      | Name          | Settings      | Description                                                                                      |
++===========+===============+===============+==================================================================================================+
+| JP1       | P0_22         |               |                                                                                                  |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | Open      | |  | Disconnects red LED from P0_22.                                               |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | Close     | |  | Connects red to P0_22.                                                        |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               |               |                                                                                                  |
++-----------+---------------+---------------+--------------------------------------------------------------------------------------------------+
+| JP2       | P0_23         | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | Open      | |  | Disconnects green LED from P0_23.                                             |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | Close     | |  | Connects green LED to P0_23.                                                  |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               |               |                                                                                                  |
++-----------+---------------+---------------+--------------------------------------------------------------------------------------------------+
+| JP3       | P0_20         | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           | P0_26         | | 2-1       | |  | Connects the USB to serial port P0_8 (UART0_RX).                              |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | 2-3       | |  | Connects the USB to serial port P0_26 (LPUART0_RX).                           |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               |               |                                                                                                  |
++-----------+---------------+---------------+--------------------------------------------------------------------------------------------------+
+| JP4       | P0_9          | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           | P0_27         | | 2-1       | |  | Connects the USB to serial port P0_9 (UART0_TX).                              |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | 2-3       | |  | Connects the USB to serial port P0_27 (LPUART0_TX).                           |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               |               |                                                                                                  |
++-----------+---------------+---------------+--------------------------------------------------------------------------------------------------+
+| JP5       | VDD           | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | Open      | |  | Disconnects power to VDD.                                                     |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | Close     | |  | Connects power to VDD.                                                        |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               |               |                                                                                                  |
++-----------+---------------+---------------+--------------------------------------------------------------------------------------------------+
+| JP6       | VCORE         | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | Open      | |  | Disconnects power to VCORE.                                                   |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | Close     | |  | Connects power to VCORE.                                                      |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               |               |                                                                                                  |
++-----------+---------------+---------------+--------------------------------------------------------------------------------------------------+
+| JP7       | SIMO RSEL2    | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | 1-2       | |  | Sets output 2 of the SIMO regulator to 0.9V.                                  |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | 3-4       | |  | Sets output 2 of the SIMO regulator to 1.0V.                                  |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               | | 5-6       | |  | Sets output 2 of the SIMO regulator to 1.1V.                                  |               |
+|           |               | +-----------+ |  +-------------------------------------------------------------------------------+               |
+|           |               |               |                                                                                                  |
++-----------+---------------+---------------+--------------------------------------------------------------------------------------------------+
+
+Programming and Debugging
+*************************
+
+Flashing
+========
+
+The MAX32670 EVKIT integrates a MAX32625PICO based debugger for DAPLink functionality.
+
+
+Once the debug probe is connected to your host computer, then you can simply run the
+``west flash`` command to write a firmware image into flash.
+
+Debugging
+=========
+
+Please refer to the `Flashing`_ section and run the ``west debug`` command
+instead of ``west flash``.
+
+References
+**********
+
+- `MAX32670EVKIT web page`_
+
+.. _MAX32670EVKIT web page:
+   https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/max32670evkit.html

boards/adi/max32670evkit/max32670evkit.dts

@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2024 Analog Devices, Inc.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/dts-v1/;
+
+#include <adi/max32/max32670.dtsi>
+#include <adi/max32/max32670-pinctrl.dtsi>
+#include <zephyr/dt-bindings/gpio/adi-max32-gpio.h>
+#include <zephyr/dt-bindings/input/input-event-codes.h>
+
+/ {
+	model = "Analog Devices MAX32670EVKIT";
+	compatible = "adi,max32670evkit";
+
+	chosen {
+		zephyr,console = &uart0;
+		zephyr,shell-uart = &uart0;
+		zephyr,sram = &sram3;
+		zephyr,flash = &flash0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1: led_1 {
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+			label = "Red LED";
+		};
+		led2: led_2 {
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+			label = "Blue LED";
+		};
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+		pb1: pb1 {
+			gpios = <&gpio0 21 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+			label = "SW2";
+			zephyr,code = <INPUT_KEY_0>;
+		};
+	};
+
+	/* These aliases are provided for compatibility with samples */
+	aliases {
+		led0 = &led1;
+		led1 = &led2;
+		sw0 = &pb1;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0a_tx_p0_9 &uart0a_rx_p0_8>;
+	pinctrl-names = "default";
+	current-speed = <115200>;
+	data-bits = <8>;
+	parity = "none";
+	status = "okay";
+};
+
+&clk_ipo {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};

boards/adi/max32670evkit/max32670evkit.yaml

@@ -0,0 +1,13 @@
+identifier: max32670evkit
+name: max32670evkit
+type: mcu
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+supported:
+  - gpio
+  - serial
+ram: 160
+flash: 384

boards/adi/max32670evkit/max32670evkit_defconfig

@@ -0,0 +1,13 @@
+# Copyright (c) 2024 Analog Devices, Inc.
+# SPDX-License-Identifier: Apache-2.0
+
+# Enable GPIO
+CONFIG_GPIO=y
+
+# Console
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
+
+# Enable UART
+CONFIG_SERIAL=y
+CONFIG_UART_INTERRUPT_DRIVEN=y