Merge pull request #1018 from lorenzncode/sketch-distribute

Sketch distribute fix (#1017)

cadquery/sketch.py

@@ -37,6 +37,7 @@
 
 Modes = Literal["a", "s", "i", "c"]  # add, subtract, intersect, construct
 Point = Union[Vector, Tuple[Real, Real]]
+TOL = 1e-6
 
 T = TypeVar("T", bound="Sketch")
 SketchVal = Union[Shape, Location]
@@ -346,7 +347,7 @@ def parray(self: T, r: Real, a1: Real, da: Real, n: int, rotate: bool = True) ->
 
         locs = []
 
-        if abs(remainder(da, 360)) < 1e-6:
+        if abs(remainder(da, 360)) < TOL:
             angle = da / n
         else:
             angle = da / (n - 1) if n > 1 else a1
@@ -386,16 +387,36 @@ def distribute(
         Distribute locations along selected edges or wires.
         """
 
+        if n < 1:
+            raise ValueError(f"At least 1 element required, requested {n}")
+
         if not self._selection:
             raise ValueError("Nothing selected to distribute over")
 
-        params = [start + i * (stop - start) / n for i in range(n + 1)]
+        if 1 - abs(stop - start) < TOL:
+            trimmed = False
+        else:
+            trimmed = True
+
+        # closed edge or wire parameters
+        params_closed = [start + i * (stop - start) / n for i in range(n)]
+
+        # open or trimmed edge or wire parameters
+        params_open = [
+            start + i * (stop - start) / (n - 1) if n - 1 > 0 else start
+            for i in range(n)
+        ]
 
         locs = []
         for el in self._selection:
             if isinstance(el, (Wire, Edge)):
+                if el.IsClosed() and not trimmed:
+                    params = params_closed
+                else:
+                    params = params_open
+
                 if rotate:
-                    locs.extend(el.locations(params, planar=True))
+                    locs.extend(el.locations(params, planar=True,))
                 else:
                     locs.extend(Location(v) for v in el.positions(params))
             else:

environment.yml

@@ -6,11 +6,12 @@ channels:
 dependencies:
   - python>=3.6
   - ipython
-  - ocp=7.5.1
+  - ocp=7.5.3
   - pyparsing>=2.1.9
   - sphinx=4.4.0
   - sphinx_rtd_theme
   - black=19.10b0
+  - click=8.0.4
   - mypy
   - codecov
   - pytest

tests/test_sketch.py

@@ -83,113 +83,183 @@ def test_modes():
 
 def test_distribute():
 
-    s1 = Sketch().rarray(2, 2, 3, 3).rect(1, 1)
-
-    assert s1._faces.Area() == approx(9)
-    assert len(s1._faces.Faces()) == 9
-
-    s2 = Sketch().parray(2, 0, 90, 3).rect(1, 1)
-
-    assert s2._faces.Area() == approx(3)
-    assert len(s2._faces.Faces()) == 3
+    with raises(ValueError):
+        Sketch().rect(2, 2).faces().distribute(5)
 
     with raises(ValueError):
-        Sketch().rarray(2, 2, 3, 0).rect(1, 1)
+        Sketch().rect(2, 2).distribute(5)
 
     with raises(ValueError):
-        Sketch().parray(2, 0, 90, 0).rect(1, 1)
+        Sketch().circle(1).wires().distribute(0, 0, 1)
 
-    s3 = Sketch().circle(4, mode="c", tag="c").edges(tag="c").distribute(3).rect(1, 1)
+    s1 = Sketch().circle(4, mode="c", tag="c").edges(tag="c").distribute(3)
 
-    assert s2._faces.Area() == approx(3)
-    assert len(s3._faces.Faces()) == 3
-    assert len(s3.reset().vertices("<X")._selection) == 2
+    assert len(s1._selection) == approx(3)
+
+    s1.rect(1, 1)
 
-    for f in s3._faces.Faces():
+    assert s1._faces.Area() == approx(3)
+    assert len(s1._faces.Faces()) == 3
+    assert len(s1.reset().vertices("<X")._selection) == 2
+
+    for f in s1._faces.Faces():
         assert f.Center().Length == approx(4)
 
-    s4 = (
+    s2 = (
         Sketch()
         .circle(4, mode="c", tag="c")
         .edges(tag="c")
         .distribute(3, rotate=False)
         .rect(1, 1)
     )
 
