danger_options: adc ignore limit values

README.md

@@ -54,12 +54,16 @@ If I want my printer to light itself on fire, I should be able to make my printe
 
 - [danger_options: option to configure the homing elapsed distance tolerance](https://github.com/DangerKlippers/danger-klipper/pull/110)
 
+- [danger_options: option to ignore ADC out of range](https://github.com/DangerKlippers/danger-klipper/pull/129)
+
 - [temperature_mcu: add reference_voltage](https://github.com/DangerKlippers/danger-klipper/pull/99) ([klipper#5713](https://github.com/Klipper3d/klipper/pull/5713))
 
 - [stepper: current_change_dwell_time](https://github.com/DangerKlippers/danger-klipper/pull/90)
 
 - [homing: min_home_dist](https://github.com/DangerKlippers/danger-klipper/pull/90)
 
+- [adxl345: improve ACCELEROMETER_QUERY command](https://github.com/DangerKlippers/danger-klipper/pull/124)
+
 If you're feeling adventurous, take a peek at the extra features in the bleeding-edge branch:
 
 - [dmbutyugin's advanced-features branch](https://github.com/DangerKlippers/danger-klipper/pull/69) [dmbutyugin/advanced-features](https://github.com/dmbutyugin/klipper/commits/advanced-features)
@@ -74,8 +78,6 @@ If you're feeling adventurous, take a peek at the extra features in the bleeding
 
 - [input_shaper: new print_ringing_tower utility](https://github.com/DangerKlippers/danger-klipper/pull/69)
 
-- [adxl345: improve ACCELEROMETER_QUERY command](https://github.com/DangerKlippers/danger-klipper/pull/124)
-
 ## Switch to Danger Klipper
 
 > [!NOTE]

docs/Config_Reference.md

@@ -110,6 +110,11 @@ A collection of DangerKlipper-specific system options
 #   Tolerance (in mm) for distance moved in the second homing. Ensures the
 #   second homing distance closely matches the `min_home_dist` when using
 #   sensorless homing. The default is 0.5mm.
+#adc_ignore_limits: False
+#   When set to true, this parameter ignores the min_value and max_value
+#   limits for ADC temperature sensors. It prevents shutdowns due to
+#   'ADC out of range' errors by allowing readings outside the specified
+#   range without triggering a shutdown. Default is False.
 ```
 
 ## Common kinematic settings

klippy/extras/adc_temperature.py

@@ -15,6 +15,7 @@
 REPORT_TIME = 0.300
 RANGE_CHECK_COUNT = 4
 
+
 # Interface between ADC and heater temperature callbacks
 class PrinterADCtoTemperature:
     def __init__(self, config, adc_convert):
@@ -24,6 +25,9 @@ def __init__(self, config, adc_convert):
         self.mcu_adc.setup_adc_callback(REPORT_TIME, self.adc_callback)
         query_adc = config.get_printer().load_object(config, "query_adc")
         query_adc.register_adc(config.get_name(), self.mcu_adc)
+        self.danger_options = config.get_printer().lookup_object(
+            "danger_options"
+        )
 
     def setup_callback(self, temperature_callback):
         self.temperature_callback = temperature_callback
@@ -36,20 +40,27 @@ def adc_callback(self, read_time, read_value):
         self.temperature_callback(read_time + SAMPLE_COUNT * SAMPLE_TIME, temp)
 
     def setup_minmax(self, min_temp, max_temp):
+        if self.danger_options.adc_ignore_limits:
+            danger_check_count = 0
+        else:
+            danger_check_count = RANGE_CHECK_COUNT
+
         adc_range = [self.adc_convert.calc_adc(t) for t in [min_temp, max_temp]]
+
         self.mcu_adc.setup_minmax(
             SAMPLE_TIME,
             SAMPLE_COUNT,
             minval=min(adc_range),
             maxval=max(adc_range),
-            range_check_count=RANGE_CHECK_COUNT,
+            range_check_count=danger_check_count,
         )
 
 
 ######################################################################
 # Linear interpolation
 ######################################################################
 
+
 # Helper code to perform linear interpolation
 class LinearInterpolate:
     def __init__(self, samples):
@@ -98,6 +109,7 @@ def reverse_interpolate(self, value):
 # Linear voltage to temperature converter
 ######################################################################
 
+
 # Linear style conversion chips calibrated from temperature measurements
 class LinearVoltage:
     def __init__(self, config, params):
@@ -146,6 +158,7 @@ def create(self, config):
 # Linear resistance to temperature converter
 ######################################################################
 
+
 # Linear resistance calibrated from temperature measurements
 class LinearResistance:
     def __init__(self, config, samples):

klippy/extras/danger_options.py

@@ -22,6 +22,7 @@ def __init__(self, config):
         self.homing_elapsed_distance_tolerance = config.getfloat(
             "homing_elapsed_distance_tolerance", 0.5, minval=0.0
         )
+        self.adc_ignore_limits = config.getboolean("adc_ignore_limits", False)
 
 
 def load_config(config):

src/adccmds.c

@@ -43,13 +43,15 @@ analog_in_event(struct timer *timer)
         a->timer.waketime += a->sample_time;
         return SF_RESCHEDULE;
     }
-    if (likely(a->value >= a->min_value && a->value <= a->max_value)) {
-        a->invalid_count = 0;
-    } else {
-        a->invalid_count++;
-        if (a->invalid_count >= a->range_check_count) {
-            try_shutdown("ADC out of range");
+    if (a->range_check_count > 0) {
+        if (likely(a->value >= a->min_value && a->value <= a->max_value)) {
             a->invalid_count = 0;
+        } else {
+            a->invalid_count++;
+            if (a->invalid_count >= a->range_check_count) {
+                try_shutdown("ADC out of range");
+                a->invalid_count = 0;
+            }
         }
     }
     sched_wake_task(&analog_wake);

test/klippy/danger_options.cfg

@@ -8,6 +8,7 @@ log_bed_mesh_at_startup: False
 log_shutdown_info: False
 allow_plugin_override: True
 multi_mcu_trsync_timeout: 0.05
+adc_ignore_limits: True
 
 [stepper_x]
 step_pin: PF0