4.19.x+fslc: upgrade 4.19.50 -> 4.19.56 #49

schnitzeltony · 2019-07-03T13:17:34Z

No new runtime issues / no merge conflict

[ Upstream commit 4d8e3e9 ] During early system resume on Exynos5422 with performance counters enabled the following kernel oops happens: Internal error: Oops - undefined instruction: 0 [Freescale#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1433 Comm: bash Tainted: G W 5.0.0-rc5-next-20190208-00023-gd5fb5a8a13e6-dirty #5480 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) ... Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4451006a DAC: 00000051 Process bash (pid: 1433, stack limit = 0xb7e0e22f) ... (reset_ctrl_regs) from [<c0112ad0>] (dbg_cpu_pm_notify+0x1c/0x24) (dbg_cpu_pm_notify) from [<c014c840>] (notifier_call_chain+0x44/0x84) (notifier_call_chain) from [<c014cbc0>] (__atomic_notifier_call_chain+0x7c/0x128) (__atomic_notifier_call_chain) from [<c01ffaac>] (cpu_pm_notify+0x30/0x54) (cpu_pm_notify) from [<c055116c>] (syscore_resume+0x98/0x3f4) (syscore_resume) from [<c0189350>] (suspend_devices_and_enter+0x97c/0xe74) (suspend_devices_and_enter) from [<c0189fb8>] (pm_suspend+0x770/0xc04) (pm_suspend) from [<c0187740>] (state_store+0x6c/0xcc) (state_store) from [<c09fa698>] (kobj_attr_store+0x14/0x20) (kobj_attr_store) from [<c030159c>] (sysfs_kf_write+0x4c/0x50) (sysfs_kf_write) from [<c0300620>] (kernfs_fop_write+0xfc/0x1e0) (kernfs_fop_write) from [<c0282be8>] (__vfs_write+0x2c/0x160) (__vfs_write) from [<c0282ea4>] (vfs_write+0xa4/0x16c) (vfs_write) from [<c0283080>] (ksys_write+0x40/0x8c) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Undefined instruction is triggered during CP14 reset, because bits: Freescale#16 (Secure privileged invasive debug disabled) and Freescale#17 (Secure privileged noninvasive debug disable) are set in DSCR. Those bits depend on SPNIDEN and SPIDEN lines, which are provided by Secure JTAG hardware block. That block in turn is powered from cluster 0 (big/Eagle), but the Exynos5422 boots on cluster 1 (LITTLE/KFC). To fix this issue it is enough to turn on the power on the cluster 0 for a while. This lets the Secure JTAG block to propagate the needed signals to LITTLE/KFC cores and change their DSCR. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 32a155b ] The datasheet says the vconn MUST be off when we start toggling. The tcpm.c state-machine is responsible to make sure vconn is off, but lets add a WARN to catch any cases where vconn is not off for some reason. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 15160f6 ] The Product Register of R-Car M3-W ES1.3 incorrectly identifies the SoC revision as ES2.1. Add a workaround to fix this. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 338aa10 ] Fix the warning produced by gpiochip_set_irq_hooks() by allocating a dedicated IRQ chip per GPIO chip/port. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8c43004 ] pcpu_find_block_fit() guarantees that a fit is found within PCPU_BITMAP_BLOCK_BITS. Iteration is used to determine the first fit as it compares against the block's contig_hint. This can lead to incorrectly scanning past the end of the bitmap. The behavior was okay given the check after for bit_off >= end and the correctness of the hints from pcpu_find_block_fit(). This patch fixes this by bounding the end offset by the number of bits in a chunk. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…R connections" This reverts commit 38f092c which is commit d5bb334 upstream. Lots of people have reported issues with this patch, and as there does not seem to be a fix going into Linus's kernel tree any time soon, revert the commit in the stable trees so as to get people's machines working properly again. Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Jeremy Cline <jeremy@jcline.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…ntexts. (v3)" This reverts commit 6103823 which is commit b30a43a upstream. Sven reports: Commit 1e07d63 ("drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)") has caused a build failure for me when I actually tried that option (CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n): ,---- | Kernel: arch/x86/boot/bzImage is ready (Freescale#1) | Building modules, stage 2. | MODPOST 290 modules | ERROR: "drm_legacy_mmap" [drivers/gpu/drm/nouveau/nouveau.ko] undefined! | scripts/Makefile.modpost:91: recipe for target '__modpost' failed `---- Upstream does not have that problem, as commit bed2dd8 ("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()") has removed the use of drm_legacy_mmap from nouveau_ttm.c. Unfortunately that commit does not apply in 5.1.9. The ensuing discussion proposed a number of one-off patches, but no solid agreement was made, so just revert the commit for now to get people's systems building again. Reported-by: Sven Joachim <svenjoac@gmx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 98487de upstream. We found that it return success when we set IMMUTABLE_FL flag to a file in docker even though the docker didn't have the capability CAP_LINUX_IMMUTABLE. The commit d1d04ef ("ovl: stack file ops") and dab5ca8 ("ovl: add lsattr/chattr support") implemented chattr operations on a regular overlay file. ovl_real_ioctl() overridden the current process's subjective credentials with ofs->creator_cred which have the capability CAP_LINUX_IMMUTABLE so that it will return success in vfs_ioctl()->cap_capable(). Fix this by checking the capability before cred overridden. And here we only care about APPEND_FL and IMMUTABLE_FL, so get these information from inode. [SzM: move check and call to underlying fs inside inode locked region to prevent two such calls from racing with each other] Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e46b84 upstream. Overlay file f_pos is the master copy that is preserved through copy up and modified on read/write, but only real fs knows how to SEEK_HOLE/SEEK_DATA and real fs may impose limitations that are more strict than ->s_maxbytes for specific files, so we use the real file to perform seeks. We do not call real fs for SEEK_CUR:0 query and for SEEK_SET:0 requests. Fixes: d1d04ef ("ovl: stack file ops") Reported-by: Eddie Horng <eddiehorng.tw@gmail.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c16b855 upstream. Async update callbacks are expected to set the old_fb in the new_state so prepare/cleanup framebuffers are balanced. Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new fb and put the old fb) is not required, as it's taken care by drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane(). Cc: <stable@vger.kernel.org> # v4.19+ Fixes: 539c320 ("drm/vc4: update cursors asynchronously through atomic") Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-5-helen.koike@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7c32ae3 upstream. The call of unsubscribe_port() which manages the group count and module refcount from delete_and_unsubscribe_port() looks racy; it's not covered by the group list lock, and it's likely a cause of the reported unbalance at port deletion. Let's move the call inside the group list_mutex to plug the hole. Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3b4929f upstream. Jonathan Looney reported that TCP can trigger the following crash in tcp_shifted_skb() : BUG_ON(tcp_skb_pcount(skb) < pcount); This can happen if the remote peer has advertized the smallest MSS that linux TCP accepts : 48 An skb can hold 17 fragments, and each fragment can hold 32KB on x86, or 64KB on PowerPC. This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs can overflow. Note that tcp_sendmsg() builds skbs with less than 64KB of payload, so this problem needs SACK to be enabled. SACK blocks allow TCP to coalesce multiple skbs in the retransmit queue, thus filling the 17 fragments to maximal capacity. CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs Fixes: 832d11c ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f070ef2 upstream. Jonathan Looney reported that a malicious peer can force a sender to fragment its retransmit queue into tiny skbs, inflating memory usage and/or overflow 32bit counters. TCP allows an application to queue up to sk_sndbuf bytes, so we need to give some allowance for non malicious splitting of retransmit queue. A new SNMP counter is added to monitor how many times TCP did not allow to split an skb if the allowance was exceeded. Note that this counter might increase in the case applications use SO_SNDBUF socket option to lower sk_sndbuf. CVE-2019-11478 : tcp_fragment, prevent fragmenting a packet when the socket is already using more than half the allowed space Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5f3e2bf upstream. Some TCP peers announce a very small MSS option in their SYN and/or SYN/ACK messages. This forces the stack to send packets with a very high network/cpu overhead. Linux has enforced a minimal value of 48. Since this value includes the size of TCP options, and that the options can consume up to 40 bytes, this means that each segment can include only 8 bytes of payload. In some cases, it can be useful to increase the minimal value to a saner value. We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility reasons. Note that TCP_MAXSEG socket option enforces a minimal value of (TCP_MIN_MSS). David Miller increased this minimal value in commit c39508d ("tcp: Make TCP_MAXSEG minimum more correct.") from 64 to 88. We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS. CVE-2019-11479 -- tcp mss hardcoded to 48 Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 967c05a upstream. If mtu probing is enabled tcp_mtu_probing() could very well end up with a too small MSS. Use the new sysctl tcp_min_snd_mss to make sure MSS search is performed in an acceptable range. CVE-2019-11479 -- tcp mss hardcoded to 48 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…(v3) commit b30a43a upstream. There was a nouveau DDX that relied on legacy context ioctls to work, but we fixed it years ago, give distros that have a modern DDX the option to break the uAPI and close the mess of holes that legacy context support is. Full context of the story: commit 0e97598 Author: Peter Antoine <peter.antoine@intel.com> Date: Tue Jun 23 08:18:49 2015 +0100 drm: Turn off Legacy Context Functions The context functions are not used by the i915 driver and should not be used by modeset drivers. These driver functions contain several bugs and security holes. This change makes these functions optional can be turned on by a setting, they are turned off by default for modeset driver with the exception of the nouvea driver that may require them with an old version of libdrm. The previous attempt was commit 7c51013 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Aug 8 15:41:21 2013 +0200 drm: mark context support as a legacy subsystem but this had to be reverted commit c21eb21 Author: Dave Airlie <airlied@redhat.com> Date: Fri Sep 20 08:32:59 2013 +1000 Revert "drm: mark context support as a legacy subsystem" v2: remove returns from void function, and formatting (Daniel Vetter) v3: - s/Nova/nouveau/ in the commit message, and add references to the previous attempts - drop the part touching the drm hw lock, that should be a separate patch. Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2) Cc: Peter Antoine <peter.antoine@intel.com> (v2) Reviewed-by: Peter Antoine <peter.antoine@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> v2: move DRM_VM dependency into legacy config. v3: fix missing dep (kbuild robot) Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Not-entirely-upstream-sha1-but-equivalent: bed2dd8 ("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()") Setting CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n (added by commit: b30a43a) causes the build to fail with: ERROR: "drm_legacy_mmap" [drivers/gpu/drm/nouveau/nouveau.ko] undefined! This does not happend upstream as the offending code got removed in: bed2dd8 ("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()") Fix that by adding check for CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT around the drm_legacy_mmap() call. Also, as Sven Joachim pointed out, we need to make the check in CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n case return -EINVAL as its done for basically all other gpu drivers, especially in upstream kernels drivers/gpu/drm/ttm/ttm_bo_vm.c as of the upstream commit bed2dd8. NOTE. This is a minimal stable-only fix for trees where b30a43a is backported as the build error affects nouveau only. Fixes: b30a43a ("drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)") Signed-off-by: Thomas Backlund <tmb@mageia.org> Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 81bcbad upstream. Since kernel v5.0, one single win8 touchscreen device failed. And it turns out this is because it reports 2 InRange usage per touch. It's a first, and I *really* wonder how this was allowed by Microsoft in the first place. But IIRC, Breno told me this happened *after* a firmware upgrade... Anyway, better be safe for those crappy devices, and make sure we have a full slot before jumping to the next. This won't prevent all crappy devices to fail here, but at least we will have a safeguard as long as the contact ID and the X and Y coordinates are placed in the report after the grabage. Fixes: 01eaac7 ("HID: multitouch: remove one copy of values") CC: stable@vger.kernel.org # v5.0+ Reported-and-tested-by: Breno Leitao <leitao@debian.