-    assert s4._faces.Area() == approx(3)
-    assert len(s4._faces.Faces()) == 3
-    assert len(s4.reset().vertices("<X")._selection) == 4
+    assert s2._faces.Area() == approx(3)
+    assert len(s2._faces.Faces()) == 3
+    assert len(s2.reset().vertices("<X")._selection) == 4
 
-    for f in s4._faces.Faces():
+    for f in s2._faces.Faces():
         assert f.Center().Length == approx(4)
 
-    with raises(ValueError):
-        Sketch().rect(2, 2).faces().distribute(5)
+    s3 = (
+        Sketch().circle(4, mode="c", tag="c").edges(tag="c").distribute(3, 0.625, 0.875)
+    )
+
+    assert len(s3._selection) == approx(3)
+
+    s3.rect(1, 0.5).reset().vertices("<X")
+
+    assert s3._selection[0].toTuple() == approx(
+        (-3.358757210636101, -3.005203820042827, 0.0)
+    )
+
+    s3.reset().vertices(">X")
+
+    assert s3._selection[0].toTuple() == approx(
+        (3.358757210636101, -3.005203820042827, 0.0)
+    )
+
+    s4 = Sketch().arc((0, 0), 4, 180, 180).edges().distribute(3, 0.25, 0.75)
+
+    assert len(s4._selection) == approx(3)
+
+    s4.rect(1, 0.5).reset().faces("<X").vertices("<X")
+
+    assert s4._selection[0].toTuple() == approx(
+        (-3.358757210636101, -3.005203820042827, 0.0)
+    )
+
+    s4.reset().faces(">X").vertices(">X")
+
+    assert s4._selection[0].toTuple() == approx(
+        (3.358757210636101, -3.005203820042827, 0.0)
+    )
+
+    s5 = (
+        Sketch()
+        .arc((0, 2), 4, 0, 90)
+        .arc((0, -2), 4, 0, -90)
+        .edges()
+        .distribute(4, 0, 1)
+        .circle(0.5)
+    )
+
+    assert len(s5._selection) == approx(8)
+
+    s5.reset().faces(">X").faces(">Y")
+
+    assert s5._selection[0].Center().toTuple() == approx((4.0, 2.0, 0.0))
+
+    s5.reset().faces(">X").faces("<Y")
+
+    assert s5._selection[0].Center().toTuple() == approx((4.0, -2.0, 0.0))
+
+    s5.reset().faces(">Y")
+
+    assert s5._selection[0].Center().toTuple() == approx((0.0, 6.0, 0.0))
+
+
+def test_rarray():
 
     with raises(ValueError):
-        Sketch().rect(2, 2).distribute(5)
+        Sketch().rarray(2, 2, 3, 0).rect(1, 1)
 
-    s5 = Sketch().push([(0, 0), (1, 1)]).rarray(2, 2, 3, 3).rect(0.5, 0.5)
+    s1 = Sketch().rarray(2, 2, 3, 3).rect(1, 1)
 
-    assert s5._faces.Area() == approx(18 * 0.25)
-    assert len(s5._faces.Faces()) == 18
-    assert s5.reset().vertices(">(1,1,0)")._selection[0].toTuple() == approx(
+    assert s1._faces.Area() == approx(9)
+    assert len(s1._faces.Faces()) == 9
+
+    s2 = Sketch().push([(0, 0), (1, 1)]).rarray(2, 2, 3, 3).rect(0.5, 0.5)
+
+    assert s2._faces.Area() == approx(18 * 0.25)
+    assert len(s2._faces.Faces()) == 18
+    assert s2.reset().vertices(">(1,1,0)")._selection[0].toTuple() == approx(
         (3.25, 3.25, 0)
     )
 
-    s6 = Sketch().push([(0, 0), (1, 1)]).parray(2, 0, 90, 3).rect(0.5, 0.5)
 
-    assert s6._faces.Area() == approx(6 * 0.25)
-    assert len(s6._faces.Faces()) == 6
+def test_parray():
 
-    s7 = Sketch().parray(2, 0, 90, 3, False).rect(0.5, 0.5).reset().vertices(">(1,1,0)")
+    with raises(ValueError):
+        Sketch().parray(2, 0, 90, 0).rect(1, 1)
 
