4.9 2.3.x imx #40
Merged
4.9 2.3.x imx #40
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit db68ce1 upstream. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [only take the include/linux/uaccess.h portion - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c01db7 upstream. When a UHID_CREATE command is written to the uhid char device, a copy_from_user() is done from a user pointer embedded in the command. When the address limit is KERNEL_DS, e.g. as is the case during sys_sendfile(), this can read from kernel memory. Alternatively, information can be leaked from a setuid binary that is tricked to write to the file descriptor. Therefore, forbid UHID_CREATE in these cases. No other commands in uhid_char_write() are affected by this bug and UHID_CREATE is marked as "obsolete", so apply the restriction to UHID_CREATE only rather than to uhid_char_write() entirely. Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to Jann Horn for commit 9da3f2b ("x86/fault: BUG() when uaccess helpers fault on kernel addresses"), allowing this bug to be found. Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com Fixes: d365c6c ("HID: uhid: add UHID_CREATE and UHID_DESTROY events") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e241f6 upstream. skb_can_coalesce() allows coalescing neighboring slab objects into a single frag: return page == skb_frag_page(frag) && off == frag->page_offset + skb_frag_size(frag); ceph_tcp_sendpage() can be handed slab pages. One example of this is XFS: it passes down sector sized slab objects for its metadata I/O. If the kernel client is co-located on the OSD node, the skb may go through loopback and pop on the receive side with the exact same set of frags. When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy complains because the size exceeds the object's allocated size: usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes) Although skb_can_coalesce() could be taught to return false if the resulting frag would cross a slab object boundary, we already have a fallback for non-refcounted pages. Utilize it for slab pages too. Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22454b7 upstream. This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset only if a device is was attached to the hub port before resetting the hub port. Using a Lenovo T480s attached to the ultra dock it was not possible to detect some usb-c devices at the dock usb-c ports because the hub_port_reset code will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset. Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit. This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the new device was attached such that it was not detected. This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is currently no device attached to the port before the hub port reset. This will avoid clearing the connection bit for new attached devices. Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08fd9a8 upstream. If dwc3_core_init_mode() fails with deferred probe, next probe fails on sysfs with sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/dwc3.0.auto.ulpi' To avoid this failure, clean up ULPI device. Cc: <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5baeae upstream. This definition is used by msecs_to_jiffies in milliseconds. According to the comments, max rexit timeout should be 20ms. Align with the comments to properly calculate the delay. Verified on Sunrise Point-LP and Cannon Lake. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb5d219 upstream. Sasha has somehow been convinced into helping me with the stable kernel maintenance. Codify this slip in good judgement before he realizes what he really signed up for :) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…r path commit a05a140 upstream. The change corrects the error path in gpiochip_add_data_with_key() by avoiding to call ida_simple_remove(), if ida_simple_get() returns an error. Note that ida_simple_remove()/ida_free() throws a BUG(), if id argument is negative, it allows to easily check the correctness of the fix by fuzzing the return value from ida_simple_get(). Fixes: ff2b135 ("gpio: make the gpiochip a real device") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec484d0 upstream. The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef92 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82715ac upstream. When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1fe6ad upstream. Driver can report IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ so it's important to provide valid & complete info about supported bands for each channel. By default no support for 160 MHz should be assumed unless firmware reports it for a given channel later. This fixes info passed to the userspace. Without that change userspace could try to use invalid channel and fail to start an interface. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9de9aa4 upstream. Rename duplicate sysfs_read_file into cpupower_read_sysfs and fix linking. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Thomas Renninger <trenn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81c9908 upstream. p9stat_read will call p9stat_free on error, we should only free the struct content on success. There also is no need to "p9stat_init" st as the read function will zero the whole struct for us anyway, so clean up the code a bit while we are here. Link: http://lkml.kernel.org/r/1535410108-20650-1-git-send-email-asmadeus@codewreck.org Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr> Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4458bba upstream. syzbot is hitting warning at str_read() [1] because len parameter can become larger than KMALLOC_MAX_SIZE. We don't need to emit warning for this case. [1] https://syzkaller.appspot.com/bug?id=7f2f5aad79ea8663c296a2eedb81978401a908f0 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+ac488b9811036cea7ea0@syzkaller.appspotmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f2df09 upstream. syzbot is reporting too large memory allocation at bfs_fill_super() [1]. Since file system image is corrupted such that bfs_sb->s_start == 0, bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and printf(). [1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96 Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…_rm_peer commit df132ef upstream. If a transport is removed by asconf but there still are some chunks with this transport queuing on out_chunk_list, later an use-after-free issue will be caused when accessing this transport from these chunks in sctp_outq_flush(). This is an old bug, we fix it by clearing the transport of these chunks in out_chunk_list when removing a transport in sctp_assoc_rm_peer(). Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c62bd9 upstream. When alloc_percpu() fails, sdp gets freed but sb->s_fs_info still points to the same address. Move the assignment after that error check so that s_fs_info can only point to a valid sdp or NULL, which is checked for later in the error path, in gfs2_kill_super(). Reported-by: syzbot+dcb8b3587445007f5808@syzkaller.appspotmail.com Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 604d415 upstream. syzkaller triggered a use-after-free [1], caused by a combination of skb_get() in llc_conn_state_process() and usage of sk_eat_skb() sk_eat_skb() is assuming the skb about to be freed is only used by the current thread. TCP/DCCP stacks enforce this because current thread holds the socket lock. llc_conn_state_process() wants to make sure skb does not disappear, and holds a reference on the skb it manipulates. But as soon as this skb is added to socket receive queue, another thread can consume it. This means that llc must use regular skb_unlink() and kfree_skb() so that both producer and consumer can safely work on the same skb. [1] BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] BUG: KASAN: use-after-free in refcount_read include/linux/refcount.h:43 [inline] BUG: KASAN: use-after-free in skb_unref include/linux/skbuff.h:967 [inline] BUG: KASAN: use-after-free in kfree_skb+0xb7/0x580 net/core/skbuff.c:655 Read of size 4 at addr ffff8801d1f6fba4 by task ksoftirqd/1/18 CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.19.0-rc8+ Freescale#295 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c4/0x2b6 lib/dump_stack.c:113 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] refcount_read include/linux/refcount.h:43 [inline] skb_unref include/linux/skbuff.h:967 [inline] kfree_skb+0xb7/0x580 net/core/skbuff.c:655 llc_sap_state_process+0x9b/0x550 net/llc/llc_sap.c:224 llc_sap_rcv+0x156/0x1f0 net/llc/llc_sap.c:297 llc_sap_handler+0x65e/0xf80 net/llc/llc_sap.c:438 llc_rcv+0x79e/0xe20 net/llc/llc_input.c:208 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023 process_backlog+0x218/0x6f0 net/core/dev.c:5829 napi_poll net/core/dev.c:6249 [inline] net_rx_action+0x7c5/0x1950 net/core/dev.c:6315 __do_softirq+0x30c/0xb03 kernel/softirq.c:292 run_ksoftirqd+0x94/0x100 kernel/softirq.c:653 smpboot_thread_fn+0x68b/0xa00 kernel/smpboot.c:164 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413 Allocated by task 18: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc_node+0x144/0x730 mm/slab.c:3644 __alloc_skb+0x119/0x770 net/core/skbuff.c:193 alloc_skb include/linux/skbuff.h:995 [inline] llc_alloc_frame+0xbc/0x370 net/llc/llc_sap.c:54 llc_station_ac_send_xid_r net/llc/llc_station.c:52 [inline] llc_station_rcv+0x1dc/0x1420 net/llc/llc_station.c:111 llc_rcv+0xc32/0xe20 net/llc/llc_input.c:220 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023 process_backlog+0x218/0x6f0 net/core/dev.c:5829 napi_poll net/core/dev.c:6249 [inline] net_rx_action+0x7c5/0x1950 net/core/dev.c:6315 __do_softirq+0x30c/0xb03 kernel/softirq.c:292 Freed by task 16383: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x83/0x290 mm/slab.c:3756 kfree_skbmem+0x154/0x230 net/core/skbuff.c:582 __kfree_skb+0x1d/0x20 net/core/skbuff.c:642 sk_eat_skb include/net/sock.h:2366 [inline] llc_ui_recvmsg+0xec2/0x1610 net/llc/af_llc.c:882 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0xd0/0x110 net/socket.c:801 ___sys_recvmsg+0x2b6/0x680 net/socket.c:2278 __sys_recvmmsg+0x303/0xb90 net/socket.c:2390 do_sys_recvmmsg+0x181/0x1a0 net/socket.c:2466 __do_sys_recvmmsg net/socket.c:2484 [inline] __se_sys_recvmmsg net/socket.c:2480 [inline] __x64_sys_recvmmsg+0xbe/0x150 net/socket.c:2480 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801d1f6fac0 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 228 bytes inside of 232-byte region [ffff8801d1f6fac0, ffff8801d1f6fba8) The buggy address belongs to the page: page:ffffea000747dbc0 count:1 mapcount:0 mapping:ffff8801d9be7680 index:0xffff8801d1f6fe80 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0007346e88 ffffea000705b108 ffff8801d9be7680 raw: ffff8801d1f6fe80 ffff8801d1f6f0c0 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d1f6fa80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801d1f6fb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801d1f6fb80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc ^ ffff8801d1f6fc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801d1f6fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6144847 upstream. Slub does not call kmalloc_slab() for sizes > KMALLOC_MAX_CACHE_SIZE, instead it falls back to kmalloc_large(). For slab KMALLOC_MAX_CACHE_SIZE == KMALLOC_MAX_SIZE and it calls kmalloc_slab() for all allocations relying on NULL return value for over-sized allocations. This inconsistency leads to unwanted warnings from kmalloc_slab() for over-sized allocations for slab. Returning NULL for failed allocations is the expected behavior. Make slub and slab code consistent by checking size > KMALLOC_MAX_CACHE_SIZE in slab before calling kmalloc_slab(). While we are here also fix the check in kmalloc_slab(). We should check against KMALLOC_MAX_CACHE_SIZE rather than KMALLOC_MAX_SIZE. It all kinda worked because for slab the constants are the same, and slub always checks the size against KMALLOC_MAX_CACHE_SIZE before kmalloc_slab(). But if we get there with size > KMALLOC_MAX_CACHE_SIZE anyhow bad things will happen. For example, in case of a newly introduced bug in slub code. Also move the check in kmalloc_slab() from function entry to the size > 192 case. This partially compensates for the additional check in slab code and makes slub code a bit faster (at least theoretically). Also drop __GFP_NOWARN in the warning check. This warning means a bug in slab code itself, user-passed flags have nothing to do with it. Nothing of this affects slob. Link: http://lkml.kernel.org/r/20180927171502.226522-1-dvyukov@gmail.