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2cc0880 upstream. The serial number and tool type information that is reported by the tablet while a pen is merely "in prox" instead of fully "in range" can be stale and cause us to report incorrect tool information. Serial number, tool type, and other information is only valid once the pen comes fully in range so we should be careful to not use this information until that point. In particular, this issue may cause the driver to incorectly report BTN_TOOL_RUBBER after switching from the eraser tool back to the pen. Fixes: a48324d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e92a7be upstream. If the tool spends some time in prox before entering range, a series of events (e.g. ABS_DISTANCE, MSC_SERIAL) can be sent before we or userspace have any clue about the pen whose data is being reported. We need to hold off on reporting anything until the pen has entered range. Since we still want to report events that occur "in prox" after the pen has *left* range we use 'wacom-tool[0]' as the indicator that the pen did at one point enter range and provide us/userspace with tool type and serial number information. Fixes: a48324d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fe7f8d7 upstream. The Bluetooth reports from the 2nd-gen Intuos Pro have separate bits for indicating if the tip or eraser is in contact with the tablet. At the moment, only the tip contact bit controls the state of the BTN_TOUCH event. This prevents the eraser from working as expected. This commit changes the driver to send BTN_TOUCH whenever either the tip or eraser contact bit is set. Fixes: 4922cd2 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6441fc7 upstream. The button numbering of the 2nd-gen Intuos Pro is not consistent between the USB and Bluetooth interfaces. Over USB, the HID_GENERIC codepath enumerates the eight ExpressKeys first (BTN_0 - BTN_7) followed by the center modeswitch button (BTN_8). The Bluetooth codepath, however, has the center modeswitch button as BTN_0 and the the eight ExpressKeys as BTN_1 - BTN_8. To ensure userspace button mappings do not change depending on how the tablet is connected, modify the Bluetooth codepath to report buttons in the same order as USB. To ensure the mode switch LED continues to toggle in response to the mode switch button, the `wacom_is_led_toggled` function also requires a small update. Link: linuxwacom/input-wacom#79 Fixes: 4922cd2 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 69dbdff upstream. The Bluetooth interface of the 2nd-gen Intuos Pro batches together four independent "frames" of finger data into a single report. Each frame is essentially equivalent to a single USB report, with the up-to-10 fingers worth of information being spread across two frames. At the moment the driver only calls `input_sync` after processing all four frames have been processed, which can result in the driver sending multiple updates for a single slot within the same SYN_REPORT. This can confuse userspace, so modify the driver to sync more often if necessary (i.e., after reporting the state of all fingers). Fixes: 4922cd2 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…aptops" commit 17d3046 upstream. This reverts commit 9cb40eb. This patch introduces noise and headphone playback issue after rebooting or suspending/resuming. Let us revert it. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203831 Fixes: 9cb40eb ("ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops") Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d8fa87c upstream. Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear Audio data channels, therefore it allows software to capture PCM substream. However, ALSA oxfw driver doesn't. This commit changes the driver to add one PCM substream for capture direction. Fixes: de5126c ("ALSA: oxfw: add stream format quirk for SCS.1 models") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 717f43d upstream. ALC255 and ALC256 were some difference for hidden register. This update was suitable for ALC256. Fixes: e69e7e0 ("ALSA: hda/realtek - ALC256 speaker noise issue") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0e3fb69 upstream. The data for isochronous resources is not destroyed in expected place. This commit fixes the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 9b2bb4f ("ALSA: firewire-motu: add stream management functionality") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 31f6264 upstream. We've received a bugreport that using LPM with ST1000LM024 drives leads to system lockups. So it seems that these models are buggy in more then 1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330 Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…tions commit d5bb334 upstream. The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 693cd8c upstream. When trying to align the minimum encryption key size requirement for Bluetooth connections, it turns out doing this in a central location in the HCI connection handling code is not possible. Original Bluetooth version up to 2.0 used a security model where the L2CAP service would enforce authentication and encryption. Starting with Bluetooth 2.1 and Secure Simple Pairing that model has changed into that the connection initiator is responsible for providing an encrypted ACL link before any L2CAP communication can happen. Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and before devices are causing a regression. The encryption key size check needs to be moved out of the HCI connection handling into the L2CAP channel setup. To achieve this, the current check inside hci_conn_security() has been moved into l2cap_check_enc_key_size() helper function and then called from four decisions point inside L2CAP to cover all combinations of Secure Simple Pairing enabled devices and device using legacy pairing and legacy service security model. Fixes: d5bb334 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643 Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d526d6 upstream. Some servers such as Windows 10 will return STATUS_INSUFFICIENT_RESOURCES as the number of simultaneous SMB3 requests grows (even though the client has sufficient credits). Return EAGAIN on STATUS_INSUFFICIENT_RESOURCES so that we can retry writes which fail with this status code. This (for example) fixes large file copies to Windows 10 on fast networks. Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4f488fb upstream. In wiphy_new_nm(), if an error occurs after dev_set_name() and device_initialize() have already been called, it's necessary to call put_device() (via wiphy_free()) to avoid a memory leak. Reported-by: syzbot+7fddca22578bc67c3fe4@syzkaller.appspotmail.com Fixes: 1f87f7d ("cfg80211: add rfkill support") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 588f7d3 upstream. When receiving a robust management frame, drop it if we don't have rx->sta since then we don't have a security association and thus couldn't possibly validate the frame. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 33d915d upstream. As per the current design, in the case of sw crypto controlled devices, it is the device which advertises the support for AP/VLAN iftype based on it's ability to tranmsit packets encrypted in software (In VLAN functionality, group traffic generated for a specific VLAN group is always encrypted in software). Commit db3bdcb ("mac80211: allow AP_VLAN operation on crypto controlled devices") has introduced this change. Since 4addr AP operation also uses AP/VLAN iftype, this conditional way of advertising AP/VLAN support has broken 4addr AP mode operation on crypto controlled devices which do not support VLAN functionality. In the case of ath10k driver, not all firmwares have support for VLAN functionality but all can support 4addr AP operation. Because AP/VLAN support is not advertised for these devices, 4addr AP operations are also blocked. Fix this by allowing 4addr operation on devices which do not support AP/VLAN iftype but can support 4addr AP operation (decision is based on the wiphy flag WIPHY_FLAG_4ADDR_AP). Cc: stable@vger.kernel.org Fixes: db3bdcb ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 79c92ca upstream. When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled. Without this change, a TDLS issue can be reproduced by following the steps as below: 1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2. 2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link. 3. Repeat step Freescale#2 and monitor the connection between STA and AP. During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which means: Class 2/3 frame received from nonassociated STA. On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP. Cc: stable@vger.kernel.org Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f77bf48 upstream. When dumping stations, memory allocated for station_info's pertid member will leak if the nl80211 header cannot be added to the sk_buff due to insufficient tail room. I noticed this leak in the kmalloc-2048 cache. Cc: stable@vger.kernel.org Fixes: 8689c05 ("cfg80211: dynamically allocate per-tid stats for station info") Signed-off-by: Andy Strohman <andy@uplevelsystems.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a71fd9d upstream. ieee80211_aes_gmac() uses the mic argument directly in sg_set_buf() and that does not allow use of stack memory (e.g., BUG_ON() is hit in sg_set_buf() with CONFIG_DEBUG_SG). BIP GMAC TX side is fine for this since it can use the skb data buffer, but the RX side was using a stack variable for deriving the local MIC value to compare against the received one. Fix this by allocating heap memory for the mic buffer. This was found with hwsim test case ap_cipher_bip_gmac_128 hitting that BUG_ON() and kernel panic. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 87d3aa2 upstream. When a new control group is created __init_one_rdt_domain() walks all the other closids to calculate the sets of used and unused bits. If it discovers a pseudo_locksetup group, it breaks out of the loop. This means any later closid doesn't get its used bits added to used_b. These bits will then get set in unused_b, and added to the new control group's configuration, even if they were marked as exclusive for a later closid. When encountering a pseudo_locksetup group, we should continue. This is because "a resource group enters 'pseudo-locked' mode after the schemata is written while the resource group is in 'pseudo-locksetup' mode." When we find a pseudo_locksetup group, its configuration is expected to be overwritten, we can skip it. Fixes: dfe9674 ("x86/intel_rdt: Enable entering of pseudo-locksetup mode") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H Peter Avin <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20190603172531.178830-1-james.morse@arm.com [Dropped comment due to lack of space] Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ca72d88 upstream. When using the Hash Page Table (HPT) MMU, userspace memory mappings are managed at two levels. Firstly in the Linux page tables, much like other architectures, and secondly in the SLB (Segment Lookaside Buffer) and HPT. It's the SLB and HPT that are actually used by the hardware to do translations. As part of the series adding support for 4PB user virtual address space using the hash MMU, we added support for allocating multiple "context ids" per process, one for each 512TB chunk of address space. These are tracked in an array called extended_id in the mm_context_t of a process that has done a mapping above 512TB. If such a process forks (ie. clone(2) without CLONE_VM set) it's mm is copied, including the mm_context_t, and then init_new_context() is called to reinitialise parts of the mm_context_t as appropriate to separate the address spaces of the two processes. The key step in ensuring the two processes have separate address spaces is to allocate a new context id for the process, this is done at the beginning of hash__init_new_context(). If we didn't allocate a new context id then the two processes would share mappings as far as the SLB and HPT are concerned, even though their Linux page tables would be separate. For mappings above 512TB, which use the extended_id array, we neglected to allocate new context ids on fork, meaning the parent and child use the same ids and therefore share those mappings even though they're supposed to be separate. This can lead to the parent seeing writes done by the child, which is essentially memory corruption. There is an additional exposure which is that if the child process exits, all its context ids are freed, including the context ids that are still in use by the parent for mappings above 512TB. One or more of those ids can then be reallocated to a third process, that process can then read/write to the parent's mappings above 512TB. Additionally if the freed id is used for the third process's primary context id, then the parent is able to read/write to the third process's mappings *below* 512TB. All of these are fundamental failures to enforce separation between processes. The only mitigating factor is that the bug only occurs if a process creates mappings above 512TB, and most applications still do not create such mappings. Only machines using the hash page table MMU are affected, eg. PowerPC 970 (G5), PA6T, Power5/6/7/8/9. By default Power9 bare metal machines (powernv) use the Radix MMU and are not affected, unless the machine has been explicitly booted in HPT mode (using disable_radix on the kernel command line). KVM guests on Power9 may be affected if the host or guest is configured to use the HPT MMU. LPARs under PowerVM on Power9 are affected as they always use the HPT MMU. Kernels built with PAGE_SIZE=4K are not affected. The fix is relatively simple, we need to reallocate context ids for all extended mappings on fork. Fixes: f384796 ("powerpc/mm: Add support for handling > 512TB address in SLB miss") Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the 4.19.56 stable release