-    assert len(s7._selection) == 1
-    assert s7._selection[0].toTuple() == approx(
+    s1 = Sketch().parray(2, 0, 90, 3).rect(1, 1)
+
+    assert s1._faces.Area() == approx(3)
+    assert len(s1._faces.Faces()) == 3
+
+    s2 = Sketch().push([(0, 0), (1, 1)]).parray(2, 0, 90, 3).rect(0.5, 0.5)
+
+    assert s2._faces.Area() == approx(6 * 0.25)
+    assert len(s2._faces.Faces()) == 6
+
+    s3 = Sketch().parray(2, 0, 90, 3, False).rect(0.5, 0.5).reset().vertices(">(1,1,0)")
+
+    assert len(s3._selection) == 1
+    assert s3._selection[0].toTuple() == approx(
         (1.6642135623730951, 1.664213562373095, 0.0)
     )
 
-    s8 = Sketch().push([(0, 0), (0, 1)]).parray(2, 0, 90, 3).rect(0.5, 0.5)
-    s8.reset().faces(">(0,1,0)")
+    s4 = Sketch().push([(0, 0), (0, 1)]).parray(2, 0, 90, 3).rect(0.5, 0.5)
+    s4.reset().faces(">(0,1,0)")
 
-    assert s8._selection[0].Center().Length == approx(3)
+    assert s4._selection[0].Center().Length == approx(3)
 
-    s9 = Sketch().push([(0, 1)], tag="loc")
+    s5 = Sketch().push([(0, 1)], tag="loc")
 
-    assert len(s9._tags["loc"]) == 1
+    assert len(s5._tags["loc"]) == 1
 
-    s10 = Sketch().push([(-4, 1), (0, 0), (4, -1)]).parray(2, 10, 50, 3).rect(1.0, 0.5)
-    s10.reset().vertices(">(-1,0,0)")
+    s6 = Sketch().push([(-4, 1), (0, 0), (4, -1)]).parray(2, 10, 50, 3).rect(1.0, 0.5)
+    s6.reset().vertices(">(-1,0,0)")
 
-    assert s10._selection[0].toTuple() == approx(
+    assert s6._selection[0].toTuple() == approx(
         (-3.46650635094611, 2.424038105676658, 0.0)
     )
 
-    s10.reset().vertices(">(1,0,0)")
+    s6.reset().vertices(">(1,0,0)")
 
-    assert s10._selection[0].toTuple() == approx(
+    assert s6._selection[0].toTuple() == approx(
         (6.505431426947252, -0.8120814940857262, 0.0)
     )
 
-    s11 = Sketch().parray(1, 135, 0, 1).circle(0.1)
-    s11.reset().faces()
+    s7 = Sketch().parray(1, 135, 0, 1).circle(0.1)
+    s7.reset().faces()
 
-    assert len(s11._selection) == 1
-    assert s11._selection[0].Center().toTuple() == approx(
+    assert len(s7._selection) == 1
+    assert s7._selection[0].Center().toTuple() == approx(
         (-0.7071067811865475, 0.7071067811865476, 0.0)
     )
 
-    s12 = Sketch().parray(4, 20, 360, 6).rect(1.0, 0.5)
+    s8 = Sketch().parray(4, 20, 360, 6).rect(1.0, 0.5)
 
-    assert len(s12._faces.Faces()) == 6
+    assert len(s8._faces.Faces()) == 6
 
-    s12.reset().vertices(">(0,-1,0)")
+    s8.reset().vertices(">(0,-1,0)")
 
-    assert s12._selection[0].toTuple() == approx(
+    assert s8._selection[0].toTuple() == approx(
         (-0.5352148612481344, -4.475046932971669, 0.0)
     )
 
-    s13 = (
+    s9 = (
         Sketch()
         .push([(-4, 1)])
         .circle(0.1)
@@ -199,11 +269,11 @@ def test_distribute():
         .rect(1.0, 0.5, 40, "a", "rects")
     )
 
-    assert len(s13._faces.Faces()) == 4
+    assert len(s9._faces.Faces()) == 4
 
-    s13.reset().vertices(">(-1,0,0)", tag="rects")
+    s9.reset().vertices(">(-1,0,0)", tag="rects")
 
-    assert s13._selection[0].toTuple() == approx(
+    assert s9._selection[0].toTuple() == approx(
         (-3.3330260270865173, 3.1810426396582487, 0.0)
     )