-
Notifications
You must be signed in to change notification settings - Fork 5
Bill of Materials
Pepper Full DIY kit with everything you need for the build are available here: https://shop.bela.io/collections/modular/products/pepper-full-diy-kit.
If you prefer to source your own components then there is Mouser basket for most of the components available here.
This basket contains everything aside from the Thonkicon Mono plugs (PJ398SM), the B100k linear vertical pots, and knobs (all available from Thonk and other retailers), and the USB cables which are only necessary if you want to use the USB breakout (see below).
In addition you will need the Bela starter kit and Pepper PCB and Faceplates.
A full current BOM in spreadsheet format can be found here.
You can also check out our interactive BOM which can be a useful reference for the build.
If you would like to breakout the USB device and host to the provided USB breakout faceplate then we recommend the following type of USB right angle to panel mount breakouts:
- USB host to panel mount: link 1, link 2, link 3
- USB device to panel mount: link 1, link 2, link 3, link 4
NOTE: you probably don't need these
Find it here.
For Rev1 (LEGACY: boards shipped before April 2020 with 2 buttons), the Mouser BOM is here. To this you'll need to add the Thonkiconn jacks, potentiometers and knobs linked above. A full BOM in spreadsheet format can be found here.