[ Upstream commit e198987 ] gtp_encap_enable_socket() and gtp_encap_destroy() are not protected by rcu_read_lock(). and it's not safe to write sk->sk_user_data. This patch make these functions to use lock_sock() instead of rcu_dereference_sk_user_data(). Test commands: gtp-link add gtp1 Splat looks like: [ 83.238315] ============================= [ 83.239127] WARNING: suspicious RCU usage [ 83.239702] 5.2.0-rc6+ Freescale#49 Not tainted [ 83.240268] ----------------------------- [ 83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage! [ 83.243828] [ 83.243828] other info that might help us debug this: [ 83.243828] [ 83.246325] [ 83.246325] rcu_scheduler_active = 2, debug_locks = 1 [ 83.247314] 1 lock held by gtp-link/1008: [ 83.248523] #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0 [ 83.251503] [ 83.251503] stack backtrace: [ 83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ Freescale#49 [ 83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 83.254562] Call Trace: [ 83.254995] dump_stack+0x7c/0xbb [ 83.255567] gtp_encap_enable_socket+0x2df/0x360 [gtp] [ 83.256415] ? gtp_find_dev+0x1a0/0x1a0 [gtp] [ 83.257161] ? memset+0x1f/0x40 [ 83.257843] gtp_newlink+0x90/0xa21 [gtp] [ 83.258497] ? __netlink_ns_capable+0xc3/0xf0 [ 83.259260] __rtnl_newlink+0xb9f/0x11b0 [ 83.260022] ? rtnl_link_unregister+0x230/0x230 [ ... ] Fixes: 1e3a3ab ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