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+87829a10073277282ad1@syzkaller.appspotmail.com Reported-by: syzbot+ef4e8fc3a06e9019bb40@syzkaller.appspotmail.com Reported-by: syzbot+6e438f4036df52cbb863@syzkaller.appspotmail.com Reported-by: syzbot+8574471d8734457d98aa@syzkaller.appspotmail.com Reported-by: syzbot+af1504df0807a083dbd9@syzkaller.appspotmail.com Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a37bd8 upstream. The value of pitches is not correct while calling mode_set. The issue we found so far on following system: - Debian8 with XFCE Desktop - Ubuntu with KDE Desktop - SUSE15 with KDE Desktop Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Cc: <stable@vger.kernel.org> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7989b9e upstream. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Cc: <stable@vger.kernel.org> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5478ad1 upstream. If vesafb attaches to the AST device, it configures the framebuffer memory for uncached access by default. When ast.ko later tries to attach itself to the device, it wants to use write-combining on the framebuffer memory, but vesefb's existing configuration for uncached access takes precedence. This results in reduced performance. Removing the framebuffer's configuration before loding the AST driver fixes the problem. Other DRM drivers already contain equivalent code. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> Tested-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…t_echo_skb() commit a4310fa upstream. This patch factors out all non sending parts of can_get_echo_skb() into a seperate function __can_get_echo_skb(), so that it can be re-used in an upcoming patch. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…me to access frame length commit 200f5c4 upstream. This patch replaces the use of "struct can_frame::can_dlc" by "struct canfd_frame::len" to access the frame's length. As it is ensured that both structures have a compatible memory layout for this member this is no functional change. Futher, this compatibility is documented in a comment. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…cho_skb is accessed out of bounds commit e7a6994 upstream. If the "struct can_priv::echo_skb" is accessed out of bounds would lead to a kernel crash. Better print a sensible warning message instead and try to recover. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…o non existing skb commit 7da11ba upstream. Prior to echoing a successfully transmitted CAN frame (by calling can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling can_put_echo_skb() in the transmit function). These put and get function take an index as parameter, which is used to identify the CAN frame. A driver calling can_get_echo_skb() with a index not pointing to a skb is a BUG, so add an appropriate error message. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6f9bc3 upstream. Build with the latest patches resulted in panic: 11384.486289] BUG: unable to handle kernel NULL pointer dereference at (null) [11384.486293] IP: (null) [11384.486295] PGD 0 [11384.486295] P4D 0 [11384.486296] [11384.486299] Oops: 0010 [Freescale#1] SMP ......... snip ...... [11384.486401] CPU: 0 PID: 968 Comm: kworker/0:1H Tainted: G W O 4.13.0-a-stream-20170825 Freescale#1 [11384.486402] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015 [11384.486418] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] [11384.486419] task: ffff880850579680 task.stack: ffffc90007fec000 [11384.486420] RIP: 0010: (null) [11384.486420] RSP: 0018:ffffc90007fef970 EFLAGS: 00010206 [11384.486421] RAX: ffff88084cfe8000 RBX: ffff88084dce4000 RCX: ffffc90007fef978 [11384.486422] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88084cfe8000 [11384.486422] RBP: ffffc90007fefab0 R08: 0000000000000000 R09: ffff88084dce4080 [11384.486423] R10: ffffffffa02d7f60 R11: 0000000000000000 R12: ffff88105af65a00 [11384.486423] R13: ffff88084dce4000 R14: 000000000000c000 R15: 000000000000c000 [11384.486424] FS: 0000000000000000(0000) GS:ffff88085f400000(0000) knlGS:0000000000000000 [11384.486425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11384.486425] CR2: 0000000000000000 CR3: 0000000001c09000 CR4: 00000000001406f0 [11384.486426] Call Trace: [11384.486431] ? is_valid_mcast_lid.isra.21+0xfb/0x110 [ib_core] [11384.486436] ib_attach_mcast+0x6f/0xa0 [ib_core] [11384.486441] ipoib_mcast_attach+0x81/0x190 [ib_ipoib] [11384.486443] ipoib_mcast_join_complete+0x354/0xb40 [ib_ipoib] [11384.486448] mcast_work_handler+0x330/0x6c0 [ib_core] [11384.486452] join_handler+0x101/0x220 [ib_core] [11384.486455] ib_sa_mcmember_rec_callback+0x54/0x80 [ib_core] [11384.486459] recv_handler+0x3a/0x60 [ib_core] [11384.486462] ib_mad_recv_done+0x423/0x9b0 [ib_core] [11384.486466] __ib_process_cq+0x5d/0xb0 [ib_core] [11384.486469] ib_cq_poll_work+0x20/0x60 [ib_core] [11384.486472] process_one_work+0x149/0x360 [11384.486474] worker_thread+0x4d/0x3c0 [11384.486487] kthread+0x109/0x140 [11384.486488] ? rescuer_thread+0x380/0x380 [11384.486489] ? kthread_park+0x60/0x60 [11384.486490] ? kthread_park+0x60/0x60 [11384.486493] ret_from_fork+0x25/0x30 [11384.486493] Code: Bad RIP value. [11384.486493] Code: Bad RIP value. [11384.486496] RIP: (null) RSP: ffffc90007fef970 [11384.486497] CR2: 0000000000000000 [11384.486531] ---[ end trace b1acec6fb4ff6e75 ]--- [11384.532133] Kernel panic - not syncing: Fatal exception [11384.536541] Kernel Offset: disabled [11384.969491] ---[ end Kernel panic - not syncing: Fatal exception [11384.976875] sched: Unexpected reschedule of offline CPU#1! [11384.983646] ------------[ cut here ]------------ Rdma device driver may not have implemented (*get_link_layer)() so it can not be called directly. Should use appropriate helper function. Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Fixes: 5236333 ("IB/core: Fix the validations of a multicast LID in attach or detach operations") Cc: stable@kernel.org # 4.13 Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0e0cb8 upstream. pq_update() can only be called in two places: from the completion function when the complete (npkts) sequence of packets has been submitted and processed, or from setup function if a subset of the packets were submitted (i.e. the error path). Currently both paths can call pq_update() if an error occurrs. This race will cause the n_req value to go negative, hanging file_close(), or cause a crash by freeing the txlist more than once. Several variables are used to determine SDMA send state. Most of these are unnecessary, and have code inspectible races between the setup function and the completion function, in both the send path and the error path. The request 'status' value can be set by the setup or by the completion function. This is code inspectibly racy. Since the status is not needed in the completion code or by the caller it has been removed. The request 'done' value races between usage by the setup and the completion function. The completion function does not need this. When the number of processed packets matches npkts, it is done. The 'has_error' value races between usage of the setup and the completion function. This can cause incorrect error handling and leave the n_req in an incorrect value (i.e. negative). Simplify the code by removing all of the unneeded state checks and variables. Clean up iovs node when it is freed. Eliminate race conditions in the error path: If all packets are submitted, the completion handler will set the completion status correctly (ok or aborted). If all packets are not submitted, the caller must wait until the submitted packets have completed, and then set the completion status. These two change eliminate the race condition in the error path. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ate is detected commit 2f31a67 upstream. USB3 roothub might autosuspend before a plugged USB3 device is detected, causing USB3 device enumeration failure. USB3 devices don't show up as connected and enabled until USB3 link trainig completes. On a fast booting platform with a slow USB3 link training the link might reach the connected enabled state just as the bus is suspending. If this device is discovered first time by the xhci_bus_suspend() routine it will be put to U3 suspended state like the other ports which failed to suspend earlier. The hub thread will notice the connect change and resume the bus, moving the port back to U0 This U0 -> U3 -> U0 transition right after being connected seems to be too much for some devices, causing them to first go to SS.Inactive state, and finally end up stuck in a polling state with reset asserted Fix this by failing the bus suspend if a port has a connect change or is in a polling state in xhci_bus_suspend(). Don't do any port changes until all ports are checked, buffer all port changes and only write them in the end if suspend can proceed Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89d13c3 upstream. This patch fixes missing up_read call. Fixes: c9b6078 ("f2fs: fix to do sanity check with block address in main area") Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91291e9 upstream. This patch adds f2fs_is_valid_blkaddr() in below functions to do sanity check with block address to avoid pentential panic: - f2fs_grab_read_bio() - __written_first_block() https://bugzilla.kernel.org/show_bug.cgi?id=200465 - Reproduce - POC (poc.c) #define _GNU_SOURCE #include <sys/types.h> #include <sys/mount.h> #include <sys/mman.h> #include <sys/stat.h> #include <sys/xattr.h> #include <dirent.h> #include <errno.h> #include <error.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <linux/falloc.h> #include <linux/loop.h> static void activity(char *mpoint) { char *xattr; int err; err = asprintf(&xattr, "%s/foo/bar/xattr", mpoint); char buf2[113]; memset(buf2, 0, sizeof(buf2)); listxattr(xattr, buf2, sizeof(buf2)); } int main(int argc, char *argv[]) { activity(argv[1]); return 0; } - kernel message [ 844.718738] F2FS-fs (loop0): Mounted with checkpoint version = 2 [ 846.430929] F2FS-fs (loop0): access invalid blkaddr:1024 [ 846.431058] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.431059] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.431310] CPU: 1 PID: 1249 Comm: a.out Not tainted 4.18.0-rc3+ Freescale#1 [ 846.431312] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.431315] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.431316] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00 [ 846.431347] RSP: 0018:ffff961c414a7bc0 EFLAGS: 00010282 [ 846.431349] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000000 [ 846.431350] RDX: 0000000000000000 RSI: ffff89dfffd165d8 RDI: ffff89dfffd165d8 [ 846.431351] RBP: ffff961c414a7c20 R08: 0000000000000001 R09: 0000000000000248 [ 846.431353] R10: 0000000000000000 R11: 0000000000000248 R12: 0000000000000007 [ 846.431369] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0 [ 846.431372] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.431373] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.431374] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.431384] Call Trace: [ 846.431426] f2fs_iget+0x6f4/0xe70 [ 846.431430] ? f2fs_find_entry+0x71/0x90 [ 846.431432] f2fs_lookup+0x1aa/0x390 [ 846.431452] __lookup_slow+0x97/0x150 [ 846.431459] lookup_slow+0x35/0x50 [ 846.431462] walk_component+0x1c6/0x470 [ 846.431479] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.431488] ? page_add_file_rmap+0x13/0x200 [ 846.431491] path_lookupat+0x76/0x230 [ 846.431501] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.431504] filename_lookup+0xb8/0x1a0 [ 846.431534] ? _cond_resched+0x16/0x40 [ 846.431541] ? kmem_cache_alloc+0x160/0x1d0 [ 846.431549] ? path_listxattr+0x41/0xa0 [ 