Boot the FujiNet to CONFIG

Needed:

• Working Atari 8-bit Computer
• FujiNet device connected directly to PERIPHERAL connector.
• USB power supply connected to FujiNet
• POWER switch selected to USB on FujiNet
• A working WiFi network ** You will need the SSID and PASSWORD for your network.

Steps:

1. Power on FujiNet.
2. Check for brief dim flash of all FujiNet LEDs, indicating FujiNet cold start is successful.
3. Power on Atari.
4. Listen for loading beeps.
5. Wait for CONFIG
6. Select your network - if your network is not available, try pressing X, and specifying your network via the keyboard.
7. Enter your network Password.
8. Make sure Hosts and Disk Slots appears.
9. Test complete. Power off. Atari. Press Reset on FujiNet

Expected Result:

• CONFIG should be running, with a blank hosts/drives screen.