…LAG_DETACH is set commit 8305f72 upstream. During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE Freescale#49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…LAG_DETACH is set commit 8305f72 upstream. During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fe8d33b upstream. Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: WARNING: CPU: 1 PID: 20 at kernel/dma/debug.c:500 add_dma_entry+0x16c/0x17c DMA-API: exceeded 7 overlapping mappings of cacheline 0x031d2645 Modules linked in: CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 5.5.0-rc2-00021-gdeda30999c2b-dirty Freescale#49 Hardware name: STM32 (Device Tree Support) Workqueue: events_freezable mmc_rescan [<c03138c0>] (unwind_backtrace) from [<c030d760>] (show_stack+0x10/0x14) [<c030d760>] (show_stack) from [<c0f2eb28>] (dump_stack+0xc0/0xd4) [<c0f2eb28>] (dump_stack) from [<c034a14c>] (__warn+0xd0/0xf8) [<c034a14c>] (__warn) from [<c034a530>] (warn_slowpath_fmt+0x94/0xb8) [<c034a530>] (warn_slowpath_fmt) from [<c03bca0c>] (add_dma_entry+0x16c/0x17c) [<c03bca0c>] (add_dma_entry) from [<c03bdf54>] (debug_dma_map_sg+0xe4/0x3d4) [<c03bdf54>] (debug_dma_map_sg) from [<c0d09244>] (sdmmc_idma_prep_data+0x94/0xf8) [<c0d09244>] (sdmmc_idma_prep_data) from [<c0d05a2c>] (mmci_prep_data+0x2c/0xb0) [<c0d05a2c>] (mmci_prep_data) from [<c0d073ec>] (mmci_start_data+0x134/0x2f0) [<c0d073ec>] (mmci_start_data) from [<c0d078d0>] (mmci_request+0xe8/0x154) [<c0d078d0>] (mmci_request) from [<c0cecb44>] (mmc_start_request+0x94/0xbc) DMA api debug brings to light leaking dma-mappings, dma_map_sg and dma_unmap_sg are not correctly balanced. If a request is prepared, the dma_map/unmap are done in asynchronous call pre_req (prep_data) and post_req (unprep_data). In this case the dma-mapping is right balanced. But if the request was not prepared, the data->host_cookie is define to zero and the dma_map/unmap must be done in the request. The dma_map is called by mmci_dma_start (prep_data), but there is no dma_unmap in this case. This patch adds dma_unmap_sg when the dma is finalized and the data cookie is zero (request not prepared). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200526155103.12514-2-ludovic.barre@st.com Fixes: 46b723d ("mmc: mmci: add stm32 sdmmc variant") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…LAG_DETACH is set commit 8305f72 upstream. During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE Freescale#49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== Freescale#45: core_reloc: insn Freescale#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 Freescale#46: core_reloc: insn Freescale#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#47: core_reloc: insn Freescale#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#48: core_reloc: insn Freescale#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#49: core_reloc: insn Freescale#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== Freescale#30: core_reloc: insn Freescale#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#31: core_reloc: insn Freescale#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... Freescale#26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 Freescale#27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 Freescale#28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... Freescale#40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... Freescale#44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 Freescale#45 0x00007f8990968b85 in __getgrnam_r [...] Freescale#46 0x00007f89909d6b77 in grantpt [...] Freescale#47 0x00007f8990a9394e in __GI_openpty [...] Freescale#48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 Freescale#49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 Freescale#50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 Freescale#51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 Freescale#52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>