846.431551] path_listxattr+0x41/0xa0 [ 846.431570] do_syscall_64+0x55/0x100 [ 846.431583] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.431607] RIP: 0033:0x7f882de1c0d7 [ 846.431607] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.431639] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.431641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.431642] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.431643] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.431645] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.431646] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.431648] ---[ end trace abca54df39d14f5c ]--- [ 846.431651] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix. [ 846.431762] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_iget+0xd17/0xe70 [ 846.431763] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.431797] CPU: 1 PID: 1249 Comm: a.out Tainted: G W 4.18.0-rc3+ Freescale#1 [ 846.431798] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.431800] RIP: 0010:f2fs_iget+0xd17/0xe70 [ 846.431801] Code: ff ff 48 63 d8 e9 e1 f6 ff ff 48 8b 45 c8 41 b8 05 00 00 00 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b 48 8b 38 e8 f9 b4 00 00 <0f> 0b 48 8b 45 c8 f0 80 48 48 04 e9 d8 f9 ff ff 0f 0b 48 8b 43 18 [ 846.431832] RSP: 0018:ffff961c414a7bd0 EFLAGS: 00010282 [ 846.431834] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000006 [ 846.431835] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0 [ 846.431836] RBP: ffff961c414a7c20 R08: 0000000000000000 R09: 0000000000000273 [ 846.431837] R10: 0000000000000000 R11: ffff89dfad50ca60 R12: 0000000000000007 [ 846.431838] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0 [ 846.431840] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.431841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.431842] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.431846] Call Trace: [ 846.431850] ? f2fs_find_entry+0x71/0x90 [ 846.431853] f2fs_lookup+0x1aa/0x390 [ 846.431856] __lookup_slow+0x97/0x150 [ 846.431858] lookup_slow+0x35/0x50 [ 846.431874] walk_component+0x1c6/0x470 [ 846.431878] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.431880] ? page_add_file_rmap+0x13/0x200 [ 846.431882] path_lookupat+0x76/0x230 [ 846.431884] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.431886] filename_lookup+0xb8/0x1a0 [ 846.431890] ? _cond_resched+0x16/0x40 [ 846.431891] ? kmem_cache_alloc+0x160/0x1d0 [ 846.431894] ? path_listxattr+0x41/0xa0 [ 846.431896] path_listxattr+0x41/0xa0 [ 846.431898] do_syscall_64+0x55/0x100 [ 846.431901] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.431902] RIP: 0033:0x7f882de1c0d7 [ 846.431903] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.431934] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.431936] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.431937] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.431939] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.431940] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.431941] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.431943] ---[ end trace abca54df39d14f5d ]--- [ 846.432033] F2FS-fs (loop0): access invalid blkaddr:1024 [ 846.432051] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.432051] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.432085] CPU: 1 PID: 1249 Comm: a.out Tainted: G W 4.18.0-rc3+ Freescale#1 [ 846.432086] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.432089] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160 [ 846.432089] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00 [ 846.432120] RSP: 0018:ffff961c414a7900 EFLAGS: 00010286 [ 846.432122] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006 [ 846.432123] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0 [ 846.432124] RBP: ffff89dff5492800 R08: 0000000000000001 R09: 000000000000029d [ 846.432125] R10: ffff961c414a7820 R11: 000000000000029d R12: 0000000000000400 [ 846.432126] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000 [ 846.432128] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.432130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.432131] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.432135] Call Trace: [ 846.432151] f2fs_wait_on_block_writeback+0x20/0x110 [ 846.432158] f2fs_grab_read_bio+0xbc/0xe0 [ 846.432161] f2fs_submit_page_read+0x21/0x280 [ 846.432163] f2fs_get_read_data_page+0xb7/0x3c0 [ 846.432165] f2fs_get_lock_data_page+0x29/0x1e0 [ 846.432167] f2fs_get_new_data_page+0x148/0x550 [ 846.432170] f2fs_add_regular_entry+0x1d2/0x550 [ 846.432178] ? __switch_to+0x12f/0x460 [ 846.432181] f2fs_add_dentry+0x6a/0xd0 [ 846.432184] f2fs_do_add_link+0xe9/0x140 [ 846.432186] __recover_dot_dentries+0x260/0x280 [ 846.432189] f2fs_lookup+0x343/0x390 [ 846.432193] __lookup_slow+0x97/0x150 [ 846.432195] lookup_slow+0x35/0x50 [ 846.432208] walk_component+0x1c6/0x470 [ 846.432212] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.432215] ? page_add_file_rmap+0x13/0x200 [ 846.432217] path_lookupat+0x76/0x230 [ 846.432219] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.432221] filename_lookup+0xb8/0x1a0 [ 846.432224] ? _cond_resched+0x16/0x40 [ 846.432226] ? kmem_cache_alloc+0x160/0x1d0 [ 846.432228] ? path_listxattr+0x41/0xa0 [ 846.432230] path_listxattr+0x41/0xa0 [ 846.432233] do_syscall_64+0x55/0x100 [ 846.432235] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.432237] RIP: 0033:0x7f882de1c0d7 [ 846.432237] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.432269] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.432271] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.432272] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.432273] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.432274] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.432275] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.432277] ---[ end trace abca54df39d14f5e ]--- [ 846.432279] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix. [ 846.432376] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_wait_on_block_writeback+0xb1/0x110 [ 846.432376] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.432410] CPU: 1 PID: 1249 Comm: a.out Tainted: G W 4.18.0-rc3+ Freescale#1 [ 846.432411] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.432413] RIP: 0010:f2fs_wait_on_block_writeback+0xb1/0x110 [ 846.432414] Code: 66 90 f0 ff 4b 34 74 59 5b 5d c3 48 8b 7d 00 41 b8 05 00 00 00 89 d9 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b e8 df bc fd ff <0f> 0b f0 80 4d 48 04 e9 67 ff ff ff 48 8b 03 48 c1 e8 37 83 e0 07 [ 846.432445] RSP: 0018:ffff961c414a7910 EFLAGS: 00010286 [ 846.432447] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006 [ 846.432448] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff89dfffd165d0 [ 846.432449] RBP: ffff89dff5492800 R08: 0000000000000000 R09: 00000000000002d1 [ 846.432450] R10: ffff961c414a7820 R11: ffff89dfad50cf80 R12: 0000000000000400 [ 846.432451] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000 [ 846.432453] FS: 00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000 [ 846.432454] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.432455] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0 [ 846.432459] Call Trace: [ 846.432463] f2fs_grab_read_bio+0xbc/0xe0 [ 846.432464] f2fs_submit_page_read+0x21/0x280 [ 846.432466] f2fs_get_read_data_page+0xb7/0x3c0 [ 846.432468] f2fs_get_lock_data_page+0x29/0x1e0 [ 846.432470] f2fs_get_new_data_page+0x148/0x550 [ 846.432473] f2fs_add_regular_entry+0x1d2/0x550 [ 846.432475] ? __switch_to+0x12f/0x460 [ 846.432477] f2fs_add_dentry+0x6a/0xd0 [ 846.432480] f2fs_do_add_link+0xe9/0x140 [ 846.432483] __recover_dot_dentries+0x260/0x280 [ 846.432485] f2fs_lookup+0x343/0x390 [ 846.432488] __lookup_slow+0x97/0x150 [ 846.432490] lookup_slow+0x35/0x50 [ 846.432505] walk_component+0x1c6/0x470 [ 846.432509] ? memcg_kmem_charge_memcg+0x70/0x90 [ 846.432511] ? page_add_file_rmap+0x13/0x200 [ 846.432513] path_lookupat+0x76/0x230 [ 846.432515] ? __alloc_pages_nodemask+0xfc/0x280 [ 846.432517] filename_lookup+0xb8/0x1a0 [ 846.432520] ? _cond_resched+0x16/0x40 [ 846.432522] ? kmem_cache_alloc+0x160/0x1d0 [ 846.432525] ? path_listxattr+0x41/0xa0 [ 846.432526] path_listxattr+0x41/0xa0 [ 846.432529] do_syscall_64+0x55/0x100 [ 846.432531] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 846.432533] RIP: 0033:0x7f882de1c0d7 [ 846.432533] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48 [ 846.432565] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2 [ 846.432567] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7 [ 846.432568] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0 [ 846.432569] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000 [ 846.432570] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550 [ 846.432571] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000 [ 846.432573] ---[ end trace abca54df39d14f5f ]--- [ 846.434280] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 846.434424] PGD 80000001ebd3a067 P4D 80000001ebd3a067 PUD 1eb1ae067 PMD 0 [ 846.434551] Oops: 0000 [Freescale#1] SMP PTI [ 846.434697] CPU: 0 PID: 44 Comm: kworker/u5:0 Tainted: G W 4.18.0-rc3+ Freescale#1 [ 846.434805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 846.435000] Workqueue: fscrypt_read_queue decrypt_work [ 846.435174] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0 [ 846.435351] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24 [ 846.435696] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206 [ 846.435870] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80 [ 846.436051] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8 [ 846.436261] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000 [ 846.436433] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80 [ 846.436562] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60 [ 846.436658] FS: 0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000 [ 846.436758] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.436898] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0 [ 846.437001] Call Trace: [ 846.437181] ? check_preempt_wakeup+0xf2/0x230 [ 846.437276] ? check_preempt_curr+0x7c/0x90 [ 846.437370] fscrypt_decrypt_page+0x48/0x4d [ 846.437466] __fscrypt_decrypt_bio+0x5b/0x90 [ 846.437542] decrypt_work+0x12/0x20 [ 846.437651] process_one_work+0x15e/0x3d0 [ 846.437740] worker_thread+0x4c/0x440 [ 846.437848] kthread+0xf8/0x130 [ 846.437938] ? rescuer_thread+0x350/0x350 [ 846.438022] ? kthread_associate_blkcg+0x90/0x90 [ 846.438117] ret_from_fork+0x35/0x40 [ 846.438201] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper [ 846.438653] CR2: 0000000000000008 [ 846.438713] ---[ end trace abca54df39d14f60 ]--- [ 846.438796] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0 [ 846.438844] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24 [ 846.439084] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206 [ 846.439176] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80 [ 846.440927] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8 [ 846.442083] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000 [ 846.443284] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80 [ 846.444448] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60 [ 846.445558] FS: 0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000 [ 846.446687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.447796] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0 - Location https://elixir.bootlin.com/linux/v4.18-rc4/source/fs/crypto/crypto.c#L149 struct crypto_skcipher *tfm = ci->ci_ctfm; Here ci can be NULL Note that this issue maybe require CONFIG_F2FS_FS_ENCRYPTION=y to reproduce. Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2125ff upstream. This fixes missing freeing meta pages in the error case. Tested-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e494c2f upstream. After fuzzing, cp_pack_start_sum could be corrupted, so current log's summary info should be wrong due to loading incorrect summary block. Then, if segment's type in current log is exceeded NR_CURSEG_TYPE, it can lead accessing invalid dirty_i->dirty_segmap bitmap finally. Add sanity check for cp_pack_start_sum to fix this issue. https://bugzilla.kernel.org/show_bug.cgi?id=200419 - Reproduce - Kernel message (f2fs-dev w/ KASAN) [ 3117.578432] F2FS-fs (loop0): Invalid log blocks per segment (8) [ 3117.578445] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 3117.581364] F2FS-fs (loop0): invalid crc_offset: 30716 [ 3117.583564] WARNING: CPU: 1 PID: 1225 at fs/f2fs/checkpoint.c:90 __get_meta_page+0x448/0x4b0 [ 3117.583570] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.584014] CPU: 1 PID: 1225 Comm: mount Not tainted 4.17.0+ Freescale#1 [ 3117.584017] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.584022] RIP: 0010:__get_meta_page+0x448/0x4b0 [ 3117.584023] Code: 00 49 8d bc 24 84 00 00 00 e8 74 54 da ff 41 83 8c 24 84 00 00 00 08 4c 89 f6 4c 89 ef e8 c0 d9 95 00 48 89 ef e8 18 e3 00 00 <0f> 0b f0 80 4d 48 04 e9 0f fe ff ff 0f 0b 48 89 c7 48 89 04 24 e8 [ 3117.584072] RSP: 0018:ffff88018eb678c0 EFLAGS: 00010286 [ 3117.584082] RAX: ffff88018f0a6a78 RBX: ffffea0007a46600 RCX: ffffffff9314d1b2 [ 3117.584085] RDX: ffffffff00000001 RSI: 0000000000000000 RDI: ffff88018f0a6a98 [ 3117.584087] RBP: ffff88018ebe9980 R08: 0000000000000002 R09: 0000000000000001 [ 3117.584090] R10: 0000000000000001 R11: ffffed00326e4450 R12: ffff880193722200 [ 3117.584092] R13: ffff88018ebe9afc R14: 0000000000000206 R15: ffff88018eb67900 [ 3117.584096] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.584098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.584101] CR2: 00000000016f21b8 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.584112] Call Trace: [ 3117.584121] ? f2fs_set_meta_page_dirty+0x150/0x150 [ 3117.584127] ? f2fs_build_segment_manager+0xbf9/0x3190 [ 3117.584133] ? f2fs_npages_for_summary_flush+0x75/0x120 [ 3117.584145] f2fs_build_segment_manager+0xda8/0x3190 [ 3117.584151] ? f2fs_get_valid_checkpoint+0x298/0xa00 [ 3117.584156] ? f2fs_flush_sit_entries+0x10e0/0x10e0 [ 3117.584184] ? map_id_range_down+0x17c/0x1b0 [ 3117.584188] ? __put_user_ns+0x30/0x30 [ 3117.584206] ? find_next_bit+0x53/0x90 [ 3117.584237] ? cpumask_next+0x16/0x20 [ 3117.584249] f2fs_fill_super+0x1948/0x2b40 [ 3117.584258] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584279] ? sget_userns+0x65e/0x690 [ 3117.584296] ? set_blocksize+0x88/0x130 [ 3117.584302] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584305] mount_bdev+0x1c0/0x200 [ 3117.584310] mount_fs+0x5c/0x190 [ 3117.584320] vfs_kern_mount+0x64/0x190 [ 3117.584330] do_mount+0x2e4/0x1450 [ 3117.584343] ? lockref_put_return+0x130/0x130 [ 3117.584347] ? copy_mount_string+0x20/0x20 [ 3117.584357] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.584362] ? kasan_kmalloc+0xa6/0xd0 [ 3117.584373] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.584377] ? __kmalloc_track_caller+0x196/0x210 [ 3117.584383] ? _copy_from_user+0x61/0x90 [ 3117.584396] ? memdup_user+0x3e/0x60 [ 3117.584401] ksys_mount+0x7e/0xd0 [ 3117.584405] __x64_sys_mount+0x62/0x70 [ 3117.584427] do_syscall_64+0x73/0x160 [ 3117.584440] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.584455] RIP: 0033:0x7f5693f14b9a [ 3117.584456] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.584505] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.584510] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.584512] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.584514] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.584516] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.584519] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.584523] ---[ end trace a8e0d899985faf31 ]--- [ 3117.685663] F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. [ 3117.685673] F2FS-fs (loop0): recover_data: ino = 2 (i_size: recover) recovered = 1, err = 0 [ 3117.685707] ================================================================== [ 3117.685955] BUG: KASAN: slab-out-of-bounds in __remove_dirty_segment+0xdd/0x1e0 [ 3117.686175] Read of size 8 at addr ffff88018f0a63d0 by task mount/1225 [ 3117.686477] CPU: 0 PID: 1225 Comm: mount Tainted: G W 4.17.0+ Freescale#1 [ 3117.686481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.686483] Call Trace: [ 3117.686494] dump_stack+0x71/0xab [ 3117.686512] print_address_description+0x6b/0x290 [ 3117.686517] kasan_report+0x28e/0x390 [ 3117.686522] ? __remove_dirty_segment+0xdd/0x1e0 [ 3117.686527] __remove_dirty_segment+0xdd/0x1e0 [ 3117.686532] locate_dirty_segment+0x189/0x190 [ 3117.686538] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.686543] recover_data+0x703/0x2c20 [ 3117.686547] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.686553] ? ksys_mount+0x7e/0xd0 [ 3117.686564] ? policy_nodemask+0x1a/0x90 [ 3117.686567] ? policy_node+0x56/0x70 [ 3117.686571] ? add_fsync_inode+0xf0/0xf0 [ 3117.686592] ? blk_finish_plug+0x44/0x60 [ 3117.686597] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.686602] ? find_inode_fast+0xac/0xc0 [ 3117.686606] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.686618] ? __radix_tree_lookup+0x150/0x150 [ 3117.686633] ? dqget+0x670/0x670 [ 3117.686648] ? pagecache_get_page+0x29/0x410 [ 3117.686656] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.686660] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.686664] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.686670] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.686674] ? rb_insert_color+0x323/0x3d0 [ 3117.686678] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.686683] ? proc_register+0x153/0x1d0 [ 3117.686686] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.686695] ? f2fs_attr_store+0x50/0x50 [ 3117.686700] ? proc_create_single_data+0x52/0x60 [ 3117.686707] f2fs_fill_super+0x1d06/0x2b40 [ 3117.686728] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686735] ? sget_userns+0x65e/0x690 [ 3117.686740] ? set_blocksize+0x88/0x130 [ 3117.686745] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686748] mount_bdev+0x1c0/0x200 [ 3117.686753] mount_fs+0x5c/0x190 [ 3117.686758] vfs_kern_mount+0x64/0x190 [ 3117.686762] do_mount+0x2e4/0x1450 [ 3117.686769] ? lockref_put_return+0x130/0x130 [ 3117.686773] ? copy_mount_string+0x20/0x20 [ 3117.686777] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.686780] ? kasan_kmalloc+0xa6/0xd0 [ 3117.686786] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.686790] ? __kmalloc_track_caller+0x196/0x210 [ 3117.686795] ? _copy_from_user+0x61/0x90 [ 3117.686801] ? memdup_user+0x3e/0x60 [ 3117.686804] ksys_mount+0x7e/0xd0 [ 3117.686809] __x64_sys_mount+0x62/0x70 [ 3117.686816] do_syscall_64+0x73/0x160 [ 3117.686824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.686829] RIP: 0033:0x7f5693f14b9a [ 3117.686830] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.686887] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.686892] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.686894] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.686896] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.686899] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.686901] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.687005] Allocated by task 1225: [ 3117.687152] kasan_kmalloc+0xa6/0xd0 [ 3117.687157] kmem_cache_alloc_trace+0xfd/0x200 [ 3117.687161] f2fs_build_segment_manager+0x2d09/0x3190 [ 3117.687165] f2fs_fill_super+0x1948/0x2b40 [ 3117.687168] mount_bdev+0x1c0/0x200 [ 3117.687171] mount_fs+0x5c/0x190 [ 3117.687174] vfs_kern_mount+0x64/0x190 [ 3117.687177] do_mount+0x2e4/0x1450 [ 3117.687180] ksys_mount+0x7e/0xd0 [ 3117.687182] __x64_sys_mount+0x62/0x70 [ 3117.687186] do_syscall_64+0x73/0x160 [ 3117.687190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.687285] Freed by task 19: [ 3117.687412] __kasan_slab_free+0x137/0x190 [ 3117.687416] kfree+0x8b/0x1b0 [ 3117.687460] ttm_bo_man_put_node+0x61/0x80 [ttm] [ 3117.687476] ttm_bo_cleanup_refs+0x15f/0x250 [ttm] [ 3117.687492] ttm_bo_delayed_delete+0x2f0/0x300 [ttm] [ 3117.687507] ttm_bo_delayed_workqueue+0x17/0x50 [ttm] [ 3117.687528] process_one_work+0x2f9/0x740 [ 3117.687531] worker_thread+0x78/0x6b0 [ 3117.687541] kthread+0x177/0x1c0 [ 3117.687545] ret_from_fork+0x35/0x40 [ 3117.687638] The buggy address belongs to the object at ffff88018f0a6300 which belongs to the cache kmalloc-192 of size 192 [ 3117.688014] The buggy address is located 16 bytes to the right of 192-byte region [ffff88018f0a6300, ffff88018f0a63c0) [ 3117.688382] The buggy address belongs to the page: [ 3117.688554] page:ffffea00063c2980 count:1 mapcount:0 mapping:ffff8801f3403180 index:0x0 [ 3117.688788] flags: 0x17fff8000000100(slab) [ 3117.688944] raw: 017fff8000000100 ffffea00063c2840 0000000e0000000e ffff8801f3403180 [ 3117.689166] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 3117.689386] page dumped because: kasan: bad access detected [ 3117.689653] Memory state around the buggy address: [ 3117.689816] ffff88018f0a6280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3117.690027] ffff88018f0a6300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690239] >ffff88018f0a6380: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.690448] ^ [ 3117.690644] ffff88018f0a6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690868] ffff88018f0a6480: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.691077] ================================================================== [ 3117.691290] Disabling lock debugging due to kernel taint [ 3117.693893] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 3117.694120] PGD 80000001f01bc067 P4D 80000001f01bc067 PUD 1d9638067 PMD 0 [ 3117.694338] Oops: 0002 [Freescale#1] SMP KASAN PTI [ 3117.694490] CPU: 1 PID: 1225 Comm: mount Tainted: G B W 4.17.0+ Freescale#1 [ 3117.694703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.695073] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.695246] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.695793] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.695969] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.696182] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.696391] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.696604] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.696813] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.697032] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.697280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.702357] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.707235] Call Trace: [ 3117.712077] locate_dirty_segment+0x189/0x190 [ 3117.716891] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.721617] recover_data+0x703/0x2c20 [ 3117.726316] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.730957] ? ksys_mount+0x7e/0xd0 [ 3117.735573] ? policy_nodemask+0x1a/0x90 [ 3117.740198] ? policy_node+0x56/0x70 [ 3117.744829] ? add_fsync_inode+0xf0/0xf0 [ 3117.749487] ? blk_finish_plug+0x44/0x60 [ 3117.754152] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.758831] ? find_inode_fast+0xac/0xc0 [ 3117.763448] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.768046] ? __radix_tree_lookup+0x150/0x150 [ 3117.772603] ? dqget+0x670/0x670 [ 3117.777159] ? pagecache_get_page+0x29/0x410 [ 3117.781648] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.786067] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.790476] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.794790] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.799086] ? rb_insert_color+0x323/0x3d0 [ 3117.803304] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.807563] ? proc_register+0x153/0x1d0 [ 3117.811766] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.815947] ? f2fs_attr_store+0x50/0x50 [ 3117.820087] ? proc_create_single_data+0x52/0x60 [ 3117.824262] f2fs_fill_super+0x1d06/0x2b40 [ 3117.828367] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.832432] ? sget_userns+0x65e/0x690 [ 3117.836500] ? set_blocksize+0x88/0x130 [ 3117.840501] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.844420] mount_bdev+0x1c0/0x200 [ 3117.848275] mount_fs+0x5c/0x190 [ 3117.852053] vfs_kern_mount+0x64/0x190 [ 3117.855810] do_mount+0x2e4/0x1450 [ 3117.859441] ? lockref_put_return+0x130/0x130 [ 3117.862996] ? copy_mount_string+0x20/0x20 [ 3117.866417] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.869719] ? kasan_kmalloc+0xa6/0xd0 [ 3117.872948] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.876121] ? __kmalloc_track_caller+0x196/0x210 [ 3117.879333] ? _copy_from_user+0x61/0x90 [ 3117.882467] ? memdup_user+0x3e/0x60 [ 3117.885604] ksys_mount+0x7e/0xd0 [ 3117.888700] __x64_sys_mount+0x62/0x70 [ 3117.891742] do_syscall_64+0x73/0x160 [ 3117.894692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.897669] RIP: 0033:0x7f5693f14b9a [ 3117.900563] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.906922] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.910159] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.913469] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.916764] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.920071] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.923393] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.926680] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.949979] CR2: 0000000000000000 [ 3117.954283] ---[ end trace a8e0d899985faf32 ]--- [ 3117.958575] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.962810] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.971789] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.976333] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.980926] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.985497] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.990098] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.994761] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.999392] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3118.004096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3118.008816] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 - Location https://elixir.bootlin.com/linux/v4.18-rc3/source/fs/f2fs/segment.c#L775 if (test_and_clear_bit(segno, dirty_i->dirty_segmap[t])) dirty_i->nr_dirty[t]--; Here dirty_i->dirty_segmap[t] can be NULL which leads to crash in test_and_clear_bit() Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> [bwh: Backported to 4.9: The function is called sanity_check_ckpt()] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…TR_REPLACE commit 7b38460 upstream. Kanda Motohiro reported that expanding a tiny xattr into a large xattr fails on XFS because we remove the tiny xattr from a shortform fork and then try to re-add it after converting the fork to extents format having not removed the ATTR_REPLACE flag. This fails because the attr is no longer present, causing a fs shutdown. This is derived from the patch in his bug report, but we really shouldn't ignore a nonzero retval from the remove call. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199119 Reported-by: kanda.motohiro@gmail.com Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df63c2 upstream. This is a fix for a regression in 32 bit kernels caused by an invalid check for pgoff overflow in hugetlbfs mmap setup. The check incorrectly specified that the size of a loff_t was the same as the size of a long. The regression prevents mapping hugetlbfs files at offsets greater than 4GB on 32 bit kernels. On 32 bit kernels conversion from a page based unsigned long can not overflow a loff_t byte offset. Therefore, skip this check if sizeof(unsigned long) != sizeof(loff_t). Link: http://lkml.kernel.org/r/20180330145402.5053-1-mike.kravetz@oracle.com Fixes: 63489f8 ("hugetlbfs: check for pgoff value overflow") Reported-by: Dan Rue <dan.rue@linaro.org> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nic Losby <blurbdust@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 4.9.144 stable release
otavio
pushed a commit
that referenced
this pull request
Dec 12, 2018
[ Upstream commit 3fcbb82 ] In 4.19-rc1, Eugeniy reported weird boot and IO errors on ARC HSDK | INFO: task syslogd:77 blocked for more than 10 seconds. | Not tainted 4.19.0-rc1-00007-gf213acea4e88 #40 | "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this | message. | syslogd D 0 77 76 0x00000000 | | Stack Trace: | __switch_to+0x0/0xac | __schedule+0x1b2/0x730 | io_schedule+0x5c/0xc0 | __lock_page+0x98/0xdc | find_lock_entry+0x38/0x100 | shmem_getpage_gfp.isra.3+0x82/0xbfc | shmem_fault+0x46/0x138 | handle_mm_fault+0x5bc/0x924 | do_page_fault+0x100/0x2b8 | ret_from_exception+0x0/0x8 He bisected to 84c6591 ("locking/atomics, asm-generic/bitops/lock.h: Rewrite using atomic_fetch_*()") This commit however only unmasked the real issue introduced by commit 4aef66c ("locking/atomic, arch/arc: Fix build") which missed the retry-if-scond-failed branch in atomic_fetch_##op() macros. The bisected commit started using atomic_fetch_##op() macros for building the rest of atomics. Fixes: 4aef66c ("locking/atomic, arch/arc: Fix build") Reported-by: Eugeniy Paltsev <paltsev@synopsys.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: wrote changelog] Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chainq
pushed a commit
to coderetro/linux-fslc
that referenced
this pull request
Jan 10, 2019
[ Upstream commit 78ee994 ] Because rfi_flush_fallback runs immediately before the return to userspace it currently runs with the user r1 (stack pointer). This means if we oops in there we will report a bad kernel stack pointer in the exception entry path, eg: Bad kernel stack pointer 7ffff7150e40 at c0000000000023b4 Oops: Bad kernel stack pointer, sig: 6 [Freescale#1] LE SMP NR_CPUS=32 NUMA PowerNV Modules linked in: CPU: 0 PID: 1246 Comm: klogd Not tainted 4.18.0-rc2-gcc-7.3.1-00175-g0443f8a69ba3 Freescale#7 NIP: c0000000000023b4 LR: 0000000010053e00 CTR: 0000000000000040 REGS: c0000000fffe7d40 TRAP: 4100 Not tainted (4.18.0-rc2-gcc-7.3.1-00175-g0443f8a69ba3) MSR: 9000000002803031 <SF,HV,VEC,VSX,FP,ME,IR,DR,LE> CR: 44000442 XER: 20000000 CFAR: c00000000000bac8 IRQMASK: c0000000f1e66a80 GPR00: 0000000002000000 00007ffff7150e40 00007fff93a99900 0000000000000020 ... NIP [c0000000000023b4] rfi_flush_fallback+0x34/0x80 LR [0000000010053e00] 0x10053e00 Although the NIP tells us where we were, and the TRAP number tells us what happened, it would still be nicer if we could report the actual exception rather than barfing about the stack pointer. We an do that fairly simply by loading the kernel stack pointer on entry and restoring the user value before returning. That way we see a regular oops such as: Unrecoverable exception 4100 at c00000000000239c Oops: Unrecoverable exception, sig: 6 [Freescale#1] LE SMP NR_CPUS=32 NUMA PowerNV Modules linked in: CPU: 0 PID: 1251 Comm: klogd Not tainted 4.18.0-rc3-gcc-7.3.1-00097-g4ebfcac65acd-dirty Freescale#40 NIP: c00000000000239c LR: 0000000010053e00 CTR: 0000000000000040 REGS: c0000000f1e17bb0 TRAP: 4100 Not tainted (4.18.0-rc3-gcc-7.3.1-00097-g4ebfcac65acd-dirty) MSR: 9000000002803031 <SF,HV,VEC,VSX,FP,ME,IR,DR,LE> CR: 44000442 XER: 20000000 CFAR: c00000000000bac8 IRQMASK: 0 ... NIP [c00000000000239c] rfi_flush_fallback+0x3c/0x80 LR [0000000010053e00] 0x10053e00 Call Trace: [c0000000f1e17e30] [c00000000000b9e4] system_call+0x5c/0x70 (unreliable) Note this shouldn't make the kernel stack pointer vulnerable to a meltdown attack, because it should be flushed from the cache before we return to userspace. The user r1 value will be in the cache, because we load it in the return path, but that is harmless. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
otavio
pushed a commit
that referenced
this pull request
Jun 14, 2019
…text commit 0c9e8b3 upstream. stub_probe() and stub_disconnect() call functions which could call sleeping function in invalid context whil holding busid_lock. Fix the problem by refining the lock holds to short critical sections to change the busid_priv fields. This fix restructures the code to limit the lock holds in stub_probe() and stub_disconnect(). stub_probe(): [15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418 [15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip [15217.927044] 5 locks held by usbip/29087: [15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15217.927062] #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15217.927072] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15217.927082] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15217.927090] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15217.927109] Call Trace: [15217.927118] dump_stack+0x63/0x85 [15217.927127] ___might_sleep+0xff/0x120 [15217.927133] __might_sleep+0x4a/0x80 [15217.927143] kmem_cache_alloc_trace+0x1aa/0x210 [15217.927156] stub_probe+0xe8/0x440 [usbip_host] [15217.927171] usb_probe_device+0x34/0x70 stub_disconnect(): [15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip [15279.182492] 5 locks held by usbip/29114: [15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15279.182506] #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15279.182514] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15279.182522] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15279.182529] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15279.182546] Call Trace: [15279.182554] dump_stack+0x63/0x85 [15279.182561] ___might_sleep+0xff/0x120 [15279.182566] __might_sleep+0x4a/0x80 [15279.182574] __mutex_lock+0x55/0x950 [15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182587] ? reacquire_held_locks+0xec/0x1a0 [15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182597] ? find_held_lock+0x94/0xa0 [15279.182609] mutex_lock_nested+0x1b/0x20 [15279.182614] ? mutex_lock_nested+0x1b/0x20 [15279.182618] kernfs_remove_by_name_ns+0x2a/0x90 [15279.182625] sysfs_remove_file_ns+0x15/0x20 [15279.182629] device_remove_file+0x19/0x20 [15279.182634] stub_disconnect+0x6d/0x180 [usbip_host] [15279.182643] usb_unbind_device+0x27/0x60 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fbertux
pushed a commit
that referenced
this pull request
Jun 14, 2019
…text commit 0c9e8b3 upstream. stub_probe() and stub_disconnect() call functions which could call sleeping function in invalid context whil holding busid_lock. Fix the problem by refining the lock holds to short critical sections to change the busid_priv fields. This fix restructures the code to limit the lock holds in stub_probe() and stub_disconnect(). stub_probe(): [15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418 [15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip [15217.927044] 5 locks held by usbip/29087: [15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15217.927062] #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15217.927072] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15217.927082] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15217.927090] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15217.927109] Call Trace: [15217.927118] dump_stack+0x63/0x85 [15217.927127] ___might_sleep+0xff/0x120 [15217.927133] __might_sleep+0x4a/0x80 [15217.927143] kmem_cache_alloc_trace+0x1aa/0x210 [15217.927156] stub_probe+0xe8/0x440 [usbip_host] [15217.927171] usb_probe_device+0x34/0x70 stub_disconnect(): [15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip [15279.182492] 5 locks held by usbip/29114: [15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15279.182506] #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15279.182514] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15279.182522] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15279.182529] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15279.182546] Call Trace: [15279.182554] dump_stack+0x63/0x85 [15279.182561] ___might_sleep+0xff/0x120 [15279.182566] __might_sleep+0x4a/0x80 [15279.182574] __mutex_lock+0x55/0x950 [15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182587] ? reacquire_held_locks+0xec/0x1a0 [15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182597] ? find_held_lock+0x94/0xa0 [15279.182609] mutex_lock_nested+0x1b/0x20 [15279.182614] ? mutex_lock_nested+0x1b/0x20 [15279.182618] kernfs_remove_by_name_ns+0x2a/0x90 [15279.182625] sysfs_remove_file_ns+0x15/0x20 [15279.182629] device_remove_file+0x19/0x20 [15279.182634] stub_disconnect+0x6d/0x180 [usbip_host] [15279.182643] usb_unbind_device+0x27/0x60 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
otavio
pushed a commit
that referenced
this pull request
Jul 15, 2019
