[Keyboard] Add Big Knob board (qmk#22292)

Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>

keyboards/jpe230/big_knob/big_knob.c

@@ -0,0 +1,97 @@
+// Copyright 2023 jpe230 (@jpe230)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qp.h"
+#include "qp_comms.h"
+#include "qp_st77xx_opcodes.h"
+#include "gfx/logo.qgf.h"
+
+painter_device_t lcd;
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// Init board:
+// - Draw logo
+
+void keyboard_post_init_kb(void) {
+    backlight_set(BACKLIGHT_DEFAULT_LEVEL);
+
+    wait_ms(LCD_WAIT_TIME);
+
+    // Initialise the LCD
+    lcd = qp_st7735_make_spi_device(LCD_HEIGHT, LCD_WIDTH, LCD_CS_PIN, LCD_DC_PIN, LCD_RST_PIN, LCD_SPI_DIVISOR, 0);
+    qp_init(lcd, LCD_ROTATION);
+
+    // Invert Colour
+    #ifdef LCD_INVERT_COLOUR
+    qp_comms_start(lcd);
+    qp_comms_command(lcd, ST77XX_CMD_INVERT_ON);
+    qp_comms_stop(lcd);
+    #endif
+
+    // Apply Offset
+    qp_set_viewport_offsets(lcd, LCD_OFFSET_X, LCD_OFFSET_Y);
+
+    // Turn on the LCD and clear the display
+    qp_power(lcd, true);
+    qp_rect(lcd, 0, 0, LCD_WIDTH, LCD_HEIGHT, HSV_BLACK, true);
+
+    // Show logo
+    painter_image_handle_t logo_image = qp_load_image_mem(gfx_logo);
+    qp_drawimage(lcd, 0, 0, logo_image);
+
+    keyboard_post_init_user();
+}
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// Lights handling:
+//  - Turn off backlight (screen) after timeout or suspend
+//  - Turn off rgblight after timeout or suspend
+
+bool lights_off = false;
+
+__attribute__((weak)) void lights_wakeup_user(void) {};
+__attribute__((weak)) void lights_suspend_user(void) {};
+
+void backlight_wakeup(void) {
+    backlight_set(BACKLIGHT_DEFAULT_LEVEL);
+}
+
+void backlight_suspend(void) {
+    backlight_set(0);
+}
+
+void lights_wakeup(void) {
+    lights_off = false;
+    rgblight_wakeup();
+    backlight_wakeup();
+    lights_wakeup_user();
+}
+
+void lights_suspend(void) {
+    lights_off = true;
+    lights_suspend_user();
+    rgblight_suspend();
+    backlight_suspend();
+}
+
+void housekeeping_task_kb(void) {
+    if ( lights_off && last_input_activity_elapsed() <= LIGHTS_TIMEOUT)
+    {
+        lights_wakeup();
+    }
+    if (!lights_off && last_input_activity_elapsed() > LIGHTS_TIMEOUT) {
+        lights_suspend();
+    }
+}
+
+void suspend_power_down_kb(void) {
+    lights_suspend();
+    qp_power(lcd, false);
+    suspend_power_down_user();
+}
+
+void suspend_wakeup_init_kb(void) {
+    qp_power(lcd, true);
+    lights_wakeup();
+    suspend_wakeup_init_user();
+}

keyboards/jpe230/big_knob/config.h

@@ -0,0 +1,37 @@
+// Copyright 2023 jpe230 (@jpe230)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+// SPI pins
+#define SPI_DRIVER SPID0
+#define SPI_SCK_PIN GP22
+#define SPI_MOSI_PIN GP23
+#define SPI_MISO_PIN GP20 // Unused
+
+// LCD Configuration
+#define LCD_RST_PIN GP21
+#define LCD_CS_PIN GP8
+#define LCD_DC_PIN GP9
+#define LCD_BLK_PIN GP7
+#define LCD_SPI_DIVISOR 4
+#define LCD_WAIT_TIME 150
+#define LCD_WIDTH 160
+#define LCD_HEIGHT 80
+#define LCD_ROTATION QP_ROTATION_270
+#define LCD_OFFSET_X 1
+#define LCD_OFFSET_Y 26
+#define LCD_INVERT_COLOUR
+
+// QP Configuration
+#define QUANTUM_PAINTER_SUPPORTS_NATIVE_COLORS TRUE
+#define ST7735_NO_AUTOMATIC_VIEWPORT_OFFSETS
+
+// Backlight configuration
+#define BACKLIGHT_PWM_DRIVER PWMD3
+#define BACKLIGHT_PWM_CHANNEL 2
+#define BACKLIGHT_DEFAULT_LEVEL 6
+
+// Timeout configuration
+#define QUANTUM_PAINTER_DISPLAY_TIMEOUT 10000
+#define LIGHTS_TIMEOUT QUANTUM_PAINTER_DISPLAY_TIMEOUT