When FSPI running in octal ddr mode, it won't access the odd start address A, but to access the previous 2 byte aligned start address A-1, when access the nor chip via IPS. The code change fix the issue and tested with mt35xu512aba, which is 128K erase size and easy to trigger the issue when running UBIFS test. After enabled the OCTAL DDR mode for i.MX8DXL, found kernel dump during UBIFS bonnie++ test, at the step of mounting. the error logs are as followings: Volume ID 0, size 508 LEBs (66519552 bytes, 63.4 MiB), LEB size 130944 bytes (127.8 KiB), dynamic, name "test", alignment 1 [ 168.170373] UBIFS (ubi0:0): default file-system created [ 168.181626] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 168.189532] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 387 [ 168.244961] UBIFS error (ubi0:0 pid 386): check_lpt_type.constprop.22: invalid type (4) in LPT node type 2 [ 168.254733] CPU: 0 PID: 386 Comm: mount Not tainted 5.10.72-01963-g6f6d787f2e3-dirty Freescale#49 [ 168.262826] Hardware name: Freescale i.MX8DXL EVK (DT) [ 168.267970] Call trace: [ 168.270427] dump_backtrace+0x0/0x1c0 [ 168.274097] show_stack+0x18/0x68 [ 168.277414] dump_stack+0xd8/0x134 [ 168.280822] check_lpt_type.constprop.22+0x58/0x60 [ 168.285614] ubifs_lpt_init+0x37c/0x558 [ 168.289456] ubifs_mount+0xee8/0x13b8 [ 168.293123] legacy_get_tree+0x30/0x60 [ 168.296874] vfs_get_tree+0x2c/0x118 [ 168.300455] path_mount+0x744/0x9b0 [ 168.303944] do_mount+0x9c/0xb8 [ 168.307090] __arm64_sys_mount+0x12c/0x2a0 [ 168.311194] el0_svc_common.constprop.4+0x68/0x188 [ 168.315987] do_el0_svc+0x24/0x90 [ 168.319307] el0_svc+0x14/0x20 [ 168.322364] el0_sync_handler+0x90/0xb8 [ 168.326203] el0_sync+0x160/0x180 [ 168.330403] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops mount: /home/root/tmp: wrong fs type, bad option, bad superblock on ubi0:test, missing codepage or helper program, or other er. After debugging the UBIFS lpt code, found it accesses the nor chip from an odd address, such as address A, but FSPI controller force to read from 2 byte aligned address A-1, so it can't read the correct data and causes UBIFS mount failed. This should be a common issue but not found on i.MX8ULP, becuase the ubifs_info pnode_sz is an even number due to the chip mounted on i.MX8ULP is a 64K erase size macronix nor chip, the 128K erase size micron nor chip on i.MX8DXL can easily trigger the issue. The code change can fix the read on odd address issue but it's still a workaround. There are some cases can NOT be fixed, theoretically. For instance, read CR register in OCTAL DTR mode with odd address. Since the nor chip can only outputs the same bytes repeatedly when continuously read, so there is no SW workaround, but we haven't seen any real cases till now. Signed-off-by: Han Xu <han.xu@nxp.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit c308e9e ] SMCRv1 has a similar issue to SMCRv2 (see link below) that may access invalid MRs of RMBs when construct LLC ADD LINK CONT messages. BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [Freescale#1] PREEMPT SMP PTI CPU: 5 PID: 48 Comm: kworker/5:0 Kdump: loaded Tainted: G W E 6.4.0-rc3+ Freescale#49 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_add_link_cont+0x160/0x270 [smc] RSP: 0018:ffffa737801d3d50 EFLAGS: 00010286 RAX: ffff964f82144000 RBX: ffffa737801d3dd8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff964f81370c30 RBP: ffffa737801d3dd4 R08: ffff964f81370000 R09: ffffa737801d3db0 R10: 0000000000000001 R11: 0000000000000060 R12: ffff964f82e70000 R13: ffff964f81370c38 R14: ffffa737801d3dd3 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff9652bfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000008fa20004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_srv_rkey_exchange+0xa7/0x190 [smc] smc_llc_srv_add_link+0x3ae/0x5a0 [smc] smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into LLC messages. For SMCRv1, they are ADD LINK CONT messages. However smc_llc_add_link_cont() may mistakenly access to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes it. Fixes: 87f88cd ("net/smc: rkey processing for a new link as SMC client") Link: https://lore.kernel.org/r/1685101741-74826-3-git-send-email-guwen@linux.alibaba.com Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ Freescale#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> Freescale#1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ #49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7afb867 upstream. open_cached_dir() may either race with the tcon reconnection even before compound_send_recv() or directly trigger a reconnection via SMB2_open_init() or SMB_query_info_init(). The reconnection process invokes invalidate_all_cached_dirs() via cifs_mark_open_files_invalid(), which removes all cfids from the cfids->entries list but doesn't drop a ref if has_lease isn't true. This results in the currently-being-constructed cfid not being on the list, but still having a refcount of 2. It leaks if returned from open_cached_dir(). Fix this by setting cfid->has_lease when the ref is actually taken; the cfid will not be used by other threads until it has a valid time. Addresses these kmemleaks: unreferenced object 0xffff8881090c4000 (size 1024): comm "bash", pid 1860, jiffies 4295126592 hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 00 ca 45 22 81 88 ff ff f8 dc 4f 04 81 88 ff ff ..E"......O..... backtrace (crc 6f58c20f): [<ffffffff8b895a1e>] __kmalloc_cache_noprof+0x2be/0x350 [<ffffffff8bda06e3>] open_cached_dir+0x993/0x1fb0 [<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50 [<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0 [<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200 [<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0 [<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e unreferenced object 0xffff8881044fdcf8 (size 8): comm "bash", pid 1860, jiffies 4295126592 hex dump (first 8 bytes): 00 cc cc cc cc cc cc cc ........ backtrace (crc 10c106a9): [<ffffffff8b89a3d3>] __kmalloc_node_track_caller_noprof+0x363/0x480 [<ffffffff8b7d7256>] kstrdup+0x36/0x60 [<ffffffff8bda0700>] open_cached_dir+0x9b0/0x1fb0 [<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50 [<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0 [<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200 [<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0 [<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e And addresses these BUG splats when unmounting the SMB filesystem: BUG: Dentry ffff888140590ba0{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs] WARNING: CPU: 3 PID: 3433 at fs/dcache.c:1536 umount_check+0xd0/0x100 Modules linked in: CPU: 3 UID: 0 PID: 3433 Comm: bash Not tainted 6.12.0-rc4-g850925a8133c-dirty #49 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:umount_check+0xd0/0x100 Code: 8d 7c 24 40 e8 31 5a f4 ff 49 8b 54 24 40 41 56 49 89 e9 45 89 e8 48 89 d9 41 57 48 89 de 48 c7 c7 80 e7 db ac e8 f0 72 9a ff <0f> 0b 58 31 c0 5a 5b 5d 41 5c 41 5d 41 5e 41 5f e9 2b e5 5d 01 41 RSP: 0018:ffff88811cc27978 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888140590ba0 RCX: ffffffffaaf20bae RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881f6fb6f40 RBP: ffff8881462ec000 R08: 0000000000000001 R09: ffffed1023984ee3 R10: ffff88811cc2771f R11: 00000000016cfcc0 R12: ffff888134383e08 R13: 0000000000000002 R14: ffff8881462ec668 R15: ffffffffaceab4c0 FS: 00007f23bfa98740(0000) GS:ffff8881f6f80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556de4a6f808 CR3: 0000000123c80000 CR4: 0000000000350ef0 Call Trace: <TASK> d_walk+0x6a/0x530 shrink_dcache_for_umount+0x6a/0x200 generic_shutdown_super+0x52/0x2a0 kill_anon_super+0x22/0x40 cifs_kill_sb+0x159/0x1e0 deactivate_locked_super+0x66/0xe0 cleanup_mnt+0x140/0x210 task_work_run+0xfb/0x170 syscall_exit_to_user_mode+0x29f/0x2b0 do_syscall_64+0xa1/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f23bfb93ae7 Code: ff ff ff ff c3 66 0f 1f 44 00 00 48 8b 0d 11 93 0d 00 f7 d8 64 89 01 b8 ff ff ff ff eb bf 0f 1f 44 00 00 b8 50 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 92 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffee9138598 EFLAGS: 00000246 ORIG_RAX: 0000000000000050 RAX: 0000000000000000 RBX: 0000558f1803e9a0 RCX: 00007f23bfb93ae7 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000558f1803e9a0 RBP: 0000558f1803e600 R08: 0000000000000007 R09: 0000558f17fab610 R10: d91d5ec34ab757b0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 0000000000000015 R15: 0000000000000000 </TASK> irq event stamp: 1163486 hardirqs last enabled at (1163485): [<ffffffffac98d344>] _raw_spin_unlock_irqrestore+0x34/0x60 hardirqs last disabled at (1163486): [<ffffffffac97dcfc>] __schedule+0xc7c/0x19a0 softirqs last enabled at (1163482): [<ffffffffab79a3ee>] __smb_send_rqst+0x3de/0x990 softirqs last disabled at (1163480): [<ffffffffac2314f1>] release_sock+0x21/0xf0 ---[ end trace 0000000000000000 ]--- VFS: Busy inodes after unmount of cifs (cifs) ------------[ cut here ]------------ kernel BUG at fs/super.c:661! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 UID: 0 PID: 3433 Comm: bash Tainted: G W 6.12.0-rc4-g850925a8133c-dirty #49 Tainted: [W]=WARN Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:generic_shutdown_super+0x290/0x2a0 Code: e8 15 7c f7 ff 48 8b 5d 28 48 89 df e8 09 7c f7 ff 48 8b 0b 48 89 ee 48 8d 95 68 06 00 00 48 c7 c7 80 7f db ac e8 00 69 af ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90 90 90 90 90 90 RSP: 0018:ffff88811cc27a50 EFLAGS: 00010246 RAX: 000000000000003e RBX: ffffffffae994420 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffffffffab06180e RDI: ffff8881f6eb18c8 RBP: ffff8881462ec000 R08: 0000000000000001 R09: ffffed103edd6319 R10: ffff8881f6eb18cb R11: 00000000016d3158 R12: ffff8881462ec9c0 R13: ffff8881462ec050 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f23bfa98740(0000) GS:ffff8881f6e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8364005d68 CR3: 0000000123c80000 CR4: 0000000000350ef0 Call Trace: <TASK> kill_anon_super+0x22/0x40 cifs_kill_sb+0x159/0x1e0 deactivate_locked_super+0x66/0xe0 cleanup_mnt+0x140/0x210 task_work_run+0xfb/0x170 syscall_exit_to_user_mode+0x29f/0x2b0 do_syscall_64+0xa1/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f23bfb93ae7 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:generic_shutdown_super+0x290/0x2a0 Code: e8 15 7c f7 ff 48 8b 5d 28 48 89 df e8 09 7c f7 ff 48 8b 0b 48 89 ee 48 8d 95 68 06 00 00 48 c7 c7 80 7f db ac e8 00 69 af ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90 90 90 90 90 90 RSP: 0018:ffff88811cc27a50 EFLAGS: 00010246 RAX: 000000000000003e RBX: ffffffffae994420 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffffffffab06180e RDI: ffff8881f6eb18c8 RBP: ffff8881462ec000 R08: 0000000000000001 R09: ffffed103edd6319 R10: ffff8881f6eb18cb R11: 00000000016d3158 R12: ffff8881462ec9c0 R13: ffff8881462ec050 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f23bfa98740(0000) GS:ffff8881f6e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8364005d68 CR3: 0000000123c80000 CR4: 0000000000350ef0 This reproduces eventually with an SMB mount and two shells running these loops concurrently - while true; do cd ~; sleep 1; for i in {1..3}; do cd /mnt/test/subdir; echo $PWD; sleep 1; cd ..; echo $PWD; sleep 1; done; echo ...; done - while true; do iptables -F OUTPUT; mount -t cifs -a; for _ in {0..2}; do ls /mnt/test/subdir/ | wc -l; done; iptables -I OUTPUT -p tcp --dport 445 -j DROP; sleep 10 echo "unmounting"; umount -l -t cifs -a; echo "done unmounting"; sleep 20 echo "recovering"; iptables -F OUTPUT; sleep 10; done Fixes: ebe98f1 ("cifs: enable caching of directories for which a lease is held") Fixes: 5c86919 ("smb: client: fix use-after-free in smb2_query_info_compound()") Cc: stable@vger.kernel.org Signed-off-by: Paul Aurich <paul@darkrain42.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mszyprow and others added 30 commits June 15, 2019 11:54

Linux 4.19.51

7aa823a

Linux 4.19.52

6500aa4

holtmann and others added 13 commits June 25, 2019 11:36

Linux 4.19.56

aec3002

Merge tag 'v4.19.56' into 4.19.x+fslc

c6cd7ef

This is the 4.19.56 stable release

otavio merged commit cda746f into Freescale:4.19.x+fslc Jul 3, 2019

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

4.19.x+fslc: upgrade 4.19.50 -> 4.19.56 #49

4.19.x+fslc: upgrade 4.19.50 -> 4.19.56 #49

schnitzeltony commented Jul 3, 2019

4.19.x+fslc: upgrade 4.19.50 -> 4.19.56 #49

4.19.x+fslc: upgrade 4.19.50 -> 4.19.56 #49

Conversation

schnitzeltony commented Jul 3, 2019