…text commit 0c9e8b3 upstream. stub_probe() and stub_disconnect() call functions which could call sleeping function in invalid context whil holding busid_lock. Fix the problem by refining the lock holds to short critical sections to change the busid_priv fields. This fix restructures the code to limit the lock holds in stub_probe() and stub_disconnect(). stub_probe(): [15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418 [15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip [15217.927044] 5 locks held by usbip/29087: [15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15217.927062] #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15217.927072] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15217.927082] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15217.927090] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15217.927109] Call Trace: [15217.927118] dump_stack+0x63/0x85 [15217.927127] ___might_sleep+0xff/0x120 [15217.927133] __might_sleep+0x4a/0x80 [15217.927143] kmem_cache_alloc_trace+0x1aa/0x210 [15217.927156] stub_probe+0xe8/0x440 [usbip_host] [15217.927171] usb_probe_device+0x34/0x70 stub_disconnect(): [15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip [15279.182492] 5 locks held by usbip/29114: [15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15279.182506] #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15279.182514] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15279.182522] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15279.182529] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15279.182546] Call Trace: [15279.182554] dump_stack+0x63/0x85 [15279.182561] ___might_sleep+0xff/0x120 [15279.182566] __might_sleep+0x4a/0x80 [15279.182574] __mutex_lock+0x55/0x950 [15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182587] ? reacquire_held_locks+0xec/0x1a0 [15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182597] ? find_held_lock+0x94/0xa0 [15279.182609] mutex_lock_nested+0x1b/0x20 [15279.182614] ? mutex_lock_nested+0x1b/0x20 [15279.182618] kernfs_remove_by_name_ns+0x2a/0x90 [15279.182625] sysfs_remove_file_ns+0x15/0x20 [15279.182629] device_remove_file+0x19/0x20 [15279.182634] stub_disconnect+0x6d/0x180 [usbip_host] [15279.182643] usb_unbind_device+0x27/0x60 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LeBlue
pushed a commit
to LeBlue/linux-fslc
that referenced
this pull request
Feb 25, 2020
…text commit 0c9e8b3 upstream. stub_probe() and stub_disconnect() call functions which could call sleeping function in invalid context whil holding busid_lock. Fix the problem by refining the lock holds to short critical sections to change the busid_priv fields. This fix restructures the code to limit the lock holds in stub_probe() and stub_disconnect(). stub_probe(): [15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418 [15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip [15217.927044] 5 locks held by usbip/29087: [15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15217.927062] Freescale#1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15217.927072] Freescale#2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15217.927082] Freescale#3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15217.927090] Freescale#4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ Freescale#40 [15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15217.927109] Call Trace: [15217.927118] dump_stack+0x63/0x85 [15217.927127] ___might_sleep+0xff/0x120 [15217.927133] __might_sleep+0x4a/0x80 [15217.927143] kmem_cache_alloc_trace+0x1aa/0x210 [15217.927156] stub_probe+0xe8/0x440 [usbip_host] [15217.927171] usb_probe_device+0x34/0x70 stub_disconnect(): [15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip [15279.182492] 5 locks held by usbip/29114: [15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15279.182506] Freescale#1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15279.182514] Freescale#2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15279.182522] Freescale#3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15279.182529] Freescale#4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ Freescale#40 [15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15279.182546] Call Trace: [15279.182554] dump_stack+0x63/0x85 [15279.182561] ___might_sleep+0xff/0x120 [15279.182566] __might_sleep+0x4a/0x80 [15279.182574] __mutex_lock+0x55/0x950 [15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182587] ? reacquire_held_locks+0xec/0x1a0 [15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182597] ? find_held_lock+0x94/0xa0 [15279.182609] mutex_lock_nested+0x1b/0x20 [15279.182614] ? mutex_lock_nested+0x1b/0x20 [15279.182618] kernfs_remove_by_name_ns+0x2a/0x90 [15279.182625] sysfs_remove_file_ns+0x15/0x20 [15279.182629] device_remove_file+0x19/0x20 [15279.182634] stub_disconnect+0x6d/0x180 [usbip_host] [15279.182643] usb_unbind_device+0x27/0x60 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
May 22, 2021
[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... Freescale#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 Freescale#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 Freescale#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... Freescale#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... Freescale#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 Freescale#45 0x00007f8990968b85 in __getgrnam_r [...] Freescale#46 0x00007f89909d6b77 in grantpt [...] Freescale#47 0x00007f8990a9394e in __GI_openpty [...] Freescale#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 Freescale#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 Freescale#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 Freescale#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 Freescale#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
May 22, 2021
[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... Freescale#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 Freescale#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 Freescale#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... Freescale#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... Freescale#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 Freescale#45 0x00007f8990968b85 in __getgrnam_r [...] Freescale#46 0x00007f89909d6b77 in grantpt [...] Freescale#47 0x00007f8990a9394e in __GI_openpty [...] Freescale#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 Freescale#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 Freescale#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 Freescale#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 Freescale#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
May 22, 2021
[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... Freescale#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 Freescale#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 Freescale#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... Freescale#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... Freescale#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 Freescale#45 0x00007f8990968b85 in __getgrnam_r [...] Freescale#46 0x00007f89909d6b77 in grantpt [...] Freescale#47 0x00007f8990a9394e in __GI_openpty [...] Freescale#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 Freescale#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 Freescale#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 Freescale#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 Freescale#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jul 20, 2021
[ Upstream commit 1a45200 ] In 'bt878_irq', the driver calls 'tasklet_schedule', but this tasklet is set in 'dvb_bt8xx_load_card' of another driver 'dvb-bt8xx'. However, this two drivers are separate. The user may not load the 'dvb-bt8xx' driver when loading the 'bt8xx' driver, that is, the tasklet has not been initialized when 'tasklet_schedule' is called, so it is necessary to check whether the tasklet is initialized in 'bt878_probe'. Fix this by adding a check at the end of bt878_probe. The KASAN's report reveals it: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000006aab2067 P4D 800000006aab2067 PUD 6b2ea067 PMD 0 Oops: 0010 [Freescale#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 8724 Comm: syz-executor.0 Not tainted 4.19.177- gdba4159c14ef-dirty Freescale#40 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tasklet_action_common.isra.17+0x141/0x420 kernel/softirq.c:522 tasklet_action+0x50/0x70 kernel/softirq.c:540 __do_softirq+0x224/0x92c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:372 [inline] irq_exit+0x15a/0x180 kernel/softirq.c:412 exiting_irq arch/x86/include/asm/apic.h:535 [inline] do_IRQ+0x123/0x1e0 arch/x86/kernel/irq.c:260 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:__do_sys_interrupt kernel/sys.c:2593 [inline] RIP: 0010:__se_sys_interrupt kernel/sys.c:2584 [inline] RIP: 0010:__x64_sys_interrupt+0x5b/0x80 kernel/sys.c:2584 Code: ba 00 04 00 00 48 c7 c7 c0 99 31 8c e8 ae 76 5e 01 48 85 c0 75 21 e8 14 ae 24 00 48 c7 c3 c0 99 31 8c b8 0c 00 00 00 0f 01 c1 <31> db e8 fe ad 24 00 48 89 d8 5b 5d c3 48 c7 c3 ea ff ff ff eb ec RSP: 0018:ffff888054167f10 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde RAX: 000000000000000c RBX: ffffffff8c3199c0 RCX: ffffc90001ca6000 RDX: 000000000000001a RSI: ffffffff813478fc RDI: ffffffff8c319dc0 RBP: ffff888054167f18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000080 R11: fffffbfff18633b7 R12: ffff888054167f58 R13: ffff88805f638000 R14: 0000000000000000 R15: 0000000000000000 do_syscall_64+0xb0/0x4e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4692a9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6b550e5c48 EFLAGS: 00000246 ORIG_RAX: 000000000000014f RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 00000000004692a9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 00000000004cf7eb R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf60 R13: 0000000000000000 R14: 000000000077bf60 R15: 00007fff55a1dca0 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) CR2: 0000000000000000 ---[ end trace 68e5849c3f77cbb6 ]--- RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jul 20, 2021
[ Upstream commit 1a45200 ] In 'bt878_irq', the driver calls 'tasklet_schedule', but this tasklet is set in 'dvb_bt8xx_load_card' of another driver 'dvb-bt8xx'. However, this two drivers are separate. The user may not load the 'dvb-bt8xx' driver when loading the 'bt8xx' driver, that is, the tasklet has not been initialized when 'tasklet_schedule' is called, so it is necessary to check whether the tasklet is initialized in 'bt878_probe'. Fix this by adding a check at the end of bt878_probe. The KASAN's report reveals it: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000006aab2067 P4D 800000006aab2067 PUD 6b2ea067 PMD 0 Oops: 0010 [Freescale#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 8724 Comm: syz-executor.0 Not tainted 4.19.177- gdba4159c14ef-dirty Freescale#40 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tasklet_action_common.isra.17+0x141/0x420 kernel/softirq.c:522 tasklet_action+0x50/0x70 kernel/softirq.c:540 __do_softirq+0x224/0x92c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:372 [inline] irq_exit+0x15a/0x180 kernel/softirq.c:412 exiting_irq arch/x86/include/asm/apic.h:535 [inline] do_IRQ+0x123/0x1e0 arch/x86/kernel/irq.c:260 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:__do_sys_interrupt kernel/sys.c:2593 [inline] RIP: 0010:__se_sys_interrupt kernel/sys.c:2584 [inline] RIP: 0010:__x64_sys_interrupt+0x5b/0x80 kernel/sys.c:2584 Code: ba 00 04 00 00 48 c7 c7 c0 99 31 8c e8 ae 76 5e 01 48 85 c0 75 21 e8 14 ae 24 00 48 c7 c3 c0 99 31 8c b8 0c 00 00 00 0f 01 c1 <31> db e8 fe ad 24 00 48 89 d8 5b 5d c3 48 c7 c3 ea ff ff ff eb ec RSP: 0018:ffff888054167f10 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde RAX: 000000000000000c RBX: ffffffff8c3199c0 RCX: ffffc90001ca6000 RDX: 000000000000001a RSI: ffffffff813478fc RDI: ffffffff8c319dc0 RBP: ffff888054167f18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000080 R11: fffffbfff18633b7 R12: ffff888054167f58 R13: ffff88805f638000 R14: 0000000000000000 R15: 0000000000000000 do_syscall_64+0xb0/0x4e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4692a9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6b550e5c48 EFLAGS: 00000246 ORIG_RAX: 000000000000014f RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 00000000004692a9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 00000000004cf7eb R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf60 R13: 0000000000000000 R14: 000000000077bf60 R15: 00007fff55a1dca0 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) CR2: 0000000000000000 ---[ end trace 68e5849c3f77cbb6 ]--- RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jul 20, 2021
