Version 1.1.0.1-prerelease - <Spit'n'Polish>

[zer0Kerbal]

Version 1.1.0.1-prerelease - <Spit'n'Polish>

• Released on 2020-02-23
• Kerbal Space Program 1.9.1

Thank You

• KottabosGames for the review and suggestions!
• BenjaminCronin
  • for pointed out decorative right brace in changelogs
    • wite-out applied.
  • Also dangling VERSION
    • superglued applied.

Adjusted

• All Parts
  • strength
  • temperatures
  • adjusted breakingForce on all parts from 50 to 200 (except where noted)
  • adjusted breakingTorque on all parts from 50 to 200(except where noted)
  • adjusted B9fuelswitch to have LF come after Structural instead of LFO
  • [explosionPotential] = 0.5
  • [buoyancy] = 0.1

Added

• [DM-fuselage-intake.cfg]
  • same specs like the Ram Air Intake.
  • Added
    • [thermalMassModifier] = 12.0
    • machcurve to ModuleResourceIntake on intake
  • Adjusted
    • intakeSpeed from 10 to 15
    • [RESOURCE] [IntakeAir] amount/maxAmount from 0.2 to 2.0
    • [entryCost] from 1600 to 14000
    • [cost] from 2000 to 2680
    • [maximum_drag] from 0.2 to 0.3
    • [minimum_drag] from 0.2 to 0.3
  • added
    • [ModuleAnimateHeat]
    • [stackSymmetry] = 2
• [DM-fuselage-cone]
  • basing stats on: Advanced Nose Cone - Type B (pointyNoseConeB)
  • Adjusted
    • [scale] = 0.9375, 0.9375, 0.9375 from 1.0, 0.9375, 1.0
      • noted by Kottabo
  • [entryCost] to 8000 from 1600
  • corrected typo on [maximum_drag] should have been 0.1 instead it was 0.11
  • [angularDrag] to 0.25 from 0.5
  • [maxTemp] to 2000 from 2900
  • Added
    • size2 to [bulkheadProfiles] = mk1, size2, srf
    • [explosionPotential] = 0.5
    • [CoMOffset] = 0.0, 0.0, -0.313
    • [CoPOffset] = 0.0, 0.0, -0.313
    • [CoLOffset] = 0.0, 0.0, -0.313
    • [CenterOfDisplacement] = 0.0, -0.2, 0.0
    • [thermalMassModifier] = 6.0
    • [emissiveConstant] = 0.95
    • [buoyancy] = 0.1
    • [ModuleAnimateHeat]
• [DM-fuselage-tailboom]
  • Based upon Tail Connector A (airplaneTailB)
  • Adjusted
    • [entryCost] to 2500 from 1600
    • [cost] to 500 from 200
    • [crashTolerance] to 8 from 20
    • [maxTemp] to 2200 from 2900
  • Added
    • [thermalMassModifier] = 6.0
    • [emissiveConstant] = 0.95
    • [explosionPotential] = 0.5
    • [CoMOffset] = 0.0, -1.5, 0.0
    • [CoPOffset] = 0.0, -1.5, 0.0
    • [CoLOffset] = 0.0, -1.5, 0.0
    • [CenterOfDisplacement] = 0.0, -1.5, 0.0
    • [buoyancy] = 0.1
    • [explosionPotential] = 0.5
    • [ModuleAnimateHeat]
• [DM-fuselage-X1] DMF - Flat Fuel Tank X1
  • based upon Mk2 Rocket Fuel Fuselage Short(mk2FuselageShortLFO)
  • Adjusted
    • [entryCost] to 15000 from 1600
    • [crashTolerance] to 50 from 10
    • [maxTemp] to 2500 from 2900
  • Added
    • [buoyancy] = 0.1
    • srf to [bulkheadProfiles] = mk1, srf
    • [mirrorRefAxis] = 0, 0, -1
    • [ModuleLiftingSurface]
• [DM-fuselage-X2] DMF - Flat Fuel Tank X2
  • based upon Mk2 Rocket Fuel Fuselage(mk2FuselageLongLFO)
  • Adjusted
    • [entryCost] to 18000 from 1600
    • [crashTolerance] to 50 from 10
    • [maxTemp] to 2500 from 2900
  • Added
    • [buoyancy] = 0.1
    • srf to [bulkheadProfiles] = mk1, srf
    • [mirrorRefAxis] = 0, 0, -1
    • [ModuleLiftingSurface]
• [DM-fuselage-front] DMF - Flat End
  • based upon (noseConeAdapter) NCS Adapter
    • Adjusted
      • [entryCost] to 8000 from 600
      • [mass] to 0.1 from 0.11
      • [angularDrag] from 0.25 // 0.5
      • [maxTemp] to 2400 from 2900
    • Added
      • [explosionPotential] = 0.5
      • [CenterOfDisplacement] = 0.0, -0.2, 0.0
      • [thermalMassModifier] = 6.0
      • [emissiveConstant] = 0.95
      • [buoyancy] = 0.1
      • [bulkheadProfiles] = mk1, size0
      • [ModuleAnimateHeat]
• [DM-fuselage-adapter] DMF - Flat to 1.25m Round Adapter
  • based upon (mk2SpacePlaneAdapter) Mk2 to 1.25m Adapter
    • Adjusted
      • [entryCost] to 14000 from 1600
      • [minimum_drag] to 0.1 from 0.3
      • [angularDrag] to 2 from 1
      • [crashTolerance] to 50 from 10
      • [breakingForce] to 50 from 200
      • [breakingTorque] to 50 from 200
      • [maxTemp] to 2500 from 2900
    • Added
      • srf to [bulkheadprofiles] = mk1, size1, srf
      • [buoyancy] = 0.1
      • [emissiveConstant] = 0.8
      • [explosionPotential] = 0.5
      • [ModuleLiftingSurface]

Status

• Issues
  • updates Previous Releases #24 - Previous Releases
  • closes 1.1.0.1-prerelease #26 - 1.1.0.1-prerelease
  • updates Asset Updates #28 - Asset Updates

---

[zer0Kerbal]

📑