keyboards/jpe230/big_knob/gfx/logo.qgf.h

@@ -0,0 +1,11 @@
+// Copyright 2023 jpe230 (@jpe230)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// This file was auto-generated by `qmk painter-convert-graphics -i logo.png -f rgb565`
+
+#pragma once
+
+#include <qp.h>
+
+extern const uint32_t gfx_logo_length;
+extern const uint8_t  gfx_logo[24769];

keyboards/jpe230/big_knob/halconf.h

@@ -0,0 +1,12 @@
+// Copyright 2023 jpe230 (@jpe230)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include_next <halconf.h>
+
+#undef HAL_USE_SPI
+#define HAL_USE_SPI TRUE
+
+#undef HAL_USE_PWM
+#define HAL_USE_PWM TRUE

keyboards/jpe230/big_knob/info.json

@@ -0,0 +1,66 @@
+{
+    "manufacturer": "jpe230",
+    "keyboard_name": "big_knob",
+    "maintainer": "jpe230",
+    "bootloader": "rp2040",
+    "processor": "RP2040",
+    "url": "https://github.com/Jpe230/big_knob",
+    "usb": {
+        "device_version": "1.0.0",
+        "vid": "0xE230",
+        "pid": "0x1337"
+    },
+    "features": {
+        "rgblight": true,
+        "bootmagic": true,
+        "extrakey": true,
+        "mousekey": true,
+        "encoder": true,
+        "backlight": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["GP1"]
+        ]
+    },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "GP2", "pin_b": "GP3"}
+        ]
+    },
+    "backlight": {
+        "pin": "GP7",
+        "levels": 7,
+        "breathing": false
+    },
+    "rgblight": {
+        "driver": "ws2812",
+        "led_count": 10,
+        "max_brightness": 200,
+        "sleep": true,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "snake": true,
+            "knight": true,
+            "christmas": true,
+            "static_gradient": true,
+            "rgb_test": true,
+            "alternating": true,
+            "twinkle": true
+        }
+    },
+    "ws2812": {
+        "pin": "GP0",
+        "driver": "vendor"
+    },
+    "community_layouts": ["ortho_1x1"],
+    "layouts": {
+        "LAYOUT_ortho_1x1": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0}
+            ]
+        }
+    }
+}

keyboards/jpe230/big_knob/keymaps/default/keymap.c

@@ -0,0 +1,16 @@
+// Copyright 2023 jpe230 (@jpe230)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_1x1(
+        KC_MUTE
+    )
+};
+
+#ifdef ENCODER_MAP_ENABLE
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+  [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+};
+#endif

keyboards/jpe230/big_knob/keymaps/default/rules.mk

@@ -0,0 +1 @@
+ENCODER_MAP_ENABLE = yes

keyboards/jpe230/big_knob/keymaps/via/keymap.c

@@ -0,0 +1,16 @@
+// Copyright 2023 jpe230 (@jpe230)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_1x1(
+        KC_MUTE
+    )
+};
+
+#ifdef ENCODER_MAP_ENABLE
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+  [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+};
+#endif

keyboards/jpe230/big_knob/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+ENCODER_MAP_ENABLE = yes
+VIA_ENABLE = yes

keyboards/jpe230/big_knob/mcuconf.h

@@ -0,0 +1,12 @@
+// Copyright 2023 jpe230 (@jpe230)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef RP_SPI_USE_SPI0
+#define RP_SPI_USE_SPI0 TRUE
+
+#undef RP_PWM_USE_PWM3
+#define RP_PWM_USE_PWM3 TRUE

keyboards/jpe230/big_knob/readme.md

@@ -0,0 +1,43 @@
+# Big Knob
+
+![big_knob](https://i.imgur.com/KLS0O7Zh.png)
+
+A 3D printed single encoder volume knob with a SPI Screen.
+
+* Keyboard Maintainer: [jpe230](https://github.com/jpe230)
+* Hardware Supported: Big Knob PCB, Sparkfun ProMicro RP2040 (*See notes*)
+* Hardware Availability: <https://github.com/Jpe230/big_knob>
+## Features
+
+The Big Knob was designed to be easy to assemble:
+* Designed to be used with a RP2040 board (*See notes*)
+* ST7735 0.96 inch color display
+* RGBLight
+* Easy to 3D print
+
+### Notes
+You can use any compatible RP2040 board (I.E.: KB2040, Elite Pi, etc), but you will need to modify the pin definition to match you board
+
+## Flashing
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb jpe230/big_knob -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb jpe230/big_knob -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Building Instructions
+
+You can find the required materials and the instructions to build your own Big Knob in the [project repo](https://github.com/Jpe230/big_knob)
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the encoder buitton and plug in the keyboard
+* **Physical reset button**: Briefly press the reset button on the front of the RP2040 board
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/jpe230/big_knob/rules.mk

@@ -0,0 +1,3 @@
+QUANTUM_PAINTER_ENABLE = yes
+QUANTUM_PAINTER_DRIVERS += st7735_spi
+SRC += gfx/logo.qgf.c