[ Upstream commit 1a45200 ] In 'bt878_irq', the driver calls 'tasklet_schedule', but this tasklet is set in 'dvb_bt8xx_load_card' of another driver 'dvb-bt8xx'. However, this two drivers are separate. The user may not load the 'dvb-bt8xx' driver when loading the 'bt8xx' driver, that is, the tasklet has not been initialized when 'tasklet_schedule' is called, so it is necessary to check whether the tasklet is initialized in 'bt878_probe'. Fix this by adding a check at the end of bt878_probe. The KASAN's report reveals it: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000006aab2067 P4D 800000006aab2067 PUD 6b2ea067 PMD 0 Oops: 0010 [Freescale#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 8724 Comm: syz-executor.0 Not tainted 4.19.177- gdba4159c14ef-dirty Freescale#40 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tasklet_action_common.isra.17+0x141/0x420 kernel/softirq.c:522 tasklet_action+0x50/0x70 kernel/softirq.c:540 __do_softirq+0x224/0x92c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:372 [inline] irq_exit+0x15a/0x180 kernel/softirq.c:412 exiting_irq arch/x86/include/asm/apic.h:535 [inline] do_IRQ+0x123/0x1e0 arch/x86/kernel/irq.c:260 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:__do_sys_interrupt kernel/sys.c:2593 [inline] RIP: 0010:__se_sys_interrupt kernel/sys.c:2584 [inline] RIP: 0010:__x64_sys_interrupt+0x5b/0x80 kernel/sys.c:2584 Code: ba 00 04 00 00 48 c7 c7 c0 99 31 8c e8 ae 76 5e 01 48 85 c0 75 21 e8 14 ae 24 00 48 c7 c3 c0 99 31 8c b8 0c 00 00 00 0f 01 c1 <31> db e8 fe ad 24 00 48 89 d8 5b 5d c3 48 c7 c3 ea ff ff ff eb ec RSP: 0018:ffff888054167f10 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde RAX: 000000000000000c RBX: ffffffff8c3199c0 RCX: ffffc90001ca6000 RDX: 000000000000001a RSI: ffffffff813478fc RDI: ffffffff8c319dc0 RBP: ffff888054167f18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000080 R11: fffffbfff18633b7 R12: ffff888054167f58 R13: ffff88805f638000 R14: 0000000000000000 R15: 0000000000000000 do_syscall_64+0xb0/0x4e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4692a9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6b550e5c48 EFLAGS: 00000246 ORIG_RAX: 000000000000014f RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 00000000004692a9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 00000000004cf7eb R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf60 R13: 0000000000000000 R14: 000000000077bf60 R15: 00007fff55a1dca0 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) CR2: 0000000000000000 ---[ end trace 68e5849c3f77cbb6 ]--- RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Aug 26, 2021
…king KUEP [ Upstream commit ef486bf ] Commit b5efec0 ("powerpc/32s: Move KUEP locking/unlocking in C") removed the 'isync' instruction after adding/removing NX bit in user segments. The reasoning behind this change was that when setting the NX bit we don't mind it taking effect with delay as the kernel never executes text from userspace, and when clearing the NX bit this is to return to userspace and then the 'rfi' should synchronise the context. However, it looks like on book3s/32 having a hash page table, at least on the G3 processor, we get an unexpected fault from userspace, then this is followed by something wrong in the verification of MSR_PR at end of another interrupt. This is fixed by adding back the removed isync() following update of NX bit in user segment registers. Only do it for cores with an hash table, as 603 cores don't exhibit that problem and the two isync increase ./null_syscall selftest by 6 cycles on an MPC 832x. First problem: unexpected WARN_ON() for mysterious PROTFAULT WARNING: CPU: 0 PID: 1660 at arch/powerpc/mm/fault.c:354 do_page_fault+0x6c/0x5b0 Modules linked in: CPU: 0 PID: 1660 Comm: Xorg Not tainted 5.13.0-pmac-00028-gb3c15b60339a Freescale#40 NIP: c001b5c8 LR: c001b6f8 CTR: 00000000 REGS: e2d09e40 TRAP: 0700 Not tainted (5.13.0-pmac-00028-gb3c15b60339a) MSR: 00021032 <ME,IR,DR,RI> CR: 42d04f30 XER: 20000000 GPR00: c000424c e2d09f00 c301b680 e2d09f40 0000001e 42000000 00cba028 00000000 GPR08: 08000000 48000010 c301b680 e2d09f30 22d09f30 00c1fff0 00cba000 a7b7ba4c GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010 GPR24: a7b7b64c a7b7d2f0 00000004 00000000 c1efa6c0 00cba02c 00000300 e2d09f40 NIP [c001b5c8] do_page_fault+0x6c/0x5b0 LR [c001b6f8] do_page_fault+0x19c/0x5b0 Call Trace: [e2d09f00] [e2d09f04] 0xe2d09f04 (unreliable) [e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4 --- interrupt: 300 at 0xa7a261dc NIP: a7a261dc LR: a7a253bc CTR: 00000000 REGS: e2d09f40 TRAP: 0300 Not tainted (5.13.0-pmac-00028-gb3c15b60339a) MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 228428e2 XER: 20000000 DAR: 00cba02c DSISR: 42000000 GPR00: a7a27448 afa6b0e0 a74c35c0 a7b7b614 0000001e a7b7b614 00cba028 00000000 GPR08: 00020fd9 00000031 00cb9ff8 a7a273b0 220028e2 00c1fff0 00cba000 a7b7ba4c GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010 GPR24: a7b7b64c a7b7d2f0 00000004 00000002 0000001e a7b7b614 a7b7aff4 00000030 NIP [a7a261dc] 0xa7a261dc LR [a7a253bc] 0xa7a253bc --- interrupt: 300 Instruction dump: 7c4a1378 810300a0 75278410 83820298 83a300a4 553b018c 551e0036 4082038c 2e1b0000 40920228 75280800 41820220 <0fe00000> 3b600000 41920214 81420594 Second problem: MSR PR is seen unset allthough the interrupt frame shows it set kernel BUG at arch/powerpc/kernel/interrupt.c:458! Oops: Exception in kernel mode, sig: 5 [Freescale#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 1660 Comm: Xorg Tainted: G W 5.13.0-pmac-00028-gb3c15b60339a Freescale#40 NIP: c0011434 LR: c001629c CTR: 00000000 REGS: e2d09e70 TRAP: 0700 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42d09f30 XER: 00000000 GPR00: 00000000 e2d09f30 c301b680 e2d09f40 83440000 c44d0e68 e2d09e8c 00000000 GPR08: 00000002 00dc228a 00004000 e2d09f30 22d09f30 00c1fff0 afa6ceb4 00c26144 GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000 GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089 NIP [c0011434] interrupt_exit_kernel_prepare+0x10/0x70 LR [c001629c] interrupt_return+0x9c/0x144 Call Trace: [e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4 (unreliable) --- interrupt: 300 at 0xa09be008 NIP: a09be008 LR: a09bdfe8 CTR: a09bdfc0 REGS: e2d09f40 TRAP: 0300 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a) MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 420028e2 XER: 20000000 DAR: a539a308 DSISR: 0a000000 GPR00: a7b90d50 afa6b2d0 a74c35c0 a0a8b690 a0a8b698 a5365d70 a4fa82a8 00000004 GPR08: 00000000 a09bdfc0 00000000 a5360000 a09bde7c 00c1fff0 afa6ceb4 00c26144 GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000 GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089 NIP [a09be008] 0xa09be008 LR [a09bdfe8] 0xa09bdfe8 --- interrupt: 300 Instruction dump: 80010024 83e1001c 7c0803a6 4bffff80 3bc00800 4bffffd0 486b42fd 4bffffcc 81430084 71480002 41820038 554a0462 <0f0a0000> 80620060 74630001 40820034 Fixes: b5efec0 ("powerpc/32s: Move KUEP locking/unlocking in C") Cc: stable@vger.kernel.org # v5.13+ Reported-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4856f5574906e2aec0522be17bf3848a22b2cd0b.1629269345.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
LeBlue
pushed a commit
to LeBlue/linux-fslc
that referenced
this pull request
Jan 20, 2022
[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... Freescale#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 Freescale#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 Freescale#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... Freescale#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... Freescale#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 Freescale#45 0x00007f8990968b85 in __getgrnam_r [...] Freescale#46 0x00007f89909d6b77 in grantpt [...] Freescale#47 0x00007f8990a9394e in __GI_openpty [...] Freescale#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 Freescale#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 Freescale#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 Freescale#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 Freescale#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
LeBlue
pushed a commit
to LeBlue/linux-fslc
that referenced
this pull request
Jan 20, 2022
[ Upstream commit 1a45200 ] In 'bt878_irq', the driver calls 'tasklet_schedule', but this tasklet is set in 'dvb_bt8xx_load_card' of another driver 'dvb-bt8xx'. However, this two drivers are separate. The user may not load the 'dvb-bt8xx' driver when loading the 'bt8xx' driver, that is, the tasklet has not been initialized when 'tasklet_schedule' is called, so it is necessary to check whether the tasklet is initialized in 'bt878_probe'. Fix this by adding a check at the end of bt878_probe. The KASAN's report reveals it: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000006aab2067 P4D 800000006aab2067 PUD 6b2ea067 PMD 0 Oops: 0010 [Freescale#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 8724 Comm: syz-executor.0 Not tainted 4.19.177- gdba4159c14ef-dirty Freescale#40 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tasklet_action_common.isra.17+0x141/0x420 kernel/softirq.c:522 tasklet_action+0x50/0x70 kernel/softirq.c:540 __do_softirq+0x224/0x92c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:372 [inline] irq_exit+0x15a/0x180 kernel/softirq.c:412 exiting_irq arch/x86/include/asm/apic.h:535 [inline] do_IRQ+0x123/0x1e0 arch/x86/kernel/irq.c:260 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:__do_sys_interrupt kernel/sys.c:2593 [inline] RIP: 0010:__se_sys_interrupt kernel/sys.c:2584 [inline] RIP: 0010:__x64_sys_interrupt+0x5b/0x80 kernel/sys.c:2584 Code: ba 00 04 00 00 48 c7 c7 c0 99 31 8c e8 ae 76 5e 01 48 85 c0 75 21 e8 14 ae 24 00 48 c7 c3 c0 99 31 8c b8 0c 00 00 00 0f 01 c1 <31> db e8 fe ad 24 00 48 89 d8 5b 5d c3 48 c7 c3 ea ff ff ff eb ec RSP: 0018:ffff888054167f10 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde RAX: 000000000000000c RBX: ffffffff8c3199c0 RCX: ffffc90001ca6000 RDX: 000000000000001a RSI: ffffffff813478fc RDI: ffffffff8c319dc0 RBP: ffff888054167f18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000080 R11: fffffbfff18633b7 R12: ffff888054167f58 R13: ffff88805f638000 R14: 0000000000000000 R15: 0000000000000000 do_syscall_64+0xb0/0x4e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4692a9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6b550e5c48 EFLAGS: 00000246 ORIG_RAX: 000000000000014f RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 00000000004692a9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 00000000004cf7eb R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf60 R13: 0000000000000000 R14: 000000000077bf60 R15: 00007fff55a1dca0 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) CR2: 0000000000000000 ---[ end trace 68e5849c3f77cbb6 ]--- RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88806c287ea0 EFLAGS: 00010246 RAX: fffffbfff1b01774 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffffffff1b01775 RDI: 0000000000000000 RBP: ffff88806c287f00 R08: fffffbfff1b01774 R09: fffffbfff1b01774 R10: 0000000000000001 R11: fffffbfff1b01773 R12: 0000000000000000 R13: ffff88806c29f530 R14: ffffffff8d80bb88 R15: ffffffff8d80bb90 FS: 00007f6b550e6700(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000005ec98000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
May 25, 2022
…frame() [ Upstream commit 9be4c88 ] The following KASAN warning is detected by QEMU. ================================================================== BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870 Read of size 4 at addr c36bba90 by task cat/163 CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 Freescale#40 Hardware name: ARM-Versatile Express [<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14) [<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0) [<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc) [<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170) [<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870) [<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134) [<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4) [<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60) [<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c) [<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120) [<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334) [<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc) [<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518) [<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0) [<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110) [<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8) [<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94) Exception stack(0xc36bb928 to 0xc36bb970) b920: c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730 b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978 b960: c010e298 c011373c 60000013 ffffffff [<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870) [<c011373c>] (unwind_frame) from [<00000000>] (0x0) The buggy address belongs to the page: page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb flags: 0x0() raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000 page dumped because: kasan: bad access detected addr c36bba90 is located in stack of task cat/163 at offset 48 in frame: stack_trace_save+0x0/0xb4 this frame has 1 object: [32, 48) 'trace' Memory state around the buggy address: c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00 c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 >c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== There is a same issue on x86 and has been resolved by the commit f7d27c3 ("x86/mm, kasan: Silence KASAN warnings in get_wchan()"). The solution could be applied to arm architecture too. Signed-off-by: Lin Yujun <linyujun809@huawei.com> Reported-by: He Ying <heying24@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
May 26, 2022
…frame() [ Upstream commit 9be4c88 ] The following KASAN warning is detected by QEMU. ================================================================== BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870 Read of size 4 at addr c36bba90 by task cat/163 CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 Freescale#40 Hardware name: ARM-Versatile Express [<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14) [<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0) [<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc) [<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170) [<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870) [<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134) [<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4) [<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60) [<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c) [<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120) [<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334) [<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc) [<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518) [<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0) [<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110) [<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8) [<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94) Exception stack(0xc36bb928 to 0xc36bb970) b920: c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730 b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978 b960: c010e298 c011373c 60000013 ffffffff [<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870) [<c011373c>] (unwind_frame) from [<00000000>] (0x0) The buggy address belongs to the page: page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb flags: 0x0() raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000 page dumped because: kasan: bad access detected addr c36bba90 is located in stack of task cat/163 at offset 48 in frame: stack_trace_save+0x0/0xb4 this frame has 1 object: [32, 48) 'trace' Memory state around the buggy address: c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00 c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 >c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== There is a same issue on x86 and has been resolved by the commit f7d27c3 ("x86/mm, kasan: Silence KASAN warnings in get_wchan()"). The solution could be applied to arm architecture too. Signed-off-by: Lin Yujun <linyujun809@huawei.com> Reported-by: He Ying <heying24@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
May 26, 2022
…frame() [ Upstream commit 9be4c88 ] The following KASAN warning is detected by QEMU. ================================================================== BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870 Read of size 4 at addr c36bba90 by task cat/163 CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 Freescale#40 Hardware name: ARM-Versatile Express [<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14) [<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0) [<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc) [<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170) [<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870) [<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134) [<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4) [<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60) [<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c) [<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120) [<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334) [<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc) [<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518) [<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0) [<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110) [<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8) [<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94) Exception stack(0xc36bb928 to 0xc36bb970) b920: c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730 b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978 b960: c010e298 c011373c 60000013 ffffffff [<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870) [<c011373c>] (unwind_frame) from [<00000000>] (0x0) The buggy address belongs to the page: page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb flags: 0x0() raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000 page dumped because: kasan: bad access detected addr c36bba90 is located in stack of task cat/163 at offset 48 in frame: stack_trace_save+0x0/0xb4 this frame has 1 object: [32, 48) 'trace' Memory state around the buggy address: c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00 c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 >c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== There is a same issue on x86 and has been resolved by the commit f7d27c3 ("x86/mm, kasan: Silence KASAN warnings in get_wchan()"). The solution could be applied to arm architecture too. Signed-off-by: Lin Yujun <linyujun809@huawei.com> Reported-by: He Ying <heying24@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
otavio
pushed a commit
that referenced
this pull request
Oct 4, 2022
…sion-40.- [reg]: Roll back to revision #40.[Yandong] Signed-off-by: Ke Feng <ke.feng@verisilicon.com> Signed-off-by: yuan.tian <yuan.tian@nxp.com>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Mar 11, 2023
[ Upstream commit 1596dae ] Xsk Tx can be triggered via either sendmsg() or poll() syscalls. These two paths share a call to common function xsk_xmit() which has two sanity checks within. A pseudo code example to show the two paths: __xsk_sendmsg() : xsk_poll(): if (unlikely(!xsk_is_bound(xs))) if (unlikely(!xsk_is_bound(xs))) return -ENXIO; return mask; if (unlikely(need_wait)) (...) return -EOPNOTSUPP; xsk_xmit() mark napi id (...) xsk_xmit() xsk_xmit(): if (unlikely(!(xs->dev->flags & IFF_UP))) return -ENETDOWN; if (unlikely(!xs->tx)) return -ENOBUFS; As it can be observed above, in sendmsg() napi id can be marked on interface that was not brought up and this causes a NULL ptr dereference: [31757.505631] BUG: kernel NULL pointer dereference, address: 0000000000000018 [31757.512710] #PF: supervisor read access in kernel mode [31757.517936] #PF: error_code(0x0000) - not-present page [31757.523149] PGD 0 P4D 0 [31757.525726] Oops: 0000 [Freescale#1] PREEMPT SMP NOPTI [31757.530154] CPU: 26 PID: 95641 Comm: xdpsock Not tainted 6.2.0-rc5+ Freescale#40 [31757.536871] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [31757.547457] RIP: 0010:xsk_sendmsg+0xde/0x180 [31757.551799] Code: 00 75 a2 48 8b 00 a8 04 75 9b 84 d2 74 69 8b 85 14 01 00 00 85 c0 75 1b 48 8b 85 28 03 00 00 48 8b 80 98 00 00 00 48 8b 40 20 <8b> 40 18 89 85 14 01 00 00 8b bd 14 01 00 00 81 ff 00 01 00 00 0f [31757.570840] RSP: 0018:ffffc90034f27dc0 EFLAGS: 00010246 [31757.576143] RAX: 0000000000000000 RBX: ffffc90034f27e18 RCX: 0000000000000000 [31757.583389] RDX: 0000000000000001 RSI: ffffc90034f27e18 RDI: ffff88984cf3c100 [31757.590631] RBP: ffff88984714a800 R08: ffff88984714a800 R09: 0000000000000000 [31757.597877] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffa [31757.605123] R13: 0000000000000000 R14: 0000000000000003 R15: 0000000000000000 [31757.612364] FS: 00007fb4c5931180(0000) GS:ffff88afdfa00000(0000) knlGS:0000000000000000 [31757.620571] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [31757.626406] CR2: 0000000000000018 CR3: 000000184b41c003 CR4: 00000000007706e0 [31757.633648] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [31757.640894] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [31757.648139] PKRU: 55555554 [31757.650894] Call Trace: [31757.653385] <TASK> [31757.655524] sock_sendmsg+0x8f/0xa0 [31757.659077] ? sockfd_lookup_light+0x12/0x70 [31757.663416] __sys_sendto+0xfc/0x170 [31757.667051] ? do_sched_setscheduler+0xdb/0x1b0 [31757.671658] __x64_sys_sendto+0x20/0x30 [31757.675557] do_syscall_64+0x38/0x90 [31757.679197] entry_SYSCALL_64_after_hwframe+0x72/0xdc [31757.687969] Code: 8e f6 ff 44 8b 4c 24 2c 4c 8b 44 24 20 41 89 c4 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 3a 44 89 e7 48 89 44 24 08 e8 b5 8e f6 ff 48 [31757.707007] RSP: 002b:00007ffd49c73c70 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [31757.714694] RAX: ffffffffffffffda RBX: 000055a996565380 RCX: 00007fb4c5727c16 [31757.721939] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 [31757.729184] RBP: 0000000000000040 R08: 0000000000000000 R09: 0000000000000000 [31757.736429] R10: 0000000000000040 R11: 0000000000000293 R12: 0000000000000000 [31757.743673] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [31757.754940] </TASK> To fix this, let's make xsk_xmit a function that will be responsible for generic Tx, where RCU is handled accordingly and pull out sanity checks and xs->zc handling. Populate sanity checks to __xsk_sendmsg() and xsk_poll(). Fixes: ca2e1a6 ("xsk: Mark napi_id on sendmsg()") Fixes: 18b1ab7 ("xsk: Fix race at socket teardown") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230215143309.13145-1-maciej.fijalkowski@intel.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
otavio
pushed a commit
that referenced
this pull request
Jun 6, 2024
commit 1e56086 upstream. A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71a ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7 [bhelgaas: backported to v6.6.y, which contains 8cc22ba ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()""), a backport of f93e71a. This omits the drivers/pci/controller/dwc/pcie-qcom.c hunk that updates qcom_pcie_enable_aspm(), which was added by 9f4f3df ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops"), which is not present in v6.6.28.] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This is the 4.9